Re: Re: tire weights
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Paul Stanley on August 31, 1998 at 23:12:17:
In Reply to: Re: tire weights posted by gopher on August 31, 1998 at 22:58:29:
: : : : : As the resut of a tire repair, I nowI need to replace the calcium cloride mix in one of my 350 international tires . : : No one around here can tell me what product to use, the mix ratio, the amount to install, and most importantly, how to do the installation myself. I found this in the archives.If you are still interested, the procedure is as follows:First raise wheel off ground, remove stem & allow air to escape. Next a mixture of calcium & water mustbe PUMPED into the tube. The valve should be at 12:00 position. I used a small roller pump & it must be cleaned completely after each use! The amount of fluid depends on the tire/wheel size.Fill tube until whe water mix will run out when the wheel is rotated to 1:30/2:00 position. After filling tube/tire, add air pressure to 8 - 10 psi. If you give me your tire size I have a chart in my Oliver manual that has a mixture ratio. : : Can anyone out there help me with this back yard brain surgery project. : : Thank you : : larry thomas : Any shop that sells tractor rears and has a service truck should be able to help you.
Follow Ups:
Post a Followup
|