Posted by Billy NY on June 10, 2012 at 06:11:31 from (67.248.100.3):
I've never been one to use "dump in" solutions, most "snake oils" etc., rather fix the problem regardless if its major work, but recall hearing about this and was wondering if any one has ever used it in a cooling system,
Here is why, time to start mowing again, and I'm still running this old 850 Ford, 4 cyl. 172 motor. For the life of me, I cannot find the coolant leak, and it leaks down enough to put 1 up to 2 gallons in it, maybe 2x per year or so. I thought it was a head gasket, oil is clean and has never gotten any coolant in it. Upon a closer look at the block over the years, it appears to be porosity in the casting, as the leak literally seems to come "through the wall" with no trail from a hose, not the radiator, or water pump. I did put a thermostat in it not long ago, fixed my gauges some time back, this tractor was really kind of worn and abused, figured it would have been parts by now, might run up to 200 Deg F when really working, 40 psi or so on the oil when idling, so along with what I have fixed on it, not a bad runner. First time, I've never been able to source a leak, seems to just appear on the side of the block, you can smell the vapor when running hard in tall/thick grasses. Was wondering if the black pepper or similar would be appropriate, seeing its likely to be porosity, and I do not have a high pressure cap on the radiator either, learned how those find leaks for you when I was a kid.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
