Low Prices - Fast Shipping - Thousands of Items in Stock!

Order online or call (800) 853-2651

• Tractor Parts • Engine Kits • Carburetors • Manuals • DVDs • Hats • Books • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Forums • Tractor Info (YT)

Ford and New Holland [ Turn Off Pictures ]For 9N, 2N and 8N Parts, CLICK HERE.   Brakes Actuator Disc, Hand Brake - Dia: 4", 1-1 4" hub, 23 splines. Also replaces: D5NN2N625A & C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 & newer - UK), (2000, 3000, 4000 all from Jan 1972 & newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. (Part No: E9NN2N625AB) $31.47 [Enlarge Picture] Actuator Rod Seal - For Models: 4000, 5000, 7000, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2810, 2910, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, (5640, 6640, 7740, 7840, 8240, 8340 w 8x2 or 16x4 trans), 250C, 260C, 335, 340, 340A, 340B. Replaces E7NN2N336A, 85999093. (Part No: C5NN2N336A) $5.00 [Enlarge Picture] Actuator Rod Seal - For Models: 345C, 345D, 3550, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 4400, 4500, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 6500, 655, 655A, 655C, 655D, 675D, 750, 7500, 755, 755A, 755B. Replaces E7NN2N336A, 85999093. (Part No: C5NN2N336A) $5.00 [Enlarge Picture] Actuator, Hand Brake - Fits Tractors: (2000, 3000, 4000 all from 1965 & newer - UK), (2000, 3000, 4000 all from Jan 1972 & newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. (Part No: C5NN2N623B) $83.00 [Enlarge Picture] BRAKE DISC LINED - For models 3010S, 3830 Orchard, 4330 Vineyard, 4430 Orchard. Rpleaplces 5159830, 5119327. (Part No: S.62206) $23.01 [Enlarge Picture] BRAKE DISC STEEL - For models 3010S, 3830 Orchard, 4330 Vineyard, 4430 Orchard. Rpleaplces 5159830, 5119327. (Part No: S.62207) $24.46 [Enlarge Picture] BRAKE SUPPORT - Brake Backing Plate Support for 8N and NAA. (Part No: 8N2212B) $76.90 [Enlarge Picture] Brake Actuating Shaft - Shaft is 24 1 8in. long. Fits tractors: 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4110. Fits industrials: 230A, 231, 233, 234, 333, 335, 530A, 531. Bushing #S.66631 is available for $4.99 ea. additional, specify in "COMMENTS" when ordering, if needed. (Part No: C5NN2N247G) $45.87 [Enlarge Picture] Brake Actuator Assembly, 8" - For Models: 2810, 2910, 335, 340, 340A, 340B, 3900, 3910, 4000, 4100, 4110, 420, 4400, 445, 445A, 450, 4600, 4610, 515, 532, 540, 540A, 540B, 545, 545A. (Part No: D5NN2N317A) $92.84 [Enlarge Picture] Brake Actuator Rod - For Models: (5000 5 1968 and up), 7000, (5900 up to 4 1989), 5600, 6600, 6700, 7600, 7700, (5610, 6610, 6710, 6810, 7610, 7710 up to 4 1989), (7810 less cab), 7910, 8210. (Part No: C7NN2466B) $29.82 [Enlarge Picture] Brake Actuator Rod - For Models: (5610, 5900, 6610, 6710, 6810, 7610, 8010 all 5 1989 and up), 5610S, 6610S, 7610S, 7810S, 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. (Part No: E8NN2466DA) $25.16 Brake Actuator Rod Seal - For Model: Super Major. (Part No: E104FB9) $7.60 Brake Anchor Pin Retainer - For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). This item sold in multiples of 2, price shown is for 1. (Part No: NCA22286A) $4.30 [Enlarge Picture] Brake Back Plate Dust Seal - For Models: 501, 600, 700, 800, 900, 2000, 4000 (1958 to 1964). (Part No: NCA2217A) $5.04 [Enlarge Picture] Brake Backing Plate - Fits: 2000, 3000, 4110 (Dec 1966 & newer), 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 3610, 230A, 234, 334, 530A. (Part No: C5NN2212D) $149.90 [Enlarge Picture] Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $69.90 [Enlarge Picture] Brake Backing Plate Felt Seal - For Models: 8N, NAA, Jubilee. (Part No: 8N2217) $2.59 [Enlarge Picture] Brake Band - Brake band, for PTO drive clutch. For Models: 5000, 5110, 5600, 5610, 5700, 5910, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710. (Part No: E0NNB726AB) $35.89 [Enlarge Picture] Brake Cover - Cover, Brake camshaft hole. EXACT of ORIGINAL. Tractors: 8N, NAA (1948 TO 1954). (Part No: 8N2224) $4.80 [Enlarge Picture] Brake Cross Shaft - 16-5 16" long, 1-1 8" dia. For Models: (2000, 3000 up to 10 1972), (2110LCG, 3400, 3500, 4110LCG up to 10 1972). (Part No: D1NN2473B) $44.82 [Enlarge Picture] Brake Cross Shaft Bushing - OD= 1 1 4in., ID= 1 1 8in., Length= 1in. Fits: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500 (Part No: C5NN2N477A) $7.99 [Enlarge Picture] Brake Disc - 12" OD, 15 spline. For Models: (2355N, 2555, 2755, 2855N s n 668665 and up), (2955, 3155 s n 669174 and up), 3055, 3255. (Part No: AL65871) $96.63 Brake Disc - For 3550, 4000, 4200, 4500, all 1965-1975 Friction Brake Disck for Wet Brakes. 8" dia, 22 spline. (Part No: C5NN2A097B) $25.96 [Enlarge Picture] Brake Disc - For Models: 3900, 4100, 4600, Industrials: 420, 515, 532, 535, 340, 445, 540, 545, 550, 555, 650, 750, 5500, 5550, 6500, 7500, all 1975-1980. And for 3910, 4110, 4610, Industrial 555, all 1981 and up. Friction Brake Disc for Wet Brakes. 8" dia, 22 spline. (Part No: C5NN2A097B) $25.96 [Enlarge Picture] Brake Drum - For Models: 2000, 4000, 4110 with L Differential Lock 1965 thru 3 1968. Also for 600, 601, 700, 701, 800, 801, 900, 901 all after 1954. AN ADDITIONAL $12 shipping will be added to your order due to weight of item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 86533415) $111.95 [Enlarge Picture] Brake Drum - For Models: 1700, 1900, 1910. (Part No: SBA328510060) $170.26 Brake Drum - For Models: 1120, 1220 both from 1987-8 1993. (Part No: SBA328510121) $238.32 Brake Drum - For 8N, NAA, Jubilee. An additional $7.00 will be added to shipping per drum (heavy item). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1126) $103.46 [Enlarge Picture] Brake Drum - Fits 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 334, 335, 530, 531. Add additional $10 Shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1126E) $91.02 [Enlarge Picture] Brake Drum Repair Kit - For Models: 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit for 1 wheel. (Part No: 8NAA2250) $27.95 [Enlarge Picture] Brake Master Cylinder - For Models: 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100. Replaces 81869963. (Part No: F0NN2140AD) $319.90 [Enlarge Picture] Brake Master Cylinder Repair Kit - For Models: 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110, TS115. (Part No: F1NN2004AA) $55.95 [Enlarge Picture] Brake Pedal Return Spring - Fits tractors: 2000, 2300, 2310, 2600, 2610, 3000, 3610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 3400, 3500, 4110LGC, 530A, 531 (Part No: E1NN2472BA) $4.95 [Enlarge Picture] Brake Pedal Return Spring - For models Major, Power Major. (Part No: E1ADKN2456) $8.73 [Enlarge Picture] Brake Pedal Shaft - 18.406" in length. For Models: 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. The following items are available seperately, specify in "comments" when ordering if needed. Brake pedal return spring 83927277, bushing C5NN2N477A. (Part No: D9NN2N337FA) $71.75 [Enlarge Picture] Brake Piston Assembly, Actuating - For Models: 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100. (Part No: E9NN2N448AB) $91.26 Brake Repair Kit - For all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. (Part No: NCA2250) $58.95 [Enlarge Picture] Brake Repair Kit - For Models: 9N, 2N from 1939-1947. (Part No: 9N2065) $24.95 [Enlarge Picture] Brake Rod - Cross shaft to actuator shaft, 7-3 4" from center of holes to end of shaft, 3 8" UNF thread. For Models: 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 4110LCG, 530A, 531. (Part No: C7NN2466A) $27.26 [Enlarge Picture] Brake Rod Seal - For Models: (750, 6600, 6700, 7500, 7600, 7700 from 1975-1980), 5000, 5610S, (6610, 6710, 7610, 7710, 7910 from 1981), (7100 from 1965-1975), 6610S, 6810S, 7610S, TV140, TV145, TV6070. (Part No: 86576339) $3.65 [Enlarge Picture] Brake Shoe - Shoe, w lining, 2" wide. Priced each, shipped 2 shoes per box. (Part No: C7NN2218A) $28.22 Brake Shoe - Sold in multiples of 2. (Price shown is for 1 shoe). For Models: Dexta, Super Dexta. 2 Inch Brake Shoe. Replaces 81717217, 957E2019A. (Part No: M06-01-01) $34.65 [Enlarge Picture] Brake Shoe Adjusting Screw Spring - For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). Item sold in quantities of 2, price is for 1. (Part No: NCA22219A) $4.42 [Enlarge Picture] Brake Shoe Anchor Pin - For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Part No: NCA2333A) $2.64 [Enlarge Picture] Brake Shoe Anchor Pin Collar - 1" O.D., ¾" I.D., 9 16" Wide. For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Part No: NCA22218A) $2.64 [Enlarge Picture] Brake Shoe Lining Set - Includes 4 brake linings and rivets. For Models: Dexta, Super Dexta. (Part No: 957E2021B) $30.24 Brake Shoe Retracting Spring - For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). Must order in lots of 2. Priced each. (Part No: NCA2296B) $18.03 [Enlarge Picture] Brake Shoe Return Spring, RH Brake - For Models: 8N, NAA, 501, 600, 700, 800, 900, 2000, 4000 series (1948 to 1964). Item sold in quantities of 2, price is for 1. (Part No: NCA2204A) $2.42 [Enlarge Picture] Brake Shoe Set - Set includes 4 shoes with bonded lining. For 9N and 2N. (Part No: 9N2019) $63.95 [Enlarge Picture] Brake Shoe Set - Set of 2 Brake Shoes for Ford Compact tractors 1300, 1310, 1500, 1510, 1710. (Part No: 87344269) $83.85 Brake Shoe Set - Includes 2 brake shoes. For Models: 1000, 1600. Replaces SBA328100030, SBA328010020. (Part No: SBA328100031) $135.47 Brake Shoe Set - Includes two brake shoes. For Model: 2110. Replaces SBA328100042, SBA328100041. (Part No: 87344272) $106.04 Brake Shoe Spring, Primary to Secondary - For Models: Dexta, Super Dexta. (Part No: 957E2035) $4.90 Brake Shoe w/ Lining - 1 1 2 inch wide Brake shoe Sold in quantities of 4 priced individually. For Models: (2000, 3000, 4110 all from 1 1965 to 11 1966).`` Sold in quantities of 4 priced Each. (Part No: C5NN2218E) $26.50 [Enlarge Picture] Brake Shoe w\ Bonded Lining - 1 1 2 inch wide Brake Shoe For 2000, 3000, 4110 (12 1966 & up), 2600, 3600. Replaces C5NN2218F. Price is for each. Minimum order is 2. 4 required per tractor. (Part No: D9NN2218AA) $27.56 [Enlarge Picture] Brake Shoe, Set of 2 - Used on 1700, 1900, 1910. Replaces SBA328100061, SBA328100060, 83921593. (Part No: 87344270) $98.23 [Enlarge Picture] Brake Shoes - Set of 4. For Models: Fordson Major, (Power Major 1 1961 and up). SPECIAL ORDER item please allow up to 30 days for delivery. (Part No: E27N2019E) $249.74 [Enlarge Picture] Brake Shoes - Brake Shoes For 8N, NAA, Jubilee - Set of 4. (Part No: 8N2200B) $49.90 [Enlarge Picture] Brake Shoes - Brake Shoes with Lining For 600, 601, 700, 800, 801, 900, 901, 2000, 4000 (thru 1964) - Price is for EACH. Minimum Order is 2. 4 required per tractor. (Part No: NCA2218B) $25.67 [Enlarge Picture] Brake Show Hold Down Spring Pin - For Models: 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Part No: NCA22276A) $1.83 [Enlarge Picture] Brake Spring Retainer - For Major, Power Major. (Part No: E27N2285B) $1.50 [Enlarge Picture] Brake Spring kit - For Major, Poer Major. Kit contains( 1x E27N2035, 1x E27N2036, 1x E27N2034, 2x E27N2286B. (Part No: S.67147) $31.65 [Enlarge Picture] Brake actuator assembly - For Ford New Holland skidsteers: L555, L600, L783, L784, L785, LX665. (Part No: A158090) $119.90 Bushing - Bushing, brake cross shaft. Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side} For tractors: 9N, 2N, EARLY 8N {1939-1949}. (Part No: 782477) $7.62 [Enlarge Picture] Bushing - Brake cross shaft bushing. Press into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $5.25 [Enlarge Picture] Disc Brake - For Models: TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48DA, TC55DAT, 2310, 1720, 2120. (Part No: SBA328110161) $53.27 [Enlarge Picture] Disc Brake Lining Kit - Fits Super Major. Kit contains 4 linings with 48 rivets for 1 side, 2 required for tractor. (Part No: E1ADDN2284) $30.64 [Enlarge Picture] Intermediate Steel Brake Disc - For Models: (5100, 520, 7100, 7200 1965-1975), (5600, 5700, 6600, 6700, 7600, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc 8" dia. (Part No: C7NN2A097B) $38.35 [Enlarge Picture] Intermediate Steel Brake Disc - For Models: (5100, 5200, 7100, 7200, all 1965-1975), (5600, 5700, 6600, 6700, 7600, 7700, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc, 9" Dia. (Part No: C5NN2N315A) $18.86 [Enlarge Picture] Parking Brake Lever - For Models: NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Part No: NAA2782A) $19.90 [Enlarge Picture] SPRING, PEDAL RETURN - Brake Pedal Return Spring with disc brakes. (Part No: E1ADDN2456) $10.99 [Enlarge Picture] Spring - Spring, rear wheel brake disc return. Tractors: 3550, 4000 (except 4110), 5000, 7000 (1965-1975), 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 420, 515, 532, 535 (1975-1981), 2810, 2910, 3910, 4110, 4610, 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210 (1981-10 1991), 3230, 3430, 3930, 4130, 4630 (3 1990 & up), 5640, 6640, 7740, 7840, 8330 (with mechanical brakes) (11 1991 & up), 5610S, 6610S, 7610S, 7810S (1 1994 & up). (Part No: C5NN2N320A) $2.24 [Enlarge Picture] Spring, Brake - Spring, brake camshaft hole cover. Tractors: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N2322) $3.02 [Enlarge Picture] Stud, brake support plate - Stud, brake support plate. EXACT of ORIGINAL. Tractors: 8N, NAA (1948 TO 1953). (Part No: 350920S8) $4.25 [Enlarge Picture]   Clutch CLUTCH KIT - Single clutch kit assembly. NEW 13 inch PP with 2.5 inch hub. Includes 13 inch clutch disc, 1.492 hub, 25 Spline Rigid Drive Disc, New Release & Pilot Bearings with clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Part No: FD13P25RD) $285.71 [Enlarge Picture] CLUTCH KIT - Complete kit includes Pressure Plate, 13 inch 10 Spline Rigid Disc, Pilot Bearing, Release Bearing and Alignment Tool. For models 4600, 4600SU, 5000, 5110, 5190, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210 (Part No: D8NN7563AB-KIT) $219.90 [Enlarge Picture] CLUTCH KIT - Complete kit includes 13 inch disc, pressure plate, release bearing, pilot bearing and alignment tool. For Models: 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240, 8340, 8530, TS100, TS110, TS90, TW5. Replaces OEM 82006010 and 82011590 (Part No: 1112-6145) $319.90 [Enlarge Picture] CLUTCH KIT - Complete Kit includes pressure plate, 13 inch disc, pilot and release bearings and alignment tool. For Models: 250C, 260C, 2810, 2910, 3230, 340, 340A, 340B, 3430, 345C, 345D, 3910, 3930, 4110, 4130, 445, 445A, 445C, 445D, 450, 455, 4610, 4630, 4830, 5030, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A (Part No: 1112-6163) $249.90 [Enlarge Picture] CLUTCH KIT - Clutch kit for 9" double clutch. Contains remanufactured 9" pressure plate assembly, 12 springs, 6 levers, remanufactured 9" engine disc, 15-spline, 1" hub; remanufactured 9" PTO disc, 29-spline, 1-7 8" hub, new release and pivot bearings. For live PTO double clutch models (1955 to 1964). Tractors: 600, 700, 800, 900, Dexta, Super Dexta. (Part No: 311435K_) $469.90 [Enlarge Picture] CLUTCH KIT NEW - Clutch kit "NEW" (Dual clutch). Includes NEW pressure plate assembly 280mm-11" dual independent PTO with 6 lever clutch fitting 9 or 12 bolt flywheel, 280mm-11", 25mm hub, 10 spline rigid woven PTO disk, New transmission release bearing, PTO release bearing and pilot bearing. Tractors: 3010S, 4010S, 4030 Orchard, 4230, 4330V, 4430, 5010S, 5530, 5610S, 6530, 6610S, TT55, TT65, TT75. (Part No: 5171137KT) $758.60 [Enlarge Picture] CLUTCH KIT, 10 SPLINE DISC - Kit Includes 12 inch, 10 spline rigid disc, pressure plate, release bearing and alignment tool. FOR MODELS: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700 (Part No: E0NN7550DA) $197.90 [Enlarge Picture] CLUTCH KIT, 25 SPLINE DISC - Complete kit includes 12 inch, 25 spline rigid disc, cover plate, release bearing, pilot bearing, and alignment tool.``For Models: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700 (Part No: E0NN7563CA-KITA) $198.90 [Enlarge Picture] CLUTCH KIT, 25 SPLINE DISC - Complete Kit contains 12" 25 spline spring drive disc, 12" single pressure plate, pilot and release bearings, includes pilot tool. For Models: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Part No: E7NN7550DA-KIT) $209.90 [Enlarge Picture] CLUTCH, PRESSURE PLATE - Pressure Plate (7 1 4 inch) Diaphram Type. For model 1300. (Part No: S.72822) $46.90 [Enlarge Picture] Clutch Alignment Tool - 15 16" 10 spline, 1-3 8" 29 spline, .468" pilot. For Models: 1000, 1500, 1600, 1700, 1900, 1310, 1510, 1710, 1320, 1520, 1620, 1720, 1925, 1530, 1630. (Part No: S.70911) $31.50 Clutch Alignment Tool - 1-3 8" 10 spline, .67" pilot. For Models with single clutch: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 1112-5996) $8.49 [Enlarge Picture] Clutch Bearing - Clutch release bearing. I.D. 2.4997", O.D. 4.0700", W. 0.8700". For Models: 2000, 3000, 4000, 4110, 5000. (Part No: D8NN7580BB) $21.90 [Enlarge Picture] Clutch Bearing - Bearing, for PTO drive plate. I.D. 1.4370", O.D. 2.6772", W. 0.5906". For Models: 5000, 7000, 8000. (Part No: F0NNN779AA) $17.90 [Enlarge Picture] Clutch Cover Assembly - Pressure plate assembly, 12" single clutch. For Models: 5000, 5600, 5610, 5700, 6600, 6610, 6700. (Part No: E0NN7563CA) $139.90 [Enlarge Picture] Clutch Cover Assembly - 13", 4 lever, Halo ring and 1-7 8", 29 spline IPTO hub. Tractors: 2810, 2910 (5 83-2 90), 3230, 3430, 3630, 3910 (5 83-2 90), 4110, 4130, 4330, 4340, 4400, 4410, 4500 (1 65-75), 4600, 4610, 4630, 4830, 5030. Replaces E0NN7563BA, 82006027. (Part No: C5NN7563AC) $232.90 [Enlarge Picture] Clutch Disc - Clutch disc, 11", 15-spline, 1" hub. For 4100, 4110, 4200, 4410, (Part No: C7NN7550AA) $83.77 Clutch Disc - Clutch disc, 12", 25-spline, 1 -5 8" hub, woven facing. For 5000, 5600, 5700, 6600, 6700, (Part No: E3NN7550EA) $58.90 [Enlarge Picture] Clutch Disc - Clutch disc, 12", 10-spline, 1-3 4" hub. For 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, (Part No: E7NN7550DA) $77.90 [Enlarge Picture] Clutch Disc - Clutch disc, 13", 10-spline, 1-3 4" hub, with damper springs. For 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810S, (Part No: E7NN7550EA) $89.90 [Enlarge Picture] Clutch Disc - Clutch disc, 13" heavy-duty clutch, 25-spline, 1-5 8" hub. For 5000, 5100, 5200, 6600, 6700, 7000, 7100, 7200, (Part No: E8NN7550KA) $111.34 [Enlarge Picture] Clutch Disc - Dual clutch, 8-1 2", 15 16", 10 spline, rigid woven disc. For Models: 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, TC27D, 23-66. (Part No: SBA320400492) $128.80 [Enlarge Picture] Clutch Disc - 13", 10 spline, 1" hub, woven disc, dampened disc. Tractors: 2810, 2910 (5 83 -2 90), 3230 (3 90- ), 3430 (3 90- ), 3630 (3 90- ), 3910, 3930 (5 83-2 90), 4110, 4130, 4330, 4340, 4610 (5 83-2-90), 4630, 4830 (3 90- ), 5030 (7 90-). Replaces E5NN7550AA (Part No: E7NN7550BA) $159.90 [Enlarge Picture] Clutch Disc - 13", 25 spline, 1-5 8" hub, Rigid woven disc. Tractors: 5000, 5200, 5340 (1 65-9 69) Less dual power, 5700 (1 75-) Less dual power, 6600, 6700 (10 75-10 81) Less dual power, 7000, 7100, 7600, 7700 (10 71-9 75) Less dual power. Replaces D2NN7550A. (Part No: 3919288) $139.90 [Enlarge Picture] Clutch Disc - 13", 10 spline, 1-3 4" hub, Rigid woven disc. Tractors: 5000 (1 65-9 69) Dual power, 5110 (1 81-12 92) Dual power, 5200, 5340 (1 65-9 69) Dual power, 5640 (11 91-), 5700 (1 75-) Dual power, 6410 (1 81-12 92), 6600, 6700 (10 75-10 81) Dual power, 6610 (1 81-) Dual power, 6640 (11 91-), 6710 (1 81-) Dual power, 7000 (10 71-9 75) Dual power, 7100, 7200 (10 71-9 75) Dual power, 7600, 7700 (10 71-9 75) Dual power, 8010, 8210 (4 96-), TS90, TS100, TS110 (11 97-). (Part No: 82011594) $139.90 [Enlarge Picture] Clutch Disc - 13", 10 spline, 1-3 4" hub, 6 pad, dampened disc. Tractors: 5610 (1 81-), 5640 (11 91-), 6610 (1 81-) Dual power, 6640 (11 91), 7100, 7200 (10 71-9 75) Dual power, 7600, 7700 (10 71-9 75) Dual power, 7610, 7710 (1 81-) Dual power, 7740, 7840 (11 91-), 7810, 7910 (10 85-3 88), 8010, 8210 (4 96-), 8340 (11 91-), TS90, TS100, TS110 (11 97-). (Part No: E8NN7550PA) $172.90 [Enlarge Picture] Clutch Disc - 10" Clutch Disc NAA, Jubilee, 600, 700, 800, 900 (4 speed to serial # 14257) - 10 Spline x 1 3 8" Hub - This Is A Retrofit For 9" Clutch, Must Use 10" Pressure Plate. (Part No: NCA7550A) $64.90 [Enlarge Picture] Clutch Disc - For Models: Dexta, Super Dexta. 11" disc - 1" X 15 spline. (19528S) (Part No: F0NN7550CA) $91.55 [Enlarge Picture] Clutch Disc - For Models: Fordson Major, Power Major, Super Major. 11" Clutch disc, 1-3 8" x 10 spline. (72736S) (Part No: D8NN7550DA) $99.14 [Enlarge Picture] Clutch Disc 10 Inch - Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 313299) $7907 Clutch Disc, 10 inch - New, organic, spring loaded, 15 spline, 1 inch hub. For Models: 1801, 1821, 1841, (2000 4 cyl.), 2031, 2111, (2130, 2131 yr 1958 and up), (4000 1962-1964 4 cyl single clutch), 4031, 501, 541, (600 single clutch), 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 820, 821, 840, 841, 850, 851, (900 single clutch), 901, 941, 950, 951. (Part No: NDA7550B) $61.34 [Enlarge Picture] Clutch Disc, 10 inch - 15 spline, 1 inch hub. For Models: 601, 701, 801, 901, 2000, 4000 1958-1964 w 4 & 5 speed single clutch. (Part No: E8NN7550FA) $53.85 [Enlarge Picture] Clutch Disc, 10 inch, Single Stage, New - Kit includes pressure plate, woven clutch disc, & bearings. For Models: 1800, 1801, 1821. (Part No: FND63AK) $171.57 Clutch Disc, 11 Inch - 10-spline, 1" hub, button pad type facing. For Models: 2000, 3000, 4000, 4110. (Part No: C7NN7550AC) $69.90 [Enlarge Picture] Clutch Disc, 11 Inch - 15-spline, 1" hub, woven facing. For single clutch tractors: (2000 & 3000 1965 to 9-1969) Replaces C7NN7550C. Models with 7 & 8 speed transmissions & PTO. Also fits the following models (less PTO): (4100, 4110, 4200 1965 to 9-1969), (4100 10-1971 & up). (Part No: C7NN7550V) $78.90 [Enlarge Picture] Clutch Disc, 11 Inch - 10-spline, 1" hub, woven facing. For 2000, 2600, 2610, 3000, 3600, 3610, 3900, 4000, 4100, 4110, 4600. (Part No: D1NN7550A) $86.67 [Enlarge Picture] Clutch Disc, 11 Inch - Rigid, Organic, 1.00" splines, 15 spline. For Models: 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3100, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4110, 4140, 4500, 4600, 4610, 530A, Dexta. (Part No: 328024710) $73.92 [Enlarge Picture] Clutch Disc, 11 inch - Torsion dampened, organic, 1" spline dia., 10 spline. For Models: 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 333, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4200, 4400, 4410, 4600.(Refundable $20 core charge). (Part No: 328015716) $127.31 [Enlarge Picture] Clutch Disc, 11 inch - Remanufactured, 1" spline dia., 10 spline, organic, spring loaded. For Models: (2000, 2100, 2110 w Independant PTO), (2120, 2150 w 3 cyl. and Ind. PTO), (3610 from 10 1981 to 12 1984 w dual clutch), (4000 w 3 cyl. and Ind. PTO from 1965 to 9 1969 or 1965 to 9 1975 w dual clutch), (4100, 4200 from 1965 to 9 1969 w Ind. PTO). (Part No: E5NN7550BB-RO) $73.50 [Enlarge Picture] Clutch Disc, 13 Inch - Clutch disc, 13", 10-spline, 1" hub, no damper springs. For 2810, 2910, 335, 3550, 3910, 4110, 420, 4400, 4410, 4500, 4600, 4610, 515, 532, 535. (Part No: F0NN7550BA) $79.90 [Enlarge Picture] Clutch Disc, New - 9" Clutch Disc, Hub-1 3 8 inch, Splines-10, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. Also replaces NAA7550A. (Part No: 91A7550WHD) $37.93 [Enlarge Picture] Clutch Disk, 8.5in. - For 1310, 1320, 1500, 1510, 1520, 1530, 1630, 1700, 1710, 1715, 1725, 1900, TC25, TC25D, TC29, TC29D, TC30. REMANUFACTURED Clutch Disk is 8.5 Inch Diameter. 10 Spline.9375 inches. (Part No: SBA320400212-RO) $62.82 Clutch Kit - Kit contains 11" 10 spline rigid drive disc, 11" single pressure plate, pilot and release bearings, includes pilot tool. For Models: 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D (Part No: D0NN7563A-KIT) $239.33 [Enlarge Picture] Clutch Kit - Kit includes All new parts, Heavy duty single clutch, pressure plate 8-1 2", 10 spline, 24mm hub, woven disc, release bearing, and pilot bearing. For Models: 23-66, 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900. (Part No: SBA320450011K) $249.90 [Enlarge Picture] Clutch Kit - 11 inch Double Clutch with 15 spline RIGID drive disc. Complete with pressure plate, disc, pilot bearing, release bearing and alignment tool. For Models: (2000, 2100, 2110, 2310 3 cyl. dual clutch), 2120, 2150, 231, 234, 530A, 531, (230A, 233, 333 dual clutch), (2310, 2600, 2600N, 2610 1981-Dec 1984 dual clutch), (3000, 3100, 3400, 4000, 4110 1965-Sept 1975 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330 Jan 1965-Dec 1974), 3600 Oct 1975 and up dual clutch, 3610 Oct 1981-Dec 1984 dual clutch. (Part No: D8NN7502AA) $376.90 [Enlarge Picture] Clutch Kit - 10", 15 Spline. New Pressure Plate, New Clutch Disc, New Release Bearing and Pilot Bearing. For Models: 601, 701, 801, 901, 2000, 4000 (58 64, 4&5 Speed Tractors, Single Clutch). Fingers do have counter-weights. (Part No: S.72752) $154.37 Clutch Kit, 10 Inch, Single Clutch - For models with 4 or 5 speed transmission, tractors: 600, 700, 800, 900, 1841, 2000, 4000 (1953 to 1957). NEW Clutch kit for 10" single clutch. Kit contains new pressure plate, release bearing and pilot bearing. 10" Disc, 15 Spline, 1" Hub. Fingers do not have counter-weights. (Part No: NDA7563AK) $149.95 [Enlarge Picture] Clutch Kit, 8-1/2in. DUAL - New heavy duty DUAL clutch. Includes: Pressure plate assembly, (8-1 2in., 19 spline, 36mm hub, woven disc.), Heavy duty disc (8-1 2in., 10 spline, 24mm hub, woven disc), Release bearing, Pilot bearing. Fits compact tractors: 1320, 1520, 1630, 1715. (Part No: SBA320040693K) $1095.30 [Enlarge Picture] Clutch Kit, 8-1/2in. DUAL - New heavy duty DUAL clutch. Includes: Pressure plate assembly, (8-1 2in., 19 spline, 36mm hub, woven disc.), Heavy duty disc (8-1 2in., 10 spline, 24mm hub, woven disc), Release bearing, Pilot bearing. Fits compact tractors: 1310, 1510, 1710. (Part No: SBA320040341K) $965.62 [Enlarge Picture] Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. Kit contains 9 inch 10-spline spring drive disc, 9 inch single pressure plate, pilot and release bearings, includes pilot tool. (Part No: 8N7563K) $103.90 [Enlarge Picture] Clutch Kit, 9 inch, Single Stage, New - Kit includes Pressure Plate, Woven Clutch Disc, & Bearings. For Models: Dexta, Super Dexta, 1800, 1801. (Part No: F8N63SK) $159.60 Clutch Kit, 9in. DUAL - New heavy duty DUAL clutch. Includes: Pressure plate assembly, (9in., 19 spline, 36mm hub, woven disc.), Heavy duty disc (9in., 13 spline, 25mm hub, woven disc), Release bearing, Pilot bearing. Fits compact tractors: 1500, 1700, 1900. (Part No: SBA320040110K) $1051.16 [Enlarge Picture] Clutch Kit, 9in. DUAL - New heavy duty DUAL clutch. Includes: Pressure plate assembly, (9in., 16 spline, 30mm hub, woven disc.), Heavy duty disc (9in., 14 spline, 19mm hub, woven disc), Release bearing, Pilot bearing. Fits compact tractors: 1720. (Part No: SBA320040483K) $1051.16 [Enlarge Picture] Clutch Master Cylinder - For Models: 5640, 6640, 7740, 7840, 8240, 8340 (12 x 12 transmission). Replaces F0NN7A543AB. (Part No: 81867084) $211.95 [Enlarge Picture] Clutch Master Cylinder Repair Kit - For Models: 5640, 6640, 7740, 7840, 8240, (8340 w 12 x 12 trans), (TS90, TS100, TS110 1 1997 and up). Replaces F1NN7578AA. (Part No: 81873388) $48.58 Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1 2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $5.73 [Enlarge Picture] Clutch Pedal Bushing - 1 Inch inside diameter. For 2N, 9N 1939-1947. Clutch pedal bushing split 2 piece. Price per each, min order qty is 2. Order will be increased to next multiple of 2. (Part No: 9N7508) $8.16 [Enlarge Picture] Clutch Pedal Shaft Bushing - 7 8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $5.21 [Enlarge Picture] Clutch Plate - Clutch disc, 13", 10-spline, 1-3 4" hub, 9 pads. For Models: 8000, 8700, 9000, 9700. (Part No: D1NN7550C) $197.90 [Enlarge Picture] Clutch Plate - Pressure plate assembly, 11". For Models: 4100, 4110, 4140, 4200, 4400, 4500, 4610SU, 4610. (Part No: D8NN7563DB) $149.90 [Enlarge Picture] Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657) $47.90 [Enlarge Picture] Clutch Release Bearing Hub - For Models: 5000, 5600, 5700, 6600, 6700 all w single clutch. (Part No: C5NN7571H) $26.55 [Enlarge Picture] Clutch Shaft Bushing - 1.80" long, 1.231" O.C, 1.062" I.D. For Models: 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Part No: C5NN7A615A) $8.99 [Enlarge Picture] Cover Assembly - Pressure plate assembly, 11" single clutch. For Model: 4000. (Part No: C9NN7563E) $216.71 [Enlarge Picture] Cover Assembly - Pressure plate assembly, 11" single clutch. For Models: 2000, 233, 2600, 3000, 321, 3600, 5000. (Part No: D0NN7563A) $216.71 [Enlarge Picture] Dual Clutch Kit w/ 15 spline Spring disc - Includes NEW parts: D8NN7502AA Pressure Plate; 11" Dual 3 lever , E8NN7550BA SPRING type Trans Disc; 11", Hub DIA=1.0in (15 splines), Release & Pilot bearings, and Clutch alignment tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. (Part No: 1112-6061) $376.13 [Enlarge Picture] Dual Clutch Kit w/10 spline RIGID disc - Includes NEW parts: D8NN7502AA Pressure Plate: 11" Dual 3 lever , E8NN7550HA 10 spline RIGID type Trans Disc, Release & Pilot bearings, and Clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: Includes PTO Disc. (Part No: 1112-6089) $376.33 [Enlarge Picture] Dual Clutch Kit w/10 spline SPRING disc - Kit contains 11" 10 spline spring drive disc E8NN7550HA, 11" 29 spline double pressure plate D8NN7502AA, pilot and release bearings, includes pilot tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. (Part No: 1112-6075) $396.13 [Enlarge Picture] Dual Clutch Kit w/15 spline RIGID disc - Includes NEW parts: D8NN7502AA Pressure Plate: 11" Dual 3 lever , E8NN7550BA 15 spline RIGID type Trans disc, 29 Spline PTO Disc, Release & Pilot bearings, and Clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: PTO Disc included. (Part No: 1112-6039) $376.33 [Enlarge Picture] Dual Clutch Kit w/Trangular disc - Includes NEW parts: D8NN7502AA Pressure Plate: 11" Dual 3 lever , E8NN7550BA TRIANGULAR type Trans Disc, Release & Pilot bearings, and Clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: PTO Disc included. (Part No: 1112-6076) $396.13 [Enlarge Picture] Friction Disc - 5.85" O.D, 52 Teeth. For Models: 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000 (1962-1964), 4110, 501, 541, 601, 611, 620, 621, 630, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: PBB77519A) $15.98 [Enlarge Picture] Friction Facing - Slip clutch disc, 2 required (6-1\2 O.D. with 2 hole). For Models: 909, 910. (Part No: 202227) $12.30 Friction Plate - Clutch friction plate, 5-1\4 O.D., 45 internal splines. For Models: 2000, 3000, 4110. (Part No: C0NN7B164A) $27.92 [Enlarge Picture] Friction Plate - Clutch friction plate, 5-7\8 O.D., 52 internal splines. For 4000 (Part No: C0NN7B164B) $16.56 [Enlarge Picture] Friction Plate - Clutch friction plate, 5-1\4 O.D., 45 internal splines. For Model: 4000. (Part No: C5NNP743A) $19.34 [Enlarge Picture] Friction Plate - Clutch friction plate. For Models: (3000, 4000 from 1 1965 and up), 4100, 4600. (Part No: C7NNP743B) $11.97 Friction Plate, Select-O-Speed #2 or #3 - For Models: 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Part No: C0NN7B455A) $35.88 [Enlarge Picture] Pilot Bearing - For Models: 1800, 1801, 1821, 1841, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3610, 3630, 3910, 3930, 4031, 4100. 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Part No: C5NN7600A) $8.90 [Enlarge Picture] Pilot Bearing - For Models: 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Part No: C5NN7600A) $8.90 [Enlarge Picture] Pilot Bearing - I.D.. .475, O.D. 1.102, Thickness .313. For Shibaura compact Tractors: 1000, 1210, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 1925 HST, 2110, 2120, TC27D, TC30D, 23-66, 28-66. (Part No: SBA040116001) $9.90 [Enlarge Picture] Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $8.90 [Enlarge Picture] Pilot Bearing - For Fordson Major, Power Major, Super Major. (Part No: E1ADKN7600A) $7.48 [Enlarge Picture] Pressure Plate - Pressure plate assembly, 11". For 4000, 4100, 4140, 4200, 4600SU, 4600, (Part No: C5NN7563U) $179.90 [Enlarge Picture] Pressure Plate - Pressure plate assembly, 11" single clutch. For Models: 2000, 3000. (Part No: C9NN7563D) $189.90 [Enlarge Picture] Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, Jubilee, 600, 700, 800, 900 w single clutch. (Part No: 8N7563) $69.90 [Enlarge Picture] Pressure Plate - 11", 3 lever, open center. For single clutch Models: Dexta, Super Dexta, Major, Power Major. Replaces 957E7563B, E1ADKN7563A. (Part No: E1ADDN7563A) $162.11 [Enlarge Picture] Pressure Plate - 12" plate. For Models: 3000, 4000, 5000, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 7600, 7700. (Part No: C5NN7566A) $106.65 [Enlarge Picture] Pressure Plate - 11", 4 lever with 8 mounting holes and 2 dowels. Tractors: 2000, 2100, 2110 (65-9 69), 2300, 3000, 3055 (65-9 69), 3100, 3110, 3120, 3190 (65-9 69), 3300, 3310, 3330 (65-9 69), 4000, 4100 (65-9 69), 4140 (10 71-9 75). (Part No: C5NN7563V) $139.90 [Enlarge Picture] Pressure Plate - 13 inch diaphragm For models 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710. Also replaces 52001664, 82006009 and 82006025. (Part No: 82011590) $189.90 [Enlarge Picture] Pressure Plate - 13" Pressure Plate for Model: Super Major (1960-1964) (19523S) (Part No: E1ADDN7563B) $396.78 Pressure Plate Assembly, 13 - 13" single clutch. For Models: 5000, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D8NN7563AB) $139.90 [Enlarge Picture] Pressure Plate and Cover - 11" single clutch. For Models: (4000, 4100, 4110, 4200, 4410 all w trans. PTO or live PTO). (Part No: C5NN7563Z) $133.31 [Enlarge Picture] Pressure Plate, 10in, Re Manufactured - 10" Single. For Models: 1801 (1953-1957, 1958), 2000, 2130 (1953-1957), 2130 1958 >, 4000 (62-64), 600, 700, 900. (Part No: B8NN7563A-R) $74.30 [Enlarge Picture] Pressure Plate, 11in, Re Manufactured - 11" single, spline dia. 1.875", 29 splines, w PTO hub (flat fly wheel). For Models: 2000 3 CYL. INDEP. PTO, 2000 INDEP. PTO, 2100 3 CYL. INDEP. PTO, 2100 INDEP. PTO, 2110 3 CYL., INDEP. PTO, 2110 INDEP. PTO, 4000 65-9 69, 3 CYL. INDEP. PTO, 4100 10 71-10 80 INDEP. PTO, 4100 65-9 69 INDEP. PTO, 4140 UTILITY SPECIAL 1 65-12 74; 10 69-9 71, INDEP. PTO, 4200 65-9 69 INDEP. PTO, 4600 10 75-10 80 INDEP. PTO, 4600SU 10 75-10 80, INDEP. PTO. (Part No: C5NN7563U-RP) $217.78 [Enlarge Picture] Pressure Plate, 13 - 4 lever, long style, heavy duty, w new cast plate. For Models: 8000, 8100, 8200, 8210, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW5 all indep. PTO w or w o dual power. (Part No: D8NN7563BA-RHN) $190.00 [Enlarge Picture] Release Bearing - Clutch release bearing. For Models: 4000, 8630, 8730, 8830, TW15, TW20, TW25, TW30, TW35. (Part No: D8NN7580CA) $28.57 [Enlarge Picture] Release Bearing - Clutch release bearing assy. I.D. 2.500", O.D. 4.1250", W. 0.8700". (Part No: NDA7580B) $21.90 [Enlarge Picture] Release Bearing - Greasable Release Bearing is 4.152 inches OD, 2.5 ID, .87 wide for models 2000, 2100, 2110, 231, 3000, 3055, 3100, 333, 335, 340, 345D, 3500, 4000, 4100, 4130, 4140, 4630, 5640, 600, 6640, 6710, 7740, 7840, 800, 8000, 8200, 8200, 8400, 8530, 8600, 8700, 900, 9000, 9200, 9600, 9700, Super Dexta, TW10, TW15, TW5. (Part No: 500019940) $23.06 [Enlarge Picture] Release Bearing - Clutch release bearing. FITS 1310, 1320, 1510, 1520, 1530, 1630, 1710, 1715, 1720, 1900, 1920, 1920, 2110....ALL WITH DOUBLE CLUTCH. (Part No: SBA398560340) $34.90 Release Bearing - Sealed. For models: 1800, 2130, 2131, (2600, 2600N, 2610 1981-12 1984), (3000, 3100 1965-9 1975), (3120, 3150, 3190, 3300, 3310 1 1965-12 1974), (Dexta, Super Dexta 1 1958 to 12 1964), Major, Power Major. (Part No: 787580A8) $26.26 Release Bearing - I.D. 1.496", O.D. 2.642", Thickness .640". For Models: 1210, 1220, 1300. (Part No: SBA398560110) $38.92 [Enlarge Picture] Release Bearing - Release bearing (single clutch), I.D. 1.771", O.D. 2.900", Thickness .700". For Models: 1000, 1310, 1320, 1500, 1510, 1520, 1530, 1620, 1630, 1700, 1710, 1715, 1900, 2120, 23-66. (Part No: SBA398560120) $36.63 [Enlarge Picture] Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. (Part No: 78-7580A) $23.07 [Enlarge Picture] Release Bearing Hub - Dimension A = 1.75 in, B = 2.05 in, C = 2.80 in. Fits 601, 701, 801, 901, 2000, 4000 (1965 & newer). 5 speed transmission with SINGLE clutch (s n 14256 & greater). (Part No: 311259) $28.90 [Enlarge Picture] Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $20.42 [Enlarge Picture] Release Bearing Hub - Dimension A = 2.10 in, B = 2.48 in, C = 1.91 in. For Models 601, 701, 801, 901, 2000, 4000 (DOUBLE CLUTCH , serial no. 14256 and up, 1965 and newer). For tractors with 5-speed transmission and double clutch. Replaces OEM# 311260, 86539876 (Part No: S.60599) $34.96 [Enlarge Picture] Release Bearing, Sealed - For Models: (2000, 2100 all w independant PTO), (2000, 2110 all w trans. PTO or less PTO). Replaces C0NN7580A. (Part No: E1ADKN7580B) $20.51 [Enlarge Picture] Slip Clutch - Complete slip clutch assembly, 1-1 8" spline. For Model: 908. (Part No: 7502531) $183.52 Spring - Spring for clutch & brake lever assist. Tractors: 3550, 4000 (11 1972 & up), 5100, 7100 (1965 & up), 420, 515, 532, 535, 4600, 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981). Must be ordered in quanities of 2. Priced each. (Part No: C5NN2472H) $3.49 Torque Limiter Clutch Disc, Select-O-Speed - 8" dia., 10 spline, 1.125" spline dia. For Models: 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965 and up with Select-o-speed transmission. (Part No: D0NN7A539B) $173.40 Trans. Disc, 12 - Organic, rigid disc, 1.625" spline dia., 25 spline. Replaces E3NN7550EA. For Models: 5000, 5100, 5200, 5600, 5610, 5700, 6500, 6600, 6610, 6700, 6710, 7610, 7710, 7910, 8210. (Part No: F0NN7550HA) $58.31 [Enlarge Picture] Trans. Disc, 13 - Spring loaded, Organic, 1.750" spline dia., 10 spline. For Models: 4830, 4830N, 5000, 5100, 5110, 5200, 5550, 5600, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, TS100, TS80, TS90. (Part No: 82011593) $78.85 [Enlarge Picture]   Cooling System Alternator New With Pulley And Fan - NEW Alternator assembly, 12 volt, 37 amp. For skid loaders: L series with Motorola alternators. For L (Part No: 86520116) $156.81 FAN BLADE - (17 inch) 7 Blade, Metal. Center hole is 3.25in. Bolt holes are 2.5in apart (measured in a square pattern) AND 4in. apart (measured diagonally). Fits (5600, 6600, 6700, 7600, 7700, 8 76> less Air Cond), (7600, 7700 9 76-9 80 w Air Cond), (7710 7 81-10 88 less Air Cond) (Part No: E7NN8600DA) $37.77 [Enlarge Picture] Fan Belt - Narrow fan belt. For Major Diesels prior to 1965. (Part No: DKN8620C) $11.90 [Enlarge Picture] Fan Belt - Belt, drive for fan and water pump, 54 long. For Models: 2000, 3000, 4000, 5000. (Part No: D4NN10C318A) $15.50 [Enlarge Picture] Fan Belt - For Models: 2N, 9N, 8N EARLY with front mount distributor. Length is 44 1 8 inches. Alternator belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL) $7.10 [Enlarge Picture] Fan Belt - Fits: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Some of these tractors used more than one type of belt, Verify part number before ordering. (Part No: EAF8577A) $9.99 [Enlarge Picture] Fan Belt - Fits: 2000, 3000, 4000, 5000. Industrials: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Some of these tractors used more than one type of belt, Verify part number before ordering. (Part No: C9NN10C318B) $9.80 [Enlarge Picture] Fan Belt - Fits: Dexta, Super Dexta, Fordson Major, Power Major, Super Major. (Part No: E1ADKN8620C) $8.99 [Enlarge Picture] Fan Belt - Fits: 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 230A, 231, 334, 335, 420, 515, 530A, 531, 532, 535, 650, 750, 755, 755A, 755B. Some of these tractors used more than one type of belt, Verify part number before ordering. (Part No: D3NN10C318C) $12.99 [Enlarge Picture] Fan Belt - For Models: 1510, 1710 both built between 1983 and 1987. (Part No: SBA080109055) $5.05 Fan Belt - For Models: 1320, 1520, 1715, 1720, 1920, 3415 all built 1987 and later. (Part No: 86517954) $8.78 Fan Belt - Notched belt is 41 3 8 inches long. For models 8N late (with side mount distributor), NAA (1952-1954, Jubilee. This belt also works with # 8NL10300ALT Alternator conversion kit. (Part No: 8N8620) $5.26 [Enlarge Picture] Fan Belt - For Models: 9N, 2N, 8N prior to S N 263844 using generator and have front Mount distributor. Not for tractors with alternator conversion. This belt is 46-1 8" long. (Part No: 9N8620B3) $10.05 [Enlarge Picture] Fan Blade - 4 Blade - Fan assembly, 4 blade, 16" dia. For Models: 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3900, 3910, 4000, 4100, 4110, 420, 4400, 4500, 4600, 4610, 5100, 515, 531, 535, 5600, 6600. (Part No: C5NN8600A) $26.99 [Enlarge Picture] Fan Blade - 4 Blade - For 2000, 4000, 501, 600, 800, 900. Four Blade Fan Blade. 1.75 inch bolt circle, .625 inch center hole, 15.875 inch outside diameter. (Part No: D1JJ8600E) $39.79 [Enlarge Picture] Fan Blade - 4 Blade - For Models: 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $38.95 [Enlarge Picture] Fan Blade - 6 Blade - Fan assembly, 6 blade, 16 inch outside diameter, plastic with steel reinforced center hub, .625 inch pilot hole, 4 mounting holes in 2.5 inch circle. For Models: 2000, 2600, 3500, 3550, 4000, 4130, 4400, 4600, 4610, 4630, 4830, 5100, 515, 5200, 530A, 531, 532, 6600. (Part No: D9NN8600AA) $24.99 [Enlarge Picture] Fan Blade - 8 Blade - For 3 and 4 Cylinder 1965 and up: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7000, 7600. 8 Blade, Blue PLASTIC 5 8" pilot hole, 4 bolt with 2 1 2 inch center to center on opposite holes, 14 Inch Outside Diameter. (Part No: S.60579) $25.50 [Enlarge Picture] Fan Blade, 3 Blade - 16" dia. Fan Blade. Fits models 501, 600, 800, 900, 2000, 4000, 1955-1964, 4 cyl. gas. 3.120 inch bolt circle, .625" pilot hole.`` USED WITH WATER PUMP CDPN8501C. (Part No: NCA8600S) $28.90 [Enlarge Picture] Fan Blade, 6 Blade - For Models: 2000, 4000, 600, 800, 900. Six Blade Fan Blade with.5 inch pilot hole, 3.15 inch 4 hole mounting center, 15.5 inch outside diamter. (Part No: NCA8600B) $52.95 [Enlarge Picture] Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $59.99 [Enlarge Picture] Fan Blade, 6 Blade, Pusher - 15.50" dia., .500" pilot hole, 2.187" center to center on mounting holes. For Models: 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Part No: JE8600A) $68.56 [Enlarge Picture] Fan Blade, 6 Blade, Pusher - 15.50" dia., .500" pilot hole, 2.187" center to center on mounting holes. For Models: 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Part No: JE8600A) $68.56 [Enlarge Picture] Fan Shroud - For 9N, 2N, 8N. Metal Fan Shroud. (Part No: 2N8146) $59.92 [Enlarge Picture] Fan Shroud - For Models: NAA, Jubilee, 501, 541, 600, 700, 800, 900, 601, 611, 621, 701, 801, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. Fan Shroud, Metal. (Part No: NCA8146A) $62.50 [Enlarge Picture] Fan, 5 Blade - 13" dia., 15 16" pilot hole, 1-1 8" center to center on mounting holes. For Models: 1120, 1215, 1220, 1320, 1520, 1720, (1920 from 1987 to 1998). (Part No: SBA145306491) $17.24 Fan, 6 Blade - (16 inch) 6 blade, metal. Fits models 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4130, 4630, IND. 230A, 231, 233, 234, 333, 334, 335, 340, 340B, 3400, 345C, 345D, 3500, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 5500, 555A, 555B, 555C, 555D, 650, 6500, 655, 655A, 55C, 655D, 675. (Part No: D3NN8600AA) $39.03 Fan, 6 Blade - 13.250 dia., 1.250 pilot hole, 1.500 bolt holes center to center. For Models: 1210, 1310. (Part No: SBA145306320) $23.59 [Enlarge Picture] Fan, 6 Blade - 14-1 4" dia., 1-1 8" pilot hole, 1-1 2" center to center on mounting holes. For Models: 1710, 2120. (Part No: SBA145306110) $21.52 Fan, 7 Blade - 13-1 2" dia., 15 16" pilot hole, 1-1 8" center to center on mounting holes. For Models: 1620, (1720 w tropical cooling). (Part No: SBA145306520) $50.98 Gasket, Water Pump Mounting - Gasket, Water pump rear to cylinder block. Tractors: all 4-cyl, 1953-1964.NAA, JUBILEE, 600, 700, 800, 900. (Part No: EAF8513A) $.75 [Enlarge Picture] Gasket, pump cover plate - FOR: Tractors: all 4-cyl, 1953-1964.``Price is for each (Part No: EAF8507B) $1.49 [Enlarge Picture] Gasket, pump cover plate - Tractors: 9N, 2N, 8N (Part No: 9n8507) $1.49 [Enlarge Picture] Gasket, thermostat housing to block - Tractors: all 4-cyl, 1953-1964, gas and diesel. Sold and Priced as Each. (Part No: EAF8255A) $.99 [Enlarge Picture] Housing - Housing, water outlet connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700 (Part No: C7NN8594B) $11.86 [Enlarge Picture] Magnetic Block Heater - 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3 4 inches x 3-3 4 inches, delivers 300-400 degrees surface temperature. KATS Handi-Heat model with 6 foot cable and instructions. (Part No: MBH1153) $47.88 [Enlarge Picture] Pulley, Water Pump - For Models: (8000, 8600 both 1968 thru 7 31 1976), (A64 prior to 8 31 1976). (Part No: C7NN8A528A) $42.71 [Enlarge Picture] Radiator - Radiator assembly with oil cooler. For Models: 7100, 7200. For Radiator Cap order PN# E2NN8100BA (Part No: D3NN8005B) $367.72 [Enlarge Picture] Radiator - w Cooler, Less Air Cond. Fits models 6610, 7410, 7610. (Part No: E0NN8005GC15M) $357.10 [Enlarge Picture] Radiator - For the following tractors without oil cooler: 4100 or 4600 (Diesels w cab & AC 1977>), 4500, 5000 (1965 to 1975); 5600, 6600 (1975 to 1981); 535 (1975 to 1978). Industrials: 340 (< 9 1985), 445 (w o torque converter 10 78 - 9 86). Replaces C7NN8005E, C5NN8005N. (Part No: 86531508) $281.32 [Enlarge Picture] Radiator - For Models: 6810 with AC, 7610 with AC & Viscous fan, 7810 with oil cooler holes on rear side. This Radiator uses Cap # R1855 (Part No: E7NN8005BA) $350.93 [Enlarge Picture] Radiator - For Model: 1710. Radiator. Core measures 14.812 inches high, 16.812 inches wide. Filler cap is top center. Top hose connection is left, bottom is left. (Part No: SBA310100440) $365.80 [Enlarge Picture] Radiator - Fits Dexta (1957 to April 1962). (Part No: 957E8005) $322.65 [Enlarge Picture] Radiator - Fits: Major, Power Major, Super Major. Has attaching lugs on outer edge. (Part No: E1ADDN8005C) $380.69 [Enlarge Picture] Radiator - For Models: 3230, 3430, 3930, 4130, 4630. (Part No: E9NN8005AB15M) $303.07 [Enlarge Picture] Radiator - With copper core. Core size 18" wide, 17-3 4" high, 4 rows of tubes, 8 fins per inch. Replaces D8NN8005KA, D5NN8005A. For Models: 5600, 6600, 7600. All w diesel engines. (Part No: D8NN8005KB) $556.51 [Enlarge Picture] Radiator - High Quality Radiator for 9N, 2N, 8N. Copper Core, 3 rows of tubes, weight 16 lbs. Draincock included. 1 year warranty. (less cap). The Original or Replacement Fan Shroud will not fit this radiator without some modification to the fan shroud. This modification consists of trimming the inside of the bottom of the fan shroud. (Part No: 8N8005-C) $159.86 [Enlarge Picture] Radiator - Core is 16.812" wide, 14.812" high. For Model: 1510. (Part No: SBA310100291) $235.23 [Enlarge Picture] Radiator - Core size 19.937" high, 20.00" wide, 3 rows of tubes, 10 fins per inch. For Models: (6710 w air conditioning), (7700, 7710 w or w o air conditioning). Replaces E1NN8005EA15M, D6NN8005F, D5NN8005T, D5NN8005B. (Part No: E1NN8005EB15M) $624.49 [Enlarge Picture] Radiator - Restoration Quality. This radiator is made like the original with a curved top tank (less cap), 4 rows of tubes. Copper core. For 9N, 2N, 8N. Draincock included. Meets or exceeds original manufacturers specification for cooling. 