Correction on the TV HV circuit; like I said it's been a long time.
The rectifier was a negative half wave (6BK5 as I recall, tall tube with a high voltage cap on it, was in a tin shielded area because it produced X rays due to the high voltage and the rays burned the glass envelope to a brown tint). Reason was that the 26kv was fed to the cathode end of the picture tube. Had to be negative as electrons are what made up the beam and being negatively charged, they traveled to the unlike charge, +.
The control grids (first grid out from the cathode) had the video (BW picture) and were in the -150v give or take and the next grids in line called "screen grids" were the color gun grids were up in the hundreds. Then there was the accelerating anode, part of the gun at the far end (toward the face of the tube) which was at ground potential. So inside the gun (3 guns for a color TV) you launched the electrons via cathode heating (filament power) of the phosphorus coating of the cathode which emitted the electron beam at a - 26kv, pulled forward (accelerated) by the low voltage grids and finally the grounded accelerating anode and by that time they had so much kinetic energy that they kept on going and hit the phosporous coating of the picture tube face and produced luminance.
Color sets had a "shadow mask" that helped the electrons from each colored gun, strike their respective phosphor dot on the rear of the face of the tube. By sending the color information to each grid, you could produce different colors (aka color wheel theory) by varying the voltage on each grid which varied the intensity of each color to obtain the desired hue. Skin tones (hues) were the toughest to get right and hardest for networks to repeat, network to network, program to program in the early days. Forever jumping up and changing the color controls every time a different program came on. Today it's totally academic.
I tell you what's neat. Today's digital TV, No bulky vacuum tube with a long neck protruding out the rear, no high voltage, no weight, no filament heat, NO CONVERGENCE MAGNETS, great cheap price, work forever, everything has a nifty remote control (even air conditioners), integrated entertainment centers are a dream.......wow we live in the right era in history.....the glass is more than half FULL!!!!!!!!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
