OK, as for the garden size it is about 125" long and 75' wide. I sorta figured one run of sprinklers down the middle working in a full circle would pretty well cover everything needing water the most, and those three heads in-line should overlap down the length of the garden. My initial thoughts were to use 1.25" black poly pipe for the mainline and insert tees and reducers for my uprights to mount the sprinkler heads on.
I didn't plan on trying equal a downpour (2+ inches) at a time! I figured I could run a tank of gas through the pump...about a gallon, which supposedly gives about 3 hour run time. That ought to be enough to give everything a good drink and if not, then I can run another tank through it.
I'm looking at the Harbor Freight 6 horse pump with 2" intake and exhaust ports and I think it is advertised at 35-40 psi and 150 GPM...using the 2" line......which I figure should deliver plenty of flow for the 3 heads even though the delivery line is reduced in diameter. As for the pump being too big, if that's the case, I'd think adjusting the throttle to a happy spot would regulate the output easy enough. These are just my thoughts on providing a simple solution. Maybe my logic is entirely wrong.
I have looked at the pumps sold at HF, Lowe's and TSC and other than the paint...they appear identical...they're all made in China and have Honda clone engines on them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.