The IH Cyclo planters use a central hopper (with all your seed in it) with a compressor that pressurizes the hopper. Seed spills out of the hopper into a rotating drum. There are several types of drums and you can swap them out very quickly. The drums have holes and the pressure from the hopper forces air out thru the holes. As the drum rotates down thru the seed each hole picks up a seed and holds it as the drum rotates up. Near the top, rubber wheels on the outside of the drum block the hole, release the pressure, and the seed falls into a funnel and is carried down a tube by the pressurized air. It happens pretty quickly, the seed is at regular intervals determined by the spacing of the holes in the drums. Monitor tells you if the seed is coming at the correct interval. Mine is an 8 row and I used it for the first time last year. Set it up according to the charts. Really very basic, not rocket science. My population was excellent, spacing was exactly what I had planned. I did not pay very much for the planter at auction. Definitely go with an 800 or 900. Many 800's still in use upgraded with 900 parts. I don't want to argue with JD Seller, he has been one of my mentors the past year and you won't get me to say a word against him...other than to point out that he is "JD Seller"...ROFL!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.