Diesels are expensive, unforgiving beasts! Take no shortcuts or you'll be going back in there again!
What did the rest of the oil look like? Was is emulsified with anti freeze? If there was clean antifreeze sitting in the bottom of the pan (before the head was removed) and the rest of the oil looked normal, that means the antifreeze got in there while it was sitting, not running. When the rod bearing spun, possibly the piston pounded the bottom of the head, started the head gasket leaking, or even damaged the head, don't know how bad it got...
If the oil was emulsified with antifreeze, it was getting in the oil before the bearing failure, and probably caused the failure.
Again, test everything, assume nothing! Now would be a good time to pressure test the oil cooler, put air pressure in the oil port and submerge the whole thing in water, watch for bubbles.
I hope you have a repair manual, if not that will be the most important purchase you'll make! Somewhere in this overhaul, you'll get a machine shop involved. Don't let them assemble anything! Double check their work, measure everything yourself or have a second party do it for you! Finding a reputable machine shop is the hardest part of the whole ordeal, second only to paying for everything, and the goal is to do that only once!!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
