Okay I took a quick glance at the photo but obviously cant tell whats in the conduits n what goes where HOWEVER I CAN TELL YOU THIS:
If you have a generator and you
1) Want to switch/transfer 120/240 volt single phase three wire typical home service from the genny or the utility, and
2) If you ONLY use a two pole transfer switch (switch the two hots NOT Neutral)
A) THE UTILITY NEUTRAL AND THE GENNYS NEUTRAL GET BONDED TOGETHER
B) The utility Neutral (and consequently gennys Neutral since they are bonded) is bonded to a grounding electrode such as a driven ground rod or rods
C) The equipment Ground Buss and the Neutral Buss in the main panel are bonded together.
D) You carry an equipment grounding conductor from the main panel out to the gennys metal frame the same as you carry it to any non current carrying metallic junction box or appliance etc
E) AT THE GENNY YOU DO NOTTTTTTTTTTTTTT bond the genny Neutral to the frame and if its already there then you must sever that connection
If the genny is A SEPERATELY DERIVED SOURCE and you use a 3 pole transfer switch (i.e. you switch the neutrals) then this is all different.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
