Posted by Jiles on July 20, 2013 at 20:21:51 from (69.137.29.28):
I am a 67 year old retired Tool&Die Maker. Years ago, I could sharpen a 1/16" drill bit that would cut close to a new one. I did this free handed and without eye glasses or magnification.
Today, with my poor eyesight and shaking hands, I can barely sharpen a 3/8" bit.
This problem started several years ago, and I bought the top of the line Drill Doctor. I could not get it to sharpen my smaller bits but it did a somewhat acceptable job on larger bits.
I know that many of you have had great results with the Drill Doctor and that is great--it just wouldn't work for me.
A few days ago, I bought a General model number 825 Drill Grinding Attachment for the great sum of $14.98!
After a little practice, and experimentation, I can sharpen a 1/16 bit that cuts like new!
Strange thing is, it says the 1/8" is the smallest that can be sharpened!
I don't think these things are made today, so I plan to buy another as a backup.
I am sure many of you have tried this type sharpener, as well as the Drill Doctor, with mixed opinions.
I am thrilled that I can now sharpen a drill bit with this "cheap" machine!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.