With those, I'd opt for the "bought" attachment. I see these almost on a regular basis, listed on craigslist. Regular pallet fork tines, or whole with the quick tach set up for a skidsteer. $500 seems to be a fair price for a complete set, but I see them up to $700 locally. Once in awhile I have seen a deal on them, and as well as plain fork tines or other odd arrangements.
I needed a quick tach set for our tractor at the other place, for many years, and while I worked there, I went and bought a set. The tines were actually some sort of boxed in steel, hollow but from a manufacturer, possibly out of ND/SD painted yellow and red, can't recall, but a U.S. manufacturer. So I'm sure some engineering went into these, but the materials used, a person could make these, but given what they do, you had best know what you are doing. I'd have preferred the typical style, solid fork tine, whats on a fork lift, but surprisingly the ones I bought worked just fine, I unloaded many tractor trailers of pine shavings by palletizing them, heavy skids, no problems with those hollow ones, but... if you make them, they had best be right, when these break its never good.
The other thing was with the set I got was the spill guard on it, thick steel rungs high enough to prevent a round bale from rolling back, this set is universal, so if I built same, it could be used on any quick tach loader frame, so if you did build something, make sure it has a stout guard on it, someone else uses it, does not know and the load rolls off and back onto the operator, the set I bought was $500 and worth every penny, I could have just changed the tines, but they worked out to be plenty strong, these sure are a labor saver.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.