Posted by KEH on January 06, 2014 at 05:51:19 from (209.213.25.37):
Got neighbor's medium sized bull hauled to sale yesterday. Actually it's an older sale barn used as a transshipment facility for the sale 40 miles away. I had tried to move him before Christmas. He was penned and jumped up on the metal gate and mashed it down. The loading chute sloped down hill and I couldn't back up without spinning on the damp grass so we had gone to the trouble to unhook the trailer and hitch it to neighbor's tractor when we noticed bull was out. Same conditions this time but we hooked the trailer to the tractor before penning the bull and got it in place and hooked back up to the truck. The bull loaded easily. He found he couldn't jump over the 6 1/2 foot sides of the trailer. Got him unloaded at barn. After getting tagged he decided he didn't like being in the chute, walked up to a gate in the chute and jumped over it flat footed. He was still penned in and the guys were able to get him turned around and headed back down the chute to a pen. I don't know how high the solid steel sides and gate are on the chute, estimate 4 1/2-5 feet high, but he jumped it with no trouble. Didn't break down the steel gate though. Not the worst experience I've had moving cows and now it's done.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.