You would be wasting money setting up an IH 400 planter for no-till. It is way too light to do the job well. Plus the attachments would be next to impossible to find for it as well.
A JD 7000 or 7200 would be a good choice. A Kinze 2000 would work well too. To get a CIH no-till you would have to get into at least a 900 and you would be looking at bigger money then.
The JD and Kinze are the cheapest to find parts and attachments for. They have the biggest market share for a reason. That IH 400 of your is cheap for a reason too. They did not work the best.
To no-till you need a single disk opener(runs in front of the double disk seed openers), Trash wipers would be good too but not a drop dead thing, heavy duty down pressure springs, Spike or cast closing wheels if the ground is dry and hard. This is all you really need. I like the DAWN combination opener and trash wipers. They are well made and adjust easy. Yetter would be my second choice.
You will have a hard time finding a good used no-till planter if it has done many acres. No-till is hard on the planter. It is running in hard rough ground. All of the pivots and linkages wear faster. I would look for a good non no-till. Then add you own attachments. You can find good used attachments for the common JD and Kinze Planters. You need to start looking NOW.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
