Posted by Bkpigs on November 23, 2014 at 20:41:54 from (50.103.244.174):
Built a new shop and I am going to run the power in conduit. Currently the power meter is on another barn with horrible wire and fuse panels. I want to move the service panel to the shop but leave the meter on the old barn since it is there and little worries about overhead clearance where it is. I bought some 3-O wire at a sale (200 amp wire), about 400 foot for 3 dollars. So I am going to run it in the conduit so I can upgrade the service to 200 amp if need be in the future. Right now I have 100 amp service with a 100 amp fuse immediately after the meter. So my idea is the 100 amp fuse would protect the meter and line from overload. The only problem is I need a way to connect the 100 amp wire to the 200 amp wire after the fuse. I don't think the lugs on the fuse will be large enough for the 200 amp wire and I would still need a way to splice in the neutral wire. Do they make a box with three isolated lug pairs for something like this? I would image at some point there would be a need to connect large diameter wire like that. Thanks a bunch.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