1 year warranty. (Part No: 8N8005-R) $277.97 [Enlarge Picture] Radiator - 12-7 8" high x 16-3 8" wide core, 2 rows of tubes, serpentine fin construction. Filler cap is top center. For Models: 1500, 1600, 1700, 1900. MAY SHIP TRUCK FREIGHT - CALL FOR SHIPPING QUOTE. (Part No: SBA310100031) $468.42 [Enlarge Picture] Radiator - Core 16.625" wide x 15.750" high, 3 rows of tubes. For Models: 1720, 1920. (Part No: SBA310100600) $289.65 [Enlarge Picture] Radiator - Core size 12.25" wide, 10.625" high, 2 rows of tubes 10 fins per inch. For Model: 1100. (Part No: 86561696) $265.49 [Enlarge Picture] Radiator - Core size is 15.50" wide, 15.75" high, 3 rows of tubes. For Models: 1530, 1630, 1725, 1925, TC25, TC25D, TC29, TC29D, TC29DA, TC33, TC33D, TC33DA. (Part No: 86402723) $425.15 [Enlarge Picture] Radiator - Radiator assembly. 3 rows of tubes, cast inlets & outlets with no cap. Tractors: NAA, Jubilee, 500, 501, 600, 700, 800, 900, 2000, 4000 thru 1964, except HD ind. & fork lift. Also 172", 192" power units. Replaces NCA8005B, C and NDA8005B.``Core Height: 17"``Core Width: 15-1 4" (Part No: C5NN8005ABECON) $196.63 [Enlarge Picture] Radiator - For Super Dexta. (Part No: 959E8005) $322.65 [Enlarge Picture] Radiator - For models 256V, 276II, 276V, (9030E, 9030V ALL 7 1990 thru 9 1997)Core Size: 26.00" Wide, 30.375" High. ``Repalces 9706675, 9700356, V78976, 89706675. (Part No: 86018393) $917.92 [Enlarge Picture] Radiator - For 5700, 6700 all w AC 8 1976 & up. Radiator. Core dimensions: 20.0" wide, 19.875" high, 3 rows of tubes, 7 fins per inch. (Part No: D6NN8005D) $415.34 [Enlarge Picture] Radiator - For 7910, 8210 all 1982 and up. Radiator. Core dimensions: 20.0" wide, 23.5625" high, 5 rows of tubes, 8 fins per inch. (Part No: E1NN8005BD15M) $810.22 [Enlarge Picture] Radiator - Radiator assembly with oil cooler on engine side for: (345C, 445C 12-88\12-9, (4500, 5100, 5200 all 1965 and up), 535 W TORQUE CONV., 545 W TORQUE CONV. 7 11-88, 5600 1975, 6600 1975, 6600C. (Part No: D8NN8005SB) $371.68 [Enlarge Picture] Radiator - Heavy Duty. 4 Rows of tubes. Our Very High Quality radiator for 9N, 8N, and 2N tractors (Wt 22 lbs). Comes with draincock and for a limited time *FREE Winged Radiator Cap (p n 2N8100A-black). Copper core. Heavy duty for ultimate cooling in hot weather: Weighs 6 lbs more than our 8N8005-C radiator. 1 year warranty. THE 9N, 2N, 8N FAN SHROUD WILL NOT FIT on this radiator due to the heavy duty (large) hose connection. (Part No: 8N8005) $198.18 [Enlarge Picture] Radiator - Core size (the finned part) is 18" wide 16" high 3 rows of tubes 7 fins per inch. Also replaces EONN8005MA15M, EONN8005KA15M, EONN8005LA15M, EONN8005MB15M, EONN8005MD15M, C7NN8005N. For 3-cylinder engines (1965 & newer) on: 2000, 2100, 2120, 2300, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600, 4610. (Part No: C7NN8005H) $228.83 [Enlarge Picture] Radiator - For Models: 6810, 7610, 7810 with AC. Radiator core is 18 inches wide, 17.75 inches wide. Inlet is 1.5 inch diameter, outlet is 1.75 inch diameter. (Part No: R2759) $392.10 [Enlarge Picture] Radiator - For 8530, TW5 (1983 & Later), TW10, TW20 without Air Conditioning (Part No: R2760) $590.67 Radiator - For Models: 8630, TW15 (1983 & Later), TW20 with Air Conditioning. (Part No: R2761) $647.89 [Enlarge Picture] Radiator - For Models: 8730, TW25 (1983 & Later). (Part No: R2762) $684.27 [Enlarge Picture] Radiator - For Models: 8830 (1983 & Later), TW30, TW35 (1983 & Later). (Part No: R2763) $647.30 [Enlarge Picture] Radiator Assembly - For the following tractors without oil cooler: 4610 with 4-cylinder diesel (1984 to 1988). Replaces E4NN8005AB15M. For Radiator Cap order PN# E2NN8100BA (Part No: E4NN8005AA) $233.21 [Enlarge Picture] Radiator Assembly - For the following tractors without oil cooler, with air conditioning: 6810, 7610 (1981 to 1991). Replaces E7NN8005BA. For radiator Cap order PN# E2NN8100BA (Part No: E7NN8005BB15M) $329.90 [Enlarge Picture] Radiator Cap - For Models: Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: E62A8100A) $10.15 [Enlarge Picture] Radiator Cap - Plain, conventional type 4 psi pressure cap, less ornament. For tractors 9N, 2N, 8N. (Part No: 2N8100A-LW) $7.36 [Enlarge Picture] Radiator Cap - Cap, radiator, 4 psi. For tractors NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4cyl gas & diesel (1953 to 1964 except Majors. (Part No: 1T8100A2) $8.06 [Enlarge Picture] Radiator Cap - 13 PSI RADIATOR CAP (FOR 2000, 3000, 4000, 5000, 70001965 TO 1975), (2600, 3600, 4100 4600, 5600, 5700, 6600, 6700, 7600, 7700 1975 TO 1981), (2610, 3610, 4110, 4610, 5610 6610, 7610, 7710 1981 and up). REPLACES D2AE8100A1A. (Part No: E2NN8100BA) $6.42 [Enlarge Picture] Radiator Cap, Black - For 9N, 2N, 8N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A) $7.58 [Enlarge Picture] Radiator Cap, Chrome - For Models: 9N, 2N, 8N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615) $10.49 [Enlarge Picture] Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A) $3.56 [Enlarge Picture] Radiator Hood Pad - For Models: 9N, 2N, 8N. (Part No: 2N8032) $2.14 [Enlarge Picture] Radiator Hose - 1.50" I.D. For Models:1520, 2020, 2030, 300B, 301A, 302, 302A, 401B, 401C, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B. All with gas engines. (Part No: T22496) $8.26 [Enlarge Picture] Radiator Hose Kit - Kit contains upper, lower, filler, inlet-pump-block, bypass-pump-thermostat housing-cut to length hoses. For Model: Dexta diesel only. (Part No: S.66632) $27.16 [Enlarge Picture] Radiator Hose Kit - Kit contains upper, lower, filler, inlet-pump to block, bypass-pump to thermostat housing- cut to length hoses. For Model: Super Dexta diesel only. (Part No: S.66633) $29.91 [Enlarge Picture] Radiator Hose Kit - Kit contains upper, lower and filler hoses. For Models: Major, Power Major, Super Major diesel only. (Part No: S.66641) $25.56 [Enlarge Picture] Radiator Hose Lower - Hose, radiator lower less AC. For 5700, 6700, 6710, 7710, (Part No: D6NN8286B) $24.20 [Enlarge Picture] Radiator Hose Lower - Hose, radiator lower. For Models: 750, 755A, 755B, 755. (Part No: D8NN8286AA) $24.59 [Enlarge Picture] Radiator Hose Lower - Hose, radiator to cooler lower. For Models: 8200, 8400, 8600. (Part No: C7NN8286A) $15.10 [Enlarge Picture] Radiator Hose Lower - Hose, radiator lower. For 5600, 5610, 6600, 6610, 7600, 7610 (Part No: D5NN8286F) $15.14 [Enlarge Picture] Radiator Hose Lower - Hose, radiator lower. For Models: 5640, 6640, 7740, 8240, 8340. (Part No: F0NN8286AB) $13.00 [Enlarge Picture] Radiator Hose Set - Used with 4 cylinder 134-172 GAS engine. Includes Upper and Lower hose. 312588 Lower & NAA8260B Upper for: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, ``(2000, 4000 MANUAL steering only). (Part No: 134-172HOSESET) $10.20 [Enlarge Picture] Radiator Hose Set - 8N S N 263844 and above. Lower Radiator Hose #8N8286 and Upper Radiator Hose #2N8260. (Part No: 8NL-HOSESET) $10.00 [Enlarge Picture] Radiator Hose Set - 9N, 2N, 8N S N 263842 and below. Upper Radiator Hose #2N8260 and Lower #312588. (Part No: EARLY-HOSESET) $9.25 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper with oil cooler & AC. For Models: 8200, 8400, 8600. (Part No: D2NN8260B) $20.31 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper. For TW10, TW20, TW30, (Part No: D8NN8260BB) $19.78 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper with AC. For Models: 6710, 7700, 7710. (Part No: D4NN8260C) $16.90 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper. For Models: 5700, 6700, 6710, 7700, 7710. (Part No: D5NN8260C) $18.94 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper. For 8530, 8630, 8730, 8830, TW15, TW25, TW35, TW5 (Part No: E3NN8333AA) $15.12 [Enlarge Picture] Radiator Hose Upper - Hose, radiator upper with spigot. For Models: 3230, 3430, 3930, 4130, 4630. (Part No: E9NN8260AA) $23.12 [Enlarge Picture] Radiator Hose, Bottom - ID = 1.725". Fits GAS & DIESEL: 2000 (3 CYL), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420. FITS GAS ONLY: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Part No: C5NN8286B) $7.98 [Enlarge Picture] Radiator Hose, Bottom - For Models: Fordson Major, Power Major, Super Major. (Part No: E1ADDN8286) $16.60 [Enlarge Picture] Radiator Hose, Lower - For Models: 8670, 8770, 8970. (Part No: 9821599) $13.13 [Enlarge Picture] Radiator Hose, Lower - Hose, water pump to radiator lower. Hose is 1 1 2 inch inside diameter.``For Models: 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, Early 8N, 900, 901, 9N, NAA. (Part No: 312588) $6.24 [Enlarge Picture] Radiator Hose, Lower - Hose, radiator to outlet lower. For Model: Late 8N. (Part No: 8N8286) $6.17 [Enlarge Picture] Radiator Hose, Lower - Hose, radiator lower. For Models: 2600, 3600, 4100, 4600, 5000, 5600, 6600, 7600. (Part No: C5NN8286C) $8.10 [Enlarge Picture] Radiator Hose, Lower - With a 1.25 inch I.D. for 1700, 1900, both Jan 1979 to Sep 1979. Lower Radiator Hose (Part No: SBA310160150) $14.91 [Enlarge Picture] Radiator Hose, Lower - 1.25" I.D. For Models: 1700, 1900 both after Oct 1979. (Part No: SBA310160350) $16.24 [Enlarge Picture] Radiator Hose, Lower - For Models: Dexta, Super Dexta. (Part No: 957E8286) $18.53 Radiator Hose, Lower - A= 1.312". For Models: 1510, 1710. (Part No: SBA310160441) $12.29 [Enlarge Picture] Radiator Hose, Lower - A= 1.312" ID. For Models: TC25, TC25D, TC29, TC29D, 1530, 1630, 1725. (Part No: 86519855) $9.37 [Enlarge Picture] Radiator Hose, Lower - A= 1.250 inch. For Model: 1500. (Part No: SBA310160310) $16.64 [Enlarge Picture] Radiator Hose, Lower - 1.312" ID. For Model: 1720. (Part No: SBA310161031) $8.67 [Enlarge Picture] Radiator Hose, Lower - A= 1.00" ID. For Models: 1120, 1210, 1215, 1220, 1310. (Part No: SBA310160740) $12.86 [Enlarge Picture] Radiator Hose, Lower - With Clamps - For Models: TW10, TW20, TW30. (Part No: D8NN8B274AB) $11.25 [Enlarge Picture] Radiator Hose, Upper - For Models: 8670, 8770, 8970. (Part No: 9821598) $15.13 [Enlarge Picture] Radiator Hose, Upper - For Models: 750, 7500, 755, 755A, 755B. (Part No: D1NN8260B) $19.65 [Enlarge Picture] Radiator Hose, Upper - For Model: 7710. (Part No: E6NN8260AA) $22.63 [Enlarge Picture] Radiator Hose, Upper - Hose, radiator upper. For Models: 7710. (Part No: E6NN8260BA) $15.64 [Enlarge Picture] Radiator Hose, Upper - For Models: 4830, 5030. (Part No: F0NN8260BB) $15.96 [Enlarge Picture] Radiator Hose, Upper - Hose, ID = 1.5 inch, fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700 (Part No: C5NN8260D) $10.08 [Enlarge Picture] Radiator Hose, Upper - Hose, radiator upper. For Models: 550, 555, 555A. (Part No: D4NN8260A) $9.40 [Enlarge Picture] Radiator Hose, Upper - Hose, radiator upper. For 5640, 6640, 7740 (Part No: F0NN8260CA) $8.17 [Enlarge Picture] Radiator Hose, Upper - Hose, radiator upper. For 7840, 8240, 8340 (Part No: F0NN8260DA) $10.88 [Enlarge Picture] Radiator Hose, Upper - For 1700 all, 1900 Jan 1979 to Sep 1979. Upper Radiator Hose. (Part No: SBA310160170) $13.80 [Enlarge Picture] Radiator Hose, Upper - Hose ID = 1.5 inch. FITS: 2000 (3 CYL. DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, , 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D5NN8260D) $6.42 [Enlarge Picture] Radiator Hose, Upper - Hose for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, Series. Can replace 310048. (Part No: NAA8260B) $5.10 [Enlarge Picture] Radiator Hose, Upper - For Model: Dexta. (Part No: 957E8260A) $18.43 Radiator Hose, Upper - A= 1.312". For Model: 1710. (Part No: SBA310160450) $13.66 [Enlarge Picture] Radiator Hose, Upper - A= 1.312" ID. For Models: TC25, TC29, TC33, 1530, 1630, 1725, 1925. (Part No: 86519847) $8.82 [Enlarge Picture] Radiator Hose, Upper - A= 1.25 inch For Model: 1500. (Part No: SBA310160380) $14.43 [Enlarge Picture] Radiator Hose, Upper - 1.312" ID. For Models: TC30, 1320, 1520, 1620, 1715, 1720. (Part No: SBA310160932) $10.57 [Enlarge Picture] Radiator Hose, Upper - Hose, cylinder head to radiator upper. For tractors 9N, 2N & 8N (Part No: 2N8260) $5.00 [Enlarge Picture] Radiator Hose, Upper - A= 1.00" ID. For Models: 1120, 1210, 1215, 1220, 1310. (Part No: SBA310160730) $11.52 [Enlarge Picture] Radiator Mounting Pads - Price is for a package of 2 pieces. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. (Part No: 180705M1) $5.90 [Enlarge Picture] Radiator Shroud - Fits 16" fan. For Models: (5000 except row crop), 5900, (5600, 6600 up to 9 1980), 340, 340A, (345C up to 1 1991), (445, 545 w loader up to 9 1985), (445 10 1985 and up), (445C up to 1 1991), 535, 550, 555A, 650, 4500, 5550, 6500. (Part No: E5NN8146EA) $28.12 Radiator with Oil Cooler - For the following tractors with oil cooler, 3 cyl gas 158 CID or 158 CID Diesel: 2000, 3000, 4100, 4400 (1965 to 1975); 420, 532 with torque converter (1975 to 1981). Core is 18 inches tall and 16 inches wide. Oil cooler fittings on front side. Oil cooler can be plugged and not used if desired. For Radiator Cap order PN# E2NN8100BA (Part No: D8NN8005PA) $265.30 [Enlarge Picture] Radiator with Oil Cooler - REPLACES 83925458. Core Size (the finned part)is: 18.000" Wide, 17.750" High, 4 Rows of Tubes with 8 Fins Per Inch. Fits Industrials: 455 (7 87-11 88), 550 (8 81>), 555 (8 81>), 555A (8 81>), 555B (8 81>), 655 (8 81>), 655A (8 81>). (Part No: E0NN8005FA15L) $477.35 [Enlarge Picture] Radiator with Oil Cooler-Rear Fittings - Oil Cooler fittings are on the back-side of radiator. Replaces 83925458. ``Core Size (the finned part) is: 18.000" Wide, 17.750" High, 4 Rows of Tubes, 8 Fins Per Inch. Fits industrials: 455 (7 87-11 88), 550 (8 81>), 555 (8 81>), 555A (8 81>), 555B (8 81>), 655 (8 81>), 655A (8 81>). (Part No: D8NN8005BB) $423.54 [Enlarge Picture] Temperature Sender - Temperature sender, water. For Models: 2600, 3600, 4600, 5600, 5700, 6600, 7600. (Part No: D5NN10884A) $11.94 [Enlarge Picture] Temperature Sender, Water - Fits 2000, 2600, 3000, 4000, 5000, 7000, (1965-1975). (Part No: C4AH10884A) $8.84 [Enlarge Picture] Thermostat - Thermostat, 168°, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, DEXTA, SUPER DEXTA (Part No: D8NN8575AAWG) $10.96 [Enlarge Picture] Thermostat - Thermostat, 188°, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700 (Part No: D8NN8575BAWG) $10.96 [Enlarge Picture] Thermostat - 172 degree, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, MAJOR, SUPER MAJOR. (Part No: D8NN8575CAWG) $10.96 [Enlarge Picture] Thermostat - Thermostat, 203°, with gasket. For Models: 4830, 5640, 6640, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8670, 8730, 8770, 8830, 8870, 8970, G170, G190, G210, G240, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: D8NN8575FBWG) $19.58 [Enlarge Picture] Thermostat - 160 degree lo-temp, with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG) $10.54 [Enlarge Picture] Thermostat - 160 degree lo-temp. For tractors 9N, 2N, 8N. Fits in upper radiator hose, 2.250" long. (Part No: B2NN8575A) $30.40 [Enlarge Picture] Thermostat Housing - For Models: NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Gasket available as part #EAF18255A, request in comments section of order form. (Part No: 310031) $41.81 [Enlarge Picture] WATER PUMP REPAIR KIT - Water pump repair kit. Kit includes: impeller, shaft seal, bearing assembly, bolts, pulley. For tractors TM120, TM130, TM155, TM175, TM190. (Part No: 87802496) $225.05 WATER PUMP REPAIR KIT - Water pump repair pump. Kit includes: impeller, shaft seal, bearing assembly, bolts, pulley. Tractors: TM115, TM125, TM135, TM150, TM165. (Part No: 87801641) $189.90 Water Pump - Water pump with pulley, less rear housing. For Models: 9000. (Part No: E1NN8A513G) $77.83 Water Pump - Water pump with double groove threaded pulley, less rear housing. For 5110, 5610, 5910, 6410, 6810, 7610, 7710, (Part No: FAPN8A513AA) $99.90 [Enlarge Picture] Water Pump - Water pump with double groove pulley, less rear housing. For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5110, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: FAPN8A513DD) $92.12 [Enlarge Picture] Water Pump - Water pump with single groove threaded pulley, less rear housing. For 5110, 5610, 5910, 6410, 6810, 7610, 7710, (Part No: FAPN8A513HH) $101.73 [Enlarge Picture] Water Pump - For Models: 1500 AFTER 10 1979, (1700 and 1900 AFTER 1 1979. Pump does not come with gasket. (Part No: SBA145016071) $99.97 [Enlarge Picture] Water Pump - For a 1710 1983 and up. Water pump with pulley. O-ring NOT included (available from dealer only). (Part No: SBA145016510) $91.54 [Enlarge Picture] Water Pump - For Model: 1510. Water Pump also replaces SBA145016440. (Part No: SBA145016500) $165.59 [Enlarge Picture] Water Pump - For Models: (1120, 1215, 1220 from 1987 and up), (1210, 1310 from 1983 and up). (Part No: SBA145017300) $88.89 [Enlarge Picture] Water Pump - For Models: 5640, 6640, 7740, 7840, 8240, 8340. Replaces 87801112, F0NN8501CC. (Part No: 87800712) $189.42 [Enlarge Picture] Water Pump - For Models: 5640, 6640, 7740, LS190, LX985. Replaces F0NN8501DC, F0NN8501DB. (Part No: 87800714) $179.90 [Enlarge Picture] Water Pump - Fits Ford New Holland models: 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150, TM165 (Part No: 82847714) $154.90 Water Pump - For Models: 1320, 1520, 1620, 1715. (Part No: SBA145016780) $79.30 [Enlarge Picture] Water Pump - FORD For Models: 3010S, 3830, 4230, 4330V, 4430, 4835, 5530, 5635, 6530, 6635, 7635, LB75, LB75CP, LM430, LM640, TK76, TK85, TK85M, TL100, TL70, TL80, TL90, TN55, TN55D, TN55S, TN60VA, TN65, TN65D, TN65F, TN65S, TN65V, TN70, TN70D, TN70F, TN70S, TN75, TN75D, TN75F, TN75S, TN75V, TN80F, TN90F, TN95F, TT55, TT75 (Part No: 99454833) $105.90 Water Pump - FORD For Models: 3010S, 3830, 4230, 4330V, 4430, 4835, 5530, 5635, 6530, 6635, 7635, LB75, LB75CP, LM430, LM640, TK76, TK85, TK85M, TL100, TL70, TL80, TL90, TN55, TN55D, TN55S, TN60VA, TN65, TN65D, TN65F, TN65S, TN65V, TN70, TN70D, TN70F, TN70S, TN75, TN75D, TN75F, TN75S, TN75V, TN80F, TN90F, TN95F, TT55, TT75 (Part No: 99454833) $105.90 [Enlarge Picture] Water Pump - Ford: Water Pump for models TB90, TB10, TB110. (Part No: 87803008) $159.90 [Enlarge Picture] Water Pump - For Dexta, Super Dexta. w pulley & gasket. (Part No: 957E8501B) $109.44 [Enlarge Picture] Water Pump - For Models: 345C, (4500 diesel), (550, 555, 555A, 555B, 3930, 4000, 4130, 4600, 4610H all w BSD333 engine), (2000, 2600, w BSD326 engine), (3000, 3600, 3900 w BSD329 engine), 3230, 3430, 3910H w BSD332). Water Pump with single pulley, back housing & gasket. Replaces 87800115, C5NE8501A, C5NN8501A, D3NN8501A, D5NN8501E, D8NN8501CA, D8NN8501UA, D8NN8501UB. (Part No: D8NN8501UC) $117.88 [Enlarge Picture] Water Pump - For Models: 9N, 2N, 8N. Comes with 5 8 Pulley, Rear Cover Plate and Gasket. (Part No: CDPN8501A) $43.95 [Enlarge Picture] Water Pump - For NAA, Jubilee. Comes with Rear Cover Plate and Gasket. (Part No: CDPN8501B) $43.95 [Enlarge Picture] Water Pump - With Pulley For Models: 600, 700, 800, 900, 2000, 4000 - Gas & Diesel Engine. Comes with Rear Cover Plate and Gasket. For Models with Press On Pulley.`` USES 3 BLADE FAN PART # NCA8600S. Uses 4 1 4 inch mounting bolts on a 3 1 4 in circle. (Part No: CDPN8501C) $63.95 [Enlarge Picture] Water Pump - With Hub, Uses Bolt On Pulley. For Models: 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172" Industrial Gas & Diesel Engine (Part No: DCPN8501A) $59.90 [Enlarge Picture] Water Pump - With Hub For Major, Power Major, Super Major - 220 CID Engine Except With Power Steering (Part No: DKN8501AB) $56.56 [Enlarge Picture] Water Pump - REPLACED BY FAPN8A513GG``With Single Groove Pulley, Less Back Housing. Replaces FAPN8A513GG. For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5710, 5610, 6610, 6710, 7610, 7710. Also replaces FAPN8A513GG. (S.65018) (Part No: EAPN8A513F) $49.90 [Enlarge Picture] Water Pump - New - With Single Groove Threaded Pulley Less Backplate For 5110, 5610, 5910, 6410, 6810, 7610, 7710 (11 1988-10 1991) with 4 Cylinder Diesel Engine. OEM# (Part No: WP1837) $81.87 Water Pump - New - With Double Groove Threaded Pulley Less Backplate For 5110, 5610, 5910, 6410, 6810, 7610, 7710 (11 1988-10 1991) with 4 Cylinder Diesel Engine (Part No: WP1800) $92.03 Water Pump - New - With Single Groove Pulley Less Backplate For 8700, 9700 (8 1976-1978), 7910, 8210 (1982-10 1991), 8530, 8730, 8830 (From 3 1990), TW10, TW20, TW30 (1979-1982), TW5, TW15, TW25, TW35 (1983-2 1990). OEM# EGPN8A513BA, FAPN8A513LL (Part No: WP1832) $86.27 [Enlarge Picture] Water Pump Hose to Cyl. Block - For Models: Dexta, Super Dexta. (Part No: 81716946) $9.34 Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B) $30.51 [Enlarge Picture] Water Pump Kit - Repair kit. For Models: DEXTA, SUPER DEXTA. (Part No: E158Z9) $35.68 [Enlarge Picture] Water Pump Kit - Repair kit. For Water Pump CDPN8501C used on 4 cylinder gas engines on models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Part No: CPN8591B) $30.51 [Enlarge Picture] Water Pump Mounting Gasket, - Gasket, pump rear to cyl. block. Tractors: 9N, 2N, 8N (Part No: 9N8513) $1.00 [Enlarge Picture] Water Pump Pulley - Single groove. For Models: 1910, 2110, 2120. (Part No: SBA145336570) $47.65 Water Pump Pulley - For Models: 2N, 9N. (Part No: 9N8606) $22.65 [Enlarge Picture] Water Pump Pulley - Single groove. For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3910H, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5110, 550, 555, 555A, 555B, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7700, 7710. (Part No: C5NE8509A) $48.91 [Enlarge Picture] Water Pump Pulley, Single Groove - For Models: NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A) $25.90 [Enlarge Picture] Water Pump Repair Kit - For Models: Major, Power Major, Super Major. (Part No: E1ADKN8591) $42.39 [Enlarge Picture] Water Pump Repair Kit, w/ 2 Impellers - For Models: 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. Replaces FBPN8591B. (Part No: FBPN8591A) $103.75 [Enlarge Picture] Water Pump Seal - For Models: 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 1215, 1120, 1220, 2120. (Part No: SBA145126010) $17.16 [Enlarge Picture] Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR) $6.66 Water Pump w/ Gasket - Includes Gasket. For Models: (1910, 2110 1983 and up), (2120 1987 to 2 1999). (Part No: SBA145016540) $132.00 [Enlarge Picture] Water Pump w/ Hub - New. For Models: (1720, 1920 and 3415 all 1987 and up), 2120 (1999 and up). (Part No: SBA145017780) $99.90 [Enlarge Picture] Water Pump with Pulley - For Models: 1000, 1600. Replaces SBA145016022. Comes with gasket. (Part No: SBA145016061) $168.30 [Enlarge Picture] Water Pump, Early Style - For Models: 1500, 1700 and 1900. This pump uses an o-ring seal instead of a gasket. O-ring NOT included (available from dealer only). Replaces OEM# SBA145016510. (Part No: S.67682) $76.56 [Enlarge Picture] Water Pump, w/ Gasket - For Models: 3010S, (3830, 4430 Orchard), 3435, 3935, 4135. (Part No: 98497117) $114.20   Decals and Emblems Data Plate - Patent data plate, with drive screws to install. Restoration Quality. For tractors: 9N, 2N, {1939-1947}. (Part No: 9N14001) $10.76 [Enlarge Picture] Decal - For Model: 1700. Mylar Hood Decal Set. (Part No: F1700) $27.30 Decal - This decal set has 2 self adhesive stickers. For 3000 to 1968. (Part No: R0508) $30.70 [Enlarge Picture] Decal - This decal set contains 2 self adhesive stickers.For 2000 up to 1968. (Part No: R0506) $30.23 [Enlarge Picture] Decal Set - Decal set WITHOUT HOOD SET for Ford 600 Series. Order hood set separately. For models 601, 640, 641, 661 series tractors. Does not include "Workmaster" Decal. (Part No: R4666) $40.50 [Enlarge Picture] Decal Set - For 1700. Vinyl Hood Decal Set. (Part No: F1700VC) $39.23 Decal Set - For 8N, 2N, 9N. Decal for Fenders (2). Each decal is approx 8-3 4in. wide by 3-1 4in. tall. (Part No: R2006) $9.78 [Enlarge Picture] Decal Set - For Ford 640 WorkMaster. Set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. Printed on Vinyl. (Part No: R4122) $27.03 [Enlarge Picture] Decal Set - For Model: 2000 gas 1968-1975. (Part No: S.66683) $52.73 [Enlarge Picture] Decal Set - For 801, 841, 851, 861. Set contains decals for: fuel cap warning, duel valve, battery, air cleaner, draft control, upper link, PTO warning, fender script (2), hood side (2 red powermaster), numbers inserts 801, 841, 851, 861, (2 each black), service decal for under fuel door, instructions. (Part No: D8015862) $54.40 [Enlarge Picture] Decal Set - Hood Only Black and Red Ford 1910 Decal Set. (Part No: S.12099) $79.95 Decal Set - For model 2000. Set of 6 self adhesive decals. Printed on Vinyl. (Part No: R0507) $40.60 [Enlarge Picture] Decal Set - For Ford 601 Work Master. Set of 2 Self-adhesive decals. Dim photo because decal has meshing that is removed during installation. Printed on Vinyl. (Part No: R4121) $27.03 Decal Set - For Ford 641 WorkMaster. Set of 2 self-adhesive decals. Printed on Vinyl. (Part No: R4123) $27.03 Decal Set - For the Ford 901 Select O Speed. Set of 2 decals. Printed on Vinyl. (Part No: R4133) $30.00 Decal Set - For the Ford 701 Power Master. Set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. Printed on Vinyl. (Part No: R4125) $27.44 [Enlarge Picture] Decal Set - Hood only set for the Ford 841 Power Master. 2 Pieces. Printed on Vinyl. (Part No: R4128) $30.00 Decal Set - For Ford 901 Power Master. Set of 2 self-adhesive decals. Printed on Vinyl. (Part No: R4132) $30.50 Decal Set - This decal set contains 6 self adhesive stickers.For 3000 1968 and up. Printed on Vinyl. (Part No: R0509) $30.23 [Enlarge Picture] Decal Set - Hood only For Model: 2600. 6 pieces Printed on Vinyl. (Part No: R0517) $27.30 Decal Set - Hood Only Decal Set for Ford Model 3600, 6 pieces Printed on Vinyl. (Part No: R0518) $27.30 Decal Set - Hood Only Decal Set for Ford Model 3610 Force II to 1968, 5 pieces Printed on Vinyl. (Part No: R1500) $35.25 Decal Set - Hood Only Decal Set for Ford Model 5000, up to 1968, 2 pieces Printed on Vinyl. (Part No: R0512) $29.95 Decal Set - Combination Decal Set For Models 8N, 9N & 2N (1939-1952). Set of 10 self adhesvie decals. Contains Decals for Air Cleaner, Oil Filter, Position Control, PTO Warning, Hood Sides (Red Ford Name 2-1 4" x 5-1 4"), Fenders (Red Ford name 3-1 4" x 9")and Tachometer. Printed on Vinyl. (Part No: R2008) $25.11 [Enlarge Picture] Decal Set - Hood only set for Model 661 Workmaster. Printed on Vinyl. (Part No: R4124) $33.15 Decal Set - Decal Set for Ford Model 850 Power master. Printed on Vinyl. (Part No: R4129) $35.70 [Enlarge Picture] Decal Set - Hood only set for Model 860 Power master. Printed on Vinyl. (Part No: R4130) $35.70 Decal Set - Decal Set for Ford Model 861 Power master. Hood only Printed on Vinyl. (Part No: R4131) $35.70 Decal Set - Hood only set for Model 961 Power master. Printed on Vinyl. (Part No: R4134) $35.70 Decal Set - Hood only 5 piece set for Model 1710 Force II (From 1986). Printed on Vinyl. (Part No: R1495) $35.45 Decal Set - Blue and White Hood Only Decal Set for Ford Model 1910 Force II (From 1986) 5pc. Printed on Vinyl. (Part No: R1496) $46.90 Decal Set - Hood only 5 piece set for Model 2110 Force II (From 1986) Printed on Vinyl. (Part No: R1497) $42.90 Decal Set - Hood only set for Model 2610, 5pc. Printed on Vinyl. (Part No: R0528) $44.37 Decal Set - Hood only 5 piece set for Model 2610 Force II (From 1986). Printed on Vinyl. (Part No: R1498) $59.37 Decal Set - Hood only 5 piece set for Model 2910 Force II (From 1986). Printed on Vinyl. (Part No: R1499) $35.25 Decal Set - Decals for Ford Model 3400. Printed on Vinyl. HOOD DECALS ONLY (Part No: R4135) $34.32 Decal Set - Hood only 5 piece set for 3910 up to 1986. Printed on Vinyl. (Part No: R0530) $44.37 Decal Set - Hood only 5 piece set for 3910. Force II. Printed on Mylar. BLACK WITH WHITE LETTERING AND A REDISH ORANGE STRIPE. (Part No: R1501) $42.90 Decal Set - For 3930. Complete decal set. Printed on Vinyl. (Part No: R4136) $49.47 Decal Set - For 4100. Complete 6 piece set. Printed on Vinyl. (Part No: R0519) $36.21 Decal Set - Hood only 5 piece set for 4110. Printed on Vinyl. (Part No: R0531) $44.37 Decal Set - Hood only 5 piece set for 4110 after 1985, Force II. Printed on Vinyl. (Part No: R1502) $35.25 Decal Set - For 4600. Hood Only 4 piece set. Printed on Vinyl. (Part No: R0520) $36.21 Decal Set - For 4610. Blue and White Hood 5 piece set. Printed on Vinyl. (Part No: R0532) $44.37 Decal Set - Hood only 5 piece set for 4610 after 1985. Force II. Printed on Vinyl. (Part No: R1503) $43.62 Decal Set - Hood only set for 5030. Printed on Vinyl. (Part No: R4137) $49.47 Decal Set - For 5600. Hood only. (Part No: R0522) $37.23 Decal Set - Hood only 5 piece set for 5610 without cab 1981-1986. Printed on Vinyl. (Part No: R0533) $44.37 Decal Set - Hood only 5 piece set for 5610 after 1985. Printed on Vinyl. (Part No: R1504) $39.47 Decal Set - Hood only 6 piece set for 6600. Printed on Vinyl. (Part No: R0523) $40.29 Decal Set - For 6610 with cab 1981-1986. Complete 5 piece set. Printed on Vinyl. (Part No: R0536) $44.51 Decal Set - Hood only 5 piece set for 6610 without cab 1981-1986. Printed on Vinyl. (Part No: R0535) $45.39 Decal Set - Hood only 5 piece set for Model: 6610 From 1986. Printed on Vinyl. (Part No: R1505) $44.95 Decal Set - Hood only 5 piece set for 6700. Printed on Vinyl. (Part No: R0526) $53.04 Decal Set - Hood only 5 piece set for 6710 1981-1986. Printed on Vinyl. (Part No: R0539) $56.61 Decal Set - Hood only 5 piece set for 6710 From 1986. Printed on Vinyl. (Part No: R1507) $69.61 Decal Set - Hood only 6 piece For 7000. Printed on Vinyl. (Part No: R0516) $48.45 Decal Set - Hood only 6 piece set for 7100. Printed on Vinyl. (Part No: R0524) $40.87 Decal Set - For 7600. Complete 6 piece decal set. Printed on Vinyl. (Part No: R0525) $40.29 Decal Set - Hood only 5 piece set for 7610 with cab, 1985-1986. Printed on Vinyl. (Part No: R0538) $40.87 Decal Set - Hood only 5 piece set for 7610 Force II with cab 1981-1986. Printed on Vinyl. (Part No: R0537) $44.51 Decal Set - Hood only 5 piece set for Model: 7610 without cab 1981-1986. Printed on Vinyl. (Part No: R1506) $44.95 Decal Set - For 7700. Hood Only 4 piece set. Printed on Vinyl. (Part No: R0527) $53.04 [Enlarge Picture] Decal Set - Hood only 5 piece set for 7710 1981-1986. Printed on Vinyl. (Part No: R0572) $42.93 Decal Set - Hood only 5 piece set for 7710 From 1986. Printed on Vinyl. (Part No: R1508) $69.61 Decal Set - Hood only 5 piece set for 7910 1984-1986. Printed on Vinyl. (Part No: R1494) $40.87 Decal Set - Hood only 5 piece set for 7910 after 1985. Printed on Vinyl. (Part No: R1509) $66.94 Decal Set - For 8000. HOOD ONLY decal set. Printed on Vinyl. (Part No: R4138) $52.53 Decal Set - For 8N, 2N, 9N, all 1939-1947. Decal set for the Air Cleaner, Oil Filter Position (2) and PTO Warning. (Part No: FO1) $8.15 [Enlarge Picture] Decal Set - Hood only set for 8210, 1981-1986. 5 Piece Set. Printed on Vinyl. (Part No: R0585) $40.87 Decal Set - Hood only set for 8210, after 1986. 5 Piece Set. Printed on Vinyl. (Part No: R1510) $69.61 Decal Set - Hood only set for 8600. 6 Piece Set. Printed on Vinyl. (Part No: R4139) $53.04 Decal Set - Hood only set for 8700. Printed on Vinyl. (Part No: R4140) $55.08 Decal Set - For 9600. Hood only Decal Set. Printed on Vinyl. (Part No: R4141) $53.04 Decal Set - Hood only set for 9700. Printed on Vinyl. (Part No: R4142) $53.04 Decal Set - Hood only set for TW10. Blue and White. Printed on Vinyl. (Part No: R4143) $76.50 Decal Set - For TW15. Hood ONLY. Black and Red Decal Set, includes white "TW15". Printed on Vinyl. (Part No: R4144) $76.50 Decal Set - Hood only set for TW20. Blue and White. Printed on Vinyl. (Part No: R4145) $76.50 Decal Set - For TW25. Hood Only. Black and Red Decal Set. Printed on Vinyl. (Part No: R4146) $76.50 Decal Set - Hood only set for 2750. Printed on Vinyl. (Part No: R3772) $51.46 Decal Set, 62-64Gas - Complete set for 1962-64 Gas 4000. (Part No: S.67696) $53.16 Decal Set, 68-75 Gas - Hood Set for Ford Model 4000, 1968 & up, 6 pieces Printed on Vinyl. (Part No: F503HB) $29.99 [Enlarge Picture] Decal Set, 60-68 Gas - Hood Set for Ford Model 4000, up to 1968, 2 pieces Printed on Vinyl. (Part No: F503HA) $27.30 [Enlarge Picture] Decal Set, 68-75 Diesel - Complete 15 piece set. For Model: 4000 diesel 1968-1975. (Part No: S.66692) $76.70 [Enlarge Picture] Decal Set, 68-75 Gas - Complete 15 piece set. For Model: 4000 gas 1968-1975. (Part No: S.66691) $46.01 Decal Set, Blue & White - Set of 2 "SU" decals. For Models: 4000SU, 4600SU. (Part No: S.67554) $23.34 Decal Set, Complete - Decal set for ford 800 Series. For Model: 800. (Part No: R4667) $40.50 [Enlarge Picture] Decal Set, Complete - 15 decals per set. For Model: 2000 diesel 1968-1975. (Part No: S.66684) $52.73 Decal Set, Complete - 15 decals per set. For Model: 3000 gas 1968-1975. (Part No: S.66687) $46.70 [Enlarge Picture] Decal Set, Complete - For model: 3000 diesel 1968-1975. (Part No: S.66688) $46.01 [Enlarge Picture] Decal Set, Complete - 15 decals per set. For Model: 5000 diesel 1968-1975. (Part No: S.66693) $49.83 [Enlarge Picture] Decal Set, Complete - For Models: NAA, Jubilee. (Part No: R4665) $30.00 [Enlarge Picture] Decal Set, Complete - Hood decals are vinyl cut. For Model: 900. (Part No: R4668) $40.50 [Enlarge Picture] Decal Set, Hood - For Model: 1900. (Part No: F1900VC) $28.94 Decal Set, Hood - For Model: 1900. (Part No: F1900) $20.48 [Enlarge Picture] Decal Set, Hood - For Model: 9000. (Part No: R4676) $73.15 [Enlarge Picture] Decal Set, Hood - For Model: 7840. (Part No: R4675) $53.86 Decal Set, Hood - For Model: 7740. (Part No: R4674) $53.86 Decal Set, Hood - For Model: 6640. (Part No: R4673) $53.86 [Enlarge Picture] Decal Set, Hood - For Model: 971 w Select-O-Speed. (Part No: R4672) $46.55 Decal Set, Hood - For Model: 871 w Select-O-Speed. (Part No: R4671) $46.55 Decal Set, Hood - For Model: 771 w Select-O-Speed. (Part No: R4670) $46.55 Decal Set, Hood - For Model: 601 w Select-O-Speed. (Part No: R4669) $46.55 Decal Set, Hood - For Model: 2000 with Jubilee style sheet metal. (Part No: R5196) $22.50 Decal Set, Hood - For Model: 3000 with Jubilee style sheet metal. (Part No: R5197) $22.50 Decal Set, Hood - For Model: 4000 with Jubilee style sheet metal. (Part No: R5198) $22.50 Decal Set, Hood - For Model: 5000 with Jubilee style sheet metal. (Part No: R5199) $22.50 Decal Set, Hood - For Model: 1215. (Part No: R5201) $35.25 Decal Set, Hood - For Model: 1220. (Part No: R5202) $35.25 Decal Set, Hood - For Model: 1310. (Part No: R5203) $35.25 Decal Set, Hood - For Model: 1500. (Part No: R5204) $27.30 Decal Set, Hood - For Model: 1510. (Part No: R5205) $35.25 Decal Set, Hood - For Model: 1600. (Part No: R5206) $27.30 Decal Set, Hood - For Models: 1720. (Part No: R5208) $35.25 Decal Set, Hood - For Model: 2310. (Part No: R5210) $35.25 Decal Set, Hood - For Model: 2810. (Part No: R5211) $35.25 Decal Set, Hood - For Model: 8630. (Part No: R5212) $61.84 Decal Set, Hood - For Model: TW30. (Part No: R5214) $73.15 Decal Set, Hood - For Model: TW35. (Part No: R5215) $73.15 Decal Set, Hood - Blue and white, hood only. For Model: 2110. (Part No: R5341) $35.25 Decal Set, Hood - For Model: 1210. (Part No: R5340) $35.25 Decal Set, PowerMaster - For the Ford 801 Power Master. Set of 2 self-adhesive decals. Printed on Vinyl. (Part No: R4126) $29.99 [Enlarge Picture] Decal Set, Red & White - Set of 2 "SU" decals. For Models: 4000SU, 4600SU. (Part No: S.66826) $14.60 Decal Set, Select O Speed - For the Ford 801 Select O Speed. Set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. Printed on Vinyl. (Part No: FO801) $29.99 [Enlarge Picture] Decal, Fear This Ford - 12-1 2 x 3. For all Ford tractors. (Part No: S.67825) $18.08 [Enlarge Picture] Decals, Hood Set - For Models: 8N, 2N, 9N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005) $7.72 [Enlarge Picture] Decals, Hood Set - For Model: 4400. (Part No: F4400) $20.72 Ford Letter Set - Chrome and Red letter set For (2000, 4000 1962-64), (2000, 3000, 4000, 5000 1965 to 1 1971). (Part No: 86514060) $22.86 [Enlarge Picture] Ford Script Painting Mask - Includes 1 smaller 7-1 4" x 1-3 4" and 1 large 9" x 3" painting masks. For Models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163) $18.86 [Enlarge Picture] Ford Script Painting Mask - Includes 1 small 5-3 8" x 2-1 4", and 1 large 8-5 8" x 3" painting masks. For Model: 8N. Application directions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.61441) $20.14 [Enlarge Picture] Front Emblem - Fits Fordson Major. (Part No: E1ADKN8212C) $27.15 [Enlarge Picture] Front Emblem - For Model: 900 (Part No: NDB16600A) $70.09 [Enlarge Picture] Front Emblem - Restoration quality w studs & retaining clips. Chrome, gold and red. For Models: 801, 901 (58-62) (Part No: 311232) $72.15 [Enlarge Picture] Front Emblem - Chrome plated copper coated alloy. For Model: Fordson Dexta 1957-10 1960. (Part No: 957E8213A) $146.90 [Enlarge Picture] Front Emblem - Chrome plated copper coated alloy. For Model: Fordson Super Dexta. (Part No: 957E8213B) $247.91 [Enlarge Picture] Hood Decal Set - For Ford 1100. Hood Decal Set only - 2 Pcs. (Part No: F1100VC) $28.93 Hood Decal Set - For 4500 Ford Industrial Construction. Hood Decal Set. (Part No: F4500) $23.95 Hood Decal Set, 62-64 Gas - Hood Set 2-Piece for 4000. (Part No: FJUB4000) $26.32 [Enlarge Picture] Hood Emblem - For NAA. Just like original Hood Emblem. (Part No: C0NN16600) $47.44 [Enlarge Picture] Hood Emblem - Two piece emblem set says "Ford" and "Ferguson System", includes 355870-S speed nuts. Cast aluminum, dull finish with black outline and lettering. For tractors 9N & 2N. (Part No: 2N16600) $21.95 [Enlarge Picture] Hood Emblem - 8N (bright metal with red enamel background). (Part No: 8N16600A) $33.95 [Enlarge Picture] Hood Emblem - Restoration quality w studs and retaining clips. For Models: NAA (not Jubilee), 501, 601, 701, 801, 861, 901, 1801, 2031, 4030, 4031, 4040, 4140. Chrome, Gold and red. (Part No: 311231) $66.99 [Enlarge Picture] Hood Emblem - 600 (bright metal with red background). Just like original. Licensed by Ford. (Part No: NCA16600A) $46.82 [Enlarge Picture] Hood Emblem - 800 (bright metal with red background) (Part No: NDA16600A) $49.82 [Enlarge Picture] Hood Emblem - 8N One piece emblem. Cast aluminum, dull finish with red outline and lettering. (Part No: 8N16600B) $24.95 [Enlarge Picture] Hood Emblem for Jubilee - For Golden Jubilee Model. Just like original (Part No: NAA16600A) $44.96 [Enlarge Picture] Hood Emblem, Front - Chrome plated. For Model: Fordson Super Major. (Part No: S.67278) $159.17 [Enlarge Picture] Hood Emblem, Side - Chrome plated. For Model: Fordson Power Major. (Part No: S.67276) $119.70 [Enlarge Picture] Hood Emblem, Side - Chrome plated. For Model: Fordson Super Major. (Part No: S.67277) $145.96 [Enlarge Picture] Hood Emblem, Side - Chrome Plated. For Model: Fordson Major. (Part No: S.67275) $119.70 [Enlarge Picture] Hood Ornament - For Models: (2000, 4000 4-cylinder 1692-1694). (Part No: C3NN16B748A) $59.18 [Enlarge Picture] Plate - Patent data plate, with drive screws to install. For tractors: 8N, {1948-1952}. (Part No: 8N14001) $7.16 [Enlarge Picture] Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Part No: SHERMAN) $14.95 [Enlarge Picture] Shift Pattern Decal - For Models: 2000, 3000 both 8 speed with live PTO. (Part No: C5NN7B292FY) $11.74 [Enlarge Picture] Shift Pattern Decal - For Models: 4000, 4600 with 8 speed transmissions. (Part No: C5NN7B292FN) $11.74 [Enlarge Picture] Shift Pattern Decal - For Models: 5000, 7000 with 8 speed transmissions. (Part No: D3NN7B292B) $11.74 [Enlarge Picture] Shift Pattern Decal - For Models: 2000, 3000 with 4 speed transmissions. (Part No: S.67192) $11.74 Shift Pattern Decal - For Models: 2000, 3000, 2600, 3600 all with 6 speed transmissions. (Part No: S.67193) $11.74   Drive Train 6 Speed Transmission Parts - Click 'ENLARGE PICTURE' at right to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. (Part No: SPX_F5_1) $0.00 [Enlarge Picture] Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N4235C) $139.90 [Enlarge Picture] Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee. This includes rear axle bearing(2N4221) and cup(9N4222). (Part No: S.18516) $42.95 [Enlarge Picture] Axle Bearing Cone - Tapered Bearing Cone. For Models: 2000, 3000, Dexta. (Part No: E18EB9) $24.69 [Enlarge Picture] Axle Bearing Cup - Tapered Cup. For Models: 2000, 3000, DEXTA. (Part No: E19EB9) $13.96 [Enlarge Picture] Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1 4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $24.24 [Enlarge Picture] Axle Collar - For Models: 2N, 9N. (Part No: 9N4132) $14.32 [Enlarge Picture] Axle Kit - Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For Model: 8N (Part No: AXLEKIT-8N) $171.60 [Enlarge Picture] Axle Kit - Kit contains, 2 shaft bearings, 2 housing gaskets, 2 shaft collars, 2 bearing cups, 2 housing gaskets, 2 outer seal assemblies, 2 rear axle rings. For Models: 9N, 2N, 8N 1948. Kit comes with 2 sets of outer axle seals one for use on 9N, 2N tractors and one for 8N. (Part No: AXLEKIT-8NEARLY) $165.78 [Enlarge Picture] Axle Kit, Rear - Kit contains 2 rear axle shaft bearings, 2 Rear axle washers, 2 rear axle housing gaskets, 2 rear axle shaft bearing cup, 2 rear axle nut and lock rings, 2 rear axle shaft gaskets, 2 rear axle seals, 2 rear axle outer oil seals, 2 axle housing to center housing gaskets. For Models: NAA, Jubilee. (Part No: AXLEKIT-NAA) $146.94 [Enlarge Picture] Axle Nut & Snap Ring - Kit, nut & snap ring. For Models: 8N, NAA. (Part No: CBPN4179A) $7.03 [Enlarge Picture] Axle Oil Seal, Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290) $.99 [Enlarge Picture] Axle Oil Seal-Outer - For models 8N to S N 486753. Inside Diameter 2 3 4 inch. Rear axle oil seals. Also comes as part of A8NN4248A Assembly. Packaged in qty of 2, price is for a pair. (Part No: A8NN4251A) $24.96 [Enlarge Picture] Axle Outer Retainer - For Model: 8N to S N number 486753. Rear Axle Outer Retainer. These retainers come with seals and gaskets. Order Qty of 1 for a set of 2. (Part No: A8NN4248A) $26.46 [Enlarge Picture] Axle Outer Retainer Gasket - Requires 2. For Models: 8N 1948-1950. (Part No: 8N4225) $1.56 [Enlarge Picture] Axle Rear Collar - For Models: 600, 800, 601, 801, 2000, 4000. (Part No: NCA4132A) $17.48 [Enlarge Picture] Axle Ring - For 8N 1948-1953, Jubilee & NAA.``Snap Ring - Sold In Lots Of 10, priced each. (Part No: 8N4187) $1.78 [Enlarge Picture] Axle Seal, Inner Pair - Seal, Oil For 8N, JUBILEE, NAA.Enter QTY 1 For PKG of 2. (Part No: 8N4233A) $8.37 [Enlarge Picture] Axle Seal, Outer Pair - For Models: 8N S N 486753 UP, NAA, Jubilee. Comes in pairs. 3 3 4 OD, 2 7 8 ID. (Part No: D5NN4115A) $13.33 [Enlarge Picture] Axle Shaft Bearing - Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221) $41.44 [Enlarge Picture] Axle Shaft Gasket - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2 inch, OD = 2 1 4 inch. (Part No: 8N4284) $2.98 [Enlarge Picture] Axle Shaft Nut - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179) $4.86 [Enlarge Picture] Axle Shaft Seal - Seal & retainer assembly, outer, for rear axle shaft. For Models: 3910, 4000, 4100, 4110, 4600, 4610, 5000. (Part No: C5NN4969D) $28.08 [Enlarge Picture] Axle Shaft Seal - Seal & retainer assembly, outer, for rear axle shaft. For Models: 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C5NN4969E) $21.84 [Enlarge Picture] Axle Washer - For model 8N. (price shown is for EACH, minimum Qty is 2. (Enter '2' in QTY box. ) (Part No: 8N4293) $2.48 [Enlarge Picture] Bearing Cone - Bearing cone, differential bearing. For Models: 4120, 800, 801. (Part No: NDA4221A) $29.83 [Enlarge Picture] Bearing Cone, Rear Axle - Rear Axle Outer Bearing Cone. For Models: 2120, 4120, 600, 800. (Part No: NCA44224A) $44.68 [Enlarge Picture] Bearing Cone, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Part No: C5NN4N221B) $15.44 Bearing Cone, Rear Pinion - Bearing, Tapered Cone, rear pinion. (Part No: NCA4630A) $30.64 [Enlarge Picture] Bearing Cone, Rear Pinion - Bearing, Tapered Cone, Rear Pinion. (Part No: NDA4630A) $36.54 [Enlarge Picture] Bearing Cup - Bearing cup, differential bearing. For Models: 4120, 800, 801. (Part No: NDA4222A) $20.90 [Enlarge Picture] Bearing Cup - Bearing, Tapered Cup<>Rear Pinion Cup. For Models: 3500, 4120, 800, 801. (Part No: NDA4628A) $16.46 [Enlarge Picture] Bearing Cup - Bearing, Tapered Cup<>Rear Pinion Cup. For Models: 2120, 4120, 600, 601, 800, 801. (Part No: TBAA4628A) $34.87 [Enlarge Picture] Bearing Cup - Bearing, Tapered Cup For MAJOR, (Part No: 14283) $22.06 [Enlarge Picture] Bearing Cup, Rear Axle - For 4000, 4100, 4110 4600, 4610. (Part No: C5NN4874B) $6.98 Bearing, Transmission - Used in 4 and 5 Speed Transmissions. For Models: 2000, 4000, 600, 800, 900. (Part No: M1208EL) $37.84 [Enlarge Picture] Bearing, Transmission, Output Shaft - For Models: 2000 & 4000 1965 and prior, 600, 800, 900. All the above with 5 speed transmissions. (Part No: NDA77060A) $19.33 [Enlarge Picture] Bolt, Differential Ring Gear - 1 2"-20. