Re: oliver super 77 diesel injection pump timing to engine
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Diesel Dan on July 16, 1998 at 18:56:25:
In Reply to: oliver super 77 diesel injection pump timing to engine posted by gene on July 15, 1998 at 11:48:23:
Can help with basic timing,sorry no specs. Get engine on compression stroke on number one cylinder.Watch the valves or pull an injector to determine.Slowly bring engine up maybe 18 degrees before top dead center.(Check Specs) Remove the side cover on the injection pump. Near the bottom inside you'll see a gear rotating as you turn it.Turn it till you see a mark. This will put the pump on compression stroke. Install the pump and align the pointer on the front to the hub. Tighten everything up in place and you have it. Note when timing any engine always rotate engine in direction of rotation so as to avoid slack in the gear train. If you must back up go back several degrees and then start over. Good Luck, Diesel Dan (the pump man)
Follow Ups:
Post a Followup
|