Posted by Don-Wi on July 01, 2012 at 20:17:32 from (75.207.81.75):
Dad got a small jack hammer and I busted up and repoured the corner wheel for the barncleaner that broke out (pulled the studs out of the concrete) about 1 1/2 years ago (dead of winter if you do the math). Dad had it fixed to where it had a bar over the top of it and if you parked a tractor over that, it would work ok for the job. Last year for whatever reason we never got to it. Then snow came and we surely weren't gonna go several days in the winter without it, so it had to wait again.
Finally got some time where we didn't have to do some sort of field work, so I busted it out and repoured it. I made up a better anchor for the corner wheel this time. 2 6" grade 8 bolts welded to a plate of steel 3"x8"x1/2" or so thick, on the spacing needed for the base. Put that in and some wire mesh over the top of that, and those bolts shouldn't ever pull out. Gotta wait a few days for the concrete to set, and then we can put the corner wheel back in and put the chain together again. Then we'll just have to go through the rest of the corners and replace the pins and rebush the wheels before winter comes.
On to fixing the 970 wagon and my 1600's hydraulics.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
