Posted by John in La on September 05, 2015 at 13:07:54 from (96.33.136.54):
Broke down and bought a new rotary cutter today. Been needing a new one for a while. The deck rusted out beyond repair on my old one.
Got a Howse model 500 light duty cutter. They list for $1139 on the Howse web site so when the guy told me $840 + tax for the cutter and 4 extra shear bolts; I told him I would take it. All of my other implements; box blade; scoop; middle buster; are Howse and have held up well so we will see how this cutter will do.
So now I need to decide what I am going to do about putting a chain guard on the front of the cutter. Not really interested in the rear guard but feel I should put something on the front for my safety.
I can buy the factory chain guard from the dealer for $175 This would be the easiest way out as it is bolt on.
I could buy a length of angle and a bunch of chain and weld up my own guard. Not sure if this would save a whole bunch when you consider my time.
Or I could most likely get some old truck mud flaps from work (for free) and cut them into strips and make a guard out of them. I've heard of others using mud flaps for this purpose but have never done it myself so really do not know how well it works.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
