Posted by rankrank1 on June 10, 2015 at 19:12:06 from (166.137.12.118):
In Reply to: Is It Do-Able? posted by Bryce Frazier on June 09, 2015 at 13:55:38:
Quoting Removed, click Modern View to see
If its for the haying adventure Why? A super M will not have live PTO either so in that regard will be no better than your h. While it will have more hp than your h it will be such that you really only have 1 decent gear (2nd) for cutting with your 990 mower conditioner - as 3rd will likely be too fast in most situations. supers have faster gear sets.
At least on your h you have 2 gears to use on the swather. 2nd and 3rd gear on a plain h or m are perfect swather as you call your mower conditioner gears. The h will be a miser on fuel too. Super M will drink it.
Now if you talking SMTA, 400, or 450 then I can more easily see the allure or if you just want it for wants sake...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
