Re: Roosemaster Diesel Injection
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Diesel Dan on July 14, 1998 at 17:33:11:
In Reply to: Roosemaster Diesel Injection posted by Dave on July 13, 1998 at 14:49:24:
Pull the pump. If you checked the metering valve and it was moving freely and the pump is turning (pull the rear end plate and see) and the shutoff lever is in the run position the pump will pump fuel. If it does not pump then and the tractor has been sitting as you say, the pumping plungers are stuck and diassembly will be required to repair. A return valve stuck or plugged return line as JR2 suggested will allow the engine to start but then go dead as the housing pressure becomes so great that the plungers will not move. Quick tip: If you suspect a plugged return break loose the timing cover on the pump while it's running if it clears up you"ve found the problem without break'n a line loose. When the cover is loose the housing pressure will drop and allow the engine to run. Diesel Dan ( the pump man) ROOSA MASTER specialist
Follow Ups:
Post a Followup
|