It looks like it went up over the radiator tank. Funny how the letters went like they did. Looks like a 3600. You could make a brush guard that rises up from a standard front bumper that fastens to the front axle. Good excuse to pound out that one dent, the rest looks good, fix 'er up, make a brush guard if you are in these conditions often.
I've seen enough of what clearing or similar work can do, trees, downed limbs, branches, vines, widow makers, etc. Recently, the top of a tree we were working under closed off a trail made by a trespasser on another farm I help look after. The top of a willow tree snapped off randomly, hinged right over and stuck into the ground, precisely at the center of the trail! I have a few photos of it. Its mostly unpredictable, all of it. These are not common, but one had best be aware when in the woods, this would have killed had someone been under it.
A lot of people balk at having a loader on while doing field work, but for this kind of work, and I've done my share, a loader bucket is really nice to have. Just like when I bale hay, I leave the outside row for last, one time the pick up caught a piece of cut/split firewood, that somehow was inside the perimeter, it walked in off the pile some how !!!! LOL ! Lucky it was seen and the baler stopped. Always crap on the outside, so at least if you break something, just the outside row is left. If the perimeter is brush and trees, downed, leaners or what have you, cut the middle, then go around and push in the sides, or just leave it. I have one line that is loaded with widow makers, I will have to clear all of those before I go in there to mow. My old 850 with a wagner loader has cleared some of the worst of field perimeters here. I did pull the return hose off the reservoir once, and got a good size stick to hit the distributor cap, easy repairs both of them could be worse. I was doing this work after an ice storm from the previous winter, hundreds of acres of field perimeters, finally got a piece of staghorn sumac to poke into a small coolant hose on a JD 3150, never saw it.
I cleared a path down a slope near my house, a bit steep, but made easy access to the back of the place from the yard. Cut with a chainsaw, cleared by hand, all looks good. I head down with the D7 and half way through, some kind of vine winds up in the track or something and off the bank on my left comes a good size piece of dead elm, smacking me right in the side of the head, hard enough it would have dropped me to my knees, but I was sitting. Set the blade down and had to take a break, never saw that coming.
I've had limbs and sticks come through full brush cages too, hard to predict what can go wrong when in the brush.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