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 series all 1953 to 1964. Sold in multiples of 4, priced individually. There are 12 required for ring gear CEPN4210B and 16 required for ring gear CEPN4210C. (Part No: NAA44215A) $4.35 [Enlarge Picture] Bushing Front Axle - Bushing for front axle pin, manual or power steering. For Models: 2000, 3000. (Part No: C5NN3153C) $9.46 [Enlarge Picture] Countershaft - Fits 8N. (Part No: 8N7111) $127.15 [Enlarge Picture] Countershaft - For Models: 600, 700, 800, 2000, 4000 (1955-64), and for 2000, 3000 4-speed transmission with PTO (1965-70). Also replaces NDA7111C. (0622R) (Part No: C5NN7N109A) $181.76 [Enlarge Picture] Countershaft - For 2N, 9N, both with 3 speed transmission. Countershaft. (0621R) (Part No: 9N7111) $134.62 [Enlarge Picture] Countershaft - For NAA, Jubilee. Countershaft. (Part No: NAA7111C) $166.29 [Enlarge Picture] Countershaft Bearing Cone - Transmission Countershaft Bearing Cone - Front. For 4 and 5 Speed transmissions. For models: 2000 and 4000 before 1964, and 600, 800, 900. (Part No: NDA77123A) $9.49 [Enlarge Picture] Countershaft Bearing Cup - Transmission Countershaft Bearing Cup for 4 and 5 speed transmissions. For models: 2000 and 4000 prior to 1964, and for 600, 800, 900. (Part No: NDA77124A) $6.97 [Enlarge Picture] Countershaft, Main, Transmission - 16 16 tooth, 26 26 spline, 10.125" long. For Models: Dexta, Super Dexta. (Part No: 957E7111D) $107.32 [Enlarge Picture] Countershaft, Transmission - 16 18 26 teeth, 23 ID splines. For Models: (2000, 3000, 3600, 3610 all w 8 spd trans, w trans PTO from 9 1965 and up). (Part No: C5NN7111M) $272.51 [Enlarge Picture] Countershaft, Transmission - 16 18 tooth, 26 spline, 10.00" long. For Models: (2000, 3000, 4000 all w live PTO, 8 spd trans., built from 9 1965 and up). (Part No: C5NN7111N) $325.70 [Enlarge Picture] Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For Models: 2000, 3000, 3600, 3610 all w 8 speed trans. (Part No: E0NN7106BA) $88.32 [Enlarge Picture] Cover - Cover assembly, transmission case. For Models: 2000, 3000, 4000. (Part No: C5NN7211F) $43.44 [Enlarge Picture] Differential Bearing - For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Dexta, Super Dexta, TS100, TS110, TS115, TS80, TS90. (Part No: 81803420) $78.97 [Enlarge Picture] Differential Front Pinion Bearing Cup - For Models: 2120, 3500, 4120, 600, 601, 800, 801. (Part No: NCA4616A) $11.90 [Enlarge Picture] Differential Gasket Kit - Diff. gasket and o-ring kit. Contains: NAA502A, NAA4036A(2), C5NN747A, NAA4662B, 8N6734, 8N7011, 12-OR(3), 17-OR(3). For JUBILEE, NAA. (Part No: DGKNAA) $13.70 [Enlarge Picture] Differential Gasket Kit - Diff. gasket and o-ring kit: 13 pieces. For Models: 600, 700, 900. (Part No: DGK679) $9.68 Differential Gasket Kit - Diff. gasket and o-ring kit. For Models: 800. (Part No: DGK800) $10.50 [Enlarge Picture] Differential Gasket Kit, 6 Pieces - Fits 9N, 2N, 8N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928) $6.70 [Enlarge Picture] Differential Lock Gear Case Adaptor - For Models: 2000, 3000, 5000, 6600, 6610. (Part No: E186EB9) $110.62 [Enlarge Picture] Differential Lock Nut - For Models: 2000, 231, 233, 2600, 3000, 333, 335, 3600, 4110, 531. (Part No: C5NN4N001A) $13.83 [Enlarge Picture] Differential Pinion - For Models: 2120, 601. (Part No: C0NN4609K) $173.27 Differential Pinion Bearing Cone - For Models: 2000 1965>, 2N 1939-52, 3000 1965>, 4110 1965>, 600 W 4 SP. TRANS. SN<54165 - 1958, 5 SP. SN<196155 - 1959, 601 W 4 SP. TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 8N 1939-52, 9N 1939-52, DEXTA 1957-1964, NAA 1953-54. (Part No: BB4221B) $22.84 [Enlarge Picture] Differential Pinion Bearing Cup - Bearing cup, differential bearing For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, DEXTA, JUBILEE, NAA (Part No: BB4222) $7.45 [Enlarge Picture] Differential Pinion Bearing Cup, Front - For Models: 2N 1939-52, 8N 1939-52, 9N 1939-52, DEXTA 1957-4 1962, NAA, Jubilee 1953-54. (Part No: BB4616B) $34.50 [Enlarge Picture] Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4 1962, NAA, Jubilee 1953-1954. (Part No: BB4621B) $30.95 [Enlarge Picture] Differential Pinion Front Cone - Fits 2120 W 4 SP. TRANS. SN54166> (1958-62), 5 SP. SN106116> (1960-64), 3500 (1965-1972), 4120 W 4 SP. TRANS. SN54166> (1959>), 5 SP. SN106115> (1959>), 600 W 4 SPEED TRANS. SN<54165 (1958), 5 SPEED SN<196155 (1959), 601 W 4 SP. TRANS. SN54166> (1958-62), 5 SP. SN106116> (1960-64) , 800 W 4 SP. TRANS. SN<54166 (1958), 5 SP. SN<106115 (1960) , 801 W 4 SP. TRANS. SN54166> (1959>), 5 SP. SN106115> (1959>) (Part No: D1NN4N028A) $27.02 [Enlarge Picture] Differential Pinion Pilot Bearing - For Models: 2120 W 4 SP.TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 600 W 4 SP.TRANS. SN<54165 - 1958, W 5 SP. S N <196155 -1959, 601 W 4 SP.TRANS. S N 54166> -1958-62, 5 SP. S N 106116> - 1960-64, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2) $120.35 [Enlarge Picture] Differential Pinion Pilot Bearing - For Models: 2N (1939-1952), 4120 W 4 SP. TRANS. S N 54166> - 1959>, 5 SP. S N 106115> - 1959>, 800 W 4 SP. TRANS. S N <54166 - 1958, 5 SP. S N <106115 - 1960, 801 W 4 SP. TRANS. SN54166> - 1959>, 5 SP. S N 106115> - 1959>, 8N (1939-1952), 9N (1939-1952) (Part No: BB4625B) $43.67 [Enlarge Picture] Differential Pinion Seal - For Models: (2120 w 4 speed trans s n 54166 and up, 5 speed s n 106116 and up), (4120 w 4 speed trans s n 54166 and up, 5 speed 106115 and up), (600 w 4 speed trans s n 54165 and below, 5 speed s n 196155 and below), (601 w 4 speed trans s n 54166 and up, 5 speed s n 106116 and up), (800 w 4 speed trans s n 54166 and below, 5 speed trans s n 106115 and below), (801 w 4 speed trans s n 54166 and up 5 speed trans s n 106115 and up). (Part No: 312356) $10.82 [Enlarge Picture] Differential Pinion Shaft - Pinion Shaft w pilot bearing 11 1 2 inches overall length, 10-spline for 601, 4-speed trans to s n 54165 (1958) OR 5-speed trans to s n 106155(1959). Matching ring gear is no longer available. (Part No: NCA4609B) $141.75 [Enlarge Picture] Drive Shaft, Transmission - 17 tooth, 15 spline, 16.50" long. For Models: Dexta, Super Dexta. (Part No: 957E7017C) $120.88 [Enlarge Picture] Front Axle Bearing - For Models: 250C, 260C, 340A, 340B, 345C, 345D, 3500, 3550, 4400, 445, 445A, 4500, 455, 515, 535, 545, 550, 555, 555A, 555B, 655, 655A, 5400. (Part No: C7NN3123A) $17.17 Gasket, Axle housing to center - Gasket center housing to rear axle hsg. Tractors: NAA, 600, 2120, LCG (1953 & up). (Part No: NAA4036A) $1.95 Gasket, Differential Center Housing, Side Cover - For Models: 2N, 8N, 9N. Price is for each. (Part No: 9N4131) $.99 [Enlarge Picture] Gasket, Gear Shift Cover Plate - For 4-SPEED transmissions. For Models: 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Sold in lots of 5, priced each. (Part No: 8N7223) $2.04 [Enlarge Picture] Gasket, Gear Shift Cover Plate - For all models with 5-SPEED transmission built between 1955-1964.***Must be ordered in multiples of 5.*** Priced Each. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: NDA7223A) $2.52 [Enlarge Picture] Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, Jubilee, NAB. SOLD IN QUANTITIES OF 5, PRICE IS FOR 1. (Part No: 9N7086) $0.73 [Enlarge Picture] Gasket, Paper Shim, For Bearing Retainer - Fits Ford 9N, 2N, 8N, NAA & Jubilee, Replaces #9N4130 & #8N4229 ``Note: (Use for seal between bearing retainer and axle housing or backing plate. Use in multiples to replace shims #8N4229. Price is for each. (Part No: 9N4130) $.99 [Enlarge Picture] Gasket,, Rear axle housing gasket - Gasket center housing to rear axle housing. Tractors: 9N, 2N, 8N. (Part No: 2N4035) $2.00 [Enlarge Picture] Gear Shaft, Reverse Idler - Reverse Idler Gear Shaft. For Models: 2000, 2120, 2130, 2131, 4000, 4120, 4121, 4130, 4131, 4140, 600, 601, 650, 651, 660, 661, 800, 801, 820, 821, 850, 851, 860, 861, 900, 901, 950, 951, 960, 961. (Part No: NDA7140A) $38.34 [Enlarge Picture] Gear Shift Connector & Coupling - 17 spline, 3.850" O.D. For Models: 2000, 3000, 3600, 3610 all w 8 speed trans. (Part No: E344GA9) $106.84 [Enlarge Picture] Gear Shift Coupler, Front - 28 teeth, 17 splines. For Models: 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Part No: E6NN7N072AA) $66.78 [Enlarge Picture] Gear Shift Coupler, Rear - 28 teeth , 20 spline. For Models: 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Part No: 82983825) $85.73 [Enlarge Picture] Gear Shift Lever, w/ Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 5 16 in. UNF thread for the shift knob (knob included) The early series 3 8 shaft is no longer available. Note: uses gear shift knob p n BB7213A. Fits: 8N, NAA, Jubilee, 600, 700, 800, 900, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $67.90 [Enlarge Picture] Gear Shift Pin - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w 3 & 4 Speed transmission). (Part No: 9N7221B) $3.25 [Enlarge Picture] Gear Shift, Rail - High Low. For Models: 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Part No: C5NN7240AD) $32.88 [Enlarge Picture] Gear shift assembly - For Models: 5000, 5100, 5200, 7000, 7100, 7200 (Part No: C5NN7222) $129.90 [Enlarge Picture] Gear, 1st - 49 28 teeth, 1.775" ID, 7.125" OD. For Models: 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Part No: C5NN7100A) $195.93 [Enlarge Picture] Gear, 1st - 46 28 tooth. For Models: 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces E6NN7N100AA, C5NN7N100C. (Part No: 83960019) $175.34 [Enlarge Picture] Gear, 1st & 3rd - 49 28 tooth, 1.775" ID, 7.250" OD. For Models: Dexta, Super Dexta. (Part No: 957E7100C) $106.17 [Enlarge Picture] Gear, 1st, 4 Speed Transmission - 60 28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $200.14 [Enlarge Picture] Gear, 2nd - For 8 speed transmissions. 43 28 teeth, 1 13 16" I.D. Models: 2000, 3000, 3600, 3610. (Part No: C5NN7102F) $239.10 [Enlarge Picture] Gear, 2nd & 5th - 41 28 Tooth, 1.775" I.D, 6.125" O.D. For Models: 2000, 2300, 2600, 3000, 3400, 3600, 4000, 4110, 4200, 4340, 4400, 4500 all w 6 speed transmissions. (Part No: 957E7101B) $92.68 [Enlarge Picture] Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $106.40 [Enlarge Picture] Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All w 4 speed transmissions. (Part No: 8N7102) $182.70 [Enlarge Picture] Gear, 3rd, 8 Speed Transmission - 28 35 teeth. For Models: 2000, 3000, 3600, 3610 all w 8 spd trans. (Part No: C5NN7B340A) $218.38 [Enlarge Picture] Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $227.75 [Enlarge Picture] Gear, Countershaft, 6 Speed Transmission - 37 teeth, 16 & 20 splines. For Models: (2000, 3000, 4000 all w 6 spd trans.) (Part No: C5NN7113A) $302.24 [Enlarge Picture] Gear, Countershaft, 6 Speed Transmission - 24 middle teeth, 57 OD teeth, 26 spline. For Models: (2000, 3000, 4000 all w 6 spd trans.) (Part No: C5NN7113G) $295.77 [Enlarge Picture] Gear, Countershaft, 8 Speed Transmission - 30 ID teeth, 56 OD teeth, 26 ID internal spline. For Models: (2000, 3000, 3600, 3610 all w 8 spd trans.) (Part No: C5NN7113D) $281.33 [Enlarge Picture] Gear, Countershaft, 8 Speed Transmission - 30 middle teeth, 46 OD teeth, 26 spline. For Models: (2810, 2910, 3550, 3910, 4000, 4610 all w 8 spd trans.) (Part No: C5NN7113J) $296.16 [Enlarge Picture] Gear, Differential Side - Part 1 in the picture. For Models: (2000, 3000, 4000 all 1965-1975 LH w diff. lock, LH or RH w o locks), (5000, 7000 all 1965-1975 RH w Diff. lock, LH RK w o diff locks), (2600, 3600, 4100, 4600 all 1975-1981 LH w diff. lock, LH RH w o locks), (5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 RH w Diff. lock, LH RH w o locks), (2610, 3610, 4110 all 1981 and up LH w diff lock, LH RH w o locks), (5610, 6610, 6710, 7610, 7710 all 1981 and up RH w diff lock, LH RH w o locks). (Part No: C5NN4236A) $72.57 [Enlarge Picture] Gear, Differential Side - Part 2 in picture. For Models: (2000, 3000, 4000 all 1965-1975 RH w diff. lock), (2600, 3600, 4100, 4600 all 1975-1981 RH w diff. lock), (2610, 3610, 4110, 4610 all 1981 and up RH w diff. lock). (Part No: C5NN4239A) $68.09 [Enlarge Picture] Gear, MFWD Planetary - 34 Tooth, ZF AXLE For models TW5, TW15, TW25, 7910, 8210, 8530, 8630, ALL APL355, 6710, APL345, 350, 7010 W 4WD-APL345, 7610, 7710, ALL APL345 350.Replaces T82568, L41120 (Part No: ZP4472353463) $175.16 [Enlarge Picture] Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $97.32 [Enlarge Picture] Gear, Reverse - 28 & 32 teeth. For Models: 2000, 3000, 4000 all w 6 speed transmissions. (Part No: C5NN7K013B) $116.27 [Enlarge Picture] Gear, Reverse - 28 32 tooth, 1.800" I.D, 4.800" O.D. Replaces C5NN7N012B. For Models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. (Part No: E6NN7N012AA) $126.83 [Enlarge Picture] Gear, Reverse - 28 32 tooth, 1.800" ID, 4.800" OD. For Models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Part No: 83960462) $126.83 [Enlarge Picture] Gear, Reverse - For Models: 2000, 3000, 4000, all with 8 speed transmission 9 1965>. Reverse Gear. 30 & 28 teeth. Replaces C5NN7K013A. (Part No: C5NN7K013E) $79.88 [Enlarge Picture] Gear, Reverse Idler , 8 Speed Transmission - 33 teeth. For Models: (2000, 3000, 3600, 3610 all w 8 spd trans.) (Part No: C5NN7141A) $168.93 [Enlarge Picture] Gear, Reverse Idler , 8 Speed Transmission - 31 teeth. For Models: (2000, 3000, 3600, 36100 all w 8 spd trans). Replaces C5NN7141B. (Part No: 81813479) $211.13 [Enlarge Picture] Gear, Reverse, 8 Speed Transmission - 30 28 teeth, 17 spline. For Models: (3000, 4000, 5000, 7000 all w 8 spd trans 1965-69). (Part No: C5NN7N012A) $129.17 [Enlarge Picture] Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For Models: 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Part No: E49GA9) $61.44 [Enlarge Picture] Gear, Transmission Countershaft - 50 teeth, 11 splines. For Models: 2810, 2910, 3230, 3430, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4830. (Part No: D1NN791A) $144.14 [Enlarge Picture] Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $154.54 [Enlarge Picture] Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $69.06 [Enlarge Picture] Hub Carrier, Shaft - Used with the following tractors that use APL135 FWD Axle: 585, 644, 685, 743, 744, 745, 745S, 785, 844, 844S, 856, 885. Replaces 1502272C1. (Part No: 3232082R91) $200.05 [Enlarge Picture] Input Shaft - 4 Speed, 15 Spline. For Models: 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 841, NAA, NAB, Jubilee. (Part No: 311203) $260.62 [Enlarge Picture] Input Shaft, Transmission - For Models: 5000, 5100, 5600, 6600, 6700, 7100, 7200, 7600, 7700. All w o dual power. (Part No: C5NN7017A) $129.33 [Enlarge Picture] Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $7.80 [Enlarge Picture] Main Shaft - 30 18 teeth. For Models: (5000 w dual power 6 1973 and up), (5600, 6600, 6700, 5610, 6610, 6710, 6810 w dual power), 7810, 8010, 5610S, 6610S, 7610S, 7810S, (5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110 w 8 spd less dual power, 16 spd w dual power). Replaces E7NN7C094AA. (Part No: 82983066) $198.48 [Enlarge Picture] Main Shaft Connecting Coupling - For Models: 2000, 3000, 8N, NAA, Jubilee all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $50.65 [Enlarge Picture] Main Shift Lever - For 1, 2, & 3rd Speed Gears. Also replaces 957E7210C. 11.89 inchesl long. (Part No: 81717916) $69.96 Mainshaft, Transmission - 28 28 tooth, 17 spline, 11.875" long. For Model: Dexta. (Part No: 957E7061E) $191.35 [Enlarge Picture] Mainshaft, Transmission - 17 tooth, 15 spline, 17.675" long. For Models: (2000 w 6 speed UK, 7 speed transmission). (Part No: C5NN7017H) $140.47 [Enlarge Picture] Mainshaft, Transmission, Rear - 30 teeth, 17 & 28 splines. For Models: (2000, 3000, 3600, 3610 all w 8 spd trans.) (Part No: C5NN7C095D) $317.81 [Enlarge Picture] Mainshaft, Transmission, Select-o-Speed - 30 teeth, 16 & 18 splines. For Models: (2000, 3000, 4000, 5000 all select-o-speed #2 & #3 clutch). (Part No: C5NN7C094B) $349.36 [Enlarge Picture] Oil Seal, Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $3.90 [Enlarge Picture] Oil Seal, Rear Axle, Inner - This is an inner oil seal for the rear axle. For Models: Dexta, Super Dexta. (Part No: 195555M1) $7.72 [Enlarge Picture] Oil Seal, Rear Axle, Outer - This is an outer oil seal for the rear axle. For Models: Dexta, Super Dexta. (Part No: 957E4250A) $8.00 [Enlarge Picture] Oil Seal, Secondary Output Shaft - For Models: 2000, 2600, 3000, 3600, 4000 all w 6 speed transmission, Dexta, Super Dexta. (Part No: E42GA9) $5.72 [Enlarge Picture] Pinion Gear - For Models: 601, 2120, 4 speed ser. no. 54166 and later or 5 speed ser. no. 106116 and later and 10 speeds. 23 Spline. This is a USED Part, 1 yr warranty. (Part No: NAA4609B) $575.33 Rear Axle Bearing and Cup - For Dexta, Super Dexta. Replaces E18EB9, E19EB9. (Part No: S.65478) $30.40 [Enlarge Picture] Rear Axle Oil Seal - For Models: Dexta, Super Dexta. (Part No: 81717238) $14.86 [Enlarge Picture] Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. Inside diameter 2 5 8 inches. For tractors~ 9N, 2N, (1939-1947). 2.437-I.D. 3.485-O.D. For 2N, 9N. Comes in qty of 2. (Part No: D6NN4251A) $18.54 [Enlarge Picture] Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-seal fits over top of sweat collar. (Part No: SS92) $12.42 [Enlarge Picture] Ring Gear & Pinion Set - 16:1 ratio. For Models: 2000 & 3000 1965-12 1973 Less 10 Sp. trans. & transmission brake. Additional $20 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN4209G) $300.71 [Enlarge Picture] Ring Gear, MFWD Planetary - For models TW5, TW15, 8530, 8630 all APL355.Repalces 83943737, 83958508, ZP4472354122. (Part No: ZP4472354201) $555.76 [Enlarge Picture] Seal Pair - Oil Seal, outer, rear axle shaft. For plain axle shaft w sweat collar. For tractors~ 600, 700, 800, 900, 2120, 4120. 2.500-I.D. 3.500-O.D. For 2120, 4120, 600, 700, 800, 900 (Part No: D5NN4115B-PAIR) $13.64 [Enlarge Picture] Seal Pair - Oil Seal, inner, rear axle shaft. 2 3 4 OD, 2 1 8 ID. For Models: 600, 800, 2120, 4120. (Part No: C4NN4233A-PAIR) $10.26 [Enlarge Picture] Seal Pair, Rear Axle Oil, Inner - Oil Seal, inner, rear axle shaft. For Models: 700, 900. For 700, 900. (Part No: NCB4233A-PAIR) $16.18 Select-O-Speed Control Selector - For Models: 611, 671, 681, 771, 811, 871, 881, 971, 1811, 1871, 1881, (2000, 4000 4 cylinder), 2111, 4121 all 1959 and up with Select-O-Speed. (Part No: C0NN7202B) $47.50 [Enlarge Picture] Shaft, Sun Gear - For models 8530, 8630, TW15, TW5 ALL W APL355.Replaces 83943736. (Part No: ZP0769126312) $288.78 [Enlarge Picture] Sherman Transmission External Lever - Step Up Step Down lever. For Models: 2N, 8N, 9N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 with Sherman trans. (Part No: 10A909) $47.50 [Enlarge Picture] Shift Cover Assembly - 6 8 Speed w Dipstick Hole. Fits 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Includes Cover, Cover Gasket, Levers, Lever Knobs and Lever Boots and dipstick. (Part No: S.60009-Kit) $115.95 [Enlarge Picture] Shift Knob - For Models: Dexta, Super Dexta, (Major from 8 1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. (Part No: C5NN7213A) $4.09 [Enlarge Picture] Shift Knob - 3 8" NF thread. For Models: 2000, 3000, 4000, 5000, Dexta. (Part No: 957E7213A) $4.95 [Enlarge Picture] Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 s n 252844 & up). (Part No: BB7213A) $4.54 [Enlarge Picture] Shifter Assembly - For Models: 2000, 3000, 4000, with 6 & 8 Speed Transmission from 10 1966 to 1975. Complete Shift Cover Assembly includes Cover, Levers, Shifter Knobs, Shifter Boots, and Cover Gasket. (Part No: S.66211-LG) $175.27 [Enlarge Picture] Shifter Boot - Transmission gear shift lever boot. For tractors: 8N, NAA. Bottom hole in boot is 1-1 2in. (Part No: 8N7277) $7.16 [Enlarge Picture] Shifter Boot - Bottom hole is 7 8in. dia. For 2N, 9N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be use to replace 9N7277. (Part No: C5NN7277C) $2.78 [Enlarge Picture] Shifter Plate - Dexta and Super Dexta Transmission Shifter Plate. (Part No: 957E7222) $68.92 Spider Cross, Differential - For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, DEXTA, SUPER DEXTA. (Part No: E1NN4211AA) $52.92 [Enlarge Picture] Spider Gear - Gear, differential spider. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, DEXTA, MAJOR, SUPER DEXTA, SUPER MAJOR. (Part No: DDN4213B) $41.38 [Enlarge Picture] Thrust Washer, Transmission - 2.16" O.D, 1.75" I.D. For Model: 8N. (Part No: 8N7148) $5.85 [Enlarge Picture] Thrust Washer, Transmission - 2" O.D. For Models: 8N, NAA. (Part No: 8N7149) $9.46 [Enlarge Picture] Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 & 4 Speed Transmissions. For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7120) $42.20 [Enlarge Picture] Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $6.30 [Enlarge Picture] Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $6.88 [Enlarge Picture] Transmission Case to Center Housing Gasket - For Models: 9N, 8N, 2N. (Part No: 9N4662) $1.50 [Enlarge Picture] Transmission Drain Plug - Has 2.5 in. outside diameter. For tractors: 9N, 2N, 8N, NAA, {1939-1954}. Also filler plug for tractor:NAA {1953-1954}. Gasket available as p n 8N7011. Please specify in comments section if needed. (Part No: 9N7010) $7.83 [Enlarge Picture] Transmission Input Shaft w/ Dual Power - 8.78" long. For Models: (5000, 7000 1 1973 and up), 5600, 6600, 6700, 7600, 7700, 5610, 5610S, 6610, 6610S, 6710, 7610, 7610S, 7710, 8010, 6640, 7740, 7840, 8240, TS90, TS100, TS110. (Part No: D2NN7017A) $173.25 [Enlarge Picture] Transmission Mainshaft - 28 28 teeth, 17 spline, 12" long. For Models: 2000, 2110, 2120, 231, 2600, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, Super Dexta. (Part No: 960E7061A) $182.95 [Enlarge Picture] Transmission Oil Cooler - For Models: (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6 1973 and up). (Part No: D3NNH860A) $226.37 [Enlarge Picture] Transmission Oil Cooler - For Models: (233, 333, 335, 532, 2600, 3600 all w cab), 230A, 234, 334, 530A, 2310, 2610, 2810, 2910, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5600, 6600, 7600. (Part No: D4NNH860A) $99.00 [Enlarge Picture] Transmission Oil Pump - For Models: 550, 555, 555A, 555B, 655, 655A, (340, 340A, 340B, 445, 445A, 450, 540, 540A, 540B, 545, 545A ALL WITH POWER REVERSE TRANSMISSION), (3000 series, 3500, 3550, 4000 series, 4410, 4500 ALL 1 1 1965 & Newer), (420, 532, 535 ALL 1 1 1975 & newer), 455 (7 1987 to 11 88), w power reverse trans. (Part No: 86516596) $430.81 [Enlarge Picture] Transmission Rebuild Kit - For Models: 9N, 2N and 8N with 3 & 4 speed transmissions (1939-52). This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK3952) $94.85 [Enlarge Picture] Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK5354) $104.71 [Enlarge Picture] Transmission Rebuild Kit - For 600, 700, 800, 900 Series, 2000, 4000 using 4-speed transmissions (1955-1964). This transmission bearing and seal kit contains seals, Timken bearings and gaskets required for transmission rebuild. (Part No: TSBK5564) $112.39 [Enlarge Picture] U-Bolt - U-bolts. For 2910, 3910, 4110, 4610 (Part No: F-UBOLT) $15.92   Electrical System (Starters, Generators, Coils, Wiring, etc.) 12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. ``Does not contain coil. (Part No: NAA10300ALT) $133.65 [Enlarge Picture] 12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. Not for Industrial or Diesel Tractors. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil and does NOT have tach drive. (Part No: 5564-10300ALT) $133.65 [Enlarge Picture] 12 Volt Conversion Kit - For Models: 2000, 3000, 4000, 5000, 7000. 1965 and up , gas and diesel. Converts 6-volt systems to 12-volt and updates older 12 volt tractors- Replaces Lucas Generator Includes rebuilt unicharge alternator with pulley and internal self exciting regulator, brackets, wiring harness and instructions. Includes tach drive. (Part No: 6X10300ALTH) $313.81 [Enlarge Picture] 12 Volt Conversion Kit, Front Mount Distributor - 9N, 2N, 8N - Updates older 6-volt tractors to 12-volt charging system. For early 9N, 2N, 8N 1948-1951 with front mount distributor (distributor is right behind radiator), to S N 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. (Part No: 8NE10300ALT-C) $133.65 [Enlarge Picture] 12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is to be used if you use your 6 volt coil - OR you can install a 12 volt coil (no coils included in kit) and NOT use this resistor, wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts Nuts Instructions. (Part No: 8NL10300ALT) $133.72 [Enlarge Picture] Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR) $0.00 Alternator - 12 volt, 37 amp. For Models: 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 & 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O. (Part No: D5NN10300E) $144.13 Alternator - 12 volt, 90 amp. For Models: (FW20 1977-82 w Cummins 8-555), (FW30 1977-82 w Cummins 8-903), (FW40 1977-79 w Cummins 8-903), (FW60 1977-82 w Cummins 8-903), (1156 1988-92 w Cummins dsl). All Delco equipped. Replaces 1117732. (Part No: ADR0013) $270.60 [Enlarge Picture] Alternator - 12 volt, 72 amp. For Models: (TW5 1983-89), (TW10 1979-83), (TW15 1983-89), (TW20 1979-83), (TW25 1979-83), (TW35 1979-89), (8600, 9600 1972-76), (8700, 9700 1977-79). All w 6-401 diesel and Motorola alternator. Repalces 8MA2014P. (Part No: AMO0022) $329.93 [Enlarge Picture] Alternator - 12 volt, 105 amp. For Models: (276 1986-92 w 4-239 dsl), (9030 1990-98 w 4-268 dsl). Replaces 1105609, 1105539. (Part No: ADR0195) $125.53 [Enlarge Picture] Alternator - 12 volt, 51 amp. For Models: (2310 1982-85 w 3-158 dsl), (2600 1975-81 w 3-158 dsl), (2610 1982-83 w 3-175 dsl), (2810 1983-89 w 3-158 dsl), (2910 1983-89 w 3-175 dsl), (3600 1975-81 w 3-175 dsl), (3610 1982-83 w 3-192 dsl), (3910 1983-90 w 3-192 dsl), (4100 1975-81 w 3-183 dsl), (4110 1977-83 w 3-201 dsl), (4600, 1975-81 w 3-201 dsl), (4610, 1981-85 w 3-201 dsl), (5600 1975-81 w 4-233 dsl), (5610 1981-85 w 4.256 dsl), (5900 1985-93 w 4-256 dsl), (6600 1975-81 w 4-256 dsl), (6610 1982-85 w 4-268 dsl), (6700 1975-81 w 4-256 dsl), (6710 1982-85 w 4-256 dsl), (7600 1975-81 w 4-256 dsl), (7610 1982-86 w 4-268 dsl), (7700 1975-81 w 4-256 dsl), (7710 1982-85 w 4-268 dsl), (8600, 9600 1972-76 w 6-401 dsl), (8700, 9700 1977-79w 6-401 dsl). Replaces 8AL2056K, D5NN10300A, D3NN10300A. (Part No: D5NN10300D) $124.80 [Enlarge Picture] Alternator - 12 volt, 70 amp. For Models: (3230 1990-95 w 3-192 dsl), (3430 1990-98 w 3-192 dsl), (3930 1990-96 w 3-201 dsl), (4630 1989-96 w 3-201 dsl), (5030 1992-96 w 4-256 dsl), (5610 1986-92 w 4-256 dsl), (5640 1992-93 w 4-268 dsl), (6610 1986-92 w 4-268 dsl), (6640 1992-93 w 4-304 dsl), (7610 1987-91 w 4-268 dsl), (7710 1986-87 w 4-268 dsl), (7740 1992-93 w 4-304 dsl), (7840 1992-93 w 6-401 dsl), (8240 1992-93 6-456 dsl), (8340 1992-93 w 6-456 dsl). All Marelli equipped. Replaces 63324274, 63324273. (Part No: ALU0007) $112.33 [Enlarge Picture] Alternator - 12 volt, 100 amp. For Models: (5640SLE 1994-97 w 4-268 dsl), (6640SLE, 7740SLE 1994-97 w 4-304 dsl), (7840SLE 1994-97 w 6-401 dsl), (8160 1996-98 w 6-456 dsl), (8240SLE, 8340SLE 1994-97 w 6-456 dsl), (8260, 8360, 8560 1996-98 w 6-456 dsl). All Marreli equipped. Replaces 63321285. (Part No: ALU0008) $199.48 [Enlarge Picture] Alternator - 12 volt, 130 amp. For Models: (8670, 8770, 8870, 8970 1993-98 w 6-456 dsl), (9280 1994-96 w 6-611 dsl), (9680, 9880 1994-96 w 6-855 dsl). Replaces 19010178. (Part No: ADR0046) $138.73 [Enlarge Picture] Alternator - 12 volt, 100 amp. For Models: 8160, 8260, 8360, 8560. Replaces 82002329. (Part No: 82010243) $290.33 [Enlarge Picture] Alternator - 12 volt, 40 amp. For Models: 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1920, 1925, (2120 1987-2002), 3415, L465, L554, L565, LS140, LS150, LS170, (LX465, LX485, LX565, LX665 1994-1999 w 843 or 844 New Holland engine), TC25, TC25D, TC29, TC29D, TC29DA, TC30, TC33, TC33D, TC33DA, TC35, TC35D, TC35DA, TC40, TC40D, TC40DA, TC45, TC45D, TC45DA. Replaces SBA185046201, SBA185046200. (Part No: SBA185046320) $151.93 [Enlarge Picture] Alternator Adjustable Arm - Alternator adjusting arm. For alternator conversion on the following tractors (1953-1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303) $19.99 [Enlarge Picture] Alternator Adjustable Arm - Alternator adjusting arm. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10304) $19.95 [Enlarge Picture] Alternator Adjustable Arm - Alternator adjusting arm. For 8N Late with Side Mount Distributor. (Part No: 8NL10304) $24.95 [Enlarge Picture] Alternator Base Bracket Kit - Universal - UNIVERSAL BASE BRACKET MOUNTING KIT. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. Can be used with our 8NE10305SE Alternator. (Part No: 2348258) $45.94 [Enlarge Picture] Alternator Base Bracket - Alternator Base Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10303) $19.95 [Enlarge Picture] Alternator Base Bracket - Base alternator bracket. For 8N Late using side mount distributors. (Part No: 8NL10303) $24.95 [Enlarge Picture] Alternator Base Bracket Kit - Universal - UNIVERSAL BASE BRACKET MOUNTING KIT. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $45.94 [Enlarge Picture] Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: NAA10302) $27.99 [Enlarge Picture] Alternator New - Alternator assembly, 70 amp. For 250C, 260C, 3230, 3430, 345C, 345D, 3930, 4130, 445C, 445D, 455C, 455D, 4639, 4830, 5030, 545C, 545D, 555C, 555D, 5610S, 575D, 655C, 655D, 6610S, 675D, 7010S, 7610S, 7810S, 8010, (Part No: E7NN10B376BB) $150.41 [Enlarge Picture] Alternator New - Alternator assembly, 65 amp. For Models: 555E, 575E, 655E, 655, 675E, 775. (Part No: 87800219) $109.90 [Enlarge Picture] Alternator New Lucas With Pulley - New Lucas alternator assembly, 12-volt, 45 amp with pulley and fan. For industrials: LS190, LX985~ tractors: 5640, 6640, 7740, 7840, 8240, 8340. For 5640, 6640, 7740, 7840, 8240, 8340, LS190, LX985, (Part No: 82001260) $168.88 [Enlarge Picture] Alternator Top Bracket - Alternator Top Mounting Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10302) $19.95 [Enlarge Picture] Alternator Top Bracket - Top alternator bracket. For 8N late with side mount distributor. (Part No: 8NL10302) $24.95 [Enlarge Picture] Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire 'self exciting' alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE) $87.73 [Enlarge Picture] Alternator, Remanufactured - Unicharge alternator w pulley, internal self exciting regulator. For 2000, 4000, 600, 700, 800, 900. No core. (Part No: 5564-10305SE) $95.30 [Enlarge Picture] BACK UP ALARM - Universal - Alarm, electronic back up H.D. triple function sound level. 97, 107, & 112 decibels, 12-36 volt systems. Meets SAE J994 type A, B, & C specifications, 6" (152mm) mounting centers. Width: 7.2" (183mm), height: 4" (102mm), Depth 4" (102mm). (Part No: BA112) $147.90 [Enlarge Picture] BLOWER MOTOR - NEW HOLLAND: Blower motor only, original Fasco replacement motor, 12 volt single speed 2 wire motor with 5 16" shafts. TM115, TM120, TM125, TM130, TM135, TM140, TM150, TM155, TM165, TM175, TM190, TS90, TS100, TS110, TS115, 8160, 8240, 8260, 8340, 8360, 8560, 5640, 6640, 7740, 7840. (Part No: 81870361) $127.44 [Enlarge Picture] Battery Cable - Battery cable less boot, 38" long, battery to relay, 2 gauge. For Models: 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5200, 5600, 5610, 6600, 6610, 7000, 7610. (Part No: D2NN14300C) $19.90 [Enlarge Picture] Battery Cable - Battery cable, 34", battery to ground. For 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4600, 4610, 5000, 5110, 5600, 5610, 5910, 6410, 6600, 6610, 6810, 7600. (Part No: C7NN14301C) $15.83 [Enlarge Picture] Battery Cable - Cable, battery to starter switch, 12-volt, 13-1\2. For Models: 2000, 4000, 501, 601, 701, 801, 901. (Part No: D1NN14300F) $7.99 [Enlarge Picture] Battery Cable - Switch to starter cable, 14-1\2 inches long. For 600, 700, 800, 900, NAA. Replaces FAA14431B. (Part No: 9N14431B) $10.59 [Enlarge Picture] Battery Cable - For models 2N, 9N (from 1940). This cable is a battery to starter and is 21 inches long. (Part No: 9N14300C) $11.24 [Enlarge Picture] Battery Cable - For 2N, 8N, 9N. Ground Strap. 7" long. (Part No: D1NN14301H) $7.86 [Enlarge Picture] Battery Cable - For 8N 1948-52, Jubilee, (NAA, 600, 700, 800, 900, all 1953 and later. Ground Strap. 6 volt, 11" long. (Part No: FAE14301B) $8.91 [Enlarge Picture] Battery Cable - For (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. 12.5" long. (Part No: D1NN14301G) $5.85 [Enlarge Picture] Battery Cable - For (600, 700, 800, 900), (2000, 4000 before 1964). Starter to Battery Cable. 12 Volt, 17" Long. (Part No: 311228) $7.28 [Enlarge Picture] Battery Cable - For NAA, Jubilee, 600, 700, 800, 900, all 1953 and up. Cable. 9" long. (Part No: D1NN14300G) $6.99 [Enlarge Picture] Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A) $12.95 [Enlarge Picture] Battery Hold Down - Used with batteries 16-1 4" long x 7-5 8" wide. For Models: (501, 601, 701, 801, 901 all w 4 cylinder engines from 1958 and up w 12 volt systems). (Part No: 311099) $13.13 [Enlarge Picture] Battery to Starter Cable - For Model: 8N, 1939-1952. Starter to Battery Cable. 10.5" Long, 1Gauge, 7 16 Diameter. (Part No: 8N14300B) $10.50 [Enlarge Picture] Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For 2N, 8N, 9N (Part No: E27N10094B) $5.53 [Enlarge Picture] Blower motor assembly - Blower motor assembly complete, 12-volt, "NEW". Mounting base length 14-3 4", mounting base width 6-1 2", overall width 7-3 4", overall height 7". Tractors: TG215, TG245, TG275, TG305, TJ280, TJ330, TJ275, TJ325, TJ375, TJ380, TJ430, TJ500, TJ530, TJ480, T8010, T8020, T8030, T8040, T8050, T9020, T9030, T9040, T9050, T9060, TG210, TG230, TG255, TG285. (Part No: 84222524) $253.19 Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A) $50.00 [Enlarge Picture] Clip - Clip (electrical wiring to instrument panel brace) 17 32". 1 required. Tractors: 8N (1948-1950). (Part No: 8M14197) $3.55 [Enlarge Picture] Clip - Clip for 7 16" hole. Electric wiring to instrument panel support bracket 1948-1952 1 required, Main wiring assembly to instrument panel brace 1 required, Wiring to hood top reinforcement 1950-1952 3 required. For Model: 8N (1948-1952). (Part No: 51C14197) $3.55 [Enlarge Picture] Clip - Clip for 17 32" hole. Electrical wiring to instrument panel brace 1 required. For Model: 8N. (Part No: 8N14197) $3.55 [Enlarge Picture] Coil - Six Volt - For Models: 8N (1939-1950), 2N, 9N with Front Mount Distributor (Part No: 9N12024) $27.95 [Enlarge Picture] Coil - Twelve Volt - For 9N, 2N, 8N (S N up to 263843. Front Mount Distributor 12 Volts (replaces 9N12024-12V) (Part No: 12VOLTCOIL) $25.95 [Enlarge Picture] Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611) $33.20 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $26.99 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $26.99 [Enlarge Picture] Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $29.95 [Enlarge Picture] Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $29.95 [Enlarge Picture] Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $29.78 [Enlarge Picture] Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $31.95 [Enlarge Picture] Coil, Ignition 12V - Universal coil fits many models. Coil is designed to be used on a 12 volt tractor system using the attached resistor. May be used on a 6 volt system when not using the resistor. (Part No: D5TE12029AB) $15.36 [Enlarge Picture] Coil, Ignition 6V - Standard 6 volt coil. Fits many models. (Part No: D4PE12029AA) $19.95 [Enlarge Picture] Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $34.98 [Enlarge Picture] Condenser - Fits 9N, 2N, 8N with front mount distributor. (Part No: A0NN12300A) $2.95 [Enlarge Picture] Condenser - For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FET12300A) $2.99 [Enlarge Picture] Control Box - For Models: Dexta, Major, Power Major, Super Dexta, Super Major all after S N 957E-58225. 5 CONDUCTORS. (Part No: E27N10505F-Late) $65.47 [Enlarge Picture] Control Box - Control Box - For Models: Dexta & Super Dexta 01 57-10 62, Major 02 60-12 64, Power Major, Super Major all before S\N 957E-58225. 4 CONDUCTORS. Can Replace OEM # 81718302. (Part No: E27N10505F) $38.53 [Enlarge Picture] Control Box - For 2000, 3000, 4000, 5000, 7000. Control Box - 11 Amp. (Part No: C7NN10505D) $34.68 [Enlarge Picture] Distributor - For 8N serial #263844 and up - side mount. (Part No: 8N12127B-WCR) $189.90 [Enlarge Picture] Distributor - With Slotted Drive Shaft. For Models: NAA, Jubilee. (Part No: FAC1212D) $345.00 [Enlarge Picture] Distributor - With 12 Tooth Helican Gear For 600, 700, 800, 900, 2000, 4000 with 4 Cylinder Gas Engine. Comes with points and cap. Replaces 311185. (Part No: FDN12127A) $269.95 [Enlarge Picture] Distributor Dust Cover Assembly - Dust cover assembly for distributor breaker. For 3- and 4-cyl gas engines. Tractors: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 & up). Replaces C5NF12239A. (Part No: C7NF12239A) $16.20 [Enlarge Picture] Distributor Assembly, Complete - For 9N, 2N, (8N all front mount S N up to 263843). Includes: Points, condenser & Distributor Cap. Does not include coil or mounting gaskets. (Part No: 9N12100) $179.90 [Enlarge Picture] Distributor Base Assembly - Front mount distributor base assembly, with clamps & rear bushing. For Models: 2N, 8N, 9N. Does not come with breaker plate. (Part No: 9N12139) $74.95 [Enlarge Picture] Distributor Breaker Plate Retainer Clip - For Models: 9N, 2N, 8N (Front Mounted Distributor). (Part No: 91A12146) $2.80 [Enlarge Picture] Distributor Bushing, FRONT - Front bushing is for FRONT MOUNT DISTRIBUTOR only. **MINIMUM ORDER QTY IS 2 price each **. For 9N, 2N, early 8N. (Part No: 9N12120) $2.12 [Enlarge Picture] Distributor Bushing, REAR - Bushing, (rear), for front mount distributor, 9N, 2N, 8N. MINIMUM ORDER QTY IS 2 price each. (Part No: 18-12132) $3.54 [Enlarge Picture] Distributor Cam and Weight Assembly - Cam and weight assembly for 8N12127B-WCR original style Side-mounted distributor. For use on models 8N after s n 263844, 1950 thru 1952. (Part No: 8N12176) $73.89 [Enlarge Picture] Distributor Cap - Distributor cap for 3-cylinder engine on: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Part No: C5NF12106A) $9.54 [Enlarge Picture] Distributor Cap - For Models: 9N, 2N, 8N to #263843 all with front mount distributor. Distributor Cap. (Part No: 9N12106C) $10.70 [Enlarge Picture] Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 2N, 9N, 8N with front mount distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM) $17.62 [Enlarge Picture] Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite)replacement distributors (Through January 1987)for Late 8N with side mount distributor. (Part No: IBK1009) $14.51 [Enlarge Picture] Distributor Cap, Clip Held - Fits Tractors: 8N S N 263844(Side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder) (Part No: NCA12106A) $6.90 [Enlarge Picture] Distributor Clip Kit - For Models: 9N, 2N, 8N (Early). (Part No: 9N12144) $4.30 [Enlarge Picture] Distributor Coil Bail - For Models: 9N, 2N, 8N w front mount distributor. (Part No: 9N12137) $2.80 [Enlarge Picture] Distributor Drive Gear - For Models: 8N (early), 2N, 9N. Gear for Distributor Drive (front mount distributor). (Part No: 7RA6255) $18.62 [Enlarge Picture] Distributor Driven Gear - For Model: NAA, Jubilee. (Part No: FAD12390A) $42.75 Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (Part No: FAA12239A) $7.78 [Enlarge Picture] Distributor Gasket Kit - For models 9N, 2N, 8N prior to s\n 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104) $2.32 [Enlarge Picture] Distributor Point Set - Point set, Blue Streak premium quality. For Models: 9N, 2N, 8N (Early). (Part No: A0NN12107ABS) $24.27 [Enlarge Picture] Distributor Point Set, 4-Cylinder - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: D8NN12171AA) $4.25 [Enlarge Picture] Distributor Rotor - Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGP1016D) $11.66 [Enlarge Picture] Distributor Rotor, Front Mount Distributor - Fits 9N, 2N, 8N with front mount distributor. (Part No: B2NN12200A) $4.48 [Enlarge Picture] Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N w side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A) $2.85 [Enlarge Picture] Distributor Shaft Assembly - Distributor shaft assembly. For use on models 8N after s n 263844, 1950 thru 1952. Drilling is required to install distributor gear. (Part No: 8N12175) $69.05 [Enlarge Picture] Distributor Shaft, Cam and Weights Assembly - Distributor shaft with cam and weights attached for 9N12100 front mounted distributor. For use on Ford tractor models 9N, 2N, and 8N before s n 263843, 1939 to 1950. (Part No: 9N12187) $69.95 [Enlarge Picture] Distributor, Breaker Plate - 4 Cylinder. Breaker plate with points & condensor. For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FAD12152A) $27.87 [Enlarge Picture] Distributor, Breaker Plate - Breaker assy, complete with points. For 2N, 8N, 9N. For front mount distributor. (Part No: 9N12150) $40.25 [Enlarge Picture] Electronic Ignition Conversion Kit , High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For Models: 630, 640 both w Ford 300 6 cylinder engine. (Part No: 91261) $93.57 [Enlarge Picture] Electronic Ignition Conversion Kit - 12V Neg (3 cyl eng) - Pertronix Electronic Ignition kit for the following tractors using 3-cylinder gas engine: 2000, 2100, 2110, 3100, 3400, 4000, 4100, 4140, 4200. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1231) $81.62 [Enlarge Picture] Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor) , NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A) $73.27 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6) $80.83 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $80.83 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $80.83 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit - For 2N, 9N, 8N with FRONT mount distributor only.For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Part No: 1247P6) $98.51 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1247XTP6) $167.95 [Enlarge Picture] Electronic Ignition Conversion Kit -12V Negative Ground - Electronic Ignition Conversion Kit by Pertronix. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For Models: 5000, 5100, 5200, 6000, 6600. (Part No: 1249) $83.20 [Enlarge Picture] Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT) $159.12 [Enlarge Picture] Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247) $90.93 [Enlarge Picture] Fuse Box Assembly - For Models: (2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100 all 8 1970 and up w o hazard warning indicators), (4330, 4340, 5000, 5100, 5340, 7000 all 8 1970 and up w o cab or hazard warning ind.), (3110 5 1973 and up w o cab or hazard warning ind.), (4140 5 1973 and up w o hazard warning ind.) Replaces C9NN14N030B. (Part No: D2NN14N030A) $26.68 [Enlarge Picture] Generator Brush - For 6 volt generators on models: 600, 700, 800, 900, NAA. (Part No: FAA10069A) $9.08 Generator Cut Out Assembly - Cut out assembly. For 2N, 9N, (Part No: B0NN10505A) $21.74 [Enlarge Picture] Generator, Pulley - For Models: 1965-75 2000, 3000, 4000, 5000, Gas and Diesal, 1968 All 8000, 9000 series (up to Dec\1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Fits generator C7NN10000C. (Part No: C5NF10196B) $25.56 Generator, 12 Volt - For models (2000, 3000, 4000, all after 1965 gas or DSL engines), (620, 8000 both 1968-75 with DSL engines), 9000 1968-1975 with DSL engine. (Part No: C9NN10000A) $99.90 [Enlarge Picture] Generator, 12 Volt - 11 amp. For Models: Dexta, Super Dexta, Major, Power Major, Super Major. Replaces Ford New Holland:81806433, ADN10001, E27N10000, Fordson: E1ADN10001, Perkins: 2871182. (Part No: E1ADN1001) $113.11 [Enlarge Picture] Generator, 6 Volt - New generator with pulley for 2N, 9N, 8N, (2000, 3000, 4000 prior to 1965). Single terminal, 6 Volt. (Part No: 8N10000) $119.00 [Enlarge Picture] Generator, 6 Volt - Remanufactured, Round, 3 wire, keyed shaft. For Model: Late 8N (SN 8N263843 or later) 1950-1952. Pulley NOT included. Please Call for Availability. (Part No: 8N10001) $215.68 [Enlarge Picture] Generator, 6 Volt - Remaufactured, 2 wire, threaded shaft w pulley. For Model 8N 1947-48. (Part No: 8N10000A) $187.91 Generator, 6 Volt - For Models: 9N, 2N, 8N 1939-1950. Remanufactured Generator. Pulley NOT included 4 3 4" O.D. housing, 2 brush, 3 terminal, keyed shaft. Refundable $51.00 core charge will be added to your order. IF ORDERING ON-LINE, ``THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces OEM # 8N10000B. (Part No: 8N10000BR) $249.23 [Enlarge Picture] Generator, Less Pulley & Tach Drive - New Generator 12V, 22 amp - 1965-75 2000, 3000, 4000, 5000, Gas and Diesel, (620, 622 1967-74), (7000 1971-75 w 4-256), 1968 All 8000, 9000 series (up to Dec 1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley & tach drive. Pulley is available (see p n C5NF10196B). Tach Drive available (see part #C5NF17B282B). Replaces Lucas 22756. (Part No: C7NN10000C) $79.00 [Enlarge Picture] Glow Plug - Fits Dexta, Super Dexta. (Part No: E197CQ9) $49.99 [Enlarge Picture] Glow Plug - A=3.37", B=.87", C=1.50", D=M10 x 1.25". For Models: 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1320, 1510, 1530, 1620, 1630, 1710, 1715, 1720, 1725, 1900, 1910, 1925, 2110, 3415. (Part No: SBA185366060) $17.84 [Enlarge Picture] Glow Plug - For Models: 1000, 1500, 1600, 1700. (Part No: SBA185366010) $30.00 [Enlarge Picture] Ignition Kit - Ignition kit, less rotor. Contains points, gauge, and condenser for Front Mount Distributor. For 2N, 8N, 9N (Part No: ATK6FF) $9.67 [Enlarge Picture] Ignition Kit - 4 Cylinder - Ignition kit, less rotor. Contains points, gauge, and condenser. For models 1950 to 1964. For 2000, 4000, 600, 6000, 6100, 700, 800, 8N (late), 900, NAA (Part No: ATK7FA) $7.98 [Enlarge Picture] Ignition Kit With Rotor - Ignition kit with standard points, condenser and rotor for Front Mounted Distributor. For 2N, 8N, 9N. (Part No: ATK6FFR) $13.94 [Enlarge Picture] Ignition Kit With Rotor - 3 Cylinder - Ignition kit contains points, condenser, rotor. For Models: (2000, 3000, 4000 from 1965 and up), (2600, 3600, 4100, 4600 from 1975 and up). (Part No: ATK6FXR) $13.95 [Enlarge Picture] Ignition Kit With Rotor - 4 Cylinder - Ignition kit contains: points, rotor, condensor. For 8N (LATE - w side mounted distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. For models from 1950 to 1964 (4 Cylinder). Also for TISCO 8N12127-WCR distribution. (Part No: ATK7FAR) $9.98 [Enlarge Picture] Ignition Kit With Rotor, Front Mount Distributor - Premium quality Blue Streak points (A0NN12107ABS), rotor, condenser, and gauge For 2N, Early 8N, 9N. (Part No: APN12000ABSR) $27.21 [Enlarge Picture] Ignition Switch w/ Key - For Models: (3830 Orchard), (4330 Vineyard), (4430 Orchard), TN65F, TN75F, TN90F. (Part No: 5146155) $26.93 [Enlarge Picture] Ignition Switch, Keyed - For Models: Gas and Diesel (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10\1985. For TW5-TW35 to 5\1983-2\1990. 8530-8830 3\1990 and up. Starter and Heat Ignition Switch for tractors without cold start. (Part No: D3NN11N572A) $27.66 [Enlarge Picture] Ignition Switch, Keyed - For Models: (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10 1985. For TW5-TW35 to 5 1983-2 1990. 8530-8830 3 1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Replaces OEM C5NN11N572A, D5NN11N572A, E8NN11N501AA. (Part No: E7NN11N501AB) $19.20 [Enlarge Picture] Ignition Switch, Keyed - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) $9.95 [Enlarge Picture] Ignition Switch, w/ Keys - For Models: 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA385200331) $53.19 [Enlarge Picture] Ignition Tune Kit - Include spark plugs, points, condenser, and Rotor (4 cylinder). For Models: 5000, 6600, 5500, 5550. (Part No: S.66450) $28.74 [Enlarge Picture] Ignition Tune Up Kit, Basic, 3-Cylinder Gas - For 1965 & up: 2000, 3000, 4000. 1975 & up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cu. in. GAS. Tune Up Kit, contains Point Set, Condenser, Rotor and (3) Autolite 405 Spark Plugs. (Part No: 309788) $19.95 [Enlarge Picture] Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For Models: NAA, NAB, Jubilee, 8N w side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787) $18.48 [Enlarge Picture] Ignition Tune Up Kit, Complete, 3-Cylinder - Fits original Motorcraft distributor. Kit includes, points, condenser, rotor, dust cover, dust cover o-ring, distributor cap, custom fit spark plug wires, 3 autolite 405 spark plugs. For Models: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. 3 cylinder models only. (Part No: S.66642) $55.37 [Enlarge Picture] Ignition Tune Up Kit, Comprehensive - For 8N (S N 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 , 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT) $34.47 [Enlarge Picture] Ignition Tune Up Kit, Front Mount Distributor - For Models: 2N, 8N, 9N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: Point set, Condenser, Rotor & (4) 437 Autolite Spark Plugs and gaskets. (Part No: 309786) $21.72 [Enlarge Picture] Ignition Tune-Up Kit And Maintenance Kit - Comprehensive kit For 9N, 2N, 8N, using front mount distributors to S\N 263843. Complete Tune-Up and maintenance Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs, oil filter, Fuel Sediment Bowl Assy, and Fuel Filter, In-Line, 5\16 inch . Note: If your 8N has an angle mounted distributor refer to part #TUNEMAINT8N instead. (Part No: 2N9NTUNEMAINT) $63.94 [Enlarge Picture] Ignition Tune-Up Kit And Maintenance Kit - For 8N (S\N 263844 & up)(4 Cylinder Gas Engine). Comprehensive Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, Spark plugs, Oil Filter APN6731B, Fuel Sediment Bowl Assy, and Fuel Filter, In-Line, 5\16 inch . (Part No: TUNEKITMAINT8N) $51.99 [Enlarge Picture] Ignition Tune-Up Kit, Front Mount Distributor - For 9N, 2N, 8N, using front mount distributors to S N 263843. Complete Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs. Note: If your 8N has an angle mounted distributor refer to #TUNEkit instead. (Part No: 2N9NTUNEKIT) $39.99 [Enlarge Picture] Manifold Heater - Thermostart Intake Manifold Heater. Diesel cold weather starting aid. