My thoughts on it are that you will simply be going to a naturally aspirated engine. Turbochargers pressurize the cylinders BEFORE and during the combustion stroke, further pressurizing the cylinders prior to combustion. It could be that the fuel mixture is richer for the turbo to make up for the increased air mixture, but that should be it as far as mechanicals go. Removing the turbo isn't going to break anything mechanically. Worst case, my thoughts, you may run richer because will have less air pressurized into the mixture. Give it a shot an see how it runs. You are not going to break anything by lowering, easing the pressure in the cylinders. You won't have the increased HP of a turbo, but depending upon where your crack is, if its losing pressure now, you already don't have the increased pressure, and may be running worse than a naturally aspirated engine because the impeller of a cracked housing losing pressure is blocking air flow, in essence.
You're already broke now, right? Take it off. You may run richer, but you aint going to run leaner, and lower pressure in the cylinders aint going to physically break a thing beyond lower HP. If it runs like crap, rich somehow, rejet through smaller injectors. What have you got to lose by trying?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.