Re: vibration on JD 50
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by JDGnut on September 22, 1998 at 10:30:17:
In Reply to: vibration on JD 50 posted by Neil Wertz on September 21, 1998 at 16:14:43:
: I just bought a JD 50 and it is in fairly good shape, but it vibrates fairly bad. The engin was overhauled before I bought it, but I had to finish putting the some of the stuff on. If you have any idea as to what it may be please let me know. Thanks Neil : Check the fly wheel and the clutch. The flywheel should have a V mark on it that sould be lined up with a V mark on the crank shaft. If the marks are missing, it gets a little tougher. On the clutch the letter series had a counter balanced disk in them but most numbered series did not. Just pop the center cover off the flywheel cover and look at the end of the crank. Good Luck JDGnut
Follow Ups:
Post a Followup
|