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710, (Part No: C5NE9A436A) $23.95 [Enlarge Picture] Pertronix Distributor Cap - Pertronix Distributor Cap for 2N, 9N, 8N with front mount distributor that has been converted to Electronic Ignition using kit 1247XT. (Part No: 1247XTCAP) $27.95 [Enlarge Picture] Point Set - Point set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGS2224LB) $8.24 [Enlarge Picture] Pre Heater Switch - For models Dexta, Super Dexta. (Part No: E176NE9) $30.91 [Enlarge Picture] Pulley Alternator , Wide - For use with our 12 Volt Conversion kits that use the 10SI style alternator only. .670 inch Bore, 2.5 inch outside diameter, using a 5 8 inch wide belt. Replaces the narrower pulley (3 8ths aprox)on tractors with a wider crankshaft pulley (3 4 inch). (Part No: AFD5035) $13.99 [Enlarge Picture] Pulley Generator - Fits 8N (Keyway). Shaft hole is approx 0.67in (approx 11 16). Pulley O.D. approx 3-5 8in, I.D. approx. 2 5 16in. X 5 8 wide. (Part No: 8N10130A) $41.78 [Enlarge Picture] Pulley Generator - Generator pulley (threaded). For 2N, 8N, 9N, (Part No: 9N10130B) $29.99 [Enlarge Picture] Relay - Switch, Relay for headlamp wiring harness. For tractors~ E series backhoe 3010S, 4010S, 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150. For 3010S, 4010S, 8160, 8260, 8360, 8560, TM115, TM125, TM135, TM150 (Part No: 82003697) $10.50 Resistor - For 2N, 9N, 8N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in ignition system, resistance = 3.0 ohms. (Part No: 8NE10306) $4.95 [Enlarge Picture] Resistor Assembly - For Models 8N to s n 263844. Resistor measures .6 ohms + - .1 (Part No: A8NN12250A) $21.95 [Enlarge Picture] Resistor Assembly, Ignition Coil - For Models 9N, 2N. Resistor measures .5 ohms. (Part No: A8NN12250B) $21.95 [Enlarge Picture] Rotor Clip - For Models: (8N s n 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with side mounted distributor. (Part No: 8N12213) $4.15 [Enlarge Picture] Rubber Grommet - Rubber grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605) $2.38 [Enlarge Picture] STARTER SWITCH - Ignition switch assembly, Starter Heater. Tractors: 5640, 6640, 7740, 7840, 8160, 8240, 8340, 8360, 8560, TM115, TM125, TM135, TM150, TM165, TS90, TS100, TS110. (Part No: F0NN11N501AA) $49.90 Sarter Solenoid - For Models: 5610, 5900, 6610, 6710, 7610, 7710, 5110, 6410, 6810, 7410. Replaces 3985320. (Part No: E9NN11390BA) $28.42 [Enlarge Picture] Soleniod - Starter solenoid. For FW20, FW30, FW40, FW60, (Part No: 1119879) $49.90 Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $2.62 Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $2.62 Spark Plug - For 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437) $2.06 [Enlarge Picture] Spark Plug Set (3) - Price shown is for (1) plug - your cost will be x3 (3-plugs). For 3 cylinder engines For 1965 & up: 2000, 3000, 4000. 1975 & up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cu. in. GAS. SET OF 3 SPARK PLUGS. (Part No: AL405) $3.72 [Enlarge Picture] Spark Plug Set (4) - 4 Cylinder Engines For 1965 & up: 2000, 3000, 4000. 1975 & up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cu. in. GAS. SET OF 4 SPARK PLUGS.(price shown is for EACH, minimum Qty is 4. (Enter 4 in QTY box. ) (Part No: AL216) $3.10 [Enlarge Picture] Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Part No: 8N12112B) $5.59 [Enlarge Picture] Spark Plug Wire Bracket - ****SOLD IN MULTIPLE OF 2, PRICE SHOWN IS PER BRACKET**** For models 9N, 2N, 8N, (1939 to 1950).``****SOLD IN MULTIPLE OF 2, PRICE SHOWN IS PER BRACKET**** (Part No: 9N14564) $5.43 [Enlarge Picture] Spark Plug Wire Set - 3 Cylinder, Custom - Premium quality leads have OEM style boots and are custom cut length for 3-cylinder gas engines (1965 & newer) on: 2000, 2600, 3000, 3600, 3610, 4000, 4600. (Part No: DHPN12259A) $28.42 [Enlarge Picture] Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor high performance electronic ignition conversion kits. (Part No: S.66442) $12.68 [Enlarge Picture] Spark Plug Wire Set, Custom - Premium quality leads fit 8N with side mount distributor. (Part No: 8N12259) $20.20 [Enlarge Picture] Spark Plug Wire Set, Custom, 4 Cyl. - Custom premium quality set fits 4-cylinder gas engines in : NAA, Jubilee, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: CPN12259CUSTOM) $19.40 [Enlarge Picture] Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $19.28 [Enlarge Picture] Spark Plug Wire Set, Universal, 4 Cyl. - For Models: NAA, Jubilee, NAB, 9N, 2N, 8N, 2030, 2120, 2130, 2131, 4030, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: CPN12259) $10.58 [Enlarge Picture] Spark Plug, Bosch - Replaces Autolite AL437, AL82 and Champion H14Y and H18Y. For Models: 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). Price is for EACH. Minimum Order is 4. (Part No: 3000-6000) $3.00 [Enlarge Picture] Spark Plug, Bosch - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. For Models: 1965 & up 2000, 3000, 4000, 1975 & up 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cu. in. gas engines. Price is for EACH, minimum order Qty is 4. (Part No: 3000-6001) $3.00 [Enlarge Picture] Spark Plug, Bosch - Replaces Autolite AL405 plug. Used in 3 cylinder engines. For Models: 1965 & up 2000, 3000, 4000, 1975 & up 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cu. in. GAS. Price shown is for 1, minimum order QTY is 3. (Part No: 3000-6002) $3.00 [Enlarge Picture] Starter - Starter, less drive, special Delco option- DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA, (Part No: C3NF11002RXLD) $117.13 [Enlarge Picture] Starter - Starter, less drive. For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C3NF11002RXL) $143.45 [Enlarge Picture] Starter - For 1320, 1520, 1530, 1620, 1630, 1715, 1720, 1725, 1925, TC27D. (Part No: SBA185086551) $151.93 [Enlarge Picture] Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER) $0.00 Starter - 12 volt, 10 tooth, CW rotation. For Models: TW10, TW20, TW25, TW30, TW35 1979-83 w 6-401, 2000, 3000 1965-75 w 3-158, 2310 1982-85, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 w 3-158, 2910 1983-89 w 3-175, 3000 1965-68 w 3-175, 3230 1990-95 w 3-192, 3430 1990-98 w 3-192, 3610 1982-83 w 3-192, 3910 1983-90 w 3-192, 3930 1990-96 w 3-201, 4000 1965-72 w 3-192 or 3-201, 4100 1978-81 w 3-183, 4110 1977-83 w 3-201, 4630 1989-96 w 3-201, 1990-99 w 3-192 dsl, 5000 1965-76 w 4-256, 5030 1992-96 w 4-256, 5600 1975-81 w 4-256, 5610 1981-92 w 4-256, 5900 1985-93 w 4-256, 6600 1975-81 w 4-256 dsl, 6610 1982-92 w 4-268, 6700 1975-81 w 4-256, 6710 1982-85 w 4-256, 7000, 7100, 7200 1971-75 w 4-256), 7400 1975-76 w 4-256, 7600, 7700 1975-81 w 4-256, 7710 1982-91 w 4-268, 7810 1978-91 w 6-401, 8000 1968-87 w 6-401, 8210 1978-91 w 6-401. All with diesel engines. Replaces 26395, 26211, 26339A. (Part No: SLU0002) $120.25 [Enlarge Picture] Starter - 12 volt, 10 tooth, clockwise rotation. For Models: (231 1975-81 w 3-158 dsl), (233 1975-77 w 3-158 dsl), (250C, 260C 1990-94 w 3 cyl dsl), (333 1975-77 w 3-175 dsl), (335 1975-78 w 3-175 dsl), (340 1979-81 w 3-175 dsl), (340A, 340B 1981-84 w 3-175 dsl), (345C 1989-92 w 3 cyl dsl), (345D 1992-97 3 cyl dsl), (445 1979-83 3-183 dsl), (445A 1984-88 3-183 dsl), (445C 1989-92 w 3-183 dsl), (445D 1992-98 w 3-183 dsl), (515, 531 1975-81 w 3-201 dsl), (535 1975-77 w 3-201 dsl), (540A 1981-84 w 3-201 dsl), (540B 1984-88 w 3-201 dsl), (545 1979-83 3 cyl dsl), (545A 1984-88 w 3 cyl dsl), (545C 1989-92 w 3 cyl dsl), (545D 1992-98 w 3 cyl dsl), (550 1975-78 w 3 cyl dsl), (620, 622 1967-74 gas & dsl). Replaces 26395, 26211, 26339A. (Part No: SLU0002) $120.25 [Enlarge Picture] Starter - 6 volt, clockwise rotation. For models: (NAA 1952-54 w 134 4 cyl. gas), (501, 601 series 1957-62 w 134 4 cyl. gas), (640, 660, 740 1954-57 w 134 4 cyl. gas), (641, 651, 681 1957-62 w 134 4 cyl. gas), (701 series 1962-68 w 134 4 cyl. gas), (801, 901 series 1962-68 172 4 cyl. gas), (841, 851, 881 1957-62 w 172 4 cyl. gas), (850, 860, 960 1954-57 w 172 4 cyl. gas), (4000LCG, 4030, 4040 1961-64 w 3-201 diesel). Replaces FAC11002, C3NF1100D. (Part No: SFD0047) $102.53 [Enlarge Picture] Starter - 12 volt, 9 tooth, clockwise rotation. For Models: (960 1983-86 w 2-43 Shibaura diesel), 1210 1983-86 w 3-53 Shibaura diesel). Replaces 028000-9112. (Part No: SND0456) $149.29 [Enlarge Picture] Starter - 12 volt, 10 tooth, clockwise rotation. For Models: (5610s 1993-96 w 4-268 diesel), (5640 1992-97 w 4-268 diesel), (5640SL, 5640SLE 1994-97 w 4-268 diesel), (6640, 7740 1992-97 w 4-304 diesel), (6640SL, 6640SLE, 7740SL, 7740SLE 1994-97 w 4-304 diesel), (7840 1992-97 w 6-401 diesel), (7840SL, 7840SLE 1994-97 w 6-401 diesel), (8240, 8340 1992-97 w 6-456 diesel), (8240SL, 8240SLE, 8340SL, 8340SLE 1994-97 w 6-456 diesel), (555C 1992 w 3 cyl diesel), (555D 1992-97 w 4-256 diesel), (555E 1996-98 w 4-256 diesel), (575D 1992-97 4-256 diesel), (575E 1996-98 w 4-304 diesel), (655C 1992 w 4-268 diesel), (655D 1992-97 w 4-268 diesel), (655E 1996-97 w 4-304 diesel), (675D 1992-97 w 4-268 diesel), (675E 1996-98 w 4-304 diesel). Replaces 9007044014, 1369015, 1369023. (Part No: SBO0122) $173.05 [Enlarge Picture] Starter - 12 volt, 11 tooth, clockwise rotation. For Model: 1156 1988-92 w Cummins diesel. Replaces 1990468. (Part No: SDR0010) $224.33 [Enlarge Picture] Starter - 12 volt, 11 tooth, Clockwise rotation. For Models: (1920 1988-98 w 4-122 Shibaura diesel), (3415 1993-98 w 4-135 Shibaura diesel). Replaces 228000-2970. (Part No: SND0259) $165.13 [Enlarge Picture] Starter - 12 volt, 10 tooth, Clockwise rotation. For Models: (2000 gas), (2030 1961-64 w 3-158 diesel), (3000 1965-75 w 3-158 diesel), (5000 1965-76 w 4-256 or 4-233 diesel). Replaces C5NF11001B, D0NF11001A. (Part No: SFD0089) $111.24 [Enlarge Picture] Starter - 12 volt, 10 tooth, clockwise rotation. For models: (2810 1983-90 w 3-158 dsl), (2910 1983-89 w 3-175 dsl), (3230 1990-94 w 3-192 dsl), (3430 1990-98 w 3-192 dsl), (3910 1983-89 w 3-192 dsl), (3930 1990-99 w 3-192 dsl), (4130 1990-91 w 3-201 dsl), (5030 1992-98 w 4-256 dsl), (5610, 6610 1982-93 w 4-268 dsl), (7610 1982-92 w 4-304 dsl), (7710 1982-90 w 4-268 dsl), (7810 1980-90 w 6-401 dsl), (8210 1985-91 w 6-401 dsl), (8630 1990-93 w 6-401 dsl), (8730, 8830 1990-93 w 6-401 dsl), (9030 1990-97 w 4-268 dsl). Replaces 26395. (Part No: SLU0002) $120.25 [Enlarge Picture] Starter - 12 volt, 10 tooth, clockwise rotation. For Models: (5030 1992-98 w 4-256 dsl), (5640 1991-98 w 4-268 dsl), (6530HC 1992-97 w 4-268 dsl), (6640 1991-98 w 4-304 dsl), (7740 1991-98 w 4-304 dsl), (7840 1991-96 w 6-401 dsl), (8240, 8340 1992-97 w 6-456 dsl). Replaces 1369023. (Part No: SBO0122) $173.05 Starter - 12 volt, 11 tooth, clockwise rotation. For Models: 1920, (2110 1983-1986), (2120 8 1996-2 99), (3415 7 1993 and up), L465, L565, LS140, LS150, LS170, (LX465 eng. s n 46640 and up 1994-99 W 843 New Holland engine), (LX485 eng. s n 46640 and up 1995-99 W 843H New Holland eng.), (LX565 eng. s n 57422 and up 1994-99 W 844 New Holland eng.), (LX665 eng. s n 57422 and up 1994-99 W 844T New Holland eng.), TC35, TC35D, TC35DA, TC40, TC40D, TC40DA, TC45, TC45D, TC45DA. (Part No: SBA185086530) $198.20 Starter - 12 volt, 10 tooth, clockwise rotation. For models: (8530 1990-93 w 6-401 dsl), (8600 1972-76 w 6-401 dsl), (8700 1977-79 w 6-401 dsl), (8730 1990-93 w 6-401 dsl), (8830 1990-93 w 6-401 dsl), (9000 1970-72 w 6-401 dsl), (9030 1990-98 4-268 dsl), (9600 1972-1976 w 6-401 dsl), (9700 1977-79 w 6-401 dsl), (420 1975-78 w 3-175 dsl), (455 1987-88 w 3 cyl. dsl), (455C 1989-92 w 3-201 dsl), (455D 1992-97 w 3-201 dsl), (555 1978-84 w 3 cyl dsl), (555A 1984-85 w 3 cyl dsl), (555B 1985-88 w 3 cyl dsl), (555C 1989-91 w 4-256 dsl), (650 1975-77 w 4-256 dsl), (655A 1985-88 w 4-256 dsl), (655C 1989-91 w 4-256 dsl), (750 1975-79 w 4 cyl dsl), (755 1979-84 w 4 cyl dsl), (755A 1984-86 w 4 cyl dsl), (5500 1967-73 dsl), (6500, 7500 1973-76), (A62 1974-1984 w 4-256 dsl), (A64, A66 1974-1984 w 6-401). Replaces 26395, 26211, 26338A, 26339A. (Part No: SLU0002) $120.25 Starter - For 4230, 4430, 4835, 5635, 6635, 7635, TL100, TL70, TL80, TL90, TN65F, TN70F, TN75F, TN80F, TN90F, TN95f. Also Replaces 4755109, 4807375, 504059251, 82980757, 99449113. (Part No: 500338952) $151.93 Starter - For Models: 3010S, 3830, 4010S, 4030, 5010S, TN55D, TN55S, TN55, TN65D, TN65S, TN65V, TN65, TN70D, TN70S, TN70, TN75D, TN75S, TN75V, TN75, (Part No: 500338953) $178.20 Starter Assembly, New - 12 volt, 10 teeth, 4-1 2" diameter. For Models: 2000 diesel with Lucas 4-1 2" field case (1965-1991), 3000 diesel (1965-1991), 4000 diesel, 5000 gas or diesel, 6000 diesel, 6600 gas (1975-1978), 7000 diesel (1965-1991). Replaces Lucas# 26137, 26189, 26364, LRS230, Iskra # ISO624. (Part No: D8NN11000CE) $152.42 [Enlarge Picture] Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115) $8.39 [Enlarge Picture] Starter Boot - Rubber cover, starter switch terminal cover. Tractors: 8N, NAA {1948-1954}. (Part No: 8N11113) $5.25 [Enlarge Picture] Starter Drive - Drive assembly. For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A) $43.73 [Enlarge Picture] Starter Drive - Starter drive assembly. For 2000, 3000, 4000, 5000, (Part No: D2NN11350B) $17.80 [Enlarge Picture] Starter Drive - Starter drive for TISCO's 5" dia. starter replacement for D8NN11000CE. Does not fit Ford's original D8NN11000CE. Will service original 4-1 2" dia. Ford starter D8NN11000DA. For 2000, 230A, 231, 233, 234, 3000, 333, 334, 335, 4000, 530A, (Part No: D2NN11350C) $24.00 [Enlarge Picture] Starter Drive - Starter drive for original Ford & Tisco 5" diameter starter D8NN11000CE. For Models: 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Part No: E4NN11350AA) $35.56 [Enlarge Picture] Starter Drive - Replaces; D2NN11350A, 2701E11005A. For Models: 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Part No: C5NF11005C) $15.90 [Enlarge Picture] Starter Drive - Replaces; D2NN11350A, 2701E11005A. For Models: 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Part No: C5NF11005C) $15.90 [Enlarge Picture] Starter Drive - New improved design starter drive, for 9N, 2N, 8N (1939 to 1952). (Part No: 52-11350C) $36.75 [Enlarge Picture] Starter Drive - Starter drive for original Ford & Tisco 5" diameter starter D8NN11000CE. For Models: 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8530, 8630, 8700, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: E4NN11350AA) $35.56 [Enlarge Picture] Starter Drive - Original Style For 8N, 2N, 9N (Part No: R2325) $30.30 [Enlarge Picture] Starter Gear Reduction - For Models: 2000, 2110LCG, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 340, 3400, 340A, 340B, 3430, 345, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D. Replaces D8NN11000CE. (Part No: S.60353) $341.19 [Enlarge Picture] Starter Gear Reduction - For Models: 450, 4500, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 5500, 555, 5550, 555A, 555B, 555C, 555D, 5600, 5610, 575D, 5900, 650, 6500, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710. Replaces D8NN11000CE. (Part No: S.60353) $341.19 [Enlarge Picture] Starter Gear Reduction - For Models: 675D, 6810, 7000, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, MAJOR, POWER MAJOR, SUPER MAJOR. Replaces D8NN11000CE. (Part No: S.60353) $341.19 [Enlarge Picture] Starter New - NEW Starter assembly. 2 Bolt Mount. For industrials: L454, L455, L553, L555 {1981 to 11-1993}. For L454, L455, L553, L555, (Part No: 503470) $125.53 [Enlarge Picture] Starter New - Starter assembly, Replaces F0NN11000CA & 9821291, 3.1 kw. For 4830, 5030, 555C, 555D, 555E, 5610S, 5640, 575D, 575E, 655C, 655D, 655E, 6610S, 6640, 675D, 675E, 7610S, 7840, 8160, 8240, 8260, 8340, 8360, 8560, L865, L885, LX865, LX885, TS100, TS110, TS90, (Part No: 82005342) $158.43 [Enlarge Picture] Starter Relay Assembly 6-Volt - For NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Relay Assembly, 6 Volt, 3 Terminal. (Part No: NCA11450A) $8.85 [Enlarge Picture] Starter Repair Kit - For 9N, 2N, 8N. Starter Repair Kit contains all parts necessary for repair of starter #8N11001. (Part No: SRK401) $7.99 [Enlarge Picture] Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Part No: SRK403) $15.34 [Enlarge Picture] Starter Safety Switch - Safety starter switch. For 2000, 2100, 3000, 3100, 3400, 3500, 3550, 4000, 420, 445, 4500, 5000, 532, 535, 545 (Part No: C7NN7A247B) $13.72 [Enlarge Picture] Starter Safety Switch - For Models: 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966UP. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 up w manual reversing trans. Ind: 231, 233, 335, 2600, 3600 all with 6 spd 1975 up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU, all 8 spd and 1975 and up. For 5600, 6600, 7600 with 7 & 8 speed and 1975 and up. For 5700, 6700, 7700 with 7 & 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with manual reversing transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. (Part No: C7NN7A247A) $23.16 [Enlarge Picture] Starter Solenoid - Fits Fordson Major, Power Major, Super Major, Dexta, Super Dexta. (Part No: E1ADDN11450C) $29.74 [Enlarge Picture] Starter Solenoid - For (2000, 3000, 4000, all 1965> with 4 1 2" Diameter Starter), (7000 1 71> with 5" Diameter Starter). Starter Relay Assembly. (Part No: D2AF11450AA) $17.80 [Enlarge Picture] Starter Solenoid - For 2000, 3000, 4000, 5000, 3900, 4100, 4600, 5600, 6600, 7700 With 5" Starter (Part No: D7NN11390B) $25.95 [Enlarge Picture] Starter Solenoid - For Starter D8nn11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12 1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (81-83), 2810 (84-90), 2910 (83-90), 3310 (65-74), 4000 series (65-74), 4100 (75-81), 4110 (81-90), 4600 (75-81), 4610 (81-90), 5340 (68-74) 6600 gas 1975-1981, 7000 series (71-74). NOT FOR D8NN11000CE 5" starter. (Part No: D7NN11390A) $19.90 [Enlarge Picture] Starter Solenoid - 6 Volt - For 8N, 1948-1952. Starter Solenoid, 6 Volt. (Part No: 8N11450) $8.98 [Enlarge Picture] Starter Solenoid, 12-Volt - Relay Assembly, 12 Volt, 4 Terminal. For most 12 Volt GAS Models 1958-1964 including: Jubilee, 501, 541, 600, 601, 611, 620, 621, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB, 2000, 2030, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140.Replaces 311007FR. (Part No: 311006) $12.72 [Enlarge Picture] Starter Switch - For 9N SN<12499, 1939-1940. Starter Switch (push type). Replaces: 1996487 Delco, 405C Delco. (Not the same as Triangular 9N11450B 1940-1947) (TIS DR405C) (Part No: 9N11450A) $14.70 [Enlarge Picture] Starter Switch - with mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG) $20.95 [Enlarge Picture] Starter Switch, Restoration Quality - Fits 9N, 2N with Safety Start. (Part No: 9N11450B) $23.24 [Enlarge Picture] Starter w/Drive - 12 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66630) $129.90 [Enlarge Picture] Starter w/Drive, 6 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66619) $138.90 [Enlarge Picture] Starter, 12 Volt - 9 tooth, clockwise rotation. For Models: (1100, 1110 diesel), 1200, 1300. Replaces S114218. (Part No: SBA185086111) $152.88 Starter, 12 Volt, With Drive - New Starter for 9N, 2N, 8N. 12 Volt. Complete starter includes drive mechanism. (Part No: 8N1100R) $139.00 [Enlarge Picture] Starter, 12V - Replacement starter for Dexta & Super Dexta. This starter is new and does NOT look like the original . This starter mounts differently and you must rewire. A push button type starter switch is available for the wiring modification (p n 189158M91). Specify in 'COMMENTS' when ordering, if needed. (Part No: S.60360) $183.09 [Enlarge Picture] Starter, 6 Volt, Less Drive - Starter, less drive. For 2N, 8N, 9N, with 6 volt systems. Restoration quality. (Part No: 8N11001) $99.95 [Enlarge Picture] Starter, 6 Volt, With Drive - New Starter for 9N, 2N, 8N. 6 Volt.Complete starter - includes drive mechanism. Replaces OEM # 8N11001R. (Part No: 8N11001WD) $129.00 [Enlarge Picture] Starter, DIESEL engines - New Starter with drive for most DIESEL engines in models 801 901 series and 2000 thru 8830. 5 inch diameter. Verify part number before ordering. (Part No: D8NN11000CE) $151.93 [Enlarge Picture] Starter, Hitachi - 9 teeth, clockwise rotation, 12 Volt. For Model: 1910. (Part No: SBA185086350) $322.26 Starter, Lucas - 12 volt, 10 teeth, clockwise rotation. For Models: (1100, 1495, 276 w Ford diesel), (1112, 1114, 2100, 2300, 2300A, 231, 2600, 2610, 3110, 3120, 3330, 334, 340, 3400, 340A, 3600, 3610, 3610NO, 4110N, 420, 4200, 4340, 4400, 445, 4500, 4600, 4600NO, 4600SU, 4610, 4610O, 4610SU, 5000, 5100, 515, 5200, 530A, 531, 5340, 535, 540A, 545, 550, 909 diesel), 1118, (2000, 4000 3 cyl. diesel). (Part No: 83981923) $204.29 [Enlarge Picture] Starter, Lucas - 12 volt, 10 teeth, clockwise rotation. For Models: 1118, 233, 250C, 2600N, 2600R, 2600V, 260C, 2810, 2910, 3055, 3100, 3300, 3310, 333, 340B, 3500, 3600N, 3600NO, 3600R, 3600V, 3900, 3910, 3910H, 3910N, 3910R, 4410, 4600O, 5110, 532, 540, 540B, 545A, 545C, 545D, 5600, 5610, 5700, 5900, 6600, 6600C, 6600O, 6610, 6610O, 6700, 6710, 7000, 7100, 7200, 7410. (Part No: 83981923) $204.29 [Enlarge Picture] Starter, Lucas - 12 volt, 10 teeth, clockwise rotation. For models: 7600, 7600C, 7610, 7610O, 7700, 7710, 7810, 7810O, 7910, 8000, (912 4 cyl.), (L783, L785 w loader restraint), 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 910, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, (907 diesel), (4830O, 5030, 5030O 3 1992 and before), (5000, 5100, 5340 gas 6 1971 and up), ( 6410 UK). (Part No: 83981923) $204.29 [Enlarge Picture] Starter, Lucas - 12 volt, 10 teeth, clockwise rotation. For Models: (2110, 2310N, 4100, 4110 1965-1974 diesel), (2150 1970-1974 diesel), (2310 1982-1983 diesel), (256 w Ford eng.), (3000 w 158 diesel), 3150 UK, (3230, 3430, 3930, 3930H, 3930N, 3930NO, 4630, 4630N, 4630NO, 4630O, 4830, 4830N 3 1992 and before), (335 1983-1984), (335 1975-1978 diesel), (4110, 4100 1975-1981 diesel), (4130, 4130N, 4130NO 3 cyl. 3 1992 and before), (4140, 4330 3 cyl diesel 1965-1974). (Part No: 83981923) $204.29 [Enlarge Picture] Starter, New - 12 volt, clockwise rotation, 10 teeth. For Models: 1100 w perkins diesel, 1116, 1495 w perkins diesel, 1496. (Part No: 795152) $132.20 [Enlarge Picture] Starter, New - 12 volt, clockwise rotation, 11 teeth. For Model: 2120 1987 to July 1996. (Part No: SBA185086410) $199.90 [Enlarge Picture] Starter, New - 12 volt, clockwise rotation, 12 teeth, 3 bolt mount. For Models: L553, L555 w perkins engines. (Part No: 9800888) $150.68 [Enlarge Picture] Starter, New - 12 volt, clockwise rotation, 10 teeth. For Models: L779 diesel prior to 1983, L783 and L785 both w perkins engines. (Part No: 9800887) $150.68 [Enlarge Picture] Starter, New - 12 volt, clockwise rotation 11 teeth. For Models: 8360, 846, 8560, 936, 946V, 956, 976V, 1156 w cummins. Replaces, V102746, V90562. (Part No: 9706425) $244.33 [Enlarge Picture] Starter, New - Replaces;685977, F7SZ11002AA. For Models: 1112 gas, 1114 gas, L784. (Part No: E9SZ11002B) $94.92 [Enlarge Picture] Starter, New - For Model: L250. (Part No: 507673) $111.08 [Enlarge Picture] Starter, New - For Model: L600. (Part No: 507461) $124.28 [Enlarge Picture] Starter, New - 12 volt, 9 teeth, clockwise rotation. For Models: 1000, 1500, 1600, 1700. (Part No: SBA185086052) $340.68 Starter, New - For Models: 1710, (1320, 1520, 1620, 1720 all built prior to 1 1991). (Part No: SBA185086291) $358.97 Starter, New - For Models: (4330 Vineyard), (4430 Orchard), (4835, 5635, 6635 up to s n C3868). (Part No: 4807375) $323.17 [Enlarge Picture] Switch, Ignition & Lights - For Models: Dexta, Super Dexta. (Part No: 957E11654) $38.59 [Enlarge Picture] Terminal Block - For Models: 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A) $11.90 [Enlarge Picture] Voltage Instrument Stabilizer - For (2000, 3000, 4000, 5000, 7000, 1965-1975), (2600, 3600, 4100, 4600, 5600, 6600, 7600, 1976 to 1981). Voltage stabilizer for instrument cluster replaces C5NN10N507A (Part No: C7NN10N507A) $30.81 [Enlarge Picture] Voltage Reducer w/ Bracket - 12 volt to 6 volt. (Part No: S.52671) $10.39 [Enlarge Picture] Voltage Regulator - Voltage regulator fits D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D alternators. For 550, 650, 2600, 3600, 4600, 8000, 9000, TW10, TW20, TW30, (Part No: D7NN10316B) $42.99 [Enlarge Picture] Voltage Regulator - For Models: Dexta 57-5 62, Major & Power Major Both 1952-2 1960. 4 conductors. Can Replace OEM # 81718301. (Part No: E1ADDN10505) $42.37 [Enlarge Picture] Voltage Regulator - For 8N - For Early Models with Front Mount Distributor (Part No: 8N10505B) $33.90 [Enlarge Picture] Voltage Regulator - For 8N - Side Distributor, with generator. (Part No: 8N10505C) $27.84 [Enlarge Picture] Voltage Regulator - For Models: 2000, 3000, 4000, 5000, 7000 With Lucas Generator. (Part No: D0NN10505A) $22.96 [Enlarge Picture] Voltage Regulator - Voltage regulator, 12-volt. For Models: NAA, Jubilee. (Part No: 8NE10307) $24.75 [Enlarge Picture] Voltage Regulator, 12 Volt - For Models: 231, 2310, 233, 234, 2600, 2610, 340, 340A, 3600, 3900, 4100, 420, 445, 4600, 515, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 5600, 5700, 650, 655A, 6600, 6700, 755, 755A, 755B, 7700, 8700, 9700. All w diesel engines and an alternator. (Part No: D1NN10316A) $43.13 [Enlarge Picture] Voltage Regulator, 12 Volt - For Models: (2810, 2910, 334, 335 Hiway 3610, 3910, 4110, 5110, 530A, 5610, 5900, 6610, 6710, 6810, 7410, 7710 diesel w alternator built between 1 1 1981-8 31 1986), (335 dsl w alt 10 1975-9 1978), (340B, 445A, 540B, 545A dsl w alt 6 1985-8 31 1986), (4610 dsl w alt 1 1 1986-8 31 1986), (6500, 7500 1974-10 1975), (7000, 8000, 9000 dsl w alt 1958-1964), (8000, 8200, 8400, 8600, 9000, 9200, 9600 dsl w alt 11 1 1971-12 31 1978). (Part No: D1NN10316A) $43.13 [Enlarge Picture] Voltage Regulator, 12 Volt - For Models: (NAA, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee all 1958-1964 with Diesel Engine. (Part No: C0NF10505A) $57.98 [Enlarge Picture] Voltage Regulator, 6 Volt - 6 volt positive ground for 1953-1964 GAS engine tractors: NAA, Jubilee, 1800, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (Part No: FAG10505A) $24.95 [Enlarge Picture] WIRING HARNESS - FRONT WIRING HARNESS.FORD TRACTORS MODELS: 5600, 6600, 7600. (Part No: C9NN14A103C) $59.90 Wire Harness, Main - Fits 2N, 9N (1939-43 with one-wire generator). (Part No: 86618153) $23.17 [Enlarge Picture] Wiring Harness - Has woven fabric casing. For 2N (1943 to 1947) w single pole generator. Ignition Wiring. (Part No: 2N14401) $20.46 [Enlarge Picture] Wiring Harness - One piece, front and rear. This is a complete harness for tractor. For tractors that uses alternator only. For Models: 2600, 3600, 3900, 4100, 4600. (Part No: S.67792) $177.11 Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B) $19.95 [Enlarge Picture] Wiring Harness - For Models: 600, 700, 800, 900. 1955-57, 6 Volt. Engine harness, does not include wire to front or rear lights. (Part No: FDN14401B) $34.95 [Enlarge Picture] Wiring Harness 12 Volt - For Late 8N. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Part No: 8NL10301) $39.95 [Enlarge Picture] Wiring Harness 12 Volt - Wiring harness for 2N, Early 8N, and 9N that has been converted to 12 Volt. Does not include light wiring. (Part No: 8NE10301) $39.95 [Enlarge Picture] Wiring Harness Main - For Dexta 1957-4 60. (Part No: 957E14401D) $132.77 [Enlarge Picture] Wiring Harness Main - For models Super Dexta 11 60-64. (Part No: 957E14401H) $147.43 [Enlarge Picture] Wiring Harness Main - For Fordson Major. (Part No: E1ADDN14401B) $114.12 [Enlarge Picture] Wiring Harness Main - For Power Major and Super Major.Replaces E1ADDN14401N. (Part No: E1ADDN14401J) $143.80 [Enlarge Picture] Wiring Harness, 12 Volt Conversion - For Models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 1953-64. (Part No: NAA10301) $38.95 [Enlarge Picture] Wiring Harness, 12 Volt System - Ignition wiring harness for 2000 <1964, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 3000, 4000 <1964, 4030, 4031, 4040, 4110, 4120, 4121, 4131, 4140, 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. Main Wiring Harness 1958 thru 1964 with 12 volt system. (Part No: 311043) $34.43 [Enlarge Picture] Wiring Harness, 6 Volt - Has woven fabric casing. For 8N with front mounted distributor and 2 wire generator, up to s n 263843. Ignition wiring harness. (Part No: 8N14401B) $19.95 [Enlarge Picture] Wiring Harness, 6 Volt - Has woven fabric casing. For 8N Side mount distributor, s n 263843 and up. Ignition wire harness. (Part No: 8N14401C) $19.95 [Enlarge Picture] Wiring Harness, 6 Volt System - Ignition wiring harness. For 2000, 3000, 4000, 501, 601, 701, 801, 901. 6 volt systems 1958 to 1964. (Part No: 310996) $23.95 [Enlarge Picture] Wiring Harness, Restoration Quality - Complete wiring harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For Models: 2N, 9N w single terminal generator. Replaces 2N14401 & 9N14401B. (Part No: 9N14401B) $147.82 [Enlarge Picture] Wiring Harness, Restoration Quality - Complete wiring harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For Model: 8N up to s n 263843 with front mount distributor. (Part No: 8N14401B-OE) $171.17 [Enlarge Picture] Wiring Harness, Restoration Quality - Complete wiring harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 gas 1953-1957. NOTE: if you have a fuel gauge you will need to reuse gauge and sending unit wires. Replaces FDN14401B & FAF14401B. (Part No: FDN14401B-OE) $182.87 [Enlarge Picture] Wiring Harness, for Generator, Front & Rear Halves - 2 Piece set. Woven Fabric Casing. Fits DIESELS using generator (1965-74): 2000, 3000, 4000. Also replaces C5NN14N104R. Must be used as a set - will not plug into original harness. (Part No: C9NN14A103B) $43.22 [Enlarge Picture]   Engine Bearings Bearing - Bearing w\collar (168640), cross drive. For Models: 907, 917. (Part No: 175082) $39.21 Bearing - Blade drive shaft bearing. For Models: 902, 906. (Part No: 108039) $26.16 Bearing - Bearing assembly, for spindle thrust. For 2310, 2600, 2610, 2910, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4200, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5700, 6600, 6700, 7000, 7100, 7600, 7700 (Part No: C5NN3A299A) $7.91 Bearing Kit - For Models: 242, 243, 246. (Part No: HUB0807) $24.88 Camshaft Bearing - Single camshaft bearing fits the following gas & diesel tractors 1965 & up: 2000, 3000, 2600, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 7610, 7710, 8000, 8200, 8600, 8700, TW10, 9000, 9200, 9600, 9700. (Part No: C5NE6261B) $7.62 [Enlarge Picture] Cross & Bearing Assembly - Cross & bearing kit, drive shaft. For 907, 917 (Part No: 243250) $14.70 Cross & Bearing Assembly - Cross & bearing kit. Two used on 605 and three used on 612 Harvester PTO drive shaft assembly. (24324) For 605, 612 (Part No: CBA350) $18.22 Main Bearing Set - For (8000 401 CID Diesel 1968-9 1972), (8000, 8200, 8600 401 CID Diesel 10 1972-7 1976), (8700 401 CID Diesel 8 1976-1978), (TW10 401 CID Diesel 1979-1982), (9000, 9200, 9600, 6 1972-7 1976), (9700 401 CID Turbo Diesel 8 1976-1978), (TW20, TW30 401 CID Turbo Diesel 1979-1982). Main Bearing set. Specify size when ordering: Standard, .010, .020, .030. (Part No: MB401D) $129.85 Main Bearing Set - Available in STD, .010, .020, .030 For 7810, 7910, 8210, TW5 with BSD666 Diesel Engine. Specify size in Comments box when ordering. (Part No: MS-977AL) $111.38 Main Bearing Set, Std - Standard. Replaces 6-CFPN6333B & 1-EBPN6337B. For Models: 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: MBK636) $126.24 Main Bearing Set, Std - Standard set, main bearings, 5 pair. For MAJOR, SUPER MAJOR. Set comes with .STD Thrust Washers. (Part No: MBK-FMD) $59.58 Main Bearing Set, Std - Main Bearing Set. For Models: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces 4-CFPN6333B & 1-EBPN6337B. (Part No: MBK634) $74.98 [Enlarge Picture] Main Bearing Set, .010 - .010" undersize set, 5 pair. For FORDSON MAJOR, SUPER MAJOR. Kit comes with .STD Thrust Washers. (Part No: MBK-FMD-010) $59.58 Main Bearing Set, .010 - Replaces 4-CFPN6333D & 1-EBPN6337D. For 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: MBK634-010) $77.44 [Enlarge Picture] Main Bearing Set, .010 - .010" bearing. Replaces 6-CFPN6333D & 1-EBPN6337D. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30, (Part No: MBK636-010) $126.24 Main Bearing Set, .010 - .010" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633E-010) $44.60 [Enlarge Picture] Main Bearing Set, .010 - For Models: (1710 1983-5 84), 1900, (1910, 2110 1983-5 84), 2120, CL45, CL55. (Part No: SBA198516780) $66.97 Main Bearing Set, .020 - .020" undersize set, 5 pair. For FORDSON MAJOR, SUPER MAJOR. Kit comes with .STD Thrust Washers. (Part No: MBK-FMD-020) $59.58 Main Bearing Set, .020 - Replaces 4-CFPN6333E & 1-EBPN6337E. For 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: MBK634-020) $77.44 [Enlarge Picture] Main Bearing Set, .020 - Replaces 6-CFPN6333E & 1-EBPN6337E. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30, (Part No: MBK636-020) $136.45 Main Bearing Set, .020 - .020" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633G-020) $44.60 [Enlarge Picture] Main Bearing Set, .030 - .030" undersize set, 5 pair. For FORDSON MAJOR, SUPER MAJOR. Kit comes with .STD Thrust Washers. (Part No: MBK-FMD-030) $59.58 Main Bearing Set, .030 - Replaces 4-CFPN6333F & 1-EBPN6337F. For Models: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: MBK634-030) $77.44 [Enlarge Picture] Main Bearing Set, .030 - Replaces 6-CFPN6333F & 1-EBPN6337F. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30, (Part No: MBK636-030) $136.45 Main Bearing Set, .030 - .030" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633-030) $52.68 [Enlarge Picture] Main Bearing Set, .040 - .040" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For Models: 2N, 8N, 9N. (Part No: MBK9N633-040) $58.44 [Enlarge Picture] Main Bearing Set, .040 - For Models: Major, Power Major, Super Major. (Part No: S.65217) $39.18 Main Bearing Set, .060 - 1 kit used per engine. Contains center, front, and rear bearings. For models 2N, 8N, and 9N. (Part No: MS-120P-060) $54.90 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-STD) $50.42 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 & 172 4-cylinder GAS or Diesel engines.(.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-010) $50.42 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 & 172 4-cylinder GAS or Diesel engines(.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-020) $50.42 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 & 172 4-cylinder GAS or Diesel engines.(.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-030) $50.42 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-040) $50.42 [Enlarge Picture] Main Bearing Set, 158 & 201 Gas or Diesel & 192 Gas, STD - Replaces 3-CFPN6333B & 1-EBPN6337B. 1 kit used per engine. Non-flanged main bearings. Flanged thrust bearing. For 2000, 2600, 3000, 3600, 4000, 4600, (Part No: MBK633) $59.49 [Enlarge Picture] Main Bearing Set, 158 & 201 Gas or Diesel & 192 Gas, .010 - Replaces 3-CFPN6333B & 1-EBPN6337B. 1 kit used per engine. Non-flanged main bearings. Flanged thrust bearing. For Models: 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633-010) $59.49 Main Bearing Set, 158 & 201 Gas or Diesel & 192 Gas, .020 - Replaces 3-CFPN6333B & 1-EBPN6337B. 1 kit used per engine. Non-flanged main bearings. Flanged thrust bearing. For Models: 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633-020) $59.49 Main Bearing Set, 158 & 201 Gas or Diesel & 192 Gas, .030 - Replaces 3-CFPN6333B & 1-EBPN6337B. 1 kit used per engine. Non-flanged main bearings. Flanged thrust bearing. For 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633-030) $59.49 Main Bearing Set, Perkins 144, 152 Diesel - Fits 144 CID & 152 CID 3 cylinder diesel engines .010" undersize set, 4 pair and thrust washers. For DEXTA, Super Dexta. (Part No: MBK-FDX-010) $26.12 Main Bearing Set, Perkins 144, 152 Diesel - 144 CID or 152 CID 3 cylinder diesel engines .020" undersize set, 4 pair and thrust washers. For DEXTA, Super Dexta. (Part No: MBK-FDX-020) $26.12 Main Bearing Set, Perkins 144, 152 Diesel - 144 CID & 152 CID Perkins 3 cylinder diesel engines .030" undersize set, 4 pair and thrust washers. For DEXTA, Super Dexta. (Part No: MBK-FDX-030) $26.12 Main Bearing Set, Perkins 144, 152 Diesel - 144 CID & 152 CID Perkins 3 cylinder diesel engines. Standard set, main bearings , 4 pair and thrust washers. For DEXTA, Super Dexta. (Part No: MBK-FDX) $26.12 Main Bearing Set, STD - Standard main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633A-STD) $44.60 [Enlarge Picture] Main Bearing Set. STD - For Models: (1710, 1910, 2110 all 1983-5 1984), 1900, 2120, CL45, CL55. THESE DO NOT HAVE A GROOVE IN ONE HALF LIKE PICTURED. (Part No: SBA198516770) $51.21 [Enlarge Picture] Rod Bearing - Single rod bearing available in Std, .010, .020, .030.. For Models: (3000, 3600 w 175 CID diesel), (4000 w 192 or 201 gas), (4000, 4600 w 201 diesel), (5000, 5500, 5610, 6000, 6600 w 256 diesel), (6600, 6610 w BSD444 diesel), (8000, 8600, 8700, TW10 w 401 diesel), (7810, 7910, 8210, TW5 w BSD666 diesel). (Part No: CB-757AL) $16.02 Rod Bearing Pair 010 - .010" undersize bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30, (Part No: DGPN6211C) $20.56 Rod Bearing Pair 020 - .020" undersize bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30, (Part No: DGPN6211D) $20.56 Rod Bearing Pair 030 - .030" undersize bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30, (Part No: DGPN6211E) $20.56 Rod Bearing Pair STD - Standard bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30, (Part No: DGPN6211A) $20.56 Rod Bearing Pair, Standard - For Models: 2N, 8N, 9N. 1 Pair for one Rod. Must be ordered in lots of 4. (Part No: 9N6211A-PAIR) $8.50 Rod Bearing Pair, .001 - Four required per engine. For 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. ROD Bearing Pair. Must be ordered in multiples of 4. Price is each. (Part No: 312101-PAIR) $9.39 Rod Bearing Pair, .001 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211B-PAIR) $8.50 Rod Bearing Pair, .002 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211C-PAIR) $8.50 Rod Bearing Pair, .010 - For Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Must be ordered in multiples of 4. Price is each. (Part No: 312103-PAIR) $7.10 Rod Bearing Pair, .010 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211E-PAIR) $8.50 Rod Bearing Pair, .020 - For Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Must be ordered in multiples of 4. Price is each. (Part No: 312104-PAIR) $8.03 Rod Bearing Pair, .020 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211G-PAIR) $8.50 Rod Bearing Pair, .030 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211-030-PAIR) $8.50 Rod Bearing Pair, .030 - For Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA.Minimum order is 4.Priced each. (Part No: C0NN6211B-PAIR) $10.26 Rod Bearing Pair, .040 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211-040-PAIR) $8.50 Rod Bearing Set 010 - ROD Bearing SET 010 For DEXTA, Super Dexta. (Part No: 737071M91) $13.90 Rod Bearing Set 020 - ROD Bearing SET 020 For DEXTA, Super Dexta. (Part No: 737072M91) $13.90 Rod Bearing Set 030 - ROD Bearing SET 030 For DEXTA, Super Dexta. (Part No: 737073M91) $13.90 Rod Bearing Set STD - Standard set, 3 pair. For DEXTA, SUPER DEXTA. (Part No: CRK-FDX) $13.90 Rod Bearing Set, STD - STD connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N. (Part No: CRK9N6211A-STD) $22.90 [Enlarge Picture] Rod Bearing Set, Std - For Models: Major, Super Major with 220 CID 4 Cylinder Diesel. (Part No: CRK-FMD) $28.18 Rod Bearing Set, .010 - For Models: Major, Super Major with 220 CID 4 Cylinder Diesel. (Part No: CRK-FMD-010) $27.96 Rod Bearing Set, .010 - .010" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N, (Part No: CRK9N6211E-010) $27.00 [Enlarge Picture] Rod Bearing Set, .010 - 4 Rods. For Models: (1710 1983-5 84), 1900, (1910, 2110 1983-5 84), 2120, CL45, CL55. (Part No: SBA198516480) $78.94 Rod Bearing Set, .020 - .020" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211G. For 2N, 8N, 9N, (Part No: CRK9N6211G-020) $25.90 [Enlarge Picture] Rod Bearing Set, .020 - For Models: Major, Super Major with 220 CID 4 cylinder Diesel Engine. (Part No: CRK-FMD-020) $30.81 Rod Bearing Set, .020 - 4 Rods. For Models: (1710 1983-5 84), 1900, (1910, 2110 1983-5 84), 2120, CL45, CL55. (Part No: SBA198516490) $78.94 Rod Bearing Set, .030 - For Models: Major, Super Major with 220 CID 4 Cylinder Diesel. (Part No: CRK-FMD-030) $27.96 Rod Bearing Set, .030 - .030" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-030. For 2N, 8N, 9N, (Part No: CRK9N6211-030) $31.05 [Enlarge Picture] Rod Bearing Set, .040 - .040" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-040. For 2N, 8N, 9N, (Part No: CRK9N6211-040) $27.90 [Enlarge Picture] Rod Bearing Set, .040 - For Models: Major, Power Major, Super Major. (Part No: S.65193) $29.92 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312103-010) $28.05 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.020 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312104-020) $35.70 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-030) $29.70 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-040) $26.80 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-STD) $33.84 [Enlarge Picture] Rod Bearing Set, STD - For Models: 1000, 1500, 1600, 1700, 1910, 2110, 2120, CL45, CL55. (Part No: SBA198516091) $78.94 [Enlarge Picture] Rod Bearing, .010 - SINGLE rod bearing (.010 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211D) $12.00 [Enlarge Picture] Rod Bearing, .020 - SINGLE rod bearing (.020 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211E) $12.00 [Enlarge Picture] Rod Bearing, .030 - SINGLE rod bearing (.030 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211F) $12.00 [Enlarge Picture] Rod Bearing, .040 - SINGLE rod bearing (.040 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211G) $12.00 [Enlarge Picture] Rod Bearing, .060 - Single rod bearing. For Model: 9N, 2N, 8N. (Part No: CB-200P-060) $9.28 [Enlarge Picture] Rod Bearing, STD - SINGLE rod bearing (STD size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211B) $12.16 [Enlarge Picture] Thrust Bearing - For Models: 5000, 5600, 5610, 5700, 6600, 6600C, 6610, 6700, 6710, 7000, 7600, 7600C, 7610, 7700, 7710. (Part No: C0NN3A299A) $17.26 [Enlarge Picture] Thrust Washer Set, Std - For Models: Fordson Major, Power Major, Super Major. Replaces E160Z9. (Part No: E159Z9) $36.69 WP Idler Bearing - Bearing for fan belt idler pulley. I.D. 17mm .669", O.D. 40mm 1.575", W 21mm .827". For 231, 233, 2600, 333, 335, 3600, 3900, 4100, 4600, 515, 531, 532, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW25, TW30, TW35, TW5, (Part No: E0NN2A898AA) $33.66 [Enlarge Picture]   Engine Gaskets Bottom Gasket Set, 158 or 175 CID Gas-Diesel - Lower gasket set fits 3 cylinder gas or diesel engines. Contains Front and Rear Crankshaft Seals. For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600. (Part No: EAPN6A008A) $45.24 [Enlarge Picture] Crank Seal, Front - Fits 3, 4 and 6 cylinder diesel engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. (Part No: D5NN6700A) $8.80 [Enlarge Picture] Crank Seal, Rear - Fits 3, 4 and 6 cylinder diesel engines in: 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30, (Part No: E5NN6701BA) $28.14 [Enlarge Picture] Crankshaft Seal, Front - For Models: 2000 before 1964, 500, 600, 700, NAA (Part No: EAA6700B) $6.57 [Enlarge Picture] Crankshaft Seal, Front - For Models: 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA198636040) $12.28 Crankshaft Seal, Front, Lower - Rope seal, front, lower. For Models: 2N, 8N, 9N. ``**Sold in multiples of 2, priced each. (Part No: 8N6700) $2.64 [Enlarge Picture] Crankshaft Seal, Front, Upper - Rope seal, front, upper. For Models: 2N, 8N, 9N. ``**Sold in multiples of 2 priced each. (Part No: 8N6707) $2.64 [Enlarge Picture] Crankshaft Seal, Rear - For Models: 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA198636050) $13.80 Crankshaft Seal, Rear - Fits 134 CID, 172 CID gas & 175 CID diesel engines. For Models: 2000 up to 1964, 4000 1962 - 1964, 500, 600 Series, 700 Series, 800 Series 1955 - 1957, 801 Series 1958 - 1962, 900 Series 1955 - 1957, 901 Series 1958 - 1962, NAA, Jubilee. Comes in Halves. 2 needed for complete seal. Min order qty is 2. (Part No: C0NN6701A) $5.64 [Enlarge Picture] Crankshaft Seal, Rear Rope Type - Fits 3 cylinder diesel engines. ***SOLD IN MULTIPLES OF 2***, price shown is for 1. For Models: 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. ***Must order in multiples of 2*** (Part No: 735866M1) $3.46 Crankshaft Seal, Rear, Lower - Rope seal, rear, lower. For Models: 2N, 8N, 9N. Sold in multiple of 2 priced each. (Part No: 8N6702) $1.90 [Enlarge Picture] Crankshaft Seal, Rear, Upper - Rope seal, rear, upper. For Models: 2N, 8N, 9N. Sold in multiple of 2 priced each. (Part No: 8N6701) $1.90 [Enlarge Picture] Distributor Breaker Cover Gasket - For models 9N, Early 8N, 2N. SOLD IN QUANTITIES OF 10, PRICE IS FOR 1. (Part No: 9N12276) $1.00 [Enlarge Picture] Distributor Gasket kit - For models 9N, 2N, 8N prior to s\n 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104) $2.32 [Enlarge Picture] Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448) $2.50 [Enlarge Picture] Full Gasket Set - Full Engine Overhaul Gasket Set with metal head gasket. For Models: 9N, 2N, 8N. (Part No: 8N6008M) $28.74 [Enlarge Picture] Full Gasket Set - For Model: 2110. (Part No: SBA195906420) $75.24 [Enlarge Picture] Gasket Kit - Upper engine gasket kit (includes head gasket) for 3-cyl 152 CID Diesel engine in: Dexta, Super Dexta. Does not come with valve seals. (Part No: VG152D) $49.50 [Enlarge Picture] Gasket Kit - Upper engine kit. For Models: 2000, 501, 601, 701. (Part No: VGCPN1) $30.27 Gasket Kit - Upper engine kit. For MAJOR DIESEL with a 1 1 4 inch piston pin. Manifold bolts are in a straight line. No holes in valve cover gasket. (Part No: VGDDNE) $71.23 [Enlarge Picture] Gasket Kit, UPPER - Upper engine kit. 6 Holes in Valve cover gasket. For MAJOR DIESEL with a 1 3 8 inch piston pin. (Part No: VGDDNF) $65.14 Gasket Set - H Complete gasket set. Contains upper & lower sets, and head gasket. For Models: 8000, 8200, 8600, 9000, 9200, 9600, (Part No: FS4817) $216.28 Gasket Set - H Complete gasket set. Contains upper & lower sets, and head gasket. For 8700, 9700, TW10, TW20, TW30, (Part No: FS6893) $219.63 Gasket Set - Cylinder head gasket set with head gasket For 8700, 9700, TW10, TW20, TW30, (Part No: HS6893) $127.30 Gasket Set, Complete - For 233 CID DIESEL engine in: 5000 (1965 to 3 1968), (5600 & 5700, 1975 to 9 1980) . Contains upper & lower sets, and head gasket. (Part No: FS5000) $93.58 Gasket Set, Complete - For 256 GAS DIESEL or 268 CID DIESEL engines in: 5000 (4 1968 to 1975), 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Contains upper & lower sets, and head gasket. (Part No: FS5670) $89.17 Gasket Set, Lower - For 233 268 DIESEL or 256 GAS DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: CFPN6A008C) $46.96 Gasket, Oil Pan Drain Plug - Fits 9N, 2N, 8N. (Part No: 8N6734) $.99 [Enlarge Picture] Governor Housing Mounting Cover Gasket - For Models: 9N, 2N, 8N. (Part No: 9N6022) $1.52 [Enlarge Picture] Head Gasket Kit, 172 Diesel - For Models: 4000, 801, 901.