Posted by Long Hill on July 19, 2016 at 12:26:33 from (184.171.195.183):
In Reply to: MF 135 loss of power posted by Long Hill on July 19, 2016 at 06:09:14:
Quoting Removed, click Modern View to see
How can I measure the blow by, what is acceptable? Thermostat maintain the temp between 180-190, oil pressure is good 50 psi cold down to 45 range when hot. I just cracked all the injectors one by one and seems like all pistons are firing on iddle. I found that the air filter hose was cracked and collapsing somewhat because of the succion but that has nothing to do with it as I remove the hose and same problem. I created a leak tightening the injectors and one return is leaking a bit. The #2 injector is also wet at the junction between the two halves. I plan on checking the spray pattern by pivoting the injectors out and cranking it, would that be a good way of testing that? The coolant seems fine, the smoke definitely smells like unburned fuel.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.