Posted by Billy NY on June 08, 2013 at 07:37:57 from (72.226.79.200):
In Reply to: mortar question posted by ericlb on June 08, 2013 at 05:31:50:
Typically, CMU is 8x8x16, and = .89 SF per each CMU, x 41 CMU= 36.49 or say 36.50 SF.
8.5 or 9.0 cu.ft. of mortar per 100 SF of CMU, is a common figure for mortar with waste % included. So, if I am not way off or wrong with this calculation, say 100 SF/9.0 cu. ft. ( units are not the same, supposed to always keep units the same when estimating) is it 0.09 cu. ft of mortar per sq. ft. ? 0.09 x 36.50 = 3.285 cu. ft. of mortar ? Off the top of my head it seems proportional to the 8.5 or 9.0 cu. ft. per 100 sq. ft. 50 sq ft. would = 4.5 cu. ft of mortar, so at 3.2 cu. ft. it seems logical my math could be right, don't quote me just yet though LOL !
So if there was .75 cubic feet in an 80lb bag = 4.38 bags, say 5 80lb bags ? If there was .88 cubic feet per bag, then 3.2 cu.ft of mortar needed /.88 cu. ft. per bag = 3.6 bags. Typical CMU you are supposed to get around 13 CMU worth of mortar in one 80 lb bag, so 41/13 3.15, maybe I am in the ball park.
Quikcrete has a caculator on their website, I poked around a few sites to refresh my memory on the numbers, to see if my brain could deal with it this morning LOL !
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.