Posted by Dave H (MI) on November 15, 2017 at 10:32:06 from (50.108.96.11):
I try to tackle something major every year late in the summer when things are slow. This year I decided it was time to start rebuilding the old dairy barn up by the road. It succumbed to an electrical fire many years ago. Close to 30 Holsteins were still inside. One of the surviving sons of the original homesteading family stops by from time to time to visit. He went in the east end of the barn and released all the cows along the south wall. Fire was too intense to get the ones on the north wall. They are buried just outside where I put the large opening. He said his dad was frantic...thought he burned with the cows. Only the milk house survived along with the north and south block walls. Those walls collapsed over several years...they had no rebar or grout in them...leaving only a stub of a wall headed south and west from the back of the milk house. The milk house was renovated by an interim owner and is now a sauna. I am rebuilding the 60 x 36 barn to use for small storage and shop shop space. The smaller tractors will go in there. I have a larger shed in the back where I store equipment. Took me 3 months of spare time to lay all those block. Just grouted the last row yesterday. Sits on a really good footing. I drilled in rebar and did bond beams horizontally and vertically as required. Steel lintels on doors and windows are part of the last bond beam. Don't know how many block total yet. I know there were 14 pallets of 8x8x16 alone and a lot of half block were used around doors and windows as well as 4x8x16 hollow core for the pilasters (added for visual effect because the original barn had them). Going to timber frame the rest and put a gambrel roof on the top. Pictures of the original were used to design it. Very popular project with people driving by. Original barn had paintings of the cows on the block. Most common question passersby ask is "will you paint the cows back on it?"
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
