Re: Gasket Coatings
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by mm on October 03, 1998 at 16:45:15:
In Reply to: Gasket Coatings posted by Roger on October 03, 1998 at 14:49:14:
: I am sure someone has asked this question before, but I will ask again. What do people prefer for coatings (if any) on various types of gaskets. I have been given advice on head gaskets from no sealant to various spray on types (some head gaskets say on them to not use any gasket cement). Also, there are the gaskets that are on sheetmetal parts like oil pans. There are other gaskets such as the ones on cast iron parts. : I would like to hear what other people use. An old mechanic I used to know always used grease from a grease gun on gaskets and so have I at times as it works good to temporarily hold the gasket in place. : Roger Grease allows the gasket to move around while the head is being torqued down. I have had good luck with painting head gaskets with aluminum spray paint before installing them. On soft copper head gaskets use gasket cinch. It is historically a motorcycle product. Naturally you can get it at the motorcycle shop. Later.
Follow Ups:
Post a Followup
|