(Upper gasket set with head gasket). (Part No: VG172D) $33.07 Head Gasket - For Models: 2600, 3600. (Part No: D3NN6051E) $25.44 [Enlarge Picture] Head Gasket - For 233 CID DIESEL engine in: 5000 (1965 to 3\1968), 5600, 5700. (Part No: D3NN6051F) $26.04 Head Gasket - For 233 268 DIESEL or 256 GAS DIESEL engines in: 5000 (4\1968 to 1975), 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: F1NN6051BA) $25.36 Head Gasket - Head gasket. All soft material except for the fire rings. For Models: 2N, 8N, 9N. (Part No: 8N6051A) $7.24 [Enlarge Picture] Head Gasket - Head gasket, all metal. For 2N, 8N, 9N (Part No: 8N6051B) $8.45 [Enlarge Picture] Head Gasket - For Models: 2000, 3000. 3 Cylinder Gas or Diesel. (Part No: C7NN6051R) $20.64 [Enlarge Picture] Head Gasket - For Major, Power Major and Super Major; all with 220 Engine. (Part No: E1ADDN6051E) $27.95 [Enlarge Picture] Head Gasket - For Model: 2110. (Part No: SBA111146783) $33.07 [Enlarge Picture] Head Gasket 134/172 Gas - Head gasket, non-metallic with 1 2" head bolt holes. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: E9JL6051AA) $23.95 [Enlarge Picture] Head Gasket 172 Gas - Head gasket, non-metallic with 7 16" head bolt holes. For Models: 800, 900, 801, 901, 4000 all 1963-64. (Part No: EAF6051D) $21.95 [Enlarge Picture] Head Gasket 201 Late Diesel - Head gasket for 3 cylinder diesel for 4000, 4600 both 1975-1981. (Part No: E0NN6051AA) $27.50 Head Gasket Set - For Models: (4000, 4600 w 201 diesel engine built between 1965-6 1969)or 4000 w 192 or 201 gas engine. (Part No: HS3523) $36.01 Head Gasket Set - For Models: 7000, 7500, 7600, 7700 with 256 Turbo Diesel Engine. (Part No: HS4940) $47.09 Head Gasket Set - For Models: 6600, 6610 with BSD444 Four Cylinder Diesel Engine. (Part No: HS4940) $47.09 Head Gasket Set - For Model: 7710 with BSD444 Turbo Diesel Engine (4-cylinder). (Part No: HS4940) $47.09 Head Gasket Set - For Models: 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, with 401 Non-Turbo Diesel Engine. (Part No: HS4818) $119.24 Head Gasket Set - For Models: 7810, 7910, 8210, TW5 with BSD666 Diesel Engine. (Part No: HS4818) $119.24 Head Gasket, 134 or 172 CID Gas Engines - Head gasket, metal clad with 7\16 head bolt holes. For 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000, 4000 with 134 172 gas engines. (Part No: EAE6051DM) $17.32 [Enlarge Picture] Head Gasket, 172 Diesel - Head gasket. For 4000, 801, 901. (Part No: 310662) $27.76 Head Gasket, Diesel - Head gasket. 144 CID 4-cylinder Diesel. For Models: 2000, 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771 . (Part No: B9NN6051A) $44.74 Lower Gasket Set - For Models: 8000, 8200, 8600, 9000, 9200, 9600. (Part No: CKPN6A008A) $89.30 Lower Gasket Set - Lower gasket set For Diesel engine in: 8700, 9700, TW10, TW20, TW30. (Part No: CS515206) $93.01 Lower Gasket Set - Used on 134 CID & 172 CID gas or diesel engines. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: CS3477) $44.95 Lower Gasket Set, 175 Diesel - For Models: 3000, 3600 w 175 CID diesel. (Part No: CS3523) $54.70 Main Bearing Cap Packing Material, V-Style - For 134 CID Gas in NAA, Jubilee. Price is for each.``**MINIMUM ORDER QTY IS 2. Must be ordered in quantities of 2. (Part No: B3NN6336A) $3.18 [Enlarge Picture] Oil Pan Gasket - Gasket, oil pan. For GAS DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: 87840324) $14.92 [Enlarge Picture] Oil Pan Gasket - Gasket, oil pan. For Models: 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: 87840326) $13.14 Oil Pan Gasket - Fits 134 gas and 172 gas diesel engines in : NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B) $6.38 [Enlarge Picture] Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610. (Part No: F0NN6710AA) $9.99 [Enlarge Picture] Oil Pan Gasket Set - Fits Dexta, Super Dexta. (Part No: 957E6700) $15.80 [Enlarge Picture] Oil Pan Gasket Set - Fits Major, Super Major. (Part No: E1ADDN6781C) $24.80 [Enlarge Picture] Oil Pan Gasket Set - For 9N, 2N, 8N; through 1964. 7 Piece Set. Oil Pan Gasket Set with upper and lower crankshaft rope seals, left and right oil pan gaskets, and oil pan drain plug gasket. (Part No: 9N6781) $14.04 [Enlarge Picture] Oil Seal - Oil seal, inner for rocker shaft. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Part No: C5NN3C615B) $8.50 Oil Seal, Front - 60mm x 89mm x 12mm. For Models: Major, Power Major, Super Major. All with 220CID engine. (Part No: 510E6362) $18.74 Overhaul Gasket Kit - For Diesels, Dexta 144", Super Dexta 152". Overhaul Gasket Kit. (Part No: 152D6008) $78.95 [Enlarge Picture] Overhaul Gasket Kit - No holes in valve cover gasket. For Major Diesel to 1618653, 1952 to 4-57. This engine had 2 type of manifold requiring different manifold gaskets. This kit comes with the staggard stud type manifold. If you have the Straight Line of Studs type, you must also order S.66947 to receive the correct manifold gasket. (Part No: DDN6008AA) $90.05 [Enlarge Picture] Overhaul Gasket Kit - 6 Holes in valve cover gasket. Kit also Contains Front lip type & rear rope type seals. For Major & Super Major Diesel 1618653 and up, 4-57 to 8-61. Overhaul Gasket Kit. (Part No: DDN6008AB) $101.16 [Enlarge Picture] Overhaul Gasket Kits - For Models: 501, 601, 701, 2000; 134" gas 1958-1964. Overhaul Gasket Kit, Gas Models. (Part No: CPN6008H1) $50.00 Overhaul Gasket Set - For Models: 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771, 2000 with 144 CID Diesels 1958 to 1964. (Part No: 144-6008D) $73.52 Overhaul Gasket Set - For Models: 3610, 3910, all Gas 1981-04 1982, 192 CID. Overhaul Gasket Set. (Part No: 3A454FS) $85.00 Overhaul Gasket Set - For Models: 4000 (1965 to 3 1968) , 4600(With 192 CID and 201 CID 3-Cylinder Gas 4.4 inch Bore), 4000(With 201 CID 3-Cylinder Diesel 4.4 inch Bore). This for a complete gasket set includes crank seals. (Part No: FS4000) $74.13 Overhaul Gasket Set - 4000 6 1969-1975, 4600 1975-1981, both with 201 CID Diesel. Overhaul Gasket Set with crankshaft seals. (Part No: OGS201) $113.48 Overhaul Gasket Set - For Models: 2600 1976-1980, 2610 1981 & up, 3600 1976-1980, all with Diesel Engine. Overhaul Gasket Set includes Head Gasket, Upper Set and Lower Set (Part No: FS2302) $75.07 Overhaul Gasket Set - Full Overhaul Gasket Set For NAA, Jubilee, 600, 700 - 134" Gas Engine (Head gasket for 7 16 head bolts)(1953-1957) (Part No: CPN6008HM) $43.07 [Enlarge Picture] Overhaul Gasket Set Less Head Gasket 134/172 Gas - For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN) $31.71 [Enlarge Picture] Overhaul Gasket Set, 172 Diesel - For Models: 801, 901; 1958 and up, 4000 up to 1964. Overhaul Gasket Kit. (Part No: 172-6008D) $89.90 [Enlarge Picture] Overhaul Gasket Set, 172 Diesel - Complete gasket set includes seals. For 172 diesel in 801, 901, (4000 1964 only). (Part No: 3A50FS) $80.52 Overhaul Gasket Set, 172 Gas - For 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit for engine heads that use 7 16 inch head bolts. Includes crankshaft seals. (Part No: FPN6008B) $48.07 [Enlarge Picture] Overhaul Gasket Set, 172 Gas - For Models: 801, 901; 172 CID Gas 1958 and up, 4000 to 1964. Overhaul Gasket Kit for engine heads that use 1 2 inch head bolts. Includes with crankshaft seals. (Part No: FPN6008B1) $57.23 [Enlarge Picture] Overhaul Gasket Set, 201 Diesel - Complete gasket set. Contains upper & lower sets, with head gasket. For 4000 and 4600 with 3 cylinder diesel. (Part No: FS3400D) $74.15 Overhaul Gasket Set, 3-Cylinder - For 2000 using 158 CID Gas (1965-1975) or 3000 using 175 CID Diesel (1965-1975)Engines. Overhaul Gasket Set (less crank seals) includes: Head Gasket, Upper Set and Lower Set. (Part No: FS2300) $64.99 Rear Seal Gasket - Gasket, crankshaft rear seal retainer. For 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Part No: E9NN6N305AB) $6.84 [Enlarge Picture] Rocker Cover Gasket - Less bolt holes. For Models: Major, Power Major up to 5 1957. (Part No: E1ADKN6584A) $20.40 [Enlarge Picture] Rocker Cover Gasket - With bolt holes. For Models: Power Major, Super Major from 5 1957 and up. (Part No: 528E6584B) $18.94 [Enlarge Picture] Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $4.45 [Enlarge Picture] Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR) $6.66 [Enlarge Picture] Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR) $6.18 [Enlarge Picture] Timing Gear Front Cover Gasket - For Models: 9N, 2N, (8N prior to s n 263844). (Part No: 9N6020A) $1.59 [Enlarge Picture] Timing Gear Front Cover Gasket - For Model: 8N s n 263844 and up. (Part No: 8N6020C) $1.25 [Enlarge Picture] Timing Gear Front Cover Gasket - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B) $1.95 [Enlarge Picture] Timing Gear Side Cover Gasket - For Models: 9N, 8N, 2N. (Part No: 8N6018) $1.50 [Enlarge Picture] Top Gasket Set - Top Gasket Set For 2000, 2600, 3000, 3600, 4000, 4600. All with 158 CID 3 cylinder gas or diesel engine. Does NOT include head gasket. (Part No: CFPN6008B) $18.92 Upper Engine Gasket Set - Metal head gasket w 7 16" bolt holes. For tractors: NAA, Jubilee, 600, 700; 134 CID engine (1953-1957). (Part No: VGCPNM) $25.26 [Enlarge Picture] Upper Gasket - Cylinder head gasket set with head gasket. For 2600, 3600, gas 3 cylinder 158 and 175 CID Engines. (Part No: HS2302) $33.61 Upper Gasket - Cylinder head gasket set with head gasket. For 8000, 8200, 8600, 9000, 9200, 9600, (Part No: HS4817) $127.30 Upper Gasket Set - For 233 CID DIESEL engine in: (5000, 1965 to 3\1968), 5600, 5700. Includes head gasket. (Part No: HS5000) $39.99 Upper Gasket Set - For 233 268 DIESEL or 256 GAS DIESEL engines in: 5000 (4\1968 to 1975), 5600, 5700, 6600, 6700, 6610, 6710, 7000, 7600, 7610, 7700, 7710. Includes head gasket. (Part No: HS5670) $41.09 Upper Gasket Set - Upper engine kit. For Models: 2000, 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771 with 144 CID diesel. (Part No: VG144D) $42.04 Upper Gasket Set - For Models: 8N, 9N, 2N. Upper Gasket Set with Metal Head Gasket. (Part No: VG8NM) $20.72 [Enlarge Picture] Upper Gasket Set, 158 or 175 CID Diesel - Cylinder head gasket set with head gasket. Fits 158 or 175 CID 3-cyl Diesel engine in: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600. (Part No: HS2300) $30.27 Upper Gasket Set, 172 Gas - For Models: 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit with 1 2 inch head bolts. (Part No: VGFPN1) $42.44 [Enlarge Picture] Upper Gasket Set, 172 Gas - Upper engine gasket kit. Kit includes EAF6051D, EAF6584C, C0NN9448C. For Models: 800, 900, 801, 901, 4000 1963-1964 with 7 16 inch head bolts. (Part No: VGFPN) $25.26 [Enlarge Picture] Upper Gasket Set, Less Head gasket - For 233 268 DIESEL or 256 GAS DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Does NOT include head gasket. (Part No: CFPN6008C) $17.25 Valve Cover Gasket - For Models: 4000, 801, 901 all Diesel before 1964. ***Must be ordered in mulitples of 2**** Priced Each. (Part No: 311321) $8.74 [Enlarge Picture] Valve Cover Gasket - Price is for each, minimum order quantity is 2. For Models: 2N, 8N, 9N. (Part No: 7HA6521) $1.10 [Enlarge Picture] Valve Cover Gasket 4 CYL - Gasket, valve cover. For 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710 (Part No: C7NN6584C) $8.18 [Enlarge Picture] Valve Cover Gasket, 4 CYL - Gasket, valve cover. For Models: 5000, 5110, 5600, 5610, 5700. (Part No: C7NN6584C) $8.18 [Enlarge Picture] Valve Cover Gasket, 3 CYL - Gasket, valve cover. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535. (Part No: C7NN6584B) $8.12 [Enlarge Picture] Valve Push Rod Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: EAF6521D) $5.39 [Enlarge Picture]   Engine Overhaul Kits Basic Engine Overhaul Kit, 134 CID Gas, Overbore - Made by TISCO. Super power 3.5” overbore Kit, Kit includes sleeve & piston set, rings, retainers, head gasket. Bearings must be ordered separately. For the following tractors using 134 CID 4 cylinder gas engine (1953-1957): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000. (Part No: BEKF110M-LCB) $369.95 [Enlarge Picture] Basic Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3 7 16 kit w metal head gasket. Contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For Models: NAA, Jubilee, 600, 700. (Part No: BEKF114AM-LCB) $300.42 [Enlarge Picture] Basic Engine Overhaul Kit, 172 Gas - Made by TISCO. 800, 801, 900, 901, (4000 1963-1964) with 172 CID 4 cylinder gas engine. Super power 4” overbore Kit, less bearings. Kit includes sleeve & piston set, full gasket set, and pin bushings. Bearings must be ordered separately . (Part No: BEKF109M-LCB) $350.51 Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic in frame kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BIFF106A) $199.31 [Enlarge Picture] Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Kit contains thin wall .040" sleeve, 3 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Kit does not include bearings. For Models: 2N, 8N, 9N. (Part No: BIFF103A) $179.95 [Enlarge Picture] Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic in frame kit contains, thin wall .040" sleeves 4 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. For Models: 2N, 8N, 9N. (Part No: BIFF102A) $179.95 [Enlarge Picture] Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4cylinder gas 3-3 16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BIFF105A) $179.95 [Enlarge Picture] Basic In Frame Overhaul Kit, 172 Diesel - Made by TISCO. Basic in-frame kit for 172 CID 4 Cylinder diesel engine 3.9" standard bore. Kit includes Sleeves, pistons, rings, pins, retainers, valve grind gasket kit, oil pan gasket. For Models: (4000 1963-1964), 801, 901. (Part No: BIFF20) $381.26 Basic In Frame Overhaul Kit, 172 Gas, Overbore w/ Metal Head Gasket - Made by TISCO. For Models: 800, 900, 801, 901, (4000 1963-1964) with 172" CID 4 cylinder gas engine with a standard bore of 3.9". Contains Super power set overbore to 4.0" PK109 sleeve and piston kit with rings, pins and retainers, VGFPN valve grinding gasket kit, EAF6710B crankcase oil pan gasket. (Part No: BIFF109M) $269.99 [Enlarge Picture] Basic In Frame Overhaul Kit, 172 Gas, Overbore w/ Non Metal Head Gasket - Made by TISCO. For Models: 800, 801, 900, 901, (4000 1963-1964), all with 172" CID 4 cylinder gas engine standard bore of 3.9". Kit contains Super power set overbore to 4.0". Contains: PK109 sleeve and piston kit with rings, pins and retainers, VGFPN1 valve grinding gasket kit, EAF6710B crankcase oil pan gasket. (Part No: BIFF109) $329.99 Basic In Frame Overhaul Kit, 172 Gas, w/ Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9" standard bore. Kit contains METAL head gasket with upper gasket set, sleeves, pistons, rings, pins & retainers, oil pan gasket. Bearings are available, must order separately. For Models: 4000 (1963-1964), 800, 801, 900, 901. (Part No: BIFF115AM) $249.95 [Enlarge Picture] Basic In Frame Overhaul Kit, 172 Gas, w/ Non Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9" standard bore. Kit contains, sleeves, pistons, rings, pins & retainers, NON-METAL head gasket with upper gasket kit, oil pan gasket. Bearings are available, must be ordered separately. For Models: 4000 (1963-1964), 800, 801, 900, 901. (Part No: BIFF115A) $259.99 Basic In Frame Overhaul Kit, 192 Gas - Made by TISCO. For 4000 Series with 192 CID gas 3 cylinder engine 4.4" standard bore 4.2" stroke 1965-3 68. Contains Pistons with pins and rings, upper gasket set, carburetor base gasket, head gasket and oil pan gasket. (Part No: BIFF1920G) $452.23 Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969), Std Pistons - Made by TISCO. Basic in-frame kit with Standard (E0NN6108AA) pistons. for 201 CID 3-cyl Diesel 4.4" standard bore. Kit includes pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 ( 1965-5 1969). (Part No: BIFF2010D) $339.95 Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969),.020 Pistons - Made by TISCO. Basic in-frame kit with .020 oversize pistons for 201 CID 3-cyl Diesel 4.4" standard bore. Kit includes .020" pistons, rings, valve grind gasket kit, oil pan gasket. For Model: 4000 ( 1965-5 1969). (Part No: BIFF2012D) $356.32 Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969),.030 Pistons - Made by TISCO. 20 CID 3 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030 oversize pistons. Comes w pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (1965-5 1969). (Part No: BIFF2013D) $356.53 Basic In Frame Overhaul Kit, 201 Diesel (1965 to 5-1969),.040 Pistons - Made by TISCO. Basic in-frame kit with.040 oversize pistons. For 201 CID 3-cyl Diesel. Kit includes pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (1965-5 1969). (Part No: BIFF2014D) $356.53 Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981), STD Pistons - Made by TISCO. Basic in-frame kit with standard pistons (E0NN6108AA) for 201 CID 3-cyl Diesel 4.4" std bore. Kit includes, pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BIFF2020D) $366.01 Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981),.020 Pistons - Made by TISCO. Basic in-frame kit with for 201 CID 3-cyl Diesel 4.4" standard bore. Kit includes, .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BIFF2022D) $310.98 Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981),.030 Pistons - Made by TISCO. Basic in-frame kit with.030 oversize pistons. for 201 CID 3-cyl Diesel. Kit includes, pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BIFF2023D) $366.01 Basic In Frame Overhaul Kit, 201 Diesel (6-1969 to 1981),.040 Pistons - Made by TISCO. Basic in-frame kit. for 201 CID 3-cyl Diesel 4.4" standard bore. Kit includes, .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BIFF2024D) $366.01 Basic In Frame Overhaul Kit, 201 Gas - Made by TISCO. For 4000 series and 4600 series, both with 201 CID gas 3 cylinder 4.4 standard bore 4.4" stroke engines 4 1968-1981. Contains Pistons with pins and rings, upper gasket set, carburetor base gasket, head gasket and oil pan gasket. (Part No: BIFF2010G) $373.30 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains standard pistons, rings, valve grind gasket kit, oil pan gasket. For 2000. (Part No: BIFF1580D) $352.49 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2000. (Part No: BIFF1582D) $352.49 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2000. (Part No: BIFF1583D) $352.49 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2000. (Part No: BIFF1584D) $352.49 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains standard pistons, rings, valve grind gasket kit, oil pan gasket. (D4NN6108A) For 2600. (Part No: BIFF1590D) $378.84 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1592D) $378.84 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1593D) $378.84 Basic Inframe Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1594D) $378.84 Basic Inframe Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gass 4.2" standard bore. Basic inframe kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1750G) $522.07 Basic Inframe Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2 " standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1752G) $522.07 Basic Inframe Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore Basic in-frame kit with .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1754G) $473.22 Basic Inframe Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with standard pistons. Contains Pistons, rings, valve grind gasket kit, oil pan gasket. For 3600. (Part No: BIFF1760D) $370.93 Basic Inframe Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with .020" oversize pistons. Contains pistons, rings, valve grind gasket kit, oil pan gasket. For 3600. (Part No: BIFF1762D) $369.63 Basic Inframe Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder Diesel 4.2" standard bore. Basic in-frame kit. Contains, .030" oversize pistons, rings, valve grind gasket kit, oil pand gasket. For 3600. (Part No: BIFF1763D) $369.63 Basic Inframe Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with.040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 3600. (Part No: BIFF1764D) $370.93 Basic Inframe Overhaul Kit, 175 Diesel, .020 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 3000. (Part No: BIFF1752D) $286.11 [Enlarge Picture] Basic Inframe Overhaul Kit, 175 Diesel, .030 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with.030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For Model: 3000. (Part No: BIFF1753D) $286.11 [Enlarge Picture] Basic Inframe Overhaul Kit, 175 Diesel, .040 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit with.040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For Model: 3000. (Part No: BIFF1754D) $286.11 [Enlarge Picture] Basic Inframe Overhaul Kit, 175 Diesel, Std Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic in-frame kit. Contains standard pistons, rings, valve grind gasket kit, oil pan gasket. For Model: 3000. (Part No: BIFF1750D) $252.90 [Enlarge Picture] Basic Inframe Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-framekit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3 1968), 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: BIFF2330D) $365.51 Basic Inframe Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with.020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3 1968), 5600(1975-9 1980), 5700 (1975-9 1980). (Part No: BIFF2332D) $376.07 Basic Inframe Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3 1968, 5600(1975-9 1980), 5700 (1975-9 1980). (Part No: BIFF2333D) $376.07 Basic Inframe Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3 1968), 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: BIFF2334D) $376.07 Basic Inframe Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4 1968-1975), 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: BIFF2560D) $413.50 Basic Inframe Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4 1968-1975), 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: BIFF2562D) $381.16 Basic Inframe Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4 1968-1975), 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: BIFF2563D) $413.50 Basic Inframe Overhaul Kit, 256 Turbo Diesel - Made by TISCO. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. 256 CID turbo-diesel 4-cylinder engine 4.4" std. bore. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BIFF2580D) $473.63 Basic Inframe Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BIFF2582D) $473.63 Basic Inframe Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030 oversize pistons (D6NN6108AB), rings, valve grind gasket kit, oil pan gasket. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BIFF2583D) $473.63 Basic Inframe Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .040" oversize pistons (D6NN6108AC), rings, valve grind gasket kit, oil pan gasket. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BIFF2584D) $473.63 Basic Inframe Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID diesel 4-cylinder engine 4.4" standard bore. Basic in frame kit with standard pistons, rings, valve grind gasket kit oil pan gasket. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BIFF42680D) $370.60 Basic Inframe Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore Basic in frame kit with .020" oversize pistons. (E0NN6108CA), rings, valve grind gasket kit, oil pan gasket. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BIFF42682D) $413.50 Basic Inframe Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic in frame kit with .040" oversize pistons (E0NN6108EA), rings, valve grind gasket kit, oil pan gasket. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BIFF42684D) $381.16 Basic Inframe Overhaul Kit, 268 Trubo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BIFF2680D) $473.63 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .020" oversize pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BIFF2682D) $473.63 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030" oversize pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BIFF2683D) $473.63 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .040" oversize pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BIFF2684D) $473.63 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: BIFF2690D) $582.82 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: BIFF2692D) $580.46 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: BIFF2693D) $580.46 Basic Inframe Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: BIFF2694D) $580.46 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8000 (1968-9 1972). (Part No: BIFF4010D) $484.37 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8000 (1968-9 1972). (Part No: BIFF4012D) $645.52 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8000 (1968-9 1972). (Part No: BIFF4013D) $682.43 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .040" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8000 (1968-9 1972). (Part No: BIFF4014D) $645.52 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket kit. For 8000, 8200, 8600 all built between (10 1972-7 1976). (Part No: BIFF4020D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, valve grind gasket kit, oil pan gasket kit. For 8000, 8200, 8600 all built between (10 1972-7 1976). (Part No: BIFF4022D) $680.19 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, valve grind gasket kit, oil pan gasket kit. For 8000, 8200, 8600 all built between (10 1972-7 1976). (Part No: BIFF4023D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .040" pistons, rings, valve grind gasket kit, oil pan gasket kit. For 8000, 8200, 8600 all built between (10 1972-7 1976). (Part No: BIFF4024D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BIFF4030D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BIFF4032D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BIFF4033D) $798.49 Basic Inframe Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic in-frame kit with .040" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BIFF4034D) $798.49 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 9000, 9200, 9600 all built between (6 1972-7 1976). (Part No: BIFF4040D) $910.89 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 9000, 9200, 9600 all built between (6 1972-7 1976). (Part No: BIFF4042D) $910.89 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 9000, 9200, 9600 all built between (6 1972-7 1976). (Part No: BIFF4043D) $876.65 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .040" pistons, rings, pins & retainers, valve grind gasket kit, oil pan gasket. For 9000, 9200, 9600 all built between (6 1972-7 1976). (Part No: BIFF4044D) $910.89 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BIFF4050D) $798.49 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .020" pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BIFF4052D) $798.49 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .030" pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BIFF4053D) $798.49 Basic Inframe Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic in-frame kit with .040" pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BIFF4054D) $798.49 Basic Overhaul Kit - Made by TISCO. Basic Engine Kit, less rod & main bearings with.030" o s pistons D4NN6108R. Order bearings separately. For 3600, (Part No: BEKF1763D-LCB) $309.95 Basic Overhaul Kit - Made by TISCO. Basic Engine Kit, less rod & main bearings with.040" o s pistons D4NN6108S. Order bearings separately. For 3600, (Part No: BEKF1764D-LCB) $309.95 Basic Overhaul Kit - Made by TISCO. Basic Engine Kit less bearings, with.040" oversize pistons. Order bearings separately. For 7000, 7600, 7700, (Part No: BEKF2584D-LCB) $483.04 Basic Overhaul Kit With Bearings - For 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains: pistons & sleeves, rings, pin & retainers, pin bushings, complete gasket kit. Rod and Main bearing sets (Specify size of: STD, .010, .020, .030, .040 in 'COMMENTS' when ordering). For Models: 2N, 8N, 9N. You need to specify the following in 'COMMENTS' when ordering: #1. Three or Four Ring Pistons; #2. Sleeve Wall Thickness (.040 or.090); #3. MAIN Bearing Size of STD, .010, .020, .030, .040. #4 ROD bearing Size of STD, .010, .020, .030, .040 . (Part No: OK120) $290.79 [Enlarge Picture] Basic Overhaul Kit, 120 Gas, 3-ring pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF103A-LCB) $213.87 [Enlarge Picture] Basic Overhaul Kit, 120 Gas, 3-ring pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF106A-LCB) $209.95 [Enlarge Picture] Basic Overhaul Kit, 120 Gas, 4-Ring Pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF105A-LCB) $218.09 [Enlarge Picture] Basic Overhaul Kit, 120 Gas, 4-ring Pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. (Part No: BEKF102A-LCB) $189.95 [Enlarge Picture] Basic Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-7 16" standard bore. Kit contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For Models: 2000, 501, 600, 601, 700, 701. (Part No: BEKF114A-LCB) $289.95 [Enlarge Picture] Basic Overhaul Kit, 158 Gas, .040 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .040" o s pistons D2NN6108, rings, complete gasket kit, pin bushings. Order bearings separately. For Models: 2000, 3000. (Part No: BEKF1584G-LCB) $513.60 [Enlarge Picture] Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains standard pistons, rings, pin bushings, complete gasket kit. For 2000. (Part No: BEKF1580D-LCB) $389.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic engine kit. Contains, .020" oversize pistons, rings, pin bushings, complete gasket kit. For 2000. (Part No: BEKF1582D-LCB) $348.60 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic engine kit. Contains, .030" oversize pistons, rings, pin bushings, complete gasket kit. For 2000. (Part No: BEKF1583D-LCB) $388.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic engine kit. Contains, .040" oversize pistons, rings, pin bushings, complete gasket kit. For 2000. (Part No: BEKF1584D-LCB) $388.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains, standard pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1590D-LCB) $358.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains, .020" oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1592D-LCB) $358.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains, .030" oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1593D-LCB) $358.95 Basic Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains, .040" oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1594D-LCB) $358.95 Basic Overhaul Kit, 158 Gas, .020 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .020" o s pistons C5NN6108H, rings, complete gasket kit, pin bushings. Order bearings separately. For Models: 2000, 3000. (Part No: BEKF1582G-LCB) $545.95 Basic Overhaul Kit, 158 Gas, Std Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit contains, standard pistons, rings, complete gasket kit, pin bushings. Bearings are available, must be ordered separately. For Models: 2000(1965-1975), 3000(1965-and up). (Part No: BEKF1580G-LCB) $535.97 Basic Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit contains, standard pistons, rings, pin bushings, complete gasket kit. Less rod & main bearings . Order bearings separately. For 2600, 3600. (Part No: BEKF1750G-LCB) $593.86 Basic Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .020" o s pistons C5NN6108H, rings, pin bushings, complete gasket kit. Order bearings separately. For 2600, 3600. (Part No: BEKF1752G-LCB) $478.95 Basic Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore. Basic Engine Kit, less rod & main bearings with.040" o s pistons D2NN6108D, rings, pin bushings, complete gasket kit. Order bearings separately. For 2600, 3600. (Part No: BEKF1754G-LCB) $479.95 Basic Overhaul Kit, 172 Diesel - Made by TISCO. 172 CID 4 cylinder diesel 3.6" standard bore. Basic engine kit contains, sleeves, pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For 4000 (1963-1964), 801, 901. (Part No: BEKF20-LCB) $439.99 Basic Overhaul Kit, 172 Gas, Overbore - Made by TISCO. 172 CID 4 cylinder gas 4.0" overbore. Basic engine kit contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit, Less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Part No: BEKF109-LCB) $411.33 Basic Overhaul Kit, 172 Gas, w/ Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9" standard bore. Basic engine kit contains, metal head gasket, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. less bearings. Engine bearings must be ordered separately. For 800, 900, 801, 901, 4000 (1963-1964). (Part No: BEKF115AM-LCB) $319.99 [Enlarge Picture] Basic Overhaul Kit, 172 Gas, w/ Non Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9" standard bore. Basic engine kit contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket set. less bearings. Engine bearings must be ordered separately. For 4000 ( 1963-1964), 801, 901, 800, 900. (Part No: BEKF115A-LCB) $319.99 Basic Overhaul Kit, 175 Diesel - Made by TISCO.175 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit less rod & main bearings with standard pistons D4NN6108L. Order bearings separately. For 3600. (Part No: BEKF1760D-LCB) $308.95 Basic Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .020" o s pistons D4NN6108N. Order bearings separately. For 3600. (Part No: BEKF1762D-LCB) $308.95 Basic Overhaul Kit, 175 Diesel, .020 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains, .020" o s pistons, rings, pin bushings, complete gasket kit. For Model: 3000. (Part No: BEKF1752D-LCB) $356.31 Basic Overhaul Kit, 175 Diesel, .030 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .030" o s pistons D4NN6108R. Order bearings separately. For Model: 3000. (Part No: BEKF1753D-LCB) $308.95 Basic Overhaul Kit, 175 Diesel, .040 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Basic Engine Kit, less rod & main bearings with .040" o s pistons D4NN6108S. Order bearings separately. For Model: 3000. (Part No: BEKF1754D-LCB) $309.95 Basic Overhaul Kit, 175 Diesel, Std Pistons - Made by TISCO. 175 CID 3 cylinder Diesel 4.2" standard bore. Basic Engine Kit. Contains, standard pistons, rings, pin bushings, complete gasket kit. For Model: 3000. (Part No: BEKF1750D-LCB) $269.95 Basic Overhaul Kit, 192 Gas - Made by TISCO. 192 CID 3 cylinder gas 4.4" standard bore, 4.2" stroke. Basic Engine Kit. Contains standard pistons, rings, pin bushings, complete gasket kit. For 4000 (1965-3 1968). (Part No: BEKF1920G-LCB) $389.95 Basic Overhaul Kit, 201 Diesel, (1965-5/1969), STD Pistons - Fits 201 CID 3 cylinder diesel standard bore 4.4". Kit contains std. pistons, rings, pin bushings, complete gasket kit. For Model: 4000 (1965-5 1969). (Part No: BEKF2010D-LCB) $328.95 Basic Overhaul Kit, 201 Diesel, (1965-5/1969),.020 Pistons - Made by TISCO. Basic Engine Kit, for 201 CID 3 cylinder diesel, standard bore 4.4", contains .020" pistons, rings, pin bushings, complete gasket kit. For model: 4000 (1965-5 1969). (Part No: BEKF2012D-LCB) $349.95 Basic Overhaul Kit, 201 Diesel, (1965-5/1969),.030 Pistons - Made by TISCO. Basic Engine Kit, 201 CID diesel 3 cylinder, standard bore 4.4", contains .030" pistons, rings, pin bushings, complete gasket set. For Model: 4000 (1965-5 1969). (Part No: BEKF2013D-LCB) $349.95 Basic Overhaul Kit, 201 Diesel, (1965-5/1969),.040 Pistons - Made by TISCO. Basic Engine Kit, 201 CID 3 cylinder diesel 4.4" standard bore, contains .040" pistons, rings, pin bushings, complete gasket kit. For Model: 4000 ( 1965-5 1969). (Part No: BEKF2014D-LCB) $349.95 Basic Overhaul Kit, 201 Diesel, (6/1969-1981), STD Pistons - Made by TISCO. Basic Engine Kit 201 CID 3 cylinder diesel 4.4" standard bore. Contains standard pistons, rings, pin bushings, complete gasket kit. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BEKF2020D-LCB) $308.95 Basic Overhaul Kit, 201 Diesel, (6/1969-1981),.020 Pistons - Made by TISCO. Basic Engine Kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains .020" pistons, rings, pin bushings, complete gasket kit. For 4000 ( 6 1969-1975), 4600 (1975-1981). (Part No: BEKF2022D-LCB) $279.95 Basic Overhaul Kit, 201 Diesel, (6/1969-1981),.030 Pistons - Made by TISCO. Basic Engine Kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains, .030" pistons, rings, pin bushings, complete gasket kit.For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BEKF2023D-LCB) $279.95 Basic Overhaul Kit, 201 Diesel, (6/1969-1981),.040 Pistons - Made by TISCO. Basic Engine Kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains, .040" pistons, rings, pin bushings, complete gasket kit. For 4000 (6 1969-1975), 4600 (1975-1981). (Part No: BEKF2024D-LCB) $279.95 Basic Overhaul Kit, 201 Gas - Basic Engine Overhaul Kit, 201 CID 3-CYL Gas 4.4in Std bore with 4.4in stroke, Standard Pistons (C7NN6108T). Made by TISCO. Kit includes Sleeves, pistons, rings, pins , retainers, overhaul gasket set. For 4000 (4-1968 to 1975), 4600 ( 1975 to 1981). (Part No: BEKF2010G-LCB) $348.95 Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (1965-3 1968), 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: BEKF2330D-LCB) $379.95 Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains .020" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 ( 1965-3 1968), 5600 (1975-9 1980), 5700(1975-9 1980). (Part No: BEKF2332D-LCB) $379.95 Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit, contains .030" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (1965-3 1968), 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: BEKF2333D-LCB) $456.90 Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit, contains .040" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000, 5600, 5700. (Part No: BEKF2334D-LCB) $456.90 Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons D4NN6108AA, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4 1968-1975), 5600 (10 1980-1981), 5700 (10 1980-1981), 6600(1975-9 1980), 6700 (1975-9 1980). (Part No: BEKF2560D-LCB) $395.04 Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit, less rod & main bearings with .020" o s pistons D4NN7108AC, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4 1968-1975), 5600 (10 1980-1981), 5700 (10 1980-1981), 6600(1975-9 1980), 6700 (1975-9 1980). (Part No: BEKF2562D-LCB) $474.14 Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit, less rod & main bearings with .030" o s pistons D4NN6108AD, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4 1968-1975), 5600 (10 1980-1981), 5700 (10 1980-1981), 6600(1975-9 1980), 6700 (1975-9 1980). (Part No: BEKF2563D-LCB) $474.14 Basic Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with standard pistons. Order bearings separately. For 7000 (10 1971-1975), 7600 (1975-9 1980), 7700 (1975-9 1980). (Part No: BEKF2580D-LCB) $483.04 Basic Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .020" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. In Frame Engine Kit, 268 Diesel Part_Desc: Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic kit contains, .030" oversized pistons, rings, valve grind gasket kit, oil pan gasket. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BEKF2582D-LCB) $483.04 Basic Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel. Basic Engine Kit less bearings, with .030" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: BEKF2583D-LCB) $485.04 Basic Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less bearings, with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BEKF42680D-LCB) $457.40 Basic Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less bearings, with .020" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BEKF42682D-LCB) $491.15 Basic Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less bearings, with .030" oversize pistons rings, pin bushings, complete gasket kit. Order bearings separately. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BEKF42683D-LCB) $491.15 Basic Overhaul Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less bearings, with .040" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BEKF42684D-LCB) $491.15 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BEKF2680D-LCB) $483.04 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .020" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BEKF2682D-LCB) $483.04 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .030" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BEKF2683D-LCB) $483.04 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .040" oversize pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: BEKF2684D-LCB) $483.04 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7610 (8 1987-3 1991), 7710 ( 1987-3 1991). (Part No: BEKF2690D-LCB) $635.50 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .020" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7610 (8 1987-3 1991), 7710 ( 1987-3 1991). (Part No: BEKF2692D-LCB) $635.50 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .030" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7610 (8 1987-3 1991), 7710 ( 1987-3 1991). (Part No: BEKF2693D-LCB) $635.50 Basic Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less bearings, with .040" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 7610 (8 1987-3 1991), 7710 ( 1987-3 1991). (Part No: BEKF2694D-LCB) $635.50 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 8000 (1968-1972). (Part No: BEKF4010D-LCB) $542.78 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .020" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 8000 (1968-1972). (Part No: BEKF4012D-LCB) $784.73 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .030" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 8000 (1968-1972). (Part No: BEKF4013D-LCB) $784.73 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .040" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 8000 (1968-1972). (Part No: BEKF4014D-LCB) $784.73 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons, rings, pin bushings, complete gasketkit. Order bearings separately. For 8000 (10 1972-7 1976), 8200 (10 1972-7 1976), 8600 (10 1972-7 1976). (Part No: BEKF4020D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .020" pistons, rings, pin bushings, complete gasketkit. Order bearings separately. For 8000 (10 1972-7 1976), 8200 (10 1972-7 1976), 8600 (10 1972-7 1976 (Part No: BEKF4022D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .030" pistons, rings, pin bushings, complete gasketkit. Order bearings separately. For 8000 (10 1972-7 1976), 8200 (10 1972-7 1976), 8600 (10 1972-7 1976). (Part No: BEKF4023D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .040" pistons, rings, pin bushings, complete gasketkit. Order bearings separately. For 8000 (10 1972-7 1976), 8200 (10 1972-7 1976), 8600 (10 1972-7 1976). (Part No: BEKF4024D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons, rings, pins & retainers, pin bushings, complete gasket kit, Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BEKF4030D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .020" pistons, rings, pins & retainers, pin bushings, complete gasket kit, Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BEKF4032D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .030" pistons, rings, pins & retainers, pin bushings, complete gasket kit, Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BEKF4033D-LCB) $765.68 Basic Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .040" pistons, rings, pins & retainers, pin bushings, complete gasket kit, Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: BEKF4034D-LCB) $765.68 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: BEKF4040D-LCB) $910.89 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .020" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: BEKF4042D-LCB) $910.89 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .030" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: BEKF4043D-LCB) $908.85 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .040" pistons, rings, pins & retainers, pin bushings, complete gasket kit. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: BEKF4044D-LCB) $1106.96 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BEKF4050D-LCB) $715.88 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .020" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BEKF4052D-LCB) $715.88 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .030" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BEKF4053D-LCB) $715.88 Basic Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with .040" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: BEKF4054D-LCB) $715.88 Comprehensive Overhaul Kit, 172 Gas - Made by TISCO. Complete Overhaul Kit less bearings. For 172 CID 4-cyl Gas Engine, 3.9" standard bore, with 3-ring Pistons on (1955 to 1964): 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. Contains complete gasket set, press-on camshaft gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit (sleeves, pistons, rings, pins, retainers), oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings sold separately (See Engine Bearings. (Part No: 800K-LCB) $479.95 Comprehensive Overhaul Kit - GUIDE - TO DETERMINE WHICH OF THE BELOW KITS YOU WILL NEED, YOU NEED TO KNOW THE FOLLOWING: (1) If your pistons have 3 or 4 rings per piston. (2) If your piston sleeve thickness is .040 or .090 inches. (3) If your oil pump gear is 3 4 or 9 16 inches wide. (4) If you have rotating or non-rotating exhaust valves - If your keepers or keys on the exhaust and intake valves are the same, you DO NOT have rotating valves. If your keepers or keys on the exhaust and intake valves are the different, you DO have rotating valves. Engine bearings can be ordered from our ENGINE BEARINGS category. (Part No: FORD COMP KIT) $0.00 Comprehensive Overhaul Kit, 120 Gas - 3 RING PISTONS, .090 SLEEVES, 3\4 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit. Contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket set, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for and additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-8H-LCB) $369.95 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 3 4" oil pump gear width, Complete engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-8T-LCB) $371.57 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 9 16" oil pump gear width. Complete engine kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For, 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-9H-LCB) $369.95 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 9 16" oil pump gear width. Complete engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pins, retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-9T-LCB) $372.65 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 3 4" oil pump gear width. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-8H-LCB) $389.95 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 3 4" gear width. Complete engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, guide retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carburetor kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-8T-LCB) $389.95 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore, 9 16" gear width. Complete engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, timing gear, intake & exhaust valves, springs, spring retainers, guides, guide retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, point & condenser, spark plugs, oil filter, basic carburetor kit. For 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-9T-LCB) $389.95 [Enlarge Picture] Comprehensive Overhaul Kit, 120 Gas, 4-ring Pistons, .090 Sleeves - 4 RING PISTONS, .090 SLEEVES, 9 16 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For, 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-9H-LCB) $436.96 [Enlarge Picture] Cylinder Head Overhaul Kit - Engine Valve Overhaul Kit. For Models: 2600, 3600, 4600. (Part No: VOKF175) $63.49 [Enlarge Picture] Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul For 5000 with ENGINE CID: 233 256``ENGINE CYL: 4``FUEL: Gas & Diesel (Part No: VOKF233) $87.41 [Enlarge Picture] Engine Overhaul Kit w\ New Crankshaft - Comprehensive Kit For the 134 cu. inch Gas Engine with 3.4375" bore, 7 16" Head Studs.Tractors 1953 to 1957. