Will You are smarter than you thought, figured it out & not realized it. IIRC, your plow tail wheel does not move when raising the plow, just acts as a depth guide when plowing. When you raise the plow, pressure is exerted on the main wheels, raising the shares. Since the rear of plow is heavier than the hitch, it would tend to stay down & raise the hitch. With the chain adjusted right, the drawbar holds the hitch down, so the chain raises the rear of plow, keeping the rear share from scraping the ground. With the plow in the ground, move the chain in the notched bracket to allow 2 or 3 links of slack. If hooked to a tractor with different height drawbar, move it 1 or 2 links to make up difference. Older JD plows had a solid rod arrangement to do the same thing. Free floating, with a crank type nut for adjustment. That's my opinion, maybe someone will challenge me with a better one. Willie
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.