Posted by Bryce Frazier on July 01, 2014 at 20:24:27 from (67.142.182.27):
Hi all, first question, the neighbor ground up the hydro pump in his Ford 4000 farm tractor, it is a European Model, and they JUST got it. They are wanting to use it for haying, and I am "in charge" of getting it fixed... Soooo, what am I looking at for a repair, and which part of the tractor should I break in order to get to it? I can split it right underneath the seat, or underneath the dash...
2nd question, they are in the market for a 3 point plow for their Ford 5000. It has a 6000 engine in it, and loaded tires. It is a really strong, good pulling machine, I personally THINK that it would handle 4 x 14, maybe 16? But I would really like to know what you guys think? We have lots of rocks. The soil is usually soft, but there is a good amount of clay in it. I am looking around on CL, and I have seen a couple of 2 way, 3 bottom plows, but I don't think that the machine would pick one of those up! Plus, I am not really a big believer in 2 way plows, but if you guys would be willing to point out why they are good I would be MORE than happy to learn! Thanks, Bryce
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.