Posted by John T on January 22, 2012 at 07:39:36 from (71.52.113.165):
In Reply to: fuse/circuit breaker posted by Dave Sherburne NY on January 21, 2012 at 19:18:24:
While either will work and both have advantages and disadvantages, since its an antique auto Id use a fuse instead of a circuit breaker.
To size the fuse and circuit wiring gauge you
FIRST determine the total actual load CURRENT by adding all the lights total wattage and divide by the voltage Watts = Volts x Amps and Amps = Watts/Volts
SECOND you determine the necessary wire gauge, as an example Id use 12 gauge if the continuous load was say 16 amps,,,14 gauge if the continuous load was like 12 amps etc but I wouldnt go less then 14 gauge regardless
THIRD size the fuze to protect the wire (its amp rating) as an example if the wire is rated for 20 amps you can use a 20 amp fuze, if the wire is rated for 15 amps use a 15 amp fuse etc
YOU DETERMINE THE LOAD,,,,,,,,SELECT THE WIRE TO HANDLE A CONTINUOUS LOAD (I use an 80% safety factor i.e. if the wire is rated 20 amps I dont like more then a 16 amp continuous load) THEN SELCT THE FUSE SIZE TO PROTECT THE WIRING
As a pure guess youre probably lookng at 12 gauge wire and a 20 amp fuze or 14 gauge wire fused at 15
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
