Re: MF-180 Power Adjust Wheels
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Mac on September 14, 1998 at 19:44:46:
In Reply to: MF-180 Power Adjust Wheels posted by Quentin on September 14, 1998 at 10:33:43:
I have a 1130 with the power adjust wheels and it had the same problem. I removed the wedges and welded between the ears to replace the worn down metal. Be careful not to add to much, you should be able to see the original wear surface along the edges. This fix worked great on the big tractor and it should save you some money. : I have traced a problem w/"clunking" noises and wheel movement to the cam bolts that tighten the MF wheel against the rail slides. There is an eared insert inside the retention assembly that is pushed up by the cam bolt. These have warn down to the extent that they no longer hold the wheel tight. Local dealer says they can no longer get these, & some I purchased from salvage yard were worn as much as mine. : Any suggestions as to where these can be obtained? Thanks for your assistance!
Follow Ups:
Post a Followup
|