Tractor Talk Discussion Board |
Re: O/T- lean-to shed roof flashing?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Billy NY on June 10, 2007 at 10:14:57 from (205.188.116.14):
In Reply to: O/T- lean-to shed roof flashing? posted by dds-inc on June 10, 2007 at 09:56:06:
Photos would help, but probably not all that difficult to fasten something similar to reglet like is sometimes used on masonry walls that are pre-existing to an addition and have nothing built into the coursing of brick already. If you were to attach a piece of pre-formed metal, that would receive flashing, you just need to seal the vertical area behind it as it's attached to the T-111 siding, with a good sealant, and make a nice sealant joint on top of it. It would also be nice to have an overhang from the rood above on the main building. Someone else might have a better detail than this, but as long as you return up the vertical area that rises above the roof you joined to the wall with some kind of metal like a reglet or similar, then you have something to tie into from the new roof. The pieces you attach to the existing wall need to be continuous, if they overlap beacuse the dimensions are longer, make sure to seal that joint, and I'd overlap them at least 1'-0" same with the flashing. Under neath this you could also use a material like W.R. Grace Ice & Water Shield, seal the top of the vertical return at the T-111, then place metal flashing as described above. Again, someone else may have a cleaner detail than this, but I'd think something similar would perform nicely.
Replies:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|