I have put Geo systems in 4 houses now for the new home owners. The first was with a well system. They couldn't get deep enough because of rock so they had to put in 4 wells instead of 3. The other 3 houses we put in the "slinky lines". These are trenches 8 ft. deep about 100 ft. long. With the line coiled like a slinky, you have about 700 feet going out and 100 ft. of line coming back. That is in each of 3 trenches. The amount of lines needed will depend on the size of house or unit you install. Generally 1 line per ton of heating size. We went to the "slinky" lines because of costs and the fact we could do them ourselves. The well system is still the most efficient though.
All the home owners are real satisfied with the way they work and the costs of their heat and cooling bills. Up front costs are slightly higher than a good heat pump system but the govt. is still giving a 30% tax credit for the costs of the complete installation. In a new home that can include the cost of the duct work also. The last one I did, the homeowners got a $5600 credit for the system. That was a check mailed to them for that amount. Here in SD, you also qualify for a reduced property tax rate if you install one. This is good for the first 4 years you own it. The electric company also offers a reduced rate on the electricity used. The last house gets it for 1/2 the price of the rest of the house. It is on a seperate meter which also can include the water heater. The geo furnace also heats the hot water to 125 degrees so that lowers your water heating bill also. Another electric company also offers a rebate as high as $600 at the time you install one but doesn't give as good of a break on the rates. The best would be to check with your utility company on that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.