Posted by formerly ny bill on February 22, 2016 at 03:36:27 from (74.65.91.128):
In Reply to: Holy Moley! posted by FordNewbie on February 21, 2016 at 18:47:03:
you are right- if the tread has started separating from the casing, tire probably won't last very long. do you need 1 tire or 2? check local tractor parts yards. there should be some supply of decent usable 18.4x30 tires already mounted. save mounting charges. if you aren't doing tillage, you don't need brand new tires. tread pattern needs to be going the correct way, or you will have to change it anyway. good idea to add air with the valve stem on top- if the tire is loaded (water + ?). that keeps the calcium out of the valve core and pressure gauge = less corrosion= longer life. another point- you don't want one side loaded and the other side not- depending on what you find used. tractor won't pull right unless you add wheel weights to the unloaded side so weight is similar on each side. i like firestones. a little cheaper alternative would be BKTs. if you are buying new.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.