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top & Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front & Rear Seals. kit INCLUDES NEW CRANKSHAFT. For models: NAA, 600, 700. (Part No: EKMC123) $827.20 [Enlarge Picture] Engine Overhaul Kit w\ New Crankshaft - Comprehensive Kit For models: 1958 to 1964 501, 601, 701, 2000 with the 134 cu. inch Gas Engine w 3.4375" bore and 1 2" Head Studs. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top & Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front & Rear Seals. Kit INCLUDES NEW CRANKSHAFT. (Part No: EKMC124) $827.90 [Enlarge Picture] Engine Overhaul Kit w\ New Crankshaft - Comprehensive Kit For models: (1955 to 1964) 800, 900, 801, 901, 4000 up to 1964 with the 172 cu. inch Gas Engine 3.9" bore. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top & Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front & Rear Seals. Kit INCLUDES NEW CRANKSHAFT. (Part No: EKMC125) $859.90 [Enlarge Picture] Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Engine overhaul kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. For 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: EOK102-LCB) $300.59 [Enlarge Picture] Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Engine overhaul kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: EOK103-LCB) $279.95 [Enlarge Picture] Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Engine overhaul kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retaineres, guides & retainers, valve keys. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: EOK105-LCB) $279.95 [Enlarge Picture] Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Engine overhaul kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket set, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. For 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: EOK106-LCB) $279.95 [Enlarge Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit For 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000 With 134" Gas Engine and 3-ring Pistons, standard bore 3-7 16", Hex drive pump. Kit contains sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket set, rod & main bearings (available in Std., .001, .002, .010, .020 or.030), standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleve & piston kit, oil pump kit for a gear type pump, fan belt, carburetor repair kit, spark plugs, points and condenser. Please specify what size rod and main bearings you need in 'COMMENTS' section. (Part No: 600K) $548.79 Engine Overhaul Kit, 134 Gas - Made by TISCO. Overhaul Kit less bearings for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings. Intake & Exhaust Valves (plus guides, locks and springs). Order Engine Bearings separately. (Part No: EOK114-LCB) $409.87 [Enlarge Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-7 16" standard bore w slotted drive. Complete Overhaul Kit For NAA, Jubilee, Contains complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available, must be ordered separately. (Part No: NAAK-LCB) $449.95 Engine Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit For the following tractors that use 134 CID 4-cyl gas engine 3-ring pistons, and hex drive oil pump: 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000. Kit Contains sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available but NOT included in this kit. (Part No: 600K-LCB) $481.47 Engine Overhaul Kit, 158 Gas, .020 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Engine overhaul kit with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For Models: 2000, 3000. (Part No: EOKF1582G-LCB) $617.48 Engine Overhaul Kit, 158 Gas, Std Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. EOK with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For Models: 2000, 3000, 3600. (Part No: EOKF1580G-LCB) $655.46 Engine Overhaul Kit, 158 Gas, .040 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. EOK with .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For Models: 2000, 3000. (Part No: EOKF1584G-LCB) $617.48 Engine Overhaul Kit, 175 Diesel, .020 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .020" oversized pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 3000. (Part No: EOKF1752D-LCB) $405.90 Engine Overhaul Kit, 175 Diesel, .030 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .030" oversized pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 3000. (Part No: EOKF1753D-LCB) $405.90 Engine Overhaul Kit, 175 Diesel, .040 Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .040" oversized pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 3000. (Part No: EOKF1754D-LCB) $405.90 Engine Overhaul Kit, 175 Diesel, Std Pistons - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 3000. (Part No: EOKF1750D-LCB) $365.11 Engine Overhaul Kits - Made by TISCO. For models 4600 (1975-1981) with 201 CID DSL 3-CYL engine(4.4" STD Bore). Kit contains pistons, pins, retainers, rings, and pin bushings, Complete gasket set with front and rear crankshaft seals, camshaft bearings, connectnig rod bearings( specify bearing size in comments STD, .010, .020, .030, .040), Miain bearings(specify bearing sizes in comments STD, .010, .020, .030), Intake and exhaust valves(intake valve has a .003" O S stem). (Part No: EOKF2030D) $454.77 In Frame Engine Kit, 268 Diesel - Made by TISCO. 268 CID 4 cylinder diesel 4.4" standard bore. Basic kit contains, .030" oversized pistons, rings, valve grind gasket kit, oil pan gasket. For 6600 (10 1980-1981), 6610 (1981-7 1987), 6700 (10 1980-1981), 6710 (1981-7 1987). (Part No: BIFF42683D) $381.16 In Frame Engine Overhaul Kit - Made by TISCO. For 5600, 5700 all 1975-9 1980, 233 CID Diesel, 4 cylinder, 4.2" bore. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK196) $620.56 In Frame Engine Overhaul Kit - Made by TISCO. For 5000 4 1968-1975 256 CID Diesel, 4 cylinder, 4.4" bore. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK256) $588.47 In Frame Engine Overhaul Kit - Made by TISCO. For (5600, 5700 all 10 1980-1981), (6600, 6700 all 1975 to 9 1980) all with 256 CID Diesel, 4 cylinder 4.4" bore. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK197) $588.47 In Frame Engine Overhaul Kit - Made by TISCO. For (7000 10 1971-1975), (7600, 7700, all 1975-1980) all with 256 CID Turbo Diesel, 4 cylinder, 4.4" bore and 1.410" length rod bearings. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Rod Bearing size of Standard, .010, .020, or.030. (Part No: BIFF258xD) $472.69 In Frame Engine Overhaul Kit - Made by TISCO. For (7600, 7700, all 10 1980-1981), (7610, 7710, all 1981-7 1987) all 268 CID Turbo Diesel, 4 cylinder, 4.4" bore, 1.41" length rod bearings. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, or.030. (Part No: IK200) $629.00 In Frame Engine Overhaul Kit - Made by TISCO. For 7610, 7710, all 8 1987-3 1991 all with 268 CID Turbo Diesel, 4 cylinder, 4.4" bore and 1.41" length rods. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, or.030. (Part No: IK203) $763.84 In Frame Engine Overhaul Kit - Made by TISCO. For 8000 1968-9 1972 with 401 CID Diesel, 6 cylinder, 4.4" bore, 1 2" diameter head bolts. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK204) $928.26 In Frame Engine Overhaul Kit - Made by TISCO. For 8000, 8200, 8600, all 10 1972-7 1976 with 401 CID Diesel, 6 cylinder, 4.4" bore and 1 2" diameter head bolts. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK205) $515.51 In Frame Engine Overhaul Kit - Made by TISCO. For (8700 8 1976-1978), (TW10 1979-1982) all with 401 CID Diesel, 6 cylinder, 4.4" bore and 9 16" diameter head bolts. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK342) $758.27 In Frame Engine Overhaul Kits - Made by TISCO. For (6600, 6700, all 10 1980-1981), (6610, 6710 all 1981-7 1987), all 268 CID Non-Turbo Diesel, 4 cylinder, 4.4" bore. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK199) $621.96 In Frame Overhaul Kit, 134 GAS - Made by TISCO. For NAA, Jublee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57. Includes: Super power set 3 1 2" overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF110M) $299.95 In Frame Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-1 2" overbore. Kit contains, sleeves, pistons, rings, pins & retainers, valve grind gasket set, oil pan gasket. For Models: 2000, 501, 600, 601, 700, 701. (Part No: BIFF110) $299.95 In Frame Overhaul Kit, 158 Gas, .020 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For Models: 2000, 3000. (Part No: BIFF1582G) $519.12 In Frame Overhaul Kit, 158 Gas, .040 Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic in-frame kit with .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For Models: 2000, 3000. (Part No: BIFF1584G) $474.55 In Frame Overhaul Kit, 158 Gas, Std Pistons - Made by TISCO. 158 CID 3 cylinder gas 4.2" standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For Models: 2000, 3000. (Part No: BIFF1580G) $519.12 In-Frame Engine Kit - Made by TISCO. For 2600 Series, 3600 Series, both with 158 & 175 CID gas 3 cylinder engine 4.2" standard bore 3.8" stroke. Contains: pistons with pins, rings, upper gasket set, head gasket, carburetor base gasket and oil pan gasket. Specify Piston size of Standard, .020" oversize or.040" oversize in comments section when ordering. (Part No: BIFF175xG) $522.07 In-Frame Engine Kit - Made by TISCO. For 2600 series tractors with 158 CID Diesel 3 cylinderr 4.2" standard bore engines 1975-1981. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF159xD) $355.45 In-Frame Engine Kit - Made by TISCO. For 3600 series with 175 CID diesel 3 cylinder 4.2" standard bore 1975-81. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF176xD) $370.93 In-Frame Engine Kit - Made by TISCO. For 5000 series with 233 CID diesel 4 cylinder engine 4.2" standard bore 1965-3 1968, 5600, 5700 series 1975-9 1980. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF233xD) $376.07 In-Frame Engine Kit - Made by TISCO. For 5000 series 4 1968-75, 5600, 5700 series 10 1980-81, 6600, 6700 series 1975-9 80, all with 256 CID diesel 4 cylinder 4.4" standard bore engine. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF256xD) $381.16 In-Frame Engine Kit - Made by TISCO. For 7610, 7710 series 8 1987-3 1991 all with 268 CID turbo diesel 4 cylinder engine 4.4" standard bore. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF269xD) $580.46 In-Frame Engine Kit - Made by TISCO. For 8000 series with 401 CID diesel 65 cylinder 4.4" standard bore engine 168-9 1972. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF401xD) $784.82 In-Frame Engine Kit - Made by TISCO. For 8000, 8200, 8600 series, all with 401 CID diesel 6 cylinder 4.4" standard bore 10 1972-7 1976. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF402xD) $761.49 In-Frame Engine Kit - Made by TISCO. For 8700 series with 401 CID diesel 6 cylinder 4.4" standard bore engine 8 1976-1978, TW10 series 1979-1982. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF403xD) $798.49 In-Frame Engine Kit - Made by TISCO. For 9700 series 8 1976-1978, TW20, TW30 series 1979-1982, all with 401 CID turbo diesel 6 cylinder diesel 4.4" standard bore engines. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF405xD) $798.49 In-Frame Engine Kit, 134 Gas - Made by TISCO. For NAA, Jubilee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57, 3-7 16" standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set w head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF114AM) $349.95 [Enlarge Picture] In-Frame Engine Kit, 134 Gas - Made by TISCO. For 501, 601, 701, 2000, all with 134 CID 4 cylinder gas 3-7 16" standard bore. Kit contains, sleeves, pistons, rings, pins & retainers, Valve grind gasket set, oil pan gasket kit. For Models: 2000, 501, 600, 601, 700, 701. (Part No: BIFF114A) $249.95 In-Frame Overhaul Kit, 175 Diesel - Made by TISCO. For 3000 Series with 175 CID diesel 3 cylinder 4.2" standard bore 1965-75. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF175xD) $286.11 Lucas Assembly Lube - Lucas Assembly Lube (8 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $10.00 [Enlarge Picture] Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 2600 With 158" Engine Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF1590D) $527.45 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 3600 With 175" Engine Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF1760D) $477.51 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 4600 With 201 Engine Contains complete gasket set, valve springs and keys, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camshaft bearings, intake and exhaust valves. ***PLEASE SPECIFY PISTON, MAIN & ROD BEARING SIZES IN COMMENT SECTION*** (Part No: EOKF203xD) $426.70 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5000 With 233" Engine (1965-3 1968) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF2330D) $562.14 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5000 With 256" Engine (4 1968-1975) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF2560D) $555.60 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5600, 5700 With 233" Engine (1975-9 1980) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF2340D) $562.14 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5600, 5700 (10 1980-1981), 6600, 6700 (1975-9 1980) With 256" Engine Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camsahft bearings. Additional charge for.040 Oversize Pistons. (Part No: EOKF2570D) $569.90 Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Dexta with 3-cyl 144 or 152 Perkins engines. For 1962 and prior, with no lip on sleeves. Contains complete gasket set, pistons, liners & ring sets, rod bearings (available in Std., .010, .020, or .030), & main bearings (available in Std., .010, .020, or.030 ), intake and exhaust valves, springs, guides and locks. (Part No: 152DK) $435.72 Overhaul Kit, Less Bearings - Made by TISCO. Complete Overhaul Kit For Dexta with 3-cyl 144 or 152 Perkins engines. Converts bore to 3.6 Inch. For 1962 and prior with no lip on sleeve. Contains: Piston & liner kit, rings, intake and exhaust valves, springs, guides and locks. Same parts as 152DK except less bearings. (Part No: 152DK-LCB) $430.68 Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings, Main & Rod Bearings. Intake & Exhaust Valves (plus guides, locks and springs). Available with Std, .010, .020 or.030 Engine bearings. (Part No: EOK114) $486.47 [Enlarge Picture] Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2000. (Part No: EOKF1580D-LCB) $474.82 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2000. (Part No: EOKF1582D-LCB) $474.82 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2000. (Part No: EOKF1583D-LCB) $474.82 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2000. (Part No: EOKF1584D-LCB) $474.82 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains, standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1590D-LCB) $453.34 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains, .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1592D-LCB) $453.34 Overhaul Kit, 158 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains, .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1594D-LCB) $453.34 Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore. Engine overhaul kit with standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1750G-LCB) $611.23 Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas. Engine overhaul kit with .020" oversize pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. Less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1752G-LCB) $611.23 Overhaul Kit, 158, 175 Gas - Made by TISCO. 158 or 175 CID 3 cylinder gas 4.2" standard bore. Engine overhaul kit with .040" oversize pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1754G-LCB) $611.23 Overhaul Kit, 159 Diesel - Made by TISCO. 158 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains, .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1593D-LCB) $453.34 Overhaul Kit, 172 Diesel - Made by TISCO. Complete Overhaul Kit For 800, 900, 4000 With 172" Diesel Engine with 5-ring Pistons. Contains Sleeve & Piston Kit, Complete Gasket Set, Connecting Rod Bushings & Bearings, Center, Front & Rear Main Bearings, And Intake & Exhaust Valves (plus guides, locks and springs). Available with Std., .001, .002..010, .020 or.030 bearings. (Part No: 172DK) $677.50 Overhaul Kit, 172 Diesel - Made by TISCO. 172 CID 4 cylinder diesel 3.6" standard bore. Kit contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit, fuel injector seals, intake & exhaust valves, springs, guides, valve keys. Bearings are available, must be ordered separately. For Models: 801, 901, 4000(1963-1964). (Part No: 172DK-LCB) $620.35 Overhaul Kit, 172 Gas - Made by TISCO. Complete Overhaul Kit For 800, 801, 900, 901, 4000 (1955-1964). With 172" Gas Engine with 3-ring Pistons. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set). Basic Gasket Set. Connecting Rod Bushings & Bearings. Center, Front & Rear Main Bearings. Intake & Exhaust Valves (plus guides, locks and springs). Available with Std., .001, .010, .020 or.030 bearings. (Part No: EOK115) $449.85 Overhaul Kit, 172 Gas - Made by TISCO. Overhaul Kit For 800, 801, 900, 901, 4000 (1955-1964). With 4-cyl 172 Gas Engine with 3-ring Pistons. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set). Basic Gasket Set. Intake & Exhaust Valves (plus guides, locks and springs). Bearings sold separately. (Part No: EOK115-LCB) $371.41 Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 3600. (Part No: EOKF1760D-LCB) $403.41 Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 3600. (Part No: EOKF1762D-LCB) $403.41 Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 3600. (Part No: EOKF1763D-LCB) $453.34 Overhaul Kit, 175 Diesel - Made by TISCO. 175 CID 3 cylinder diesel 4.2" standard bore. Engine overhaul kit. Contains .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 3600. (Part No: EOKF1764D-LCB) $403.41 Overhaul Kit, 192 Gas - Made by TISCO. 192 CID 3 cylinder gas 4.4" standard bore, 4.2" stroke. Engine overhaul kit. Contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. For 4000 (1965-3 1968). (Part No: EOKF1920G-LCB) $504.74 Overhaul Kit, 201 Diesel - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Engine overhaul kit with standard pistons less bearings. Order bearings seperately. For 4600. (Part No: EOKF2030D-LCB) $375.77 Overhaul Kit, 201 Diesel - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020 oversize pistons, less bearings. Order bearings separately. For 4600 (Part No: EOKF2032D-LCB) $375.77 Overhaul Kit, 201 Diesel - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Engine overhaul kit with.030 oversize pistons, less bearings. Order bearings separately. For 4600 (Part No: EOKF2033D-LCB) $375.77 Overhaul Kit, 201 Diesel - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Engine overhaul kit with.040 oversize pistons, less bearings. Order bearings separately. For 4600 (Part No: EOKF2034D-LCB) $375.77 Overhaul Kit, 201 Diesel - Made by TISCO. Complete Overhaul Kit For Diesel 4000 With 201" Engine (1965-5 1969) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize ), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030 ), standard camshaft bearings, intake and exhaust valves. (Part No: EOKF2010D) $478.88 Overhaul Kit, 201 Diesel, (1965-5/1969), STD Pistons - Made by TISCO. 201 CID 3 cylinder diesel, standard bore 4.4". Kit contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 4000 (1965-5 1969). (Part No: EOKF2010D-LCB) $449.46 Overhaul Kit, 201 Diesel, (1965-5/1969),.020 Pistons - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Contains .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 4000 (1965-5 1969). (Part No: EOKF2012D-LCB) $449.46 Overhaul Kit, 201 Diesel, (1965-5/1969),.030 Pistons - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Contains .030" pistons, rings, complete gasket set, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 4000 (1965-5 1969). (Part No: EOKF2013D-LCB) $449.46 Overhaul Kit, 201 Diesel, (1965-5/1969),.040 Pistons - Made by TISCO. 201 CID 3 cylinder diesel 4.4" standard bore. Contains .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Model: 4000 (1965-5 1969). (Part No: EOKF2014D-LCB) $449.46 Overhaul Kit, 201 Diesel, (6/1969-1981), STD Pistons - Made by TISCO. Engine overhaul kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains, standard pistons, rings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. For Models: (4000 6 1969-1975), (4600 1975-1981). (Part No: EOKF2020D-LCB) $382.45 Overhaul Kit, 201 Diesel, (6/1969-1981),.020 Pistons - Made by TISCO. Engine overhaul kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Models: (4000 6 1969-1975), (4600 1975-1981).. (Part No: EOKF2022D-LCB) $382.45 Overhaul Kit, 201 Diesel, (6/1969-1981),.030 Pistons - Made by TISCO.Engine overhaul kit, 201 CID 3 cylinder diesel. Contains .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Models: (4000 6 1969-1975), (4600 1975-1981). (Part No: EOKF2023D-LCB) $382.45 Overhaul Kit, 201 Diesel, (6/1969-1981),.040 Pistons - Made by TISCO. Engine overhaul kit, 201 CID 3 cylinder diesel 4.4" standard bore. Contains .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Models: (4000 6 1969-1975), (4600 1975-1981). (Part No: EOKF2024D-LCB) $382.45 Overhaul Kit, 201 Gas - Made by TISCO. 201 CID 3 cylinder gas 4.4" standard bore. Engine overhaul kit. Contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. For 4000 (4 1968-1975). (Part No: EOKF2010G-LCB) $445.05 Overhaul Kit, 201 Gas - Made by TISCO. 201 CID 3 cylinder gas 4.4" standard bore. Engine overhaul kit. Contains standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake & exhaust valves, springs, valve keys. (Part No: EOKF2020G-LCB) $461.58 Overhaul Kit, 201 Gas - Made by TISCO. For Model: 4000 (4-1968 to 1975), all with 201 CID gas 3 cylinder engine, 4.4 inch STD Bore, and 4.4 inch Stroke. This kit contains Pistons, Piston Pins, Piston Retainers, Piston Rings, Piston Pin Bushings, Camshaft bearings, Complete gasket set, Front and Rear Crankshaft seals, STD intake valves, STD exhaust valves, Connecting Rod Bearings(specify sizes in comment section STD, .010, .020, .030, .040), Main Bearings(specify sizes in comment section STD, .010, .020, .030). (Part No: EOKF2010G) $519.16 Overhaul Kit, 220 Diesel w/ Bearings - Made by TISCO. For Models: Super Major, Power Major Diesel with 220 CID 4 cylinder diesel engine. Sleeves have large OD flange 4.706”(2 sleeve seals per sleeve), 3-15 16" bore size and 1.375" wrist pins. Kit includes sleeve & piston set, full gasket set, Rod & Main Bearings, and pin bushings, intake & exhaust valves, springs, guides. Specify Rod & Main bearing size: Standard, .010, .020 or .030. (Part No: FMDK3) $861.00 Overhaul Kit, 220 Diesel w/ Bearings - Made by TISCO. Complete Overhaul Kit. For Models: Major, Super Major with 1.25 wrist pins, 3-15 16" bore size, 4.622" sleeve flange OD. Contains overhaul gasket set, rod bearings (STD, .010, .020, and.030), main bearings (STD, .010, .020, and.030), valves, valve guides, valve springs, and piston, sleeves, sleeve seals (1 per sleeve), rings, pins and retainers. (Part No: FMDK1) $861.80 Overhaul Kit, 220 Diesel w/ Bearings - Made by TISCO. Complete Overhaul Kit. For Models: Major, Super Major with 1.375 wrist pins, 4.622" sleeve flange OD and 3-15 16" bore size. Contains overhaul gasket set, rod bearings (STD, .010, .020, and.030), main bearings (STD, .010, .020, and.030), valves, valve guides, valve springs, and sleeve, pistons, sleeve seals (1 per sleeve), rings, pins and retainers. (Part No: FMDK2) $858.76 Overhaul Kit, 220 Diesel w/o Bearings - Made by TISCO. Complete Overhaul Kit For Models: Major, Super Major with 1.25 wrist pins, 3-15 16" bore size and 4.622" sleeve flange OD. Engine has 1 seal per sleeve. Contains same parts as FMDK1 less bearings. (Part No: FMDK1-LCB) $709.43 Overhaul Kit, 220 Diesel w/o Bearings - Made by TISCO. Complete Overhaul Kit For Models: Major, Super Major with 1.375 wrist pins, 4.622" sleeve flange OD and 3-15 16" bore size. Kit contains, sleeve, sleeve seals (1 per sleeve), pistons, rings, pins & retainers, complete gasket kit, intake & exhaust valves, springs, guides. Bearings are available, must be ordered separately. (Part No: FMDK2-LCB) $765.96 Overhaul Kit, 220 Diesel w/o Bearings - Made by TISCO. 220 CID 4 cylinder diesel 3-15 16" standard bore. Complete Overhaul Kit For Super Major, Power Major w 1.375 wrist pins and sleeve flange OD of 4.706. Kit contains, sleeves, sleeve seals (2 seals per sleeve), pistons, rings, pins & retainers, complete gasket kit, intake & exhaust valves, springs, guides. Bearings are available, must be ordered separately. (Part No: FMDK3-LCB) $707.68 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 5000. (Part No: EOKF2330D-LCB) $524.11 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000. (Part No: EOKF2332D-LCB) $524.11 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000, (Part No: EOKF2333D-LCB) $524.11 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000. (Part No: EOKF2334D-LCB) $526.24 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Less bearings. Order bearings separately. For 5600, 5700. (Part No: EOKF2340D-LCB) $515.82 Overhaul Kit, 233 Diesel - Made by TISCO. 233 4 cylinder diesel 4.2" standard bore. Engine overhaul kit with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: EOKF2342D-LCB) $515.82 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. EOK with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: EOKF2343D-LCB) $515.82 Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit with .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5600 (1975-9 1980), 5700 (1975-9 1980). (Part No: EOKF2344D-LCB) $515.82 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overahaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5000(4 1968-1975). (Part No: EOKF2560D-LCB) $538.99 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 5000(4 1968-1975). (Part No: EOKF2562D-LCB) $538.99 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 5000(4 1968-1975). (Part No: EOKF2563D-LCB) $538.99 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit contains, standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For Models: 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: EOKF2570D-LCB) $491.14 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: EOKF2572D-LCB) $578.03 Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5600 10 1980-1981), 5700 10 1980-1981), 6600 (1975-9 1980), 6700 (1975-9 1980). (Part No: EOKF2573D-LCB) $584.80 Overhaul Kit, 256 Trubo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: EOKF2582D-LCB) $590.52 Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: EOKF2580D-LCB) $590.52 Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel. Engine overhaul kit less bearings, with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: EOKF2583D-LCB) $590.52 Overhaul Kit, 256 Turbo Diesel - Made by TISCO. 256 CID 4 cylinder turbocharged diesel. Engine overhaul kit less bearings, with .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7000 (10 1971-1975) 7600 (1975-9 1980) 7700 (1975-9 1980). (Part No: EOKF2584D-LCB) $590.52 Overhaul Kit, 268 Diesel - Made by TISCO. Complete Overhaul Kit For 6600, 6700 (10 1980-1981), 6610, 6710 (1981-7 1987) With 268 CID 4 cylinder diesel 4.4" standard bore Engine Contains complete gasket set, piston & ring set with .020 OVERSIZE pistons and rings, standard camsahft bearings, intake and exhaust valves. MAIN AND ROD BEARINGS SOLD SEPERATELY (Part No: EOKF42682D-LCB) $578.03 Overhaul Kit, 268 Diesel - Made by TISCO. Complete Overhaul Kit For 6600, 6700 (10 1980-1981), 6610, 6710 (1981-7 1987) With 268 CID 4 cylinder diesel 4.4" standard bore Engine Contains complete gasket set, piston & ring set with .030 OVERSIZE pistons and rings, standard camsahft bearings, intake and exhaust valves. MAIN AND ROD BEARINGS SOLD SEPERATELY (Part No: EOKF42683D-LCB) $584.80 Overhaul Kit, 268 Diesel - Made by TISCO. Complete Overhaul Kit For 6600, 6700 (10 1980-1981), 6610, 6710 (1981-7 1987) With 268 CID 4 cylinder diesel 4.4" standard bore Engine Contains complete gasket set, piston & ring set with .040 OVERSIZE pistons and rings, standard camsahft bearings, intake and exhaust valves. MAIN AND ROD BEARINGS SOLD SEPERATELY (Part No: EOKF42684D-LCB) $584.80 Overhaul Kit, 268 Diesel - Made by TISCO. Complete Overhaul Kit For 6600, 6700 (10 1980-1981), 6610, 6710 (1981-7 1987) With 268 CID 4 cylinder diesel 4.4" standard bore. Engine Contains complete gasket set, piston & ring set with STANDARD pistons and rings, standard camsahft bearings, intake and exhaust valves. MAIN AND ROD BEARINGS SOLD SEPERATELY. (Part No: EOKF42680D-LCB) $584.80 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: EOKF2680D-LCB) $588.54 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: EOKF2682D-LCB) $590.52 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: EOKF2683D-LCB) $656.07 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit less bearings, with .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 7600 (10 1980-1981), 7610 (1981-7 1987), 7700 (10 1980-1981), 7710 (1981-7 1987). (Part No: EOKF2684D-LCB) $588.53 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit. less bearings, with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: EOKF2690D-LCB) $738.71 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit. less bearings, with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: EOKF2692D-LCB) $693.07 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit. less bearings, with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: EOKF2693D-LCB) $738.71 Overhaul Kit, 268 Turbo Diesel - Made by TISCO. 268 CID 4 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit. less bearings, with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 7610 (8 1987-3 1991), 7710 (8 1987-3 1991). (Part No: EOKF2694D-LCB) $693.07 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 8000 (1968-9 1972). (Part No: EOKF4010D-LCB) $676.51 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 8000 (1968-9 1972). (Part No: EOKF4012D-LCB) $919.13 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 8000 (1968-9 1972). (Part No: EOKF4013D-LCB) $919.13 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 8000 (1968-9 1972). (Part No: EOKF4014D-LCB) $919.13 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kits with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8000, 8200, 8600, all built between (10 1972-7 1976). (Part No: EOKF4020D-LCB) $709.01 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kits with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8000, 8200, 8600, all built between (10 1972-7 1976). (Part No: EOKF4022D-LCB) $973.53 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kits with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8000, 8200, 8600, all built between (10 1972-7 1976). (Part No: EOKF4023D-LCB) $973.52 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kits with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8000, 8200, 8600, all built between (10 1972-7 1976). (Part No: EOKF4024D-LCB) $1116.97 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: EOKF4030D-LCB) $978.24 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: EOKF4032D-LCB) $968.78 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: EOKF4033D-LCB) $978.24 Overhaul Kit, 401 Diesel - Made by TISCO. 401 CID 6 cylinder diesel 4.4" standard bore. Engine overhaul kit with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 8700 (8 1976-1978), TW10 (1979-1982). (Part No: EOKF4034D-LCB) $1192.61 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul Kit less rod & main bearings with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: EOKF4040D-LCB) $1161.43 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul Kit less rod & main bearings with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: EOKF4042D-LCB) $1161.43 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul Kit less rod & main bearings with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: EOKF4043D-LCB) $1516.33 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul Kit less rod & main bearings with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 9000 (6 1972-7 1976), 9200 (6 1972-7 1976), 9600 (6 1972-7 1976). (Part No: EOKF4044D-LCB) $1161.43 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less rod & main bearings. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: EOKF4050D-LCB) $894.96 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit with .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less rod & main bearings. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: EOKF4052D-LCB) $894.96 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit with .030" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less rod & main bearings. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: EOKF4053D-LCB) $894.96 Overhaul Kit, 401 Turbo Diesel - Made by TISCO. 401 CID 6 cylinder turbocharged diesel 4.4" standard bore. Engine overhaul kit with .040" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less rod & main bearings. Order bearings separately. For 9700 (8 1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Part No: EOKF4054D-LCB) $991.02 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 5000, 5600, 5700, 6600, 6700. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK679) $560.75 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 8000. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK680) $751.18 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 8000, 8200, 8600, 8700, TW10. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK681) $755.19 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 9000, 9200, 9600. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK682) $892.74 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 9700, TW20, TW30. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK683) $891.09 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 7000, 7600, 7700, (Part No: RBK684) $570.83 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 7600, 7610, 7700, 7710, (Part No: RBK685) $570.83 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 7610, 7710, (Part No: RBK686) $654.56 Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 6600, 6610, 6700, 6710, (Part No: RBK687) $560.38 Rebore Kit - 4.400 Bore For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3352) $369.60 Rebore Kit - .020 Oversize For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3353) $369.60 Rebore Kit - .030 Oversize. For Models: 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine. (Part No: R3354) $369.60 Rebore Kit - .040 Oversize For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3355) $369.60 Rebore Kit - 4.400 Bore For 7000, 7500, 7600, 7700 with 256 Turbo Diesel Engine (Part No: R3356) $369.60 Rebore Kit - .020 Oversize For 7000, 7500, 7600, 7700 with 256 Turbo Diesel Engine (Part No: R3357) $369.60 Rebore Kit - .040 Oversize For 7000, 7500, 7600, 7700 with 256 Turbo Diesel Engine (Part No: R3358) $369.60 Rebore Kit - 4.400 Bore For 6600, 6610 with BSD444 Diesel Engine with 2.682 Compression Distance (Part No: R3363) $369.60 Rebore Kit - .020 Oversize For 6600, 6610 with BSD444 Diesel Engine with 2.682 Compression Distance (Part No: R3364) $369.60 Rebore Kit - .030 Oversize For 6600, 6610 with BSD444 Diesel Engine with 2.682 Compression Distance (Part No: R3365) $369.60 Rebore Kit - .040 Oversize For 6600, 6610 with BSD444 Diesel Engine with 2.682 Compression Distance (Part No: R3366) $369.60 Rebore Kit - 4.400 Bore For 7710 with BSD444 Turbo Diesel Engine (Part No: R3359) $369.60 Rebore Kit - .020 Oversize For 7710 with BSD444 Turbo Diesel Engine (Part No: R3360) $369.60 Rebore Kit - .030 Oversize For 7710 with BSD444 Turbo Diesel Engine (Part No: R3361) $369.60 Rebore Kit - .040 Oversize For 7710 with BSD444 Turbo Diesel Engine (Part No: R3362) $369.60 Rebore Kit - 4.400 Bore For 8000, 8600, 8700, TW10 with 401 Diesel Engine (Part No: R3367) $554.40 Rebore Kit - .020 Oversize For 8000, 8600, 8700, TW10 with 401 Diesel Engine (Part No: R3368) $634.56 Rebore Kit - .030 Oversize For 8000, 8600, 8700, TW10 with 401 Diesel Engine (Part No: R3369) $634.56 Rebore Kit - .040 Oversize For 8000, 8600, 8700, TW10 with 401 Diesel Engine (Part No: R3370) $634.56 Rebore Kit - 4.400 Bore For 9000, 9600, TW20, TW30, TW35 with 401 Turbo Diesel Engine (Part No: R3371) $634.56 Rebore Kit - .020 Oversize For 9000, 9600, TW20, TW30, TW35 with 401 Turbo Diesel Engine (Part No: R3372) $634.56 Rebore Kit - .030 Oversize For 9000, 9600, TW20, TW30, TW35 with 401 Turbo Diesel Engine (Part No: R3373) $634.56 Rebore Kit - .040 Oversize For 9000, 9600, TW20, TW30, TW35 with 401 Turbo Diesel Engine (Part No: R3374) $634.56 Rebore Kit - 4.400 Bore For 7810, 7910, 8210, TW5 with BSD666 Diesel Engine (Part No: R3367) $554.40 Rebore Kit - .020 Oversize For 7810, 7910, 8210, TW5 with BSD666 Diesel Engine (Part No: R3368) $634.56 Rebore Kit - .030 Oversize For 7810, 7910, 8210, TW5 with BSD666 Diesel Engine (Part No: R3369) $634.56 Rebore Kit - .040 Oversize For 7810, 7910, 8210, TW5 with BSD666 Diesel Engine (Part No: R3370) $634.56 Rebore Kit, .020 Pistons - .020 Oversize For Models: 3000, 3600 with 175 Diesel Engine. (Part No: R3345) $277.20 Rebore Kit, .040 Pistons - .040 Oversize. For Models:3000, 3600 with 175 Diesel Engine. (Part No: R3346) $277.20 Rebore Kit, 172 Diesel - For Models: 800, 900, 4000. All with 172 diesel engine, non sleeved. Available in std., .020, .030, .040. (Part No: RK172D) $644.28 Rebore Kit, 172 Gas - 3.90 INCH.020 Oversize. For Models: 800, 900, 4000 with 172 Gas, Non-Sleeved Engine. (Part No: R3337) $168.96 Rebore Kit, 172 Gas, STD - 3.900 INCH Bore For 800, 900, 4000 with 172 Gas, Non-Sleeved Engine. (Part No: R3336) $164.68 Rebore Kit, 172 Gas,.030 - 3.90 INCH BORE, .030 Oversize For 800, 900, 4000 with 172 Gas, Non-Sleeved Engine (Part No: R3338) $168.96 Rebore Kit, 172 Gas,.040 - 3.90 INCH .040 Oversize For 800, 900, 4000 with 172 Gas, Non-Sleeved Engine. (Part No: R3339) $168.96 Rebore Kit, 192 Gas, STD - 4.400 Bore For 4000 with 192 Gas Engine (Part No: R3341) $413.46 Rebore Kit, 192 Gas,.040 - .040 Oversize For 4000 with 192 Gas Engine. (Part No: R3342) $413.46 Rebore Kit, 201 Diesel - Made by TISCO. Re-bore sleeve & piston kit For 4000 (1965-and up), 4600(1975 and up), using 3 CYL 201 CID 4.4 inch bore non-turbo DSL and turbo DSL engines. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK678) $449.79 Rebore Kit, 201 Diesel, STD - 4.400 Bore. For Models: 4000, 4600 with 201 Diesel Engine with 2.682 Compression Distance. (Part No: R3347) $277.20 Rebore Kit, 201 Diesel, .030 - Oversize .030 For Models: 4000, 4600 with 201 Diesel Engine with 2.682 Compression Distance (Part No: R3349) $277.20 Rebore Kit, 201 Diesel,.020 - Oversize .020. For Models: 4000, 4600 with 201 Diesel Engine with 2.682 Compression Distance. (Part No: R3348) $277.20 Rebore Kit, 201 Diesel,.040 - Oversize .040 For Models: 4000, 4600 with 201 Diesel Engine with 2.682 Compression Distance. (Part No: R3350) $317.27 Rebore Kit, 201 Gas - 4.400 Bore. For Model: 4000 with 201 Gas Engine. (Part No: R3343) $380.00 Rebore Kit, Std. Pistons - 4.200" Bore. For Models: 3000, 3600 with 175 Diesel Engine (Part No: R3344) $277.20 Valve Overhaul Kit - Made by TISCO. For servicing one engine when valve replacement is necessary. For 9N, 2N, 8N with solid guides, free-rotating exhaust valves. Kit contains intake valves, exhaust valves, valve springs and keys, solid type valve guides and rotating valve kit. (Part No: VOKF928NFR) $155.00 [Enlarge Picture] Valve Overhaul Kit - Made by TISCO. Fits 9N, 2N& 8N that use solid valve guides and have NON-rotating exhaust valves. Includes Intake & exhaust valves, springs, keys, and guides. (Part No: VOKF928N) $126.32 [Enlarge Picture] Valve Overhaul Kit - Made by TISCO. For Servicing one engine when valve replacement is necessary. For Fordson Models: Dexta, Super Dexta. (Part No: VOKP152) $80.71 Valve Overhaul Kit - Made by TISCO. For Servicing one engine when valve replacement is necessary. For DIESEL 801, 901, 4000, (1958 TO 1964) (Part No: VOKF172D) $134.22 [Enlarge Picture] Valve Overhaul Kit - Made by TISCO. For Servicing one engine when valve replacement is necessary. For FORDSON MAJOR (1953 TO 1964) (Part No: VOKF220) $154.26 Valve Overhaul Kit - Made by TISCO. For Fordson Major, Super Major with 220 CID 4 Cylinder Diesel. Valve Overhaul Kit includes Complete Sets of Exhaust Valves 723F6505ABA, Intake Valves DDN6507, Valve Guides DDN6510A, Valve Springs DKN6513B. (Part No: Major-ValveKit) $158.33 Valve Overhaul Kit, 158 Gas, 192 Gas, 201 Gas or Diesel, Std. Valve Stem - Made by TISCO. For Models: 2000, 3000(With 158 CID 3-Cylnder gas 4.2" STD bore), 4000(With 192 CID gas and 201 CID gas or diesel 3-Cylinder Engines, 4.4" STD bore). This valve kit contains Intake Valves(STD), Exhaust valves(STD), Valve springs, and Valve keys. (Part No: VOKF158) $63.49 [Enlarge Picture] Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, .003 O/S Valve Stem - 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with. 3 intake valves, 3 exhaust valves, 8 valve springs, 8 valve keepers. For Models: 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: VTK158-3) $103.14 Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, .015 O/S Valve Stem - 158 CID, 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with. 3 intake valves, 3 exhaust valves, 8 valve springs, 8 valve keepers. For Models: 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: VTK158-15) $106.92 Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, Std. Valve Stem - 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with. 3 intake valves, 3 exhaust valves, 8 valve springs, 8 valve keepers. For Models: 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: VTK158) $62.58 Valve Service Kit - Made by TISCO. For Servicing one engine when only valve refacing is required. For Fordson Dexta. Contains: springs, guides, locks, (no valves). (Part No: VSKP152) $42.64 Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. Kit contains: Springs, Key and Guides. (Gasket set VGCPNM must be ordered separately) For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964) (Part No: VSKF134G) $45.55 [Enlarge Picture] Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. For 501, 601, 701, 801, 901, 2000, 4000 (1958 TO 1964). Contains: springs, guides, locks, (no valves). (Part No: VSKF172D) $44.10 [Enlarge Picture] Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. For Fordson Major. Contains: springs and guides only (No Keys, No valves). (Part No: VSKF220) $75.35 [Enlarge Picture] Valve Train Kit, 134 CID Gas - Made by TISCO. For Servicing one engine when valve replacement is necessary. Kit contains: Valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964) (Part No: VOKF134G) $98.57 [Enlarge Picture] Valve Train Kit, 172 CID Diesel - For 172 CID diesel. Kit includes 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve keys, 8 valve locks, 8 valve springs. For Models: 4000, 801, 901 all 1964 and before. (Part No: VTK172) $141.86 Valve Train Kit, 172 CID Gas - For 172 CID 4 cylinder gas engines. Kit comes with. 4 Intake valves, 4 Exhaust valves, 8 Valve guides, 8 Valve springs, 8 Valve keys, 8 Valve locks. Models: 2000 <1964, 4000 1962-1964, (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840 all 1955-1957), (801, 811, 821, 841, 851, 861, 871, 881 all 1958-1962), (900, 950, 960 all 1955-1957), (901, 941, 951, 961, 971, 981 all 1958-1962). (Part No: VTK143) $91.01   Engine Parts Bushing, Connecting Rod - For Models: 1000, 1500, 1600, 1700, 1910, 2110, 2120, CL45, CL55. (Part No: SBA198516021) $9.9 [Enlarge Picture] Camshaft - For press on gear. Fits 8N S N 263843 and greater using SIDE mount distributor. (Part No: 8N6250) $126.87 [Enlarge Picture] Camshaft - For 4-cyl gas or diesel engine in tractors 5000 (1965 to 1975); 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981); 5610, 5900, 6610, 6710, 7710, (1981 to 1991);industrials 650, 6500, 750, 755, 755A, 7500, (1972 to 7-1987);755B, (8-1987 to -);655, 655A, (6-1985 to 10-1988). With 3 16" Keyway. Replaces C7NN6250B, E1TN6250AA, E6NN6250AA. (Part No: 87800353) $155.52 [Enlarge Picture] Camshaft - For Models: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610, 4100, 3055, 3100, 335, 340, 3400, 3500, 3550, 3900, 3910, 4110, 4140, 420, 4200, 4400, 4410, 4500, 515, 532, 535, 545, 550, 555, ALL 3 CYLINDER DIESELS. 3610, 3910, BOTH GAS ENGINES. Camshaft also replaces C7NN6250E. (Part No: E8NN6250AA) $125.95 [Enlarge Picture] Camshaft - Re-ground - Camshaft, Re-ground, Ford 2N, 9N, 8N with front mount distributor. NO CORE charge. For bolt on style timing gear. (Part No: 2N6250B) $151.47 [Enlarge Picture] Camshaft Kit, Refaced Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that Use a pressed on cam gear.: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000. Order S.61044 press on cam gear if needed. CALL FOR AVAILABILITY. You may receive a New camshaft if remanufactured is not available. (Part No: 734145) $240.00 [Enlarge Picture] Camshaft Kit, Side Mount Distributor Engine - Includes: NEW Camshaft with Distributor Gear & Lifters For 8N with Side Mount Distributor (Part No: R0885K) $229.25 [Enlarge Picture] Camshaft, New - New Camshaft. This is the Lock Ring Type and will work for both Bolt-on and Lock Ring type applications. Bolt on cam gear type is only available in a Reground Camshaft (See P N R1188903) - Call for availability and price. For NAA, Jubilee, 500 thru 900, 2000, & 4000. 