Posted by Christopher S. on January 29, 2013 at 16:27:26 from (67.234.26.81):
We have been looking into having the timber on our property harvested and had a few questions for any of you who might have already done it.
The quotes we have received specified that trees larger than 14" in diameter would be harvested. One company would pay us $3,500 less if we required them to use animals to pull the timber out of the woods.
1. What are your opinions on a tractor/skidder versus using animals? Is the $3,500 well spent on animals?
2. What should we expect them to do with the tree tops, the gentlemen we talked to said they leave them in the woods where they cut them.
3. What stipulations or rights do we have as far as them building a road to get to the farther corners of the property? Do they stone it, restore it and seed it after they are done?
4. They will also be using our driveway as part of the haul road, will they maintain it, will they build it up if it falls apart?
5. Is there anything else I need to know before we commit to someone. We value your guys knowledge.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
