Posted by Zachary Hoyt on May 18, 2014 at 11:53:48 from (184.12.67.174):
There are several electric meter boxes here with old buried services that used to run to mobile homes that used to be on the property. I am wondering if anyone has been successful in digging up this wire and reusing it. I have a 50 amp plug for the welder but it is in the main building where we live and in order to weld I would need to put the welder inside and run the leads out the door and through the greenhouse to the lawn. If I could get about 70 or 80 feet of good cable I could run the line through the building overhead and out to the woodshed and learn to weld under the pole barn, which means I could work on rainy days. The meters have been removed from the boxes by the power company after we removed the trailers, but the wire is still in the ground. The trailers had 100 amp service so I am thinking the wire should be sufficient to carry power to a 50 amp receptacle, but I am not sure how best to go about digging up a wire without damaging it. I am guessing that by hand with a shovel is the way to go, maybe digging above where I think the wire runs and then pulling it up through the last few inches so as not to nick the insulation with the shovel. If anyone can advise whether this is a feasible idea and if it would be safe to reuse 30-40 year old wiring I would appreciate it. I know this is a kind of odd question. Zach
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.