134 & 172 CID Gas Engines (1953-1964). (Part No: C0NN6251A) $134.22 [Enlarge Picture] Camshaft, Reground - For Models: 800, 900, 4000 all with diesel 172 engine. Please call for availability. Refundable $30 core charge will be added to your order during processing and will not show up on the order confirmation page. (Part No: R1189000) $176.89 Camshaft, Reground - Bolt on gear type. For Models: NAA, 600, 700, 800, 900, 2000, 4000 all w 4 cyl. gas engines and casting # C0NN6251. (Part No: R1188903) $151.47 Combustion Chamber - For Model: 2110. (Part No: SBA111326101) $31.50 Connecting Rod - For Models: Dexta, Super Dexta. Replaces 981803971. (Part No: 957E6207) $67.68 [Enlarge Picture] Connecting Rod Bolt - Must Be ordered in multiples of 4 price is for each. For gas or diesel Models: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. (Part No: E4TN6214AA) $3.46 [Enlarge Picture] Connecting Rod Bolt & Nut Assembly - For Models: Dexta, Super Dexta. (Part No: 957E6215) $3.94 [Enlarge Picture] Connecting Rod Bushing - 1.375" pin. For Models: Major, Power Major, Super Major. (Part No: E1ADDN6207) $5.40 [Enlarge Picture] Connecting Rod Nut - Must be ordered in multiples of 10 price is for each. For gas or diesel Models: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 66710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Part No: 385279S2) $1.35 [Enlarge Picture] Connecting Rod w/Bushing, reconditioned - Must match casting number 312716 (fits 1-1 4in. piston pin) Fits all tractors with DIESEL 4-cylinder engines. NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Recoditioned Piston Rod with Bushing. (Part No: 1201615) $79.17 [Enlarge Picture] Connecting Rod, Reconditioned - For Models: 600, 700, 800, 900, 2000, 4000 all with 4 cyl. diesel engines and casting # EAA6210 on rod (for 1-1 8in. piston pin). (Part No: R1201607) $104.73 [Enlarge Picture] Connecting Rod, Reconditioned - For Models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, TW5, TW10. All with gas or diesel engine and casting # CN6202 or C7NN6202. (Part No: R1202365) $104.94 Connecting Rod, Reconditioned, w/ Bushing - Must match casting number EAA6205. Fits all gas Tractors with GASOLINE 134 or 172CID Engines. NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 all. Reconditioned Piston Rod with Bushing. No core charge. (Part No: 1201599) $103.54 [Enlarge Picture] Crankshaft - NEW KIT WITH BEARINGS. For Models: 9N, 2N, 8N With STD Rod And Main Bearings. (Part No: 9N6303ACK) $569.95 [Enlarge Picture] Crankshaft - Reground With Bearings. Fits Ford 8N, 2N, 9N. Reground Crankshaft. A refundable $50.00 core charge will added to your order. (Part No: 1198019) $424.00 [Enlarge Picture] Crankshaft - NEW crankshaft for models 9N, 8N, 2N. Does not include bearings. (Part No: 9N6303A) $432.30 [Enlarge Picture] Crankshaft Assembly - Crankshaft assembly. Complete with standard rod set CRK-FDX, standard main set MBK-FDX, and thrust washers 957E6634 & 957E6336C. For Models: Dexta, Super Dexta. (Part No: E2006T9-WB) $408.29 [Enlarge Picture] Crankshaft Pulley - Crankshaft pulley for Ford 9N, 2N, 8N tractors. Crankshaft mounting is 1.63 OD and 1.18 in. ID. and has four 1 4"-20 threaded holes for hub when being used with front mounted loader. Can be used with or without loader. Replaces 2N6312. Used with part #'s 192161 and 194354. (Part No: 192160) $49.05 [Enlarge Picture] Crankshaft Pulley - For Ford 9N, 2N, 8N tractors. Supplied with four rubber bushings for hub with 13\32 pins when being used with front mounted loader. (Part No: 192152) $69.23 [Enlarge Picture] Crankshaft Repair Kit - Speedi Sleeve Crankshaft repair kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: 99472) $87.91 [Enlarge Picture] Crankshaft, 3-Cylinder, 4.2 in. Stroke - For 3- cylinder 4.2 inch stroke engines. (Note: we also have crankshafts for 4.4 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 175 cu. in. eng 4.203 stroke 3 cyl. 183 CID and 192 CID eng. For models (3000 Gas Diesel), (4000 Gas 1965 to 3 1968), 2610 Diesel, 2910 Diesel, (3610, 3910 Gas Diesel), (3230, 3430, 3930 up to 9 1990. Industrials: 230A Diesel, (250C, 260C Up to 9 1990), (234, 334, 335, 340A, 340B Gas Diesel), 345C, (3400, 3500 Gas Diesel), 445C, (4400, 4500 Gas 1965 to 3 1968. Rplaces C5NE6303R. Additional $50 shipping will be added to your order due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: F0NN6303NA) $366.96 [Enlarge Picture] Crankshaft, 3-Cylinder, 4.4 in. Stroke - For 3- cylinder 4.4 inch stroke engines. (Note: we also have crankshafts for 4.2 inch stroke engines, VERIFY stroke AND part number before ordering. Fits: 3930, (4000 gas 4 1968 & Newer), 4000 Diesel, 4100, 4600, 4110, 4130, 4610, 4630. Industrials: 250C, 260C, 345D, 420, 445, 445C, 445D, (4400, 4500 Gas 4 1968 & newer), (4400 & 4500 Diesel), 515, 530A, 531, 535, (540 & 545 Diesel). (Part No: F0NN6300MA) $324.92 [Enlarge Picture] Crankshaft, 4 cyl, Diesel - For 601, 701, 801, 901, 2000, 4000 (Except Majors) 58 64, all with Diesel 4 cylinder engines. Crankshaft, New, Not Reground. (Part No: E2JL6300BA) $499.00 [Enlarge Picture] Crankshaft, 4.4 In. Stroke, 4-Cyl - Fits 4 cylinder 268 CID engines with 4.4 In. Stroke. Uses 36mm rod bearings (Bearings NOT included). For Models: 6610, 6710, 7710. (Part No: D9NN6303AA) $495.47 [Enlarge Picture] Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID & 172 CID engines on: NAA, Jubilee, 600, 620, 630, 640, 641, 650, 660, 601, 611, 621, 631, 641, 651, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: D1NL6303D) $602.00 [Enlarge Picture] Crankshaft, Less Bearings - New Crankshaft Fits: Major, Super Major. (Part No: E1ADDN6303F) $297.20 [Enlarge Picture] Crankshaft, New - 4 cylinder, 4.2" stroke, 12.5mm 78 tooth balancer gear. Uses 36mm wide Rod bearings. NOTE: Measure balancer drive gear before ordering. Do not mix sizes (new OEM cranks are 15mm). For Models: 5000, 5500, 5610, 6000, 6600, 6700, 7000. (Part No: C5NE6303K) $506.09 [Enlarge Picture] Cylinder Head - For 2N, 8N, 9N all GAS 1939-52. Cylinder Head. (Part No: 8N6050A) $187.11 [Enlarge Picture] Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For Models: 5600, 5700, 6600, 6610, 6700, 6710. (Part No: VOKF256A) $141.85 Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For Models: 7000, 7600, 7610, 7700, 7710. (Part No: VOKF256T) $164.56 Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For 5600, 5700, 6600, (Part No: VOKF256) $93.18 Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For Models: 8000, 8200, 8600. (Part No: VOKF401A) $111.05 Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For Models: 8700, TW10. (Part No: VOKF401B) $195.00 Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul. For 9000, 9200, 9600, 9700, TW20, TW30, (Part No: VOKF401T) $184.65 Cylinder Head Studs - Studs are priced each, must order in quantities of 9. Tractor uses 18. Minimum order is 9. Studs are 7 16 diameter and 3 inchs long. For 9N, 2N, 8N. Must order in quantities of 9, priced each. (Part No: 8N6065A) $4.25 [Enlarge Picture] Cylinder Head with Valves - For three cyl. 144 & 152 cu.in. Perkins engines used in Dexta and Super Dexta. Contains 3 intake and 3 exhaust valves, 6 inner & 6 outer valve springs, 6 valve spring retainers, 6 pairs of valve keys and 6 guides. (Part No: E2046T9) $397.16 [Enlarge Picture] Cylinder Head, NEW - For 134 and 172 CID engine, Cylinder head has 1 2" dia. head bolt holes. Bushings are included for use with 7 16" dia. head bolts. When block has 1 2" dia. head bolt threads, do not use the bushings. For Models: 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Does not include valves, springs or guides. (Part No: D3JL6049B) $839.58 [Enlarge Picture] Cylinder Head, Rebuilt - Rebuilt Cylinder Head comes complete with seats and guides. For Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000 all Gas with 172 Engine and 7 16" studs and casting # begining with EAF or has the # 310100 cast on it. CALL FOR AVAILABILITY !! (Part No: R1194570) $484.65 [Enlarge Picture] Cylinder Packing Kit - Seal, Packing. For Models: 724, 725, 730. (Part No: 251165) $35.70 Cylinder Packing Kit - Seal, Packing. For Model: 750. (Part No: 309939) $58.37 Cylinder Packing Kit - Seal, Packing For 750, (Part No: 309940) $42.73 Cylinder Packing Kit - Seal, Packing. For Models: 702, 725, 730. (Part No: 309957) $32.38 Cylinder Packing Kit - Seal, Packing. For Model: 740. (Part No: 309959) $42.29 Distributors and Distributor Parts - These are located in the Electrical System parts section. (Part No: DISTRIBUTORS) $0.00 Exhaust Valve - For Models: 4000, 801, 901. (Part No: 310651) $17.96 [Enlarge Picture] Exhaust Valve - Exhaust valve. For FORDSON MAJOR, SUPER MAJOR with 220 CID 4 Cylinder Diesel. (Part No: 723F6505ABA) $17.52 [Enlarge Picture] Exhaust Valve - Exhaust valve. For Model: DEXTA. (Part No: 957E6505) $7.18 Exhaust Valve STD - Standard exhaust valve. For Models: 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: D8NN6505AA) $28.56 Exhaust Valve Standard - H Standard exhaust valve. For Models: 2600, 3600, 4600, 5600, 5700, 6600. (Part No: D3NN6505A) $10.50 Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, .003 - Exhaust valve, .003" o s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505F) $19.84 [Enlarge Picture] Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, .015 - Exhaust valve, .015" o s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505G) $23.80 [Enlarge Picture] Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, STD. - Standard exhaust valve. For Models: 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505E) $10.50 [Enlarge Picture] Exhaust Valve.003 - Exhaust valve, .003" o s stem. For Models: 2600, 3600, 4600, 5600, 5700, 6600. (Part No: D3NN6505B) $22.18 Gear, Camshaft Hydraulic Pump Drive - For Models: 2000, 4000, 600, 700, 800, 900, NAA, Jubilee, all with 134 gas or 172 diesel engines. Camshaft Hydraulic Pump Drive Gear. 5 16 inch tapped hole. Also replaces 500010. This is NOT a Camshaft Timing Gear (See P N S.61044). (Part No: EAF907B) $46.24 [Enlarge Picture] Govenor Mount w/ Gasket - Aluminum cover used with side mount destributor. (Part No: 8N6017B) $69.66 Governor - Complete governor assembly with gasket, 3 arm, for 9N and 2N (1939-47), without proofmeter drive. (Part No: 9N18200C) $303.08 [Enlarge Picture] Governor - Complete governor assembly, 2 arm, for 8N (1948 through 1952 with proofmeter drive). (Part No: 8N18204B) $199.90 [Enlarge Picture] Governor Centrifugal Assembly - Governor internal centrifugal assembly, fits 9N18200C or 8N18204B above, for 9N, 2N, 8N (1939 thru 1952). (Part No: 9N8N18179CA) $184.90 [Enlarge Picture] Governor Compensating Spring - 4.95" length. For Model: 8N. (Part No: 8N9827) $5.08 [Enlarge Picture] Governor Compensating Spring - 3.7" length. For Models: 9N, 2N. (Part No: 9N9827) $6.76 [Enlarge Picture] Governor Dust Seal - Replacement Governor dust seal. For Models: 2N, 8N, 9N. (Part No: 9N18183) $4.58 [Enlarge Picture] Governor Housing - Governor Housing includes needle bearing, Lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 9N, 2N, 8N tractors built 1939 thru 1952. (Part No: 8N18085) $107.35 [Enlarge Picture] Governor Lever Spring - For Models: 9N, 2N. (Part No: 9N18196) $2.70 [Enlarge Picture] Governor Lower Race Assembly Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18186B) $42.48 [Enlarge Picture] Governor Needle Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18182) $8.69 [Enlarge Picture] Governor Repair Kit - Basic - For 9N, 2N, 8N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5 8 inch). (Part No: BOK12502) $48.37 [Enlarge Picture] Governor Repair Kit, Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or w o proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5 8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A) $119.00 [Enlarge Picture] Governor Shaft - Shaft assembly, with or w o proofmeter. For 2N, 8N, 9N. (Part No: 9N8N18187A) $40.44 [Enlarge Picture] Governor Shaft Oil Seal - Governor shaft oil seal, for 134 & 172 CID gas engines. Tractors: NAA, Golden Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (1953 to 1964). (Part No: EAF18183B) $7.90 [Enlarge Picture] Hand Starting Crank - 9N, 2N, 8N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Part No: 351010R31) $29.50 Intake Valve - For Models: 4000, 801, 901. (Part No: 310650) $15.00 [Enlarge Picture] Intake Valve - Intake valve. For FORDSON MAJOR, SUPER MAJOR with 220 CID 4 Cylinder Diesel. (Part No: DDN6507) $11.48 [Enlarge Picture] Intake Valve - Intake valve. For Model: DEXTA. (Part No: 957E6507) $7.18 Intake Valve STD - Standard intake valve. For Models: 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Part No: D8NN6507AB) $24.22 Intake Valve, .003 - Intake valve, .003 o\s stem. For 2600, 3600, 4600, 5600, 5700, 6600, 6610, 6700, 6710, 8700, TW10 (Part No: D3NN6507B) $14.52 Intake Valve, 201 CID Gas or Diesel & 192 Gas, .003 - Intake valve, .003 o\s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C5NN6507C) $17.18 [Enlarge Picture] Intake Valve, 201 CID Gas or Diesel & 192 Gas, .015 - .015" O S stem. For Models: 2000, 3000, 4000, 4600, 4610, 5000, 8000, 8200, 8600. (Part No: C5NN6507D) $20.40 [Enlarge Picture] Intake Valve, 201 CID Gas or Diesel & 192 Gas, STD - H Standard intake valve. For Models: 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C5NN6507B) $10.58 [Enlarge Picture] Intake Valve, Standard - H Standard intake valve. For 2600, 3600, 4600, 5600, 5700, 6600, 6610, 6700, 6710, 8700, TW10. (Part No: D3NN6507A) $10.58 O-Ring Kit - O-ring kit for lift cover & pump. For Models: 2000, 3000, 4000, 5000, 7000. (Part No: B5001) $10.56 [Enlarge Picture] O-Ring Kit - O-ring kit, valve mounting. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: DHPN485A) $8.96 [Enlarge Picture] Pin Bushing, Piston, 152 Diesel - For 1 Piston Rod. 3 Required per engine. For Models: Dexta, Super Dexta. (Part No: 957E6207A) $5.46 Piston Rings - These are located in the ENGINE RINGS category. (Part No: ENGINE RINGS) $0.00 Pistons and Sleeves - Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Part No: Various) $100.00 Power Cylinder End - Cylinder end, for power steering cylinder, left end. For Models: 5700, 6700, 6710, 7700, 7710. (Part No: D8NN3B539AB) $45.22 [Enlarge Picture] Push Rod - For Models: 2000, 3000, 4000, 5000, 7000, all for 3 or 4 cylinder Diesel from 8 1965 to 1975. Push Rod is 12.17 inches long. (Part No: C5NE6567B) $8.08 [Enlarge Picture] Push Rod - For 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7700, 231, 233, 333, 420, 515, 532, 535, all with 3 or 4 cylinder Diesel from 1975 to 1981. Push Rod 12.17 inches long. (Part No: C5NE6567B) $8.08 [Enlarge Picture] Push Rod - For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 7610, 7710, 334, 335, 530A, all with 3 or 4 cylinder Diesel from 1981 to 10 1991. Push Rod is 12.17 inches long. (Part No: C5NE6567B) $8.08 [Enlarge Picture] Push Rod - For 3230, 3430, 3930, 4130, 4630, 4830, 5030, all with 3 or 4 cylinder Diesel from 1990 and up. Push Rod is 12.17 inches long. (Part No: C5NE6567B) $8.08 [Enlarge Picture] Push Rod - For 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35, all with 3 or 4 cylinder Diesel engines FROM 1982 TO 10 1991. Push Rod is 12.17 inches long. (Part No: C5NE6567B) $8.08 [Enlarge Picture] R Seal Retainer - Retainer, for rear crankshaft oil seal. For Models: 2N, 8N, 9N. (Part No: 91A6335) $25.74 [Enlarge Picture] Ring Gear, Flywheel, 128 Tooth count - For Diesel 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6 1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3 1990 and up. Replaces C5NE6384AA. Starter Flywheel Ring Gear. (Part No: E2NN6384AA) $30.30 [Enlarge Picture] Rocker Arm - Rocker arm for exhaust valve. For Models: 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5 1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Part No: C5NE6529A) $19.99 [Enlarge Picture] Rocker Arm - Rocker arm, for intake valve. Replaces D9NN6529AA. For Models: 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5 1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Part No: D9NN6529AB) $27.95 [Enlarge Picture] Rod w/Bushing, Reconditioned - Fits 9N, 2N, 8N all with Gas. Reconditioned Piston Rod with Bushing. (Part No: 1201581) $139.55 [Enlarge Picture] Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 9N, 2N, 8N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Part No: 8N6546B) $189.90 [Enlarge Picture] Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384) $28.82 [Enlarge Picture] Tappet, Diesel Engines - Tappet, 2.06" long, .990" dia., DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Sold in quantities of 2, priced individually. (Part No: C5NE6500C2) $14.50 [Enlarge Picture] Tappet, Diesel Engines - Tappet, 2.06" long, .990" dia., DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Sold in quantities of 2, priced individually. (Part No: C5NE6500C2) $14.50 [Enlarge Picture] Timing Gear Cover - For 8N with Side Mount Distributor. (Part No: 8N6019B) $66.72 [Enlarge Picture] Timing Gear Set - Standard Press on Cam timing gear set also includes (EAF6306B) crankshaft gear fits, 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256MSTD) $80.17 [Enlarge Picture] Timing Gear, Camshaft - For Bolt-on type camshafts. Fits 9N, 2N, 8N thru 1952. (Part No: 7RA6256) $65.52 [Enlarge Picture] Timing Gear, Camshaft - 26 teeth, internal keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401, & 401T Engines. For Models: 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. (Part No: C5NE6306A) $66.93 Timing Gear, Camshaft - 26 teeth, internal keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401, & 401T Engines. For Models: 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5500, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7500, 7600, 7610, 7700, 7710, 7810, 7840, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Part No: C5NE6306A) $66.93 Timing Gear, Camshaft - 26 teeth, internal keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401, & 401T Engines. For Models: 230A, 345C, 445C, 4610SU, 530A, 555A, 555B, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: C5NE6306A) $66.93 Timing Gear, Crankshaft - For Models: 2N, 8N, 9N. Timing Gear Crankshaft. (Part No: 486306A) $38.58 [Enlarge Picture] Timing Gear, STD - Standard steel camshaft gear. For Models: 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256M) $54.76 [Enlarge Picture] Turbocharger - For Models 2550 SN<-606630 Non Emissionized engine, (575E, 675E All SN<-31009909 Non Emissionized engine), 6810 SN<-359818 Non Emissionized engine, 7010 SN 850001M-850179M Non Emissionized engine, 70140S SN<-255857M Non Emissionized engine, (7740, 77400, TB100, TB85 Non Emissionized engine). Replaces F0NN6K682BA, 83991489, 465153-003, 465156-5003S. (Part No: 83999247) $634.61 Valve Guide - For FORDSON MAJOR, SUPER MAJOR. Must order in multiples of 8. Price is for 1. (Part No: DDN6510A) $7.04 [Enlarge Picture] Valve Guide - Single valve guide for 9N, 2N, 8N. (Part No: 8BA6510B) $5.84 [Enlarge Picture] Valve Guide Retainer - 120 CID 4 cylinder gas engines. Sold in Multiples of 8 only, price shown is for one (Enter '8' or '16' etc. in QTY). For 2N, 8N, 9N. (Part No: 40-6512) $.81 [Enlarge Picture] Valve Key, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free rotating exhaust valves. For 2N, 8N, 9N. Sold in quantities of 8 only, price shown is for one. (Part No: 7HA6518) $0.65 [Enlarge Picture] Valve Key, Rotating Exhaust - 120 CID 4 cylinder gas engine. Valve key for FREE ROTATING exhaust valves. Sold in quantities of 8 only price shown is for one. For Models: 2N, 8N, 9N. (Part No: EAM6518A) $.86 [Enlarge Picture] Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve Kit) $0.00 Valve Rotor Assembly - Valve rotator kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves (Part No: 8N6534B) $10.35 [Enlarge Picture] Valve Seat, Exhaust - For Models: 9N, 2N, 8N. (Part No: 218-7405) $8.25 [Enlarge Picture] Valve Seat, Intake - For Models: 2N, 8N, 9N. (Part No: 218-7535) $3.52 [Enlarge Picture] Valve Service Kit - For Models: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Contains: springs, guides, locks, (no valves). (Part No: VSKF233) $26.02 Valve Service Kit - For Models: 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, 9700, TW10, TW20, TW30. Contains: springs, locks, (no valves). (Part No: VSKF401) $32.58 Valve Service Kit - Contains: 8 Valve Springs, 8 Valve Guides-Solid Type & 16 Valve Locks For 2N, 8N, 9N. (Part No: VSKF928N) $43.33 [Enlarge Picture] Valve Service Kit - For Models: 2000, 2600, 3000, 3600, 4000, 4600. Contains: springs, guides, locks, (no valves). (Part No: VSKF158) $19.54 Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. For 9N, 2N, 8N with solid guides, free rotating exhaust valves. Kit contains valve springs, keys and guides. (Part No: VSKF928NFR) $79.24 [Enlarge Picture] Valve Spring - 120 CID 4 cylinder gas engine. Valve spring for use w split guide. For 2N, 8N, 9N. Sold in quantities of 8 only. price shown is for one. (Part No: 2NC6513) $1.63 [Enlarge Picture] Valve Spring Retainer, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 2N, 8N, 9N.``** Must order qty 8, priced each.** (Part No: 8BA6514) $1.56 [Enlarge Picture] Valve Spring Set - Sold in quantities of 8 priced individually. Fits 9N, 2N, 8N. (Part No: 8N6513) $2.56 [Enlarge Picture] Valve Stem Seal - Seal for valve guide in 120 CID 4 cylinder gas engine. For 2N, 8N, 9N. **Sold in sets of 8, priced each.** (Part No: 8BA6571) $0.99 [Enlarge Picture] Valve Tappet - ADJUSTABLE tappet. Priced EACH. Fits: 9N, 2N, 8N. Note: Qty 8 used in engine. (Part No: A0NN6500A) $14.85 [Enlarge Picture] Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. (Part No: 8WR1770) $9.96 [Enlarge Picture] Valve, Exhaust - Exhaust valve using solid guide. Uses 7HA6518 lock. For Models: 2N, 8N, 9N. (Part No: 8N6505A) $8.02 [Enlarge Picture] Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Sold in quantities of 4, price is for 1. (Part No: EAF6505D) $9.95 [Enlarge Picture] Valve, Exhaust, Free-rotating - Exhaust valve for free-rotating type. Uses solid guide & EAM6518A lock. For Models: 2N, 8N, 9N. (Part No: 8N6505C) $9.76 [Enlarge Picture] Valve, Intake - Intake valve using solid guide. Uses 7HA6518 lock. For 2N, 8N, 9N (Part No: 8BA6507A) $7.19 [Enlarge Picture] Valve, Intake - Intake valve, mushroom type using split guide. For Models: 2N, 8N, 9N. (Part No: 40-6505A) $31.05 [Enlarge Picture] Valve, Intake, 172 CID Gas - Intake valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Must order in quantities of 4, price is for 1. (Part No: EBU6507A) $6.86 [Enlarge Picture]   Engine Pistons and Sleeves Cylinder Sleeve, .005 oversize .040 - Oversize replacement for .040 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.273 inches - .005 larger than original. Sleeve is .0425 thickness to retain original piston bore of 3 3 16 inches. For Models: 2N, 8N, 9N. (Part No: S1135A2) $26.89 [Enlarge Picture] Cylinder Sleeve, .005 oversize .090 - Oversize replacement for .090 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.373, .005 larger than original. Sleeve is .0925 thickness to retain original piston bore of 3 3 16 inches. For 2N, 8N, 9N. (Part No: S1137-2) $30.27 [Enlarge Picture] Cylinder Sleeve, .040 - For models: 9N, 2N, 8N. This Sleeve is.040" thin-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: C0NN6055B) $26.91 [Enlarge Picture] Cylinder Sleeve, .050 - Wall sleeve for use with.0825 oversize pistons. For Models: 2N, 8N, 9N. (Part No: S1138) $27.00 [Enlarge Picture] Cylinder Sleeve, .090 - For models 9N, 2N, 8N. This Sleeve is.090 Heavy-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: 8N6055B) $28.98 [Enlarge Picture] Pin Bushing, Piston - Fits 158 CID gas & diesel, 175 CID gas & diesel, 192 CID gas, 201 CID diesel, 233 CID diesel, 256 CID gas & diesel and 268 CID diesel. For Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710. (Part No: C5NE6207A) $6.12 [Enlarge Picture] Piston - .040" oversize, standard bore 4.2". For Models: 2000, 2600, 3000, 3600 with either 158 or 175 CID 3 cylinder gas engines. (Part No: D2NN6108D) $165.34 [Enlarge Picture] Piston & Ring Kit - .020" oversize piston & ring kit For Models: 3000, 3600 with 175 CID 3 cylinder diesel engine, 4.2" standard bore. Complete for one engine. (Part No: PRK175-020) $294.62 Piston & Ring Kit - .030" oversize piston & ring kit For Models: 3000, 3600 with 175 CID 3 cylinder diesel engine, 4.2" standard bore. Complete for one engine. (Part No: PRK175-030) $294.62 Piston & Ring Kit - .040" oversize piston & ring kit For Models: 3000, 3600 with 175 CID 3 cylinder diesel engine, 4.2" standard bore. Complete for one engine. (Part No: PRK175-040) $294.62 Piston & Ring Kit - Standard 4.2" bore pistons & rings. For Models: 3000, 3600 with 175 CID 3 cylinder diesel engine. Complete for one engine. (Part No: PRK175) $294.62 Piston & Ring Kit - .020" oversize piston & ring kit For 5000, 5600, 5700, (Part No: PRK233-020) $392.83 [Enlarge Picture] Piston & Ring Kit - .030" oversize piston & ring kit For 5000, 5600, 5700, (Part No: PRK233-030) $392.83 [Enlarge Picture] Piston & Ring Kit - .040" oversize piston & ring kit For 5000, 5600, 5700, (Part No: PRK233-040) $392.83 [Enlarge Picture] Piston & Ring Kit - .020" oversize piston & ring kit. For 5000, 5600, 5700, 6600, 6700, (Part No: PRK256-020) $392.83 [Enlarge Picture] Piston & Ring Kit - .030" oversize piston & ring kit. For 5000, 5600, 5700, 6600, 6700, (Part No: PRK256-030) $392.83 [Enlarge Picture] Piston & Ring Kit - .020" oversize piston & ring kit For 7000, 7600, 7700, (Part No: PRKF258-020) $391.25 Piston & Ring Kit - .030" oversize piston & ring kit For 7000, 7600, 7700, (Part No: PRKF258-030) $391.25 Piston & Ring Kit - .040" oversize piston & ring kit For 7000, 7600, 7700, (Part No: PRKF258-040) $391.25 Piston & Ring Kit - Standard bore piston & ring kit For 7000, 7600, 7700, (Part No: PRKF258) $391.25 Piston & Ring Kit - .020" oversize piston & ring kit For 7600, 7610, 7700, 7710, (Part No: PRKF268-020) $391.25 Piston & Ring Kit - .030" oversize piston & ring kit For 7600, 7610, 7700, 7710, (Part No: PRKF268-030) $391.25 Piston & Ring Kit - .040" oversize piston & ring kit For 7600, 7610, 7700, 7710, (Part No: PRKF268-040) $391.25 Piston & Ring Kit - Standard bore piston & ring kit For 7600, 7610, 7700, 7710, (Part No: PRKF268) $391.25 Piston & Ring Kit - .020" oversize piston & ring kit For 7610, 7710, (Part No: PRKF269-020) $467.81 Piston & Ring Kit - .030" oversize piston & ring kit For 7610, 7710, (Part No: PRKF269-030) $467.81 Piston & Ring Kit - .040" oversize piston & ring kit For 7610, 7710, (Part No: PRKF269-040) $467.81 Piston & Ring Kit - Standard bore piston & ring kit For 7610, 7710, (Part No: PRKF269) $467.81 Piston & Ring Kit - .020" oversize piston & ring kit. For 8000, (Part No: PRKF401-020) $589.25 Piston & Ring Kit - .030" oversize piston & ring kit. For 8000, (Part No: PRKF401-030) $589.25 Piston & Ring Kit - .040" oversize piston & ring kit. For 8000, (Part No: PRKF401-040) $589.25 Piston & Ring Kit - Standard bore piston & ring kit. For 8000, (Part No: PRKF401) $589.25 Piston & Ring Kit - .020" oversize piston & ring kit. For 8000, 8200, 8600, 8700, TW10, (Part No: PRKF402-020) $586.87 Piston & Ring Kit - .030" oversize piston & ring kit. For 8000, 8200, 8600, 8700, TW10, (Part No: PRKF402-030) $586.87 Piston & Ring Kit - .040" oversize piston & ring kit. For 8000, 8200, 8600, 8700, TW10, (Part No: PRKF402-040) $586.87 Piston & Ring Kit - Standard bore piston & ring kit. For 8000, 8200, 8600, 8700, TW10, (Part No: PRKF402) $586.87 Piston & Ring Kit - .020" oversize piston & ring kit. For 9000, 9200, 9600, (Part No: PRKF404-020) $784.08 Piston & Ring Kit - .030" oversize piston & ring kit. For 9000, 9200, 9600, (Part No: PRKF404-030) $784.08 Piston & Ring Kit - .040" oversize piston & ring kit. For 9000, 9200, 9600, (Part No: PRKF404-040) $784.08 Piston & Ring Kit - Standard bore piston & ring kit. For 9000, 9200, 9600, (Part No: PRKF404) $784.08 Piston & Ring Kit - .020" oversize piston & ring kit. For 9700, TW20, TW30, (Part No: PRKF405-020) $586.87 Piston & Ring Kit - .030" oversize piston & ring kit. For 9700, TW20, TW30, (Part No: PRKF405-030) $586.87 Piston & Ring Kit - .040" oversize piston & ring kit. For 9700, TW20, TW30, (Part No: PRKF405-040) $586.87 Piston & Ring Kit - Standard bore piston & ring kit. For 9700, TW20, TW30, (Part No: PRKF405) $586.87 Piston & Ring Kit - .020" oversize piston & ring kit. For 6600, 6610, 6700, 6710, (Part No: PRKF4268-020) $392.83 Piston & Ring Kit - .030" oversize piston & ring kit. For 6600, 6610, 6700, 6710, (Part No: PRKF4268-030) $392.83 Piston & Ring Kit - .040" oversize piston & ring kit. For 6600, 6610, 6700, 6710, (Part No: PRKF4268-040) $392.83 Piston & Ring Kit - Standard bore piston & ring kit. For 6600, 6610, 6700, 6710, (Part No: PRKF4268) $392.83 Piston & Ring Kit - 158 DIesel - STD - Standard size piston & ring kit For 158 Diesel (4.2" Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158) $360.52 Piston & Ring Kit - 158 DIesel -.020 - .020" oversize piston & ring kit For 158 Diesel (4.2" Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-020) $360.52 Piston & Ring Kit - 158 DIesel -.030 - .030" oversize piston & ring kit For 158 Diesel (4.2" Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-030) $360.52 Piston & Ring Kit - 158 DIesel -.040 - 040" oversize piston & ring kit For 158 Diesel (4.2" Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-040) $360.52 Piston And Ring Kit, STD, 192 CID Gas - For models 4000 (1965 to 3-1968). Piston kit is for a 192 CID gas 3-Cylinder with 4.4 inch standard bore. Kit contains: (3) pistons, piston pins, retainers, and complete ring set. (Part No: PRKF1920G) $360.80 [Enlarge Picture] Piston And Ring Kit, STD, 201 CID Diesel - For 4000 with 201 CID (4.4in bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3)pistons, pins, retainers and rings. (Part No: PRK201) $310.80 [Enlarge Picture] Piston And Ring Kit, STD, 201 CID Gas - For Models: 4000, 4600 (With 201 CID Gas 3-Cylinder, 4.4 inch Bore). Kit contains: (3) Pistons, Pins, Retainers, and complete ring set. (Part No: PRKF2010G) $363.03 [Enlarge Picture] Piston And Ring Kit,.020, 201 CID Diesel - For 4000 with 201 CID (4.4in bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3).020 overbore pistons, pins, retainers and rings. (Part No: PRK201-020) $310.80 [Enlarge Picture] Piston And Ring Kit,.030, 201 CID Diesel - For 4000 with 201 CID (4.4in bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3).030 overbore pistons, pins, retainers and rings. (Part No: PRK201-030) $310.80 [Enlarge Picture] Piston And Ring Kit,.040, 201 CID Diesel - For 4000 with 201 CID (4.4in bore) Diesel, 3 Cylinder, 1965-1975. Kit contains (3).040 overbore pistons, pins, retainers and rings. (Part No: PRK201-040) $310.80 [Enlarge Picture] Piston Kit , Overbore, 172 CID Gas - 4" overbore for increased power, autothermic pistons, chrome top rings, chrome steel segment oil rings. For 4000, 800, 801, 900, 901 1963-64. (Part No: PK109) $324.72 Piston Kit, 220 CID Diesel - For 220 CID Diesel engine (s n 1425098 to 1591022) using 1.375in piston wrist pins. Contains (4) Pistons, sleeves, & rings. Sleeve dimensions: Barrel O.D. 4.321", Flange O.D. 4.622". For FORDSON MAJOR, SUPER MAJOR. (Part No: PK16A) $449.50 [Enlarge Picture] Piston Kit, 220 CID Diesel - For 220 CID Diesel engine (to s\n 1425097) using 1.25in piston wrist pins. Contains (4) Pistons, sleeves, & rings. Sleeve dimensions: Barrel O.D. 4.321 , Flange O.D. 4.622. (Part No: PK16) $451.30 Piston Kit, STD, 220 CID Diesel - For 220 CID Diesel engine after s n 1591022 (Mid 1961 & up). Contains (4) Pistons, sleeves, pins, retainers & rings. Sleeve flange O.D. 4.706". (1.375 wrist pins). For FORDSON MAJOR, SUPER MAJOR, (Part No: PK16B) $507.91 [Enlarge Picture] Piston Liner w/ Seals, STD - Single liner. For Models: 1910, 2110, CL45, CL55. (Part No: SBA110126161) $52.32 [Enlarge Picture] Piston Pin Bushing - Pin bushing. For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30 (Part No: C9NN6207C) $11.30 Piston Pin Bushing - For models 9N, 2N, 8N. This piston pin bushing is.735 ID. Price shown is EACH, minimum order QTY is 4. (Part No: 21A6207A3) $3.14 [Enlarge Picture] Piston Sleeve - Sleeve only. Replacement for re-bore kits listed. Finished bore and honed. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30, (Part No: RBS514) $86.84 [Enlarge Picture] Piston Sleeve, 172 Gas or Diesel Engine - Standard sleeve with 3.9 inch bore, (4.1 in. Outside Diameter, press fit) for 172 CID gas or diesel engines on: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6055D) $29.58 [Enlarge Picture] Piston Sleeve, Finished 4.4 Inch Bore - Engines 401 CID diesel & turbo diesel, 192 CID gas, 201 Gas & diesel, 256 CID gas & diesel, 256 turbo diesel, 233 diesel, 268 non turbo & turbo diesel.Used when boring non sleeved engine. For Models: 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Part No: SD753) $34.81 Piston Sleeve, Semi Finished, 4.2 Inch Bore - Used when boring non sleeved engine, liner ID=4.2in, OD=4.35in . For models: 175 CID Diesel on;(2000 1965-1975), (2600 1975-1981), (3000 1965-1975), (4000 1965-3 1968). 192 GAS engine on; (3610 1981-4 1982), (3910 1981-4 1982), 233 Diesel engine on; (5000 1965-3 1968). (Part No: SD756) $37.43 Piston With Pin , STD, Diesels - Standard bore piston (4.4in bore) for 201, 256, 268 & 401 CID (3, 4, 6 cylinder) diesel engines on (1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Part No: E0NN6108AA) $102.96 Piston With Pin ,.020, Diesels - Overbore.020 piston for 201, 256, 268 & 401 CID (3, 4, 6 cylinder) diesel engines (4.4in bore) on (1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Part No: E0NN6108CA) $102.96 Piston With Pin ,.030, Diesels - Overbore.030 piston for 201, 256, 268 & 401 CID (3, 4, 6 cylinder) diesel engines (4.4in bore) on (1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Part No: E0NN6108DA) $102.96 Piston With Pin ,.040, Diesels - Overbore.040 piston for 201, 256, 268 & 401 CID (3, 4, 6 cylinder) diesel engines (4.4in bore) on (1965 to 1972): 4000, 4600, 6600, 6610, 6700, 6710, 8000. Rings not included. (Part No: E0NN6108EA) $102.96 Piston With Pin 020 - Piston, .020" oversize. For Models: 2000, 2600, 3000, 3600. (Part No: C5NN6108H) $146.62 [Enlarge Picture] Piston With Pin 020 - .020" oversize piston For 9000, 9200, 9600, (Part No: D5NN6108C) $111.55 Piston With Pin 020 - .020" oversize piston. For Models: 7610, 7710. (Part No: E7NN6108NA) $102.96 Piston With Pin 030 - .020" oversize piston For 9000, 9200, 9600, (Part No: D5NN6108D) $111.55 Piston With Pin 030 - .030" oversize piston. For Models: 7610, 7710. (Part No: E7NN6108PA) $102.96 Piston With Pin 040 - .040" oversize piston For 9000, 9200, 9600, (Part No: D5NN6108E) $111.55 Piston With Pin 040 - .040" oversize piston. For Models: 7610, 7710. (Part No: E7NN6108RA) $102.96 Piston With Pin STD - Standard bore piston For 7610, 7710, (Part No: E7NN6108LA) $95.65 Piston With Pin, 020 - For 256 Diesel engine (Oversize 0.020) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AC) $95.65 [Enlarge Picture] Piston With Pin, 030 - For 256 Diesel engine (Oversize 0.030) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AD) $102.96 [Enlarge Picture] Piston With Pin, STD - For 256 Diesel engine (Standard 4.4in.bore) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AA) $102.96 [Enlarge Picture] Piston With Rings 020 - .020" oversize piston For 9700, TW20, TW30, (Part No: D7NN6108C) $111.55 Piston With Rings 020 - .020" oversize piston For 7600, 7610, 7700, 7710, (Part No: D9NN6108HA) $111.55 Piston With Rings 040 - .040" oversize piston For 9700, TW20, TW30, (Part No: D7NN6108E) $111.55 Piston With Rings 040 - .040" oversize piston For 7600, 7610, 7700, 7710, (Part No: D9NN6108KA) $111.55 Piston With Rings STD - Standard bore piston For 7000, 7600, 7700, (Part No: D6NN6108Y) $111.55 Piston With Rings STD - Standard bore piston For 9700, TW20, TW30, (Part No: D7NN6108A) $111.55 Piston With Rings STD - Standard bore piston For 7600, 7610, 7700, 7710, (Part No: D9NN6108FA) $111.55 Piston With Rings, .020 - Oversize piston. For Models: 8000, 8200, 8600, 8700, TW10. (Part No: D5NN6108U) $120.08 Piston With Rings, .020 - Oversize piston. For Models: 7000, 7600, 7700. (Part No: D6NN6108AA) $120.08 Piston With Rings, .030 - Oversize piston. For Models: 8000, 8200, 8600, 8700, TW10. (Part No: D5NN6108V) $120.08 Piston With Rings, .030 - Oversize piston. For Models: 7000, 7600, 7700. (Part No: D6NN6108AB) $120.08 Piston With Rings, .030 - Oversize piston. For Models: 9700, TW20, TW30. (Part No: D7NN6108D) $123.06 Piston With Rings, .030 - Oversize piston. For Models: 7600, 7610, 7700, 7710. (Part No: D9NN6108JA) $123.06 Piston With Rings, .040 - Oversize piston. For Models: 8000, 8200, 8600, 8700, TW10. (Part No: D5NN6108X) $120.08 Piston With Rings, .040 - Oversize piston. For Models: 7000, 7600, 7700. (Part No: D6NN6108AC) $120.08 Piston With Rings, Std - Standard bore piston. For Models: 8000, 8200, 8600, 8700, TW10. (Part No: D5NN6108S) $120.08 Piston and Ring Kit - For 5000 with 233 CID, Diesel, 4 Cylinder, 1965-3 1968. Piston and Ring Kit contains Pistons, pins, retainers and rings. Standard Size. Also available are Oversize of.020 (PRK233-020), .030 (PRK233-030), and.040 (PRK233-040). When ordering, specify Oversize amount and appropriate part number in comments section of order form. (Part No: PRK233) $392.83 [Enlarge Picture] Piston and Sleeve Kit - For Dexta with 144 CID & 152 CID Perkins engines, 1953-1964. Piston and Sleeve Kit. Contains Pistons, Sleeves and Rings. For 1962 and prior, requires boring block to 3.6" and will increase power. Kit is For 1 Engine. (Part No: PK17A) $274.93 [Enlarge Picture] Piston and Sleeve Kit - For 5000 with 256 CID Diesel, 4 Cylinder, 4 1968-1975. Piston and Sleeve Kit contains Pistons, pins, retainers and rings. Also available in Oversizes of.020 (PRK256-020) and.030 (PRK256-020). When ordering, specify Oversize amount and appropriate part number in comments section of order form. (Part No: PRK256) $392.83 [Enlarge Picture] Piston and Sleeve Kit 172 Gas - Kit, press-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901 all with 3.9 inch bore. Has 4.1 OD. (Part No: FPN6055A) $214.26 Piston and Sleeve Kit 172 Gas - Kit, drop-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901 all with 3.9 inch bore. Has 4.098 OD. (Part No: FPN6055B) $200.90 Piston and Sleeve Kit, 3 Ring, .040 Sleeves - Kit contains C0NN6055B .040" sleeves, 8N6108B 3 ring pistons, chrome top & oil rail (8N6149G1) rings, pins & retainers. For Models: 2N, 8N, 9N. (Part No: APN6055E) $134.90 [Enlarge Picture] Piston and Sleeve Kit, 3 Ring, .090 Sleeves - Kit, (4) sleeves, pistons, chrome rings, piston pins and pin retainers. For 2N, 8N, 9N, (Part No: APN6055A) $146.75 [Enlarge Picture] Piston and Sleeve Kit, STD, 172 CID Diesel - For 801, 901, 4000, all with 172 CID, Diesel, 1953-1964. Piston and Sleeve Kit contains: (4) Pistons, Sleeve and Rings. 3.9 inch bore. (Part No: PK20) $355.92 [Enlarge Picture] Piston and Sleeve Set - Super Piston Set For 9N, 2N, 8N Increased horsepower up to 5% by use of.0825 wall sleeve, same outside diameter as heavy wall sleeve. Can be used in any application where.090 wall thickness sleeves are used..050 wall sleeves, .0825 oversize 4-ring pistons. ``Comes with Sleeves, Pistons, Rings and Retainers. (Part No: PK11) $196.84 [Enlarge Picture] Piston w/ Pin - standard piston bore size 4.2". For Models: 2000, 2600, 3000, 3600. All with either 158 CID or 175 CID 3 cylinder gas engines. (Part No: C5NN6108F) $146.62 [Enlarge Picture] Piston w/ Pin - Standard bore piston, 4.2" standard bore. For Models: 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108L) $95.65 [Enlarge Picture] Piston w/ Pin - .020" oversize piston, 4.2" standard bore. For Models: 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108N) $106.54 [Enlarge Picture] Piston w/ Pin - .040" oversize piston, 4.2" standard bore. For Models: 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108S) $106.54 [Enlarge Picture] Piston w/ Pin, .030 - .030" oversize piston, 4.2" standard bore. For Models: 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108R) $100.74 [Enlarge Picture] Piston w/ Rings - 4.2" standard bore. For Models: (2000, 3000 1965-1975), (2600, 3600 1975-1981). All with either 158 CID or 175 CID 3 cylinder gas engines. (Part No: RK150) $193.64 Piston, STD - Standard bore piston with pin. For Models: 9000, 9200, 9600. (Part No: D5NN6108A) $111.55 Piston, .020 Overbore, 172 CID Gas Engine - Overbore.020 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6108G) $39.91 Piston, .030 Overbore, 172 CID Gas Engine - Overbore.030 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6108H) $39.91 Piston, .040 Overbore, 172 CID Gas Engine - Overbore.040 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6108J) $39.91 Piston, 158 Diesel STD - Standard bore piston For 158 Diesel on 2000, 2600. Contains: (1) Piston with pins & retainers. (Part No: D4NN6108A) $99.69 [Enlarge Picture] Piston, 158 Diesel, .020 - .020" oversize piston. For Models: 2000, 2600. Contains: (1) Piston with pins & retainers. (Part No: D4NN6108C) $100.00 Piston, 158 Diesel, .030 - .030" oversize piston. For Models: 2000, 2600. Contains: (1) Piston with pins & retainers. (Part No: D4NN6108D) $100.00 Piston, 158 Diesel, .040 - .040" oversize piston for 158 Diesel on 2000, 2600. Contains: (1) Piston with pins & retainers. (Part No: D4NN6108E) $107.29 Piston, 3 Ring - For models 9N, 2N, 8N. This is a single 3 ring piston with standard bore can be used with .040 thin wall sleeves or.090 thick wall sleeves, and a 3 16 oil ring. (Part No: 8N6108B) $24.32 [Enlarge Picture] Piston, 4 Ring, With 3/16 Oil Ring - For models 9N, 2N, 8N. This is a single piston with a standard bore, 3 16 oil ring. Piston comes with Pin and Lock. This Price is for STANDARD. OVERSIZE ARE AVAILABLE, Please Specify size of std, .020, .030, .040, or .0825 in 'comments' when ordering. (Part No: P1003) $30.21 [Enlarge Picture] Piston, 4 Ring, With 5/32 Oil Ring - For models 9N, 2N, 8N. This is a single piston with 5 32 oil ring, standard bore. (Part No: 2N61084RS) $29.04 [Enlarge Picture] Piston, STD - 85mm w pin & keeper for 1 hole. For Models: 1910, 2110. Replaces SBA115016580. (Part No: SBA115317390) $56.35 [Enlarge Picture] Piston, STD, 172 CID Diesel - Standard (PK20) 5-ring piston (rings NOT included) with pin & locks for 4-cylinder 172 diesel engine on (1958 to 1964): 4000, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 313879) $109.10 Piston, STD, 192 CID Gas - For models 4000 (1965 to 3-1968). Piston is for a 192 CID gas 3-Cylinder with 4.4 inch standard bore. This piston is for one cylinder. (Part No: DOTZ6108F) $131.73 [Enlarge Picture] Piston, STD, 201 CID Gas - Standard piston with pin. 4.4in bore. For Models: 4000, 4600. (Part No: C7NN6108T) $107.85 Piston, Standard, 134 CID Gas Engine - Standard 3-ring piston (Rings NOT included) with pin & locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108F) $32.92 [Enlarge Picture] Piston, Standard, 172 CID Gas Engine - Standard 3-ring piston, 3.9in. bore, (Rings NOT included) w pin & locks. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6108F) $43.89 Piston,.020 Overbore, 134 CID Gas Engine - Overbore.020 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108H) $44.94 [Enlarge Picture] Piston,.030 Overbore, 134 CID Gas Engine - Overbore.030 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108J) $42.38 [Enlarge Picture] Piston,.040 Overbore, 134 CID Gas Engine - Overbore.040 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108K) $44.94 [Enlarge Picture] Rod Bushing - For 172 CID DIESEL in: 4000, 801, 901. (Part No: 310633) $13.70 Sleeve - Standard sleeve for 134 CID gas engine. For Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 2000. (Part No: EAE6055E) $27.76 [Enlarge Picture] Sleeve - Finished, bored sleeve. For DEXTA, SUPER DEXTA. (Part No: 960E6055) $47.90 Sleeve - Prefinished standard sleeve, hand pressure installed. Used in sleeve & piston kit CPN6055B. For 2000 SERIES, 501, 600, 700, NAA, Jubilee. (Part No: B3NN6055A) $27.72 [Enlarge Picture] Sleeve & Piston Kit - 134 Gas - Super Power Set - For 134 CID Gas engine. 3-1 2" overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA, Jubilee. (Part No: PK110) $306.24 [Enlarge Picture] Sleeve & Piston Kit, 172 Gas, STD - For (800, 801, 900, 901, 4000, Jubilee, all with 172CID Gas, 4 Cylinder (1955-1964), Standard bore. And for 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains pistons, sleeves, piston pins, retainers & chrome top and chrome steel rail oil control rings. (Part No: PK15G1) $218.06 [Enlarge Picture] Sleeve and Piston Kit, 134 Gas, STD - For NAA, Jubilee, 501, 600, 601, 700, 701, 2000 all with 134 CID Gas, 4 Cylinder 1953-1964, Standard bore. Also for 2000 using 134 CID Gas, 4 Cylinder 1962-1964, that were sleeveless (provided block is bored). Sleeve and Piston Kit contains pistons, sleeves, piston rings, piston pins & retainers. (Part No: PK14G1) $189.67 [Enlarge Picture] Sleeve and Piston Set - 1 Hole - 3 Ring Piston - .040 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT3A) $43.11 [Enlarge Picture] Sleeve and Piston Set - 1 Hole - 4 Ring Piston - .040 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT2A) $48.12 [Enlarge Picture] Sleeve and Piston Set - 1 Hole - 4 Ring Piston - .090 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT5A) $48.12 [Enlarge Picture] Sleeve and Piston Set, 1 Hole - 3 Ring Piston - .090 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT6A) $45.77 [Enlarge Picture] Sleeve, STD, 172 CID Gas - Standard sleeve. For Models: 4000, 800, 801, 900, 901 all with 3.9 inch bore, 4.098 Outside Diameter drop-in. Prefinished. (Part No: B3NN6055B) $29.47   Engine Rings 3 Ring Piston Ring Set w/ Chrome Top Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard Bore, CHROME top ring, 2@3 32 comp, 1@3 16 oil. Complete set for one engine. (Part No: 8N6149G1) $26.88 [Enlarge Picture] Piston Ring Set - 3-7 16" bore, 8 compression rings 3 32", 4 oil rings 3 16". Complete set for 1 engine. For Models: NAA, 501, 541, 600, 601, 700, 701, 2000, NAB. All with 134 CID engine. (Part No: 2C7501) $79.21 Piston Ring Set - For models Dexta with 144 CID (3 CYL) diesel. This is a standard 5-ring 3.5" bore. (Part No: 957E6149A) $106.05 Piston Ring Set - For Model: Super Dexta with 152 CID (3 CYL) diesel. This is a standard 5-ring 3.6" bore. (Part No: 960E6149) $41.95 Piston Ring Set , 4 Ring, - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard Bore, Cast Iron rings, 2@3\32 comp, 2@5 32 oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149-4RS) $29.26 [Enlarge Picture] Piston Ring Set , Standard, 172 CID Gas - Standard bore (3.9 in) 3-ring set. Set uses 2 compression rings at 3 32in (top is Chrome), and Steel rail oil ring at 3 16in. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6149A) $29.79 [Enlarge Picture] Piston Ring Set , Standard, 172 CID Gas, CAST IRON - CAST IRON set, Standard, (Standard bore is 3.9 in) 3-ring set. Set uses 2 compression rings at 3 32in , and oil ring at 3 16in. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: FPN6149A) $24.42 [Enlarge Picture] Piston Ring Set ,.020, 172 Gas - Overbore.020 (Standard bore is 3.9 in) 3-ring set. Set uses 2 compression rings at 3 32in (top is Chrome), and Steel rail oil ring at 3 16in. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: FPN6149G) $90.41 Piston Ring Set ,.020, 201 CID Diesel - .020" oversize ring set for 1 cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Part No: CFPN6149BD) $24.40 Piston Ring Set ,.030, 172 CID Gas - Overbore.030 (Standard bore is 3.9 in) 3-ring set. Set uses 2 compression rings at 3 32in (top is Chrome), and Steel rail oil ring at 3 16in. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6149B) $42.78 Piston Ring Set Overbore - Complete set for 1 engine. 4 Cylinder gas 3.9 inch bore with .040 overbore with 2 compression at 3 32 and 1 oil ring at 3 16. (Part No: 2C7673.040) $58.05 Piston Ring Set, 134 Gas, .020 - Overbore 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .020 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: CPN6149H) $25.53 Piston Ring Set, 134 Gas, .030 - Complete Overbore 3-ring set cast iron. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .030 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: EAE6149B) $25.53 Piston Ring Set, .0825 Oversize - Plain top ring, 3 16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-0) $39.18 [Enlarge Picture] Piston Ring Set, 134 Gas, STD - Standard 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: CPN6149B) $29.68 Piston Ring Set, 134 Gas, STD, Chrome Top Ring - Standard 3-ring set with Chrome Top Ring. