Re: Re: Re: Re: Re: Re: Re: How do you remove bolt?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Chris on May 14, 1998 at 06:50:14:
In Reply to: Re: Re: Re: Re: Re: Re: How do you remove bolt? posted by Bonehead on May 13, 1998 at 16:01:21:
: : : : : The biggest danger in this exercise is breaking off the easy-out in the hole trying (1).
: : : : : ::::Bonehead : : : : No drill in the world will drill out a hardened piece of steel like that. : : Easy-Out = Two Lies in One.
: : I have never had one work but I have broken off a couple in the hole. If the bolt is so tight that it sheared off while torquing, it will be so tight that the easyout will break. Don't waste your time with them. Just drill out the hole as others have described, and if you're lucky the thread will be OK. If not, helicoil it. : ::: Lies? Them some pretty strong words partner. But ponder this if you can. A bolt breaks off when over torquing, because the tensile strength of the bolt has been exceeded. Once the head pops off, the stress is removed, if the hole is good and clean, the remainder can be removed with your fingers if you could get a hold of it. Beware of insults, I could call you a idiot, it would true, but it wouldn't be polite. Thats why I wouldn't stoop to that level. But then again?
: :::Bonehead Good thought Bonehead. Easyouts will work on some applications. But we all have learned through experience that you can't force them. I have had success when hot!! not cold. We all know nothing is easy in life, when the gentleman calls you a liar that means he should not have a wrench in his hands yet a checkbook and leave it to the professionals.
Follow Ups:
Post a Followup
|
