Justin your finding out why three point back hoes are not very popular anymore. The better ones actually have a complete hydraulic system ran with a PTO pump. The hydraulic flow is in the 25-30 GPM.
The hydraulics on a JD 4010 just are not in that class. They where 13 GPM ( This what my IT manual says). That will seem real slow compared to an actual construction back hoe.
As for "power" most three point hoes seem that way. Most tractors just are not as heavy as a "real" back hoe. So the designers usually do not have real large bore cylinders on the hoe. Look at the boom and stick cylinders compared to your Case back hoe.
Also your JD 4010 is a 2250 PSI system. Many modern back hoes run 3000+ PSI systems. I just looked up my JD 310J hoe's flow/pressure. It is rated at 28 GPM with 3650 PSI at the hoe, 3200 PSI at the loader.
So the grand sum of it a Three point back hoe is limited in speed and power compared to a industrial hoe.
This is why small track hoes are gaining market share. They will out dig just about any three point or even skid steer back hoe attachment.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
