A local parts source and repair facility is very important when looking at brands. No matter how good the tractor is it will need some kind of maintenance or repair over time.
With your local repair guy being more familiar with Fords and more likely having a lower shop rate than dealers I'd be looking at Fords more than other brands.
I am a little biased being a Ford owner but I recommend looking at a 4000SU or 4600SU.
These tractors have the heavier planetary drive rear axle with inboard wet disc brakes, independent pto and hp of the larger 4000 but use a 3000 style sweep back front axle and 28" tires making them low profile, easy to maneuver, but is a heavier more stable platform than any other tractor in that size range.
For larger jobs or handling heavier pieces of equipment I'll use my regular 4000 or 5000, other wise I'll use my 4000SU that's lower profile to get under low objects, turns tighter, maneuvers better it tight quarters, has plenty of power and the extra weight helps with traction.
At nearly 61 years old one less step getting on and off the tractor is also a plus.
A sweep back axle is not the best front end for loader operations but if not abused it does an ok job.
I have two quick attach loaders that are only mounted on the tractors when a loader is needed and taken off when the job is done.
With the number of times an empty loader has got me stuck I will never again own a loader that can not be easily removed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
