Posted by dave2 on April 01, 2012 at 04:32:05 from (139.139.35.70):
In Reply to: Clear coat??? posted by showcrop on April 01, 2012 at 04:25:33:
I have seen some tractors at auctions that have had that treatment, and my neighbors once bought one that way. It sure was shiny when they got it delivered, but it didn't last more than 3-4 years. The coating was peeling on the ones at the auctions too. I'm sure that it was due to lack of prep. If you take the time to clean well, scuff all the good paint, acid wash all the rust, mask or remove parts that shouldn't be coated, then the coating would adhere for a few years. Buuuuuuut, that is why people use primer. If you are going to do all that necessary prep work, you may as well get some value for your time and shoot primer so that the topcoat will adhere for 15-20years.[/quote:bb88219bf0]
After I posted this, I was playing on google and found a thread from a year or so ago (from here also) talking about WD40 and (also) linseed oil. May try the linseed oil (since I have several cans on hand) on a couple parts and see what happens. A side effect I hope to get out of it is making it easier to hose off dirt/mud. Won't have a peeling mess that way either.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
