Posted by Case Nutty 1660 on October 16, 2016 at 05:43:41 from (75.127.24.87):
I just want to say my memory is just fine,, I have well over 45 years running working and setting Case combines,, I have also ran at times for others JD and MF combines,, I agree all should be able to be set to do a good job,, I am just stating what I have seen in my years,, I have now cut back on acres I cut every year,, for 30 plus of my years doing this I ran 800-2000 acres every year, cutting mainly Wheat then but I also did a lot of alfalfa and grass seed harvesting as well,, and of course Oats and Barley,, also raised and cut Camelina, Millet and Safflower oil seed crops,, the pics are of three of my Case machines cutting 100 bpa plus winter Wheat on my farm,, all three machines had the largest heads they could have,,, in this crop I would have liked a smaller size but by slowing down and knowing how to set them I was able to save almost all grain and stay in the 1-2% dockage and zero cracking. the man in the pic is my Uncle John,, this was the last time he got to run a combine, great memories for me, for those of you who can tell how a machine is working and if its set properly look at the windrows of straw that tells the tale to me cnt cnt
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
