Posted by jon f mn on January 16, 2016 at 20:46:34 from (70.198.128.137):
In Reply to: dump trailers posted by ztrmower on January 16, 2016 at 08:16:19:
I looked up the 4 brands you listed here and this is what I see. I think the least attractive of the bunch is the PJ. Starting with it lists a 40° dump angle, that is going to have you helping with the unloading. You need at least 45° to get stuff out reliably and then wet dirt and some debris types are going to be trouble, at 40° that is going to be significant. I'm also not impressed by the 11ga tubing in the construction. Tubing, especially as thin as 11ga, is a rust through problem if you're in the salt belt at all. Other than that I don't see anything that causes me great concern.
The finnish line trailer does not list a dump angle anywhere I could find, so check that carefully. Remember you need at least 45°. Other than that they appear to be heavy made, the 3/16" floor and taller frame rails will make for a more durable trailer than the PJ. This one also has the remote control, so no wires, that should be handy so you can keep the control in the truck.
The delta list a 45° dump angle, so that is good. Looks to have a very heavy duty frame and is well designed as far as I can see. The 10ga floor is the minimum, but exceptable. The axles are the same as the others. This one also list the cordless remote control.
The titan also lists a 45° dump angle in the pdf download. The frame size is not listed, but looks ok to me, altho lighter duty than the delta or Finnish Line. The sides, altho only 12ga, are galvanised so that might be a benifit. They also use torflex axles which are very good axles and will never have a worn out suspension. They will also help if your tow vehicle is a bit on the light side.
So, if I was buying and money was not the issue, I like the titan the best. I like the PJ the least. The other 2 will be heavier and maybe a bit more durable in sone ways, but will be harder to pull and have less net capacity due to the heavier construction. For what it's worth, that's how I see them.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
