Re: Re: Re: 9N timing
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by E.Allison on July 27, 1998 at 12:07:08:
In Reply to: Re: Re: 9N timing posted by William on July 23, 1998 at 19:23:08:
: : : How do you check timing on a FORD 9N? : : You must remove the distributor and check the shaft angle : : when the points just break. I recomend that you get a copy : : of a service manual. I've got a early 8N with the same : : distributor : Thanks for the reply, I got the manual, set the : timing, took the gas tank off and dumped a lot : of gunk and water out of it. I did'nt have time : to get it all back together today ,I'll finish : tommorow I hope. One thing that I noticed when : I had the distributer off is the end of the cam : slot that matches up to the dist. was slightly : worn. Was yours like this? do you think it will : give me problems? Thanks, William I didn't notice much wear at this point but the front bushing of my distributor was worn. Didn't seem to make much difference as the tractor runs great.
Follow Ups:
Post a Followup
|