Posted by Don-Wi on July 22, 2013 at 20:25:10 from (75.205.56.50):
Brother moved a garage. It's a 16 x 20, we're gonna pour a pad here and transfer everything from our workshop into it so we can either tear that one down or move it, and then build a new 40x60.
I drove, we did the move at around dusk. Had a full police escort for the 2 mile trip, 1 in front, 1 behind, and 1 blocking trouble intersections and such. Was very uneventful once we got out of the alley and onto the street.
He used our 8 x 18' hay wagon, had to cut it down 4" on the sides to squeeze in the garage door. It's got heavy 16" truck tires on it, so the back ones with more weight got pumped up to about 80 PSI and extra planks were laid on the deck to help raise it up some more in the back.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.