I understand the sentiment. The thing is, with the cost of parts and labor now days, it's often cheaper to change a whole assembly, like a carb, rather than to rebuild the old one.
Since I work for myself I will almost always rebuild rather than replace on something that is mine. If it's a customers, I will weight the cost difference, as well as the difference in quality of the rebuilt part -vs- the new part, and do whatever works best in that situation.
As a simple example, I've got a customer with a chipper. He was paying nearly $50, plus two trips to the saw shop, to get his knives sharpened. Doing things that way, the shear bar had to be adjusted ever couple of grinds to insure a proper clearance. Too, the knives all had to be installed the right way to insure the sides that were ground together (and were the same length) stayed together, again to maintain adjustment. I finally convinced him that a new set of knives was less than $100 more than having a set reground. By the time you took into account time and gas for two trips to the sharpening shop, the extra time to insure the knives were all on right, and the clearances were right with each blade change, etc, etc, having them sharpened didn't make sense. Now he simply buys a set, flips them when dull, and gets another new set.
It seems like a waste to throw away blades that can be sharpened, but ultimately it costs more to sharpen them than to get new ones each time.
In the end, things just aren't like they used to be in any way, shape, or form....and it takes a lot of getting used to for those of us that still see the waste (like with the blades), when it's the waste that's making money.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.