Posted by ericlb on March 07, 2012 at 05:28:10 from (72.173.192.59):
as many know on here i wont buy a new truck , i cant fix 'em , now my newest, is a 94 dodge 2500 hd, with the cummins and automatic overdrive, yesterday it decides to learn a new trick, when driving down the hiway at 60 or so, upon deceleration, the transmission, comming out of lockup have a pronounced "bump", it only does this in od with the converter loced up, when i disable the od feature, [ button on the dash] the truck doesnt do this, all gears work normally, im thinking the torque converter is on its way out, even though the entire transmission and converter was replaced about 60,000 miles ago, [truck has a quarter million on it] i plan on having a shop replace the rear main seal in the engine which on the cummins is done by removing the tranny, so the converter could be easily replaced at that time, question is, 1, is that whats wrong, and 2, will it hurt to drive the truck for a few weeks in the meantime?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.