Posted by Rich_WI on November 07, 2011 at 17:42:44 from (50.50.123.216):
In Reply to: ot Freezer update pics posted by N. TX Tim on November 07, 2011 at 16:37:40:
Do you get any cold in the freezer at all now? From your other post, it sounded like it worked once in a while... or was that ONLY the light that worked once in a while but you didnt ever get cold now?
The reason I ask is, because your first picture shows the start switch, which does the same thing as a start capacitor. These go out very frequently, about 90% of the small fridges and freezers you see on the side of the road have one of these failed. Fix the switch and the fridge or freezer works fine.
The switch allows the compressor to start, when a switch dies, sometimes the compressor will still start, sometimes it doesnt. Sometimes it fails and you can get the freezer/fridge to run by unpluging it and then plugging it in again. If your fridge/freezer starts and hummms but dont get cold, put your hand on the compressor. If its warm/hot, its because the compressor is locked and getting hot. Thats a sign the start switch has failed. If you are having a problem with your fridge/freezer working and then stopping and then working again, its almost 100% chance its that start switch. Its stupid easy to test too, most compressors are made by the same company so you just need a known good working unit and swap that good start switch with your questionable one.
If your compressor is leaking oil.... well..... black friday sales are comming pretty soon, so you got that going for you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
