My 4440 is the best machine I own and I have much newer. I am 6'4" and when I stand on the lift arms in the "up" position I am eye-to-eye with anyone in the operator seat. They raise plenty high.
I've got lots of Deere machines around here and I cuss their three point for one reason or another. I think IH had that one down way better from operator standpoint. I would second the bottom whole comment for the third link. The connection is mechanical for those, so have someone operate the linkage (when it is off) while you stand behind. Look on the right side just under the cab(imagine just under the operators arse) and you will see the linkage moving. There are some bushings in the pivots and if those are gone it will make lots of slop for you. Having said this, I just worked over the hydraulic linkage on the 7800 so it is possible I am confusing the two, but I am about sure that is right. I haven't been out to the shed and am still having my coffee!
You got one of Deere's best tractors be good to the quad shift and follow the guide in the cab. That's an expensive repair if you don't. The are very robust engines and tractors. The only weak point is that stupid A/C compressor. Get ready to replace it every two years. That cab is a crockpot without it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