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: EAE6149A) $39.72 [Enlarge Picture] Piston Ring Set, 220 CID Diesel - Sizes available are STD, .010, .020, .030 or .040 (Specify size needed in 'COMMENTS' when ordering. For models Major, Super Major all with 220 CID Diesel Engine. This set is for 4 cylinders, each using (3) 3 32 compresssion rings and (2) 3 16 oil rings (5 rings per cylinder). Made in USA. (Part No: 2C5837) $123.19 Piston Ring Set, 3 Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard 3 Ring, CHROME top ring, 5 32 steel rail oil. Complete set for one engine. (Part No: 9N6149A) $27.76 [Enlarge Picture] Piston Ring Set, 3 Ring, Plain - For 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard, Plain top ring, 3\16" steel rail oil. Complete set for one engine. (Part No: 8N6149A5) $28.68 [Enlarge Picture] Piston Ring Set, 3 ring - For models 9N, 2N, 8N. Ring set for 3 ring piston with standard bore. This is a SINGLE piston ring set with 3 16 oil ring. (Part No: RST6G1) $8.50 [Enlarge Picture] Piston Ring Set, 4 Ring - Chrome .030" O.S., 3 16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-030) $39.18 [Enlarge Picture] Piston Ring Set, 4 Ring - Chrome .040" O.S., 3 16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-040) $39.18 [Enlarge Picture] Piston Ring Set, 4 Ring - Chrome.020 O.S., 3\16 steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-020) $39.18 [Enlarge Picture] Piston Ring Set, 4 Ring - Chrome. For Ford 2N, 8N, 9N tractors (1939-1952 w 4-cyl. flat head engines) For 4-ring center pin pistons. Std. top rings, 5 32" steel rail oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149G1) $32.37 [Enlarge Picture] Piston Ring Set, 4 Ring - For Models: 2N, 8N, 9N tractors (1939-1952 w-4-cyl. flat head engines) For 4-ring pistons. Std., plain top rings, 3-16 steel rail oil. Also available in.020, .030, and.040 oversize w- chrome top, 3-16 steel rail oil. Please specify size desired when ordering. Complete for 1 engine, 4 cylinders. (Part No: PR1003) $39.18 [Enlarge Picture] Piston Ring Set, Diesel, .020 - Diesel 4.2in. bore 3&4 cylinder engines, 158, 175 & 233 CID. .020 Oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AT) $27.38 Piston Ring Set, Diesel, .030 - Diesel 4.2in. bore 3&4 cylinder engines, 158, 175 & 233 CID. .030 oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AU) $27.40 Piston Ring Set, Diesel, .040 - Diesel 4.2in. bore 3&4 cylinder engines, 158, 175 & 233 CID. .040 oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AV) $23.95 Piston Ring Set, Diesel, STD - Diesel 4.2in. bore 3&4 cylinder engines, 158, 175 & 233 CID. Standard ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AS) $28.00 Piston Ring Set, Gas, .020 - For models 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 & 175 CID 3-Cylinder gas engine with. This a set for one piston. Three sets needed per engine. (Part No: CFPN6149AZ) $26.26 [Enlarge Picture] Piston Ring Set, Gas, .040 - For Models: 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 & 175 CID 3-Cylinder gas engine with. This a set for one piston. Three sets needed per engine. (Part No: CFPN6149BB) $26.26 [Enlarge Picture] Piston Ring Set, Gas, STD - For Models: 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 & 175 CID 3-Cylinder gas engine with. This a set for one piston. Three sets needed per engine. (Part No: CFPN6149AY) $23.95 [Enlarge Picture] Piston Ring Set, Overbore,172 CID Gas - For Models: 800, 801, 900, 901, 4000 all 1953-1964 with 172 gas 3.9 inch bore engines. This ring set is for 4" Overbore, with 2 compression rings at 5 64, 3 32 and oil at 3 16. (Part No: PRS109) $38.92 Piston Ring Set, STD, 201 CID Diesel - Standard ring set for 1 piston. For Models: 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold per Cylinder. (Part No: CFPN6149BC) $23.34 Piston Ring Set, Standard, 172 CID Diesel - Standard 5-ring set. Complete set for 4-cyl 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AA) $57.50 Piston Ring Set,.020, 172 CID Diesel - Overbore.020 5-ring set. Complete set for 4-cyl 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AB) $67.25 Piston Ring Set,.030, 172 CID Diesel - Overbore.030 5-ring set. Complete set for 4-cyl 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AC) $135.66 Piston Ring Set,.030, 201 CID Diesel - .030" oversize ring set for 1 cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Part No: CFPN6149BE) $24.40 Piston Ring Set,.040, 172 CID Diesel - Overbore.040 5-ring set. Complete set for 4-cyl 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AD) $108.28 Piston Ring Set,.040, 201 CID Diesel - .040" oversize ring set for 1 cylinder. For 4000, 4600, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Part No: CFPN6149BF) $24.40 Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32in.), 4. Number and size of oil rings for each piston (Ex: (1) 5 32in.). (Part No: RING SETS) $0.00 Piston Rings - for one piston. For Models: (3000 1965-1975), (3600 1975-1981), (5000 1965-3 1968), (5600 1975-9 1980), (5700 1975-9 1980). (Part No: PR188) $15.57 Piston Rings,.020, 192-201 CID Gas - Oversize.020. For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BH) $26.92 [Enlarge Picture] Piston Rings,.040, 192-201 CID Gas - Oversize.040. For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BK) $26.92 [Enlarge Picture] Piston Rings-,Standard, 192-201 CID Gas - For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BG) $26.92 [Enlarge Picture] Pistons Ring Set, 144 Diesel, STD - For Models: 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771 (1958-1964) all with 144 CID Diesel Engine. This is a standard 4 ring set with 12 compression rings @ 3 32" & 4 oil rings @ 3 16". (Part No: C5NN6149T) $57.32 Ring Set - .020" oversize ring for 1 piston. For Models: 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: DFPN6149B) $44.92 Ring Set - .030" oversize ring for 1 piston. For Models: 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: DFPN6149C) $44.92 Ring Set - .040" oversize ring for 1 piston. For Models: 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: DFPN6149D) $44.92 Ring Set - Standard ring for 1 piston. For Models: 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: DFPN6149E) $42.45   Exhaust System Clamp - Bracket, rear muffler. EXACT of ORIGINAL. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 9N5260) $17.67 [Enlarge Picture] Elbow to Exhaust Manifold Gasket - Fits 134 CID gas engines 1953-1964 on Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771 and 172 CID gas engines 1955-57 on Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Use with elbow NAA55250B & muffler NAA5230E. **Price per each. (Part No: NAA55232A) $3.50 [Enlarge Picture] Elbow to Exhaust Manifold Gasket - For 172 CID gas engines 1958-1964 on Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. Use with elbow 310075 & muffler 310079. Must be ordered in multiples of 5. Price is per each. (Part No: 310074) $1.77 [Enlarge Picture] Exhaust Elbow - Outlet is 1 5 8" O.D. For 2000, 501, 600, 700, 800, 900, NAA, Jubilee, all with 134 or 172 CID engine. (Part No: NAA55250BWG) $23.70 [Enlarge Picture] Exhaust Elbow - Fits: Fordson Major, Power Major, Super Major. Gasket (p n S.66130) available. Specify in COMMENTS when ordering , if needed. (Part No: E1ADKN9488) $45.64 [Enlarge Picture] Exhaust Elbow With Gasket - Exhaust elbow with gasket. Outlet 2" O.D. For Models: 4000, 801, 901, w 172 gas engines. (Part No: 310075WG) $18.95 [Enlarge Picture] Exhaust Elbow w/ Gasket - For Models: 5610, 6610, less cab, less air 9 1985 and up. (Part No: E0NN5246AA12B) $46.64 [Enlarge Picture] Exhaust Manifold - Vertical exhaust for diesel model: 7000(1970 to 1975). Gaskets NOT included. (Part No: D1NN9430A) $159.90 [Enlarge Picture] Exhaust Manifold - For diesel models:5610, 5900, 6610, 6710, 7600. Gaskets NOT included. (Part No: D3NN9430D) $135.30 [Enlarge Picture] Exhaust Manifold - Front section for diesel. For Models: 8000, 8600, 9000, 9600. Gaskets NOT included. (Part No: C9NN9430B) $96.10 [Enlarge Picture] Exhaust Manifold - Rear section For models: 8000, 8600, 9000, 9600.Gaskets NOT included. (Part No: C9NN9431B) $139.90 [Enlarge Picture] Exhaust Manifold - Front section. For Models: 7910, 8210, 8700, 9700, TW20, TW10, TW30.Gaskets NOT included. (Part No: D8NN9430AB) $162.51 [Enlarge Picture] Exhaust Manifold - Rear section. For Models: 7910, 8210, 8700, 9700, TW10, TW20, TW30. Gaskets NOT included. (Part No: D5NN9431A) $90.94 [Enlarge Picture] Exhaust Manifold - For 3 cylinder Models: 3010S, 3830 Orchard. Gasket available as part S.62446 requires 3 sold seperately. (Part No: 4607842) $50.59 [Enlarge Picture] Exhaust Manifold - Front. For Models: 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces D8NN9430AB. (Part No: R0291) $124.67 [Enlarge Picture] Exhaust Manifold - Rear. For Models: 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces OEM# D5NN9431A. (Part No: R0292) $68.72 [Enlarge Picture] Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448) $2.50 [Enlarge Picture] Exhaust Manifold Gasket - For the C5NE9430A manifold. (Part No: S.65946) $6.00 [Enlarge Picture] Exhaust Manifold Gasket - For Models 550, 555, 8401, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600. (Part No: C5NE9448A) $9.95 [Enlarge Picture] Exhaust Manifold Gasket - For Fordson Major. (Part No: S.66557) $5.00 [Enlarge Picture] Exhaust Manifold w/ Angled Mtg Holes - For 220 CID 4-cyl DIESEL in: Fordson Major, Power Major & Super Major, ALL using angled Mounted Holes on manifold. Exhaust Manifold without gasket. 2 piece gasket set shown in picture is available as part # S.66557. Specify in COMMENTS when ordering if needed. (Part No: S.61645) $129.90 [Enlarge Picture] Exhaust Manifold, 4 Cylinder - For Models: (4330 vineyard), (4430 orchard), 4835, 5635. Gaskets available as p n S.62446 (4 required). Please specify in comments section if needed. (Part No: 4606570) $56.82 [Enlarge Picture] Exhaust Manifold, Horizontal - For Dexta, Super Dexta. Exhaust Manifold for HORIZONTAL muffler. In comments section of order form state, "Include Gaskets, Part #S.41348 at $4.00 for qty 2 makes one set." (Part No: 957E9430B) $56.10 [Enlarge Picture] Exhaust Manifold, Vertical - For the following tractors with 4 cyl engines: 5000, 5100, 5200, 5900. INDUSTRIALS: 5500, 6500. Gasket (p n S.65947 available for $5.00 additional, Specify in COMMENTS when ordering if needed. ** $10 ADDED TO SHIPPING FOR THIS ITEM DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NE9430D) $61.99 [Enlarge Picture] Exhaust Manifold, Vertical - Fits 3-cylinder tractors 1975 & newer: 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630. Gasket S.65946 available for an additional charge, specify this Part number in COMMENTS when ordering. (Part No: D3NN9430A) $49.70 [Enlarge Picture] Exhaust Manifold, Vertical - Fits the following 4 cylinder 1975 & newer(NON Turbo)tractors: 5030, 5600, 5610, 6000, 6610, 6700, 6710. Gasket (p n S.65947) available for $8 additional. When ordering specify in COMMENTS if needed. (Part No: D3NN9430B) $66.39 [Enlarge Picture] Exhaust Manifold, Vertical - For Dexta and Super Dexta. Exhaust Manifold for VERTICAL muffler. Without Gasket. If gasket is needed then state in 'COMMENTS' "Include Gaskets, Part #S.41348 at $4.00 for qty 2 makes one set." (Part No: 957E9430A) $48.95 [Enlarge Picture] Exhaust Manifold, w/Straight Mtg Holes - Uses Straight mounting holes. Fits: Fordson Major. 2 piece gasket set shown in picture is available as p n S.66947. Specify in COMMENTS when ordering if needed. (Part No: E1ADDN9429A) $138.00 [Enlarge Picture] Exhaust Pipe - Outlet pipe, front curved section. For Models: (501, 700, 701 Row crop models w 134 gas engines & 900 Row crop w 172 gas engine. (Part No: NCB5255B) $24.62 [Enlarge Picture] Exhaust Pipe, Curved - Outlet pipe, curved section. Outlet 1-1 2" O.D. For 134 CID gas engines. Tractors: 600 (1955-1957). 172 CID gas engines. Tractors: 800, 801 (1955-1962), 4000 (4 cyl, 1963-1964). Does not include row crop tractors. (Part No: NCA5255B) $24.42 [Enlarge Picture] Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, Jubilee, 2000 (1963-1964), 501, 600, 601 (1958-1962 w 134 gas engine), 700, 701 (1958-1962 w 134 gas engine), 800 (1955-1957 w 172 gas engine). Dimensions: Inlet ID = 1-1 2in., Length = 54in., Outlet OD = 1-1 2in. (Part No: NCA5263B) $25.12 [Enlarge Picture] Exhaust Pipe, Horizontal - For Diesel 2000, 3000 except 2300, 2310, 3300, 3310, all 4-1969 and up. For Gas 2000, 3000, 4-1969 and up. For 2600, 3600, 1975 and up. Underslung Exhaust Pipe, Manifold to Muffler Pipe. (Part No: C7NN5245B) $33.67 [Enlarge Picture] Exhaust Pipe, Horizontal, 2 Piece - Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. (Part No: NAA5255D) $35.15 [Enlarge Picture] Exhaust Pipe, Vertical - Used with exhaust manifold D3NN9430A. For Models: 2600, 3600, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, (4640 less turbo), 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B. (Part No: D6NN5246N) $59.45 [Enlarge Picture] Extension Pipe - Vertical two-piece exhaust pipe with clamp, less muffler. For use without muffler, straight through design for maximum exhaust flow-more power. Vertical height remains the same as assemblies with muffler. Inlet 1-1 2" I.D.Outlet 1-1 2" O.D. For 2N, 8N, 9N, (Part No: M104) $28.39 [Enlarge Picture] Extension Pipe - Vertical two-piece exhaust pipe with clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5 8" I.D., outlet 1-3 4" O.D. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: M105) $29.94 [Enlarge Picture] Extension Pipe - Vertical exhaust pipe with clamp, less muffler. One piece pipe, makes 2 90 degree turns up and around hood for vertical exhaust with muffler in original horizontal position. For Models: 4000, 801, 901. (Part No: M1110) $41.19 [Enlarge Picture] Extension Pipe, Curved - Outlet pipe, curved section. Not for row crop or grove. Inlet 1-3 4" I.D. outlet 1-3 4" O.D. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cyl, 1958-1964). (Part No: 311051) $26.58 [Enlarge Picture] Extension Pipe, Straight - Outlet pipe extension, straight section. Inlet 1-3 4" I.D. outlet 1-3 4" O.D. 60" length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cyl, 1958-1964). Not for row crop, grove, Select-O-Speed. (Part No: 311050) $25.60 [Enlarge Picture] Extension Pipe, Straight - Outlet pipe extension, straight section. Inlet 1-3 4" I.D. outlet 1-3 4" O.D. 60" length. For 172 CID gas engines, row crop models. Tractors: 901, 4000 (4 cyl, 1958-1964). Not for Select-O-Speed. (Part No: 311466) $25.60 [Enlarge Picture] Intake & Exhaust Manifold Gasket - For gas engine Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All from 1953-1964. Price is for each-2 needed per tractor (Part No: C0NN9448C) $2.82 [Enlarge Picture] Intake & Exhaust Manifold Gasket, Diesel - For 172 CID diesel engine Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. All 1958-1964. Sold in minimum qty of 4. Price is for each (Part No: 310658) $5.42 [Enlarge Picture] Manifold - High Quality Intake and Exhaust Manifold w Gaskets. For 9N, 2N, 8N. (Part No: 9N9425WG) $65.91 [Enlarge Picture] Manifold Nut & Washer Kit - Brass nut & washer kit (Kit contains 4 nuts & 4 Washers) for intake & exhaust manifold. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 33816-KIT) $10.16 [Enlarge Picture] Manifold, Exhaust, Horizontal - Horizontal Exhaust For the following 1965 & newer tractors with 3 Cylinder Gas or Diesel: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 4000, 4600 ``**DOES NOT COME WITH GASKET** Order Gasket part number S.65946. (Part No: C5NE9430A) $57.28 [Enlarge Picture] Manifold, Gas - Intake - Exhaust Manifold For 4 cylinder gas engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accomodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG) $148.65 [Enlarge Picture] Manifold, Vertical - Vertical Exhaust Manifold For 3 cylinder used in 2000, 3000, 4000. Gasket (p n S.65946)available for an additional charge, specify in COMMENTS on order form if needed. (Part No: C5NE9430E) $56.50 [Enlarge Picture] Muffler - Oval muffler, aluminized. Inlet 1-3 4" I.D., outlet 1-3 4" O.D., overall length 29" For 2000, 3000, (Part No: C5NN5230AH) $45.46 [Enlarge Picture] Muffler - Oval muffler, aluminized. Inlet 1-3 4" I.D., outlet 1-3 4" O.D., overall length 29". For Model: 4000. (Part No: C5NN5230AJ) $45.46 [Enlarge Picture] Muffler - Oval muffler. Inlet 1-7 8" I.D. Outlet 2" O.D., 29" overall length. For Models: 2000, 3000, 4000, 4100, 4600, 5000, 6600. (Part No: C5NN5230AR) $49.90 [Enlarge Picture] Muffler - Oval muffler, aluminized. Inlet 1-3 4" I.D., outlet 1-3 4" O.D., overall length 20-1 2". For 2000, 2600, 3000, 3600, 4000, 5000, (Part No: C7NN5230G) $48.67 [Enlarge Picture] Muffler - Round muffler, aluminized. This high quality muffler has internal baffles and a black enamel heat treated finish. Inlet 1-7 8" I.D. Outlet 2" O.D., DIM A = 29" overall length. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A & FO17. (Part No: C7NN5230JM) $39.70 [Enlarge Picture] Muffler - Vertical muffler, 4" round body, aluminized. Inlet 2-7 8" I.D., Outlet 3" O.D., 41" overall length. For 8200, 8600, 9200, 9600, (Part No: C9NN5230C) $69.57 Muffler - Oval muffler, aluminized. Inlet 1-7 8" I.D. Outlet 2" O.D., 39" overall length. For 2000, 3000, 4000, 4100, 4600, 5000, 6600, (Part No: D5NN5230D-E) $69.24 [Enlarge Picture] Muffler - Vertical muffler, oval, aluminized. Inlet 2-3 4" I.D., Outlet 3" O.D., 44" overall length. For 8700, TW10, (Part No: D5NN5230S) $112.80 [Enlarge Picture] Muffler - Oval muffler, aluminized. Inlet 2-3 8" I.D. Outlet 2-1 2" O.D., 38" overall length. For 7000, (Part No: D6NN5230V) $71.30 [Enlarge Picture] Muffler - Vertical muffler, oval. Inlet I.D. 1-7 8", outlet O.D. 2", overall length 49". For 231, 232, 4100, 4600, 515, 531, 535, 5600, 6600, 6700, (Part No: D9NN5230EA17M) $76.69 [Enlarge Picture] Muffler - Oval muffler, for vertical exhaust, aluminized. Inlet 1-7 8" I.D., Outlet 2" O.D., 49" overall length. For 2000, 230A, 231, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 420, 532, (Part No: E4NN5230FA17M) $83.16 [Enlarge Picture] Muffler - Oval muffler, for horizontal exhaust, aluminized. Body 4 1 2" X 9" shell dimension, 26 1 2" shell length, 41" overall length, 6" inlet length, 1 7 8" inlet I.D, 8 1 2" outlet length, 2" outlet O.D. For Models: 2910, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 515, 531, 535, 5600, 5700, 6500 late 6600, 6700, (Part No: E4NN5230GB) $88.90 [Enlarge Picture] Muffler - Heavy-duty horizontal muffler only. Inlet 1-1 2" I.D., outlet 1-1 2" O.D., body length 23". For 2N, 8N, 9N. Does not come with hardware. (Part No: M1002) $37.62 [Enlarge Picture] Muffler - Vertical muffler. Inlet 1-1 2" I.D. Outlet 1-1 2" O.D. For 2N, 8N, 9N, (Part No: M102-0) $33.22 [Enlarge Picture] Muffler - Vertical two-piece, muffler and pipe with clamp. Custom design ready for assembly. Pipe inlet flared, outlet 1-1 2" O.D. For 2N, 8N, 9N, (Part No: M102) $45.97 [Enlarge Picture] Muffler - Vertical muffler, 4-1 4" round body. Inlet I.D. base plate, outlet O.D. 1-3 4", overall length 28-1 2". For 1500, 1700, 1720, 1920, 2120, 3415. Mounting flange is four bolt, 2 1 8 inches center to center on bolt holes. (Part No: SBA314102140) $106.86 [Enlarge Picture] Muffler - Fits: Fordson Major, Power Major, Super Major. (Part No: E1ADDN5230A) $40.80 [Enlarge Picture] Muffler - For Models: (5610S s n 308716M and up w emissionized engine), (5640, 6640, 6640O 1-1-1997 and up), (6810S mexico only), (TS90 w emissionized engine). Replaces VPE8208. (Part No: 82011360) $182.97 [Enlarge Picture] Muffler - For Models: 7635, (LT90, LT100 less cab). (Part No: 5169716) $153.81 [Enlarge Picture] Muffler - For Models: (5640, 6640, 7740 5 1997 and up). Replaces E9NN5230CD17M. (Part No: 82009292) $271.31 [Enlarge Picture] Muffler - For Models: 4835, 5635, 6635, LT70, LT80. (Part No: 5167695) $168.33 Muffler - A= 1.625" outlet OD, B= 1.750" inlet OD, C= 26.750" overall length. For Models: 3435, 3935, 4135. Replaces 5103482, 5130676, 5131866, 4997328, 5131867, 5122884, 4997325, 5122889, 5100920, 5103480. (Part No: 5157240) $63.67 [Enlarge Picture] Muffler - For Models: (2550 Windrower s n up to 606630), (7740 from 11 1-1991 to 12 31-1996). Replaces 89806174, 83990911, 81866199, 9806174, E9NN5230DB17M, E9NN5230DA17M, E9NN5230DA, VPE8100. (Part No: 82009293) $187.70 [Enlarge Picture] Muffler - For Models: 8360, 8560, TM125, TM135, TM150, TM165, TV140. Replaces 82008337, 82002884. (Part No: 82010811) $247.73 [Enlarge Picture] Muffler - For 2000, 3000, 2600, 3600, 2610, 3610, 340, 445, 540, 335, 420, 230A. Muffler - Highest Quality. Black Enamel Finish. (S.14518) (Part No: E4NN523OFA) $74.90 [Enlarge Picture] Muffler - A=42", B=7", C=27", D=8", 1-7 8" inlet, 2" outlet. For Models: 4000, 5000, 4100, 4600, 4610, 5000, 5600, 5900, 6600, 6700, 650, 6500 late style, 515, 531, 535. Muffler - Highest Quality. Black Enamel Finish. (Part No: S.14520) $77.48 [Enlarge Picture] Muffler - For 5610, 6610, 6710 after 1981, 7500, 750, 755 with cab. Muffler, Highest Quality. Black Enamel Finish. (S.14519) (Part No: E4NN5230DA) $69.23 [Enlarge Picture] Muffler - High quality muffler for 2000, 3000, 4000 (except rowcrop), 5000(except rowcrop), 5500, 5550, 5900. Overall length = 41-1 2in., body length = 15-1 2in., inlet tube = 13in, outlet 2 inch outside diamtert = 12-1 2in. Black Enamel Finish. (Part No: C5NN5230R) $49.68 [Enlarge Picture] Muffler - For gas & diesel Horizontal Muffler 5000 1965 and up, 5100 & 5200 1966 and up. Oval, aluminated. Inlet 1 3 4" ID, outlet 1 3 4" OD. Overall length 19 1 4". Replaces C5NN5230F. (Part No: C5NN5230AD) $40.05 [Enlarge Picture] Muffler - For Industrials 550, 555A, 555B, 655, 655A, all 1975-1988, Horizontal Muffler. 5 1 2" round body, inlet 1 7 8" ID, outlet is bent pipe, overall 55" length. (Part No: D6NN5230F17M) $79.15 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 1 2 Overall Length - 38 For 5110, 7000, 7100, 7200, 7600 with 4 Cylinder Diesel Engine. OEM# D5NN5230V, D9NN5230FA, Use R1753 Clamp, Use R1802 Rain Cap (Part No: R1633) $70.37 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 Outlet O.D. - 2 Overall Length - 29 For 6000 with 6 Cylinder Diesel Engine. OEM# , Use R1751 Clamp, Use R1800 Rain Cap (Part No: R1635) $54.13 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 3 8 Outlet O.D. - 2 1 2 Overall Length - 36 For 7000, 7100, 7200 with 4 Cylinder Diesel Engine. Use R1753 Clamp, Use R1802 Rain Cap. (R1634) (Part No: D2NN5230A) $53.46 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 3 4 Outlet O.D. - 3 Overall Length - 44 For 8700, TW10 with 6 Cylinder DieselEngine. OEM# , Use R1755 Clamp, Use R1805 Rain Cap (Part No: R1637) $105.88 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 3 1 2 Outlet O.D. - 3 1 2 Overall Length - 44 1 2 For 9600, 9700, TW10, TW20, TW30 with 6 Cylinder Diesel Engine. OEM# , Use R1758 Clamp, Use R1806 Rain Cap (Part No: R1638) $172.88 Muffler - Vertical Exhaust Inlet I.D. - 2 3 4 Outlet O.D. - Bent Pipe Overall Length - 47 For TW-5, TW-10. OEM# , Use R1755 Clamp (Part No: R2833) $116.58 [Enlarge Picture] Muffler - With Aspirator Tube Vertical Exhaust Inlet I.D. - 3 1 2 Outlet O.D. - Bent Pipe Overall Length - 50 1 2 For TW-30. OEM# , Use R1755 Clamp (Part No: R2834) $192.95 [Enlarge Picture] Muffler - With Dual Inlet Tubes Vertical Exhaust Inlet I.D. - 2 1 2 Outlet O.D. - 3 7 8 Overall Length - 43 For 118, 145 4WD Articulated with 6 or 8 Cylinder Diesel Engine s. OEM# , Use R1753 Clamp, Use R1807 Rain Cap (Part No: R1639) $175.07 [Enlarge Picture] Muffler - With Dual Inlet Tubes Vertical Exhaust Inlet I.D. - 2 1 2 Outlet O.D. - 3 Overall Length - 43 For 300 Hydro -Mech with V-6 CumminsDiesel Engine. OEM# , Use R1753 Clamp, Use R1805 Rain Cap (Part No: R1641) $140.35 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 Outlet O.D. - 2 Overall Length - 14 For 400 Swather with Gas Engine. OEM# , Use R1751 Clamp, Use R1800 Rain Cap (Part No: R1642) $48.16 [Enlarge Picture] Muffler - Horizontal Exhaust Inlet I.D. - 2 Outlet O.D. - 2 Overall Length - 26 For 400, 4400 Swather with Gas Engine. OEM# , Use R1751 Clamp (Part No: R1643) $89.60 [Enlarge Picture] Muffler - Vertical Exhaust Inlet I.D. - 2 1 2 Outlet O.D. - 2 1 2 Overall Length - 19 For 4400 Swather with Diesel Engine. OEM# , Use R1753 Clamp, Use R1802 Rain Cap (Part No: R1644) $135.31 [Enlarge Picture] Muffler - Vertical muffler, 6" round body. Inlet I.D. 2-3 8", outlet O.D. 2-1 4", overall length 31". For 4835, 5635, 6635, 7635, 7810, (Part No: 83959846) $115.00 [Enlarge Picture] Muffler - Vertical muffler only. For DEXTA, SUPER DEXTA. (Part No: 957E5230D) $39.66 [Enlarge Picture] Muffler & Pipe Assembly - For the following 144ci diesel tractors: 501, 601, 701, for the 4-cylinder 2000 series (1958-64). Also for the following 172ci gas diesel tractors: 801, 901, 1801, the 4-cylinder 4000 series (1958-64). This vertical two-piece muffler and pipe includes clamp. Custom design ready for assembly. Pipe inlet 2" ID, outlet 2" OD. (Part No: M1111) $54.90 [Enlarge Picture] Muffler & Pipe Assembly, Vertical - For the following 134ci gas tractors: (NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-64). For the following 172ci gas tractors: (800, 900, ALL1955-57), and the 4-cylinder 4000 series (1958-64). This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5 8" ID, outlet 1-3 4" OD. (Part No: M103) $45.22 [Enlarge Picture] Muffler Clamp - Flanged Muffler Clamp. For Models: 8N, 2N, 9N. (Part No: FP185) $5.50 [Enlarge Picture] Muffler and Pipe Assembly - Horizontal muffler & pipe, one piece welded assembly for 9N, 2N, 8N with under-hood exhaust. (Part No: 8N5230) $29.90 [Enlarge Picture] Muffler and Pipe Assembly - Vertical one-piece muffler and pipe assembly, custom design. For 9N, 2N, 8N. Pipe inlet flared, outlet 1-1 2 O.D. (Part No: M200) $52.22 [Enlarge Picture] Muffler, Horizontal - Oval body. Inlet 1-3 4" I.D, outlet 1-3 4" O.D, 19-1 2" overall length. For 3 cylinder diesel Models: 4000 1965 to 1974, 4610SU 1982 to 1990. (Part No: C7NN5230H) $70.38 [Enlarge Picture] Muffler, Horizontal - For Models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 4-Cyl 2000(1953-1964), 800, 820, 840, 900, 950, 960, (1955-1957), 4-CYL 4000 Series(1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length = 2-1 4in, Inlet tube ID = 1-5 8in, Shell length = 13in, Shell diameter = 3-1 4in, Outlet tube length = 2-1 4in, Outlet tube OD = 1-5 8in., Muffler overall length = 17-1 2in. (Part No: NAA5230E) $29.52 [Enlarge Picture] Muffler, Horizontal - 2" inlet I.D, 1-7 8" outlet O.D, 13-1 2" shell length, 17-1 2" overall length, 3-1 2" body dia. For Models: 1801, 2000, 4000, 501, 601, 701, 801, 901, (Part No: 310079) $35.22 [Enlarge Picture] Muffler, Vertical - 6" inlet length, 15" shell length, 2" outlet length, 1-1 2" outlet O.D, 24" overall length, round body. For Models: 1110, 1210, 1310, 1510, 1710, 1910 all between 1983-1987. (Part No: 314100521) $72.20 [Enlarge Picture] Muffler, Vertical - Oval body. Inlet 2-3 4" I.D, outlet 2-3 4" O.D, 47" overall length. For Models TW5, TW10. (Part No: E4NN5230CA17M) $132.42 [Enlarge Picture] Muffler, Vertical - Oval body. Inlet 3-1 2" I.D, outlet 3-1 2" O.D, 48" overall length. For Models: 8630, 8730 6 cyl. 1990 to 1993, 8830, TW15, TW20, TW25, TW35. (Part No: E4NN5230BA17M) $117.02 [Enlarge Picture] Muffler, Vertical - Oval body with Rasporator Tube. Inlet 3-1 2" I.D, outlet 3-1 2" O.D, 50-1 2" overall length. For Models: TW30TW25, TW35, 8730, 8830 (Part No: E4NN5230AA17M) $226.38 [Enlarge Picture] Muffler, Vertical - Round body 9" shell diameter, A= 1-1 2" inlet length, B= 3" inlet ID, C= 27-1 2" shell length, D= 3" outlet length, E= 3" outlet ID, F= 32" overall length. For Models: (A64, A66 both from 1974 to 1983). (Part No: D4NN5230F) $120.12 [Enlarge Picture] Muffler, Vertical - Round body 5-1 2" shell diameter, A= 3-3 4" inlet length, B= 1-7 8" inlet ID, C= 26" shell length, D= Bent pipe, E= 2" outlet OD, F= 60" overall length. For Model: 550 from 1975 to 1978 w 3 cylinder gas or diesel engine. (Part No: D9NN5230HA17M) $128.93 [Enlarge Picture] Muffler, Vertical - 4-Hole base plate, outlet OD = 1 3 4", overall length = 24 inch, 4 1 4 inch diameter muffler. For Models: (1300, 1500, 1900 all built from 1979 to 1982). (Part No: 314100350) $93.48 [Enlarge Picture] Muffler, Vertical - Inlet ID = 3", outlet OD = 2 3 4", overall length = 43", use R1755 Clamp. For Model: 9030. (Part No: 09702857) $103.84 Muffler, Vertical - With aspirator Tube, inlet ID = 3 1 2", outlet OD = 3 1 2", overall length = 18". For Models: 1086, (1486, 1586 w aspirator kit), 5088, 5288, 5488. (Part No: 144057C5) $233.22 Pipe - Inlet adapter pipe, 13-1\2 overall length. For Models: 2000, 3500, 4000, 5000. (Part No: D0NN5B255C) $20.70 [Enlarge Picture] Pipe - Inlet adapter pipe, 15-1\2 overall length. For Models: 3000, 4200. (Part No: D0NN5B255D) $22.32 [Enlarge Picture] Stainless Steel Exhaust Pipe - Horizontal, free flow exhaust, fits the same as original but there is NO Muffler. It simply has the appearance of a muffler. For Models: 2N, 8N, 9N. (Part No: R4883) $194.80 [Enlarge Picture] Vertical Exhaust Pipe(Less Muffler) - For Models NAA, Jubilee501, 600, 700, 4-Cyl 2000(1953-1964), 800, 900(1955-1957), 4-CYL 4000 Series(1958-1964).All with 134 and 172 CID gas engines.Kit includes exhaust pipe with clamp.Does not include muffler. (Part No: NAA55237A) $34.11 [Enlarge Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11 16 inch inlet and 1 3 4 inch outlet. This is one piece welded construction. (Part No: FD2110) $56.65 [Enlarge Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee all with gas engines. Vertical Muffler & Pipe 2 piece Assembly has 1 3 4 inch inlet and 1 3 4 inch outlet. Comes with clamp to fasten muffler to pipe. (Part No: FD1210) $39.95 [Enlarge Picture]   Fuel System / Air Intake Adjustable Needle Assembly - Main adjusting needle. For Models: 4000, 801, 901. (Part No: C3NN9G504A) $15.16 [Enlarge Picture] Air Cleaner Hose - For models 1953-1957. Rubber hose is not like original metal tube. For Models using 134 172 gas engine: 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: 311112) $29.90 [Enlarge Picture] Air Cleaner Assembly - For Models: 700, 740, 750, 800, 820, 840, 900, 950, 960. Restoration Quality Air Cleaner Assembly. Includes cup. Also Replaces 312918. (Part No: C7NN9600J) $102.59 [Enlarge Picture] Air Cleaner Assembly - Fits 9N, 8N. Restoration Quality Air cleaner Assembly, Painted Red. Includes Air cleaner, & cup (with mesh). Will not accurately replace the style with the top wire mesh without modification. This Assembly has a solid cap with hole which can be cut off and replaced with a similar screen and lid or left as is, depending on the needs of the user. (Part No: 8N9600B) $92.45 [Enlarge Picture] Air Cleaner Assembly - For NAA, Jubilee, 600. Restoration Quality Air Cleaner Assembly. Includes cup. Also replaces EAE9600D. (Part No: 312917) $120.83 Air Cleaner Assembly - For 4000, 5000, 4100 1975 AND UP. Air Cleaner Assembly, Oil Bath Type, 7 inches Dia., 2.25 inch dia. inlet. (S.61385) (Part No: C5NE9600E) $60.95 [Enlarge Picture] Air Cleaner Assembly - For Models: 2000, 3000. Air Cleaner Assembly 6" diameter. Replaces C5NE9600A. These originally came in 6" or 7" Diameter. (Part No: C5NE9600F) $56.04 [Enlarge Picture] Air Cleaner Bowl - Clear plastic pre-cleaner bowl, 7 1 2 inch outside diameter, for 2-1 4 inch inlet pipe. For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 531, 5600, 5610, 5700. (Part No: C0NN9A663A) $10.64 [Enlarge Picture] Air Cleaner Bowl - Clear plastic pre-cleaner bowl, 7 1 2 inch outside diameter, for 2-1 4 inlet pipe. For 5910, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 9000, TW10, TW20 (Part No: C0NN9A663A) $10.64 [Enlarge Picture] Air Cleaner Clamp - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 840, 850, 851, 860, 861, 871, 881, 8N, 900, 901, 941, 950, 951, 960, 961, 971, 981, 9N, NAA, NAB. (Part No: 311508) $12.90 [Enlarge Picture] Air Cleaner Clip - Clips are for air cleaner 8N9600B. Not exactly like original, works the same. (Part No: 9N9678) $5.50 Air Cleaner Clip - For Models: NAA, Jubilee, 600, 700, 800, 900. Not exactly like original, works the same. (Part No: 9N9678) $5.50 Air Cleaner Cover - For models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND.230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS DIESEL)445, (515 GAS DIESEL), 530A, 531, (532 GAS DIESEL), 545. (Part No: C5NE9661A) $59.40 [Enlarge Picture] Air Cleaner Cover Assembly, 3 Cylinder - For Models: 2600, 3600, 3900, 4100, 4600, 230A, 234, 333, 334, 340, 340A, 340B, 515, 530A, 531, 532, 540, 540A, 540B. (Part No: D8NN9643BA11Z) $85.89 Air Cleaner Cover Assembly, 4 Cylinder - For Models: 5600, 6600, 7600. (Part No: D8NN9661AA) $81.71 Air Cleaner Cup - Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B (Item 'D' in picture is available for $3.83 additional, order part number 9N9623B, if needed. (Part No: S.61648) $29.40 [Enlarge Picture] Air Cleaner Cup - For Models: NAA, Jubilee, 600, 700, 800, 900. 4 7 8 inch diameter. Replaces OEM # B5NN9658A. (Part No: S.60583) $28.96 Air Cleaner Cup Gasket - For air cleaners with thumb screw clamp (15-1 4" long). Tractors: 9N, 2N, 8N, (1939-1952). (Part No: 9N9623A) $3.83 [Enlarge Picture] Air Cleaner Cup Gasket - For air cleaners with toggle clamps on side of air cleaner (14-3 4long).Use with Air Cleaner Cup S.61648 and S.60583. For models 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 9N9623B) $3.83 [Enlarge Picture] Air Cleaner Cup Set - Includes air cleaner cup, inner cup, clamp. Cup ID is approx 4.5in., Cup Height is 3in. Replaces 311507. (Part No: 696300) $43.18 [Enlarge Picture] Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2in x 3-1 4in. (Part No: S.43231) $8.78 [Enlarge Picture] Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2in x 3-1 4in. (Part No: S.43231) $8.78 [Enlarge Picture] Air Cleaner Hose - For Models: Dexta, Super Dexta. (Part No: 957E18233) $28.12 [Enlarge Picture] Air Cleaner Hose Clamp - Clamp, air cleaner to carburetor pipe. Tractors: 9N, 2N, 8N, NAA (1939-1954). (Part No: 9N9653) $3.15 [Enlarge Picture] Air Cleaner Hose, Lower Outlet - A= 2.00", B= 2.187". For Models: 2000, 3000, 4000 all w diesel engines. (Part No: C5NN9B640B) $10.60 [Enlarge Picture] Air Cleaner Oil Cup - 4-3 8" I.D, 3" tall. For Models: 1801, 1811, 1821, 1841, 1871, 1887, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 311510) $24.48 [Enlarge Picture] Air Cleaner Oil Cup, Inner - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 311509) $14.39 [Enlarge Picture] Air Cleaner Screen - Air cleaner screen. For tractors: 8N (1948-1952). (Part No: 8N9669) $11.23 [Enlarge Picture] Air Cleaner Tube - For Models: 2N, 8N, 9N. Air Cleaner Tube, Air Cleaner to Carburetor. (Part No: 9N18215C) $16.89 [Enlarge Picture] Air Filter Element, Inner - OD top=2 1 8in, OD bottom=2 9 16in, ID top= 3 8in, ID bottom=1 7 8in, Ht = 10 5 16in. Inner filter fits GAS tractors: (2000, 3000, 4000 all 1 73>) 2600, 3600, 4600, 2610, 3610, 4610. Industrials: (2110LCG, 3400, 3550, 4110LCG, 4400, 4500 all 1 73>), 230A, 231, 335, 340A, 420, 445A, 515, 531, 532, 535, 545. DIESELS: (3400, 3500, 3550 all 1 73>), 335 (up to 5 76), 420, (515, 531, 532, all up to 5 76), 535, 550, 6500. Replaces D2NN9R500A515. (Part No: E6NN9R500DA) $36.07 [Enlarge Picture] Air Filter Element, Outer - OD = 4 1 2in, ID = 2 1 4in, Ht = 10 11 16in. Outer filter fits GAS tractors: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. Industrials: 2110LCG, 230A, 231, 3400, 3500, 3550, 335, 340A, 4110LCG, 4400, 4500, 420, 445A, 515, 531, 532, 535, 545. DIESELS: 3400, 3500, 3550, 335 (up to 6 76), 420, (515, 531, 532, all up to 5 76), 535. (Part No: E6NN9B618AA) $27.37 [Enlarge Picture] Air Filter, Inner - 13-3 8" x 3.00". For Models: 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 4110, 4130, 4610, 4630, (5600, 5700, 6600, 6700 from 4 1976 and up), 5610, 5900. (Part No: D6NN9R500B) $23.63 Air Filter, Inner - 9-15 16" tall x 3" diameter. For Models: (550, 555 from 1975 to 7 1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4 1976 and later). (Part No: D6NN9R500A) $22.38 [Enlarge Picture] Air Filter, Inner - OD top = 3.59", OD bottom = 4.33", ID top = .43", ID bottom = 3.00", height = 11.42". For Models: 7840, 8240, (8340 up to 9 1993 Non Turbo), 8160, 8260, 8360, 8560. (Part No: 82008601) $42.22 [Enlarge Picture] Air Filter, Inner - OD top = 5.68", ID top = 5.78", height = 17.50". For Models: TW25, TW30, TW35, 8730, 8830. (Part No: D8NN9R500AA) $36.15 [Enlarge Picture] Air Filter, Inner - OD 3-5 8", ID top 61 64", ID bottom 3-1 16", height 13-13 16". For Models: 7000, 7600, 7700, 6610, 6710, 7610, 7710, 7810, 7910, 8210, (3010S, 5610S, 6610S, 7610S, 7810S w steel air cleaner), (4630 w Turbo), 8530, TW5, TW10, (545, 545A, 545C, 545D, 555A, 555B 8 1981 and up), 555C, 555D, 575D, 655, 655A, 655B, 655C, 655D, 675D, 750, 755, 755A, 755B. (Part No: 81823932) $22.30 [Enlarge Picture] Air Filter, Outer - For Models: 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, (5600, 5700, 6600, 6700 from 4 1976 and up), 5610. (Part No: D6NN9601B) $27.71 Air Filter, Outer - For Models: (550, 555 from 1975 to 7 1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4 1976 and later). (Part No: D6NN9601A) $23.63 [Enlarge Picture] Air Filter, Outer - OD top = 8.62", OD bottom = 7.43", ID top = .43", ID bottom = 3.77", height = 13.05". For Models: 7840, 8240, (8340 up to 9 1993 Non Turbo), 8160, 8260, 8360, 8560. (Part No: 82008600) $54.74 [Enlarge Picture] Air Filter, Outer - OD top = 9.90", OD bottom = 9.12", ID top = 5.78", height = 18.50". For Models: TW25, TW30, TW35, 8730, 8830. (Part No: D8NN9B618AA) $113.20 [Enlarge Picture] Air Filter, Outer - OD top 7-3 8", ID top 1 2", OD bottom 6-5 8", ID bottom 3-3 4", height 15-1 2". For Models: 7000, 7600, 7700, 6610, 6710, 7610, 7710, 7810, 7910, 8210, (3010S, 5610S, 6610S, 7610S, 7810S w steel air cleaner), (4630 w Turbo), 8530, TW5, TW10, (545, 545A, 545C, 545D, 555A, 555B 8 1981 and up), 555C, 555D, 575D, 655, 655A, 655B, 655C, 655D, 675D, 750, 755, 755A, 755B. Replaces E9NN9601AA. (Part No: 81866927) $41.38 [Enlarge Picture] Air Funnel - For models NAA, Jubilee, 600, 700, 800, 900 (2000, 4000 ALL < 1964) (Part No: NAA9684A) $22.84 [Enlarge Picture] Air Funnel Assembly - Fits on model 8N. (Part No: 8N9684) $11.11 [Enlarge Picture] Air Hose to Carburetor - For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3 8 inches long, 1 1 2 inch inside diameter. (Part No: 9N9652) $1.83 [Enlarge Picture] Breather Cap - For dry-type air cleaners on gas tractorsFor 4000 less 4500 gas, 5000, all 1965-1975. 2 1 4" diameter Pre-Cleaner Assembly. (Part No: C5NN9A660A) $14.92 [Enlarge Picture] Breather Cap - For dry-type air cleaners on gas tractors (2000, 3000, 4000, all 1965-1975), (2600, 3600, 4600, 231, 335, 515, 531, 532, all 1975-1981). For oil bath cleaners on diesel tractors 2000, 3000 except 3500 and 3550, 4000 except 4500, all 1965-1975. For 2600, 3600, 231, 233, 333, all 1975 to 1981. Breather cap for 2" air intake pipe. Cap is 6 1 2" tall. (Part No: C5NN9A660B) $22.04 [Enlarge Picture] Cap Fuel, Diesel - Cap. For Models: 2000, 2600, 2810, 2910, 3000, 3600, 3900, 3910, 4000, 4100, 4110, 4600, 4610SU, 5000, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E7NN9030AA. (Part No: D5NN9030A) $8.48 [Enlarge Picture] Carb Gasket Set - For Models: 9N, 2N, 8N. (Part No: 9N9502) $2.50 [Enlarge Picture] Carb Gasket Set - For all Models 1953-1957, using Marvel Schebler carburetor. Used on the following Marvell carbs: TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 (Part No: EAF9502) $3.75 [Enlarge Picture] Carb Gasket Set - For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: EAE9502) $3.75 [Enlarge Picture] Carb Tune Up Kit - For Models: 2000, 3000, 4000 all w 3 cylinder gas engines and Zenith carb # E1NN9510BA. (Part No: K2183) $48.50 [Enlarge Picture] Carburetor Elbow & Strainer - For Models: 2N, 8N, 9N, NAA, NAB, Jubilee. (Part No: 9N9553) $5.64 [Enlarge Picture] Carburetor Float - For 800, 900, 4000. Carburetor Float with Marvel Schebler with 172 Engine large bowl measures 2 3 4 inches at widest point. Replaces OEM part number 311608. (Part No: R2383) $23.25 [Enlarge Picture] Carburetor Float, Large Bowl - Float, for large bowl (2 7 8 inches at widest point of outside edge of floats) carburetors. For Models: (801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000 all 1958-1964 with 172 CID gas engines) using Marvel-Schebler large-bowl carburetors. (Part No: 311608) $23.09 [Enlarge Picture] Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3 8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A) $18.33 [Enlarge Picture] Carburetor Kit, Basic - For Zenith 13876 carburetor on 2N, 9N, 8N. (Part No: BK44V) $28.26 [Enlarge Picture] Carburetor Kit, Basic - Basic carburetor repair kit. For Models: from 1955 to 1957, with 172 CID gas engine. Carburetor part #: Marvel-Schebler TSX580 (supersedes TSX593), Ford 312954. Kit contains: throttle shaft, Viton float valve, float lever pin, and gaskets for minor carbure For 2000, 501, 601, 701, 800, 900 (Part No: BK47AV) $20.65 [Enlarge Picture] Carburetor Kit, Basic - Carburetor Kit - Basic - For 801, 901, 4000 all with 172 CID and Marvel-Schebler TSX769 or TSX813. Basic Carburetor Rebuild Kit (Part No: BK47CV) $16.74 [Enlarge Picture] Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat. For Models: 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: BK47V) $19.50 [Enlarge Picture] Carburetor Kit, Basic - Kit for Marvel TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 carbs used on 2000 4 cyl., 2N, 4000 4 cyl., 600, 601, 605, 611, 612, 621, 630, 631, 640, 641, 644, 650, 651, 655A, 655C, 655D, 655E, 660, 661, 671, 675D, 675E, 681, 685, 700, 702, 724, 725, 730, 735, 740, 741, 743, 744, 745, 745S, 750, 755, 755A, 755B, 765, 766DT, 771, 775, 785, 800, 801, 811, 820, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 8N, 9N, NAA, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Part No: MS101) $22.00 [Enlarge Picture] Carburetor Kit, Basic - Kit for Zenith 13913, 13914, 13912 carbs used on 2000 3 cyl., 3000 3 cyl., 4000 3 cyl. (Part No: Z107) $36.00 [Enlarge Picture] Carburetor Kit, Basic - Kit for Marvel TSX662, TSX769, TSX813, TSX977 carbs used on 4000 4 cyl., 800, 801, 811, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Part No: MS102) $23.26 [Enlarge Picture] Carburetor Kit, Basic - Kit for Zenith 12902 carb used on 6000. (Part No: Z104) $28.00 [Enlarge Picture] Carburetor Kit, Basic - Kit for Zenith 12493 and 13879 carb used on NAA, Jubilee. (Part No: Z103) $26.36 [Enlarge Picture] Carburetor Kit, Basic - Kit for Holley R2923-1A, 2923-2, 3012-2, 3013-2, R3012-3A, R3013-4A, 3012, R3013-4F, 2923A, R3012-3, 12R31338, R3658A carbs on 2000 3 cyl., 3000 3 cyl., 4000 3 cyl., 5000. (Part No: H102) $28.00 [Enlarge Picture] Carburetor Kit, Basic - For TSX33, TSX241A, TSX241B and TSX241C carburetors on 2N, 8N and 9N tractors. Kit contains throttle shaft, float valve, float lever pin, and gaskets for minor carburetor overhaul. (Part No: BK45V) $15.03 [Enlarge Picture] Carburetor Kit, Comprehensive - For models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX33, Ford 9N9510A. Kit contains all parts necessary for major carburetor overhaul, including a Viton float valve. For 2N, 8N, 9N. Does NOT include float. (Part No: C545V) $37.50 [Enlarge Picture] Carburetor Kit, Comprehensive - For models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX241A, TSX241B, & TSX241C, Ford 8N9510C. Kit contains parts necessary for major carburetor overhaul, including a Viton float valve. For 2N, 8N, 9N. Does Not include Float. (Part No: C546V) $37.50 [Enlarge Picture] Carburetor Kit, Comprehensive - Complete carburetor repair kit. For models from 1958 to 1962, with 134 CID gas engine. Carburetor part #: Marvel-Schebler TSX765, Ford EAG9510G. Kit contains all parts necessary for major carburetor overhaul, including a Viton float valve. For 2000, 501, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, . Does not include float. (Part No: C547BV) $42.23 [Enlarge Picture] Carburetor Kit, Comprehensive - For models with 172 gas engine, 1958 to 1960 prior to s n 126524~ Carburetor part #: Marvel-Schebler TSX769, TSX813, Ford 312955. 1962 to 1964 after s n 126524~ Carburetor part #: Marvel-Schebler TSX813, Ford 312955, For: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. Does not include float. (Part No: C547CV) $37.00 [Enlarge Picture] Carburetor Kit, Comprehensive - Contains all parts necessary for major overhaul (less throttle shaft & float) For 4000, 4600, 4610. All using Holley R4111 or R8554 carburetor (Ford part # C7NN9510A or D8NN9510CA). (Part No: CKPN9590C) $63.84 [Enlarge Picture] Carburetor Kit, Comprehensive - For Models: NAA, Jubilee 1953-64 with 134 CID gas engine, 600 & 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit.Rebuilds OEM Carb #'s: EAE9510C, EAE9510D, B2NN9510A, B4NN9510A. (Part No: C547V) $39.99 [Enlarge Picture] Carburetor Kit, Comprehensive - For 800 & 900 1955-1957 with 172 CID gas engine, with a Marvel-Schebler TSX706 or TSX593. Does not include float. (Part No: C547AV) $37.00 [Enlarge Picture] Carburetor Overhaul Kit, Comprehensive - Complete Carburetor Repair Kit (less throttle shaft) For 2000, 2600, 2610, 3000, 3600, 3610. All using Holley R4119, R4120, R8552, or R8553 carburetors. (Ford # C7NN9510x (x= B, C, AA, BA)) (Part No: CKPN9590B) $64.71 [Enlarge Picture] Carburetor Shaft - Throttle shaft and lever. For Models: 600, 700, 800, 900, NAA, Jubilee. (Part No: 312951) $13.38 [Enlarge Picture] Carburetor Throttle Shaft & Lever - For Marvel Schebler carburetor on 2N, 8N, 9N. (Part No: 9N9581A) $4.81 [Enlarge Picture] Carburetor Venturi - Venturi for original Marvel Carburetors. For Models: 2N, 8N, 9N. (Part No: C5NN9586B) $7.91 [Enlarge Picture] Carburetor, New - Carburetor For NAA, Jubilee. Replaces TSX428, Zenith 13879 and Ford B2NN9510A. (Part No: EAE9510C) $285.90 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 601 series:(601, 611, 621, 631, 641, 651, 661, 671, 6810, 134ci gas engine. This new Zenith carb replaces Marvel-Schebler TSX765 and Ford 312954. Center to center on the 2 mounting bolts is 2 3 8 inches. Made in USA, 1 year warranty. (Part No: 13878) $194.18 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 600, 700, 800 & 900 series tractors using Marvel Schebler TSX692, TSX577, TSX551 or TSXU834 carburetors. Replaces the following OEM part numbers: EBD9510D, 310746, EBE9510D. Center to center on the 2 mounting bolts is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 12566) $223.00 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 800 series, 900 series tractors 1955-1957 with 172ci gas engine. This Zenith carb replaces Marvel-Schebler TSX706 (supersedes TSX593) and Ford EAF9510G. Center to center on the 2 mounting bolts is 2 3 8 inches. Made in USA, 1 year warranty. (Part No: 13877) $207.00 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 801 series & 901 series 1958-1960 PRIOR to serial number 126525 with 172ci gas engine. This Zenith carb replaces Marvel-Schebler TSX769, Ford 312955 and, B8NN9510B. Center-to-center distance on the mounting studs is 2-11 16in. Fuel inlet is 3 8 inches. Made in USA, 1 year warranty. (Part No: 13881) $259.75 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 801 & 901 AFTER serial number 126523, and Model 4000 1962-1964 with a 172ci engine. This Zenith carb replaces Marvel-Schebler TSX813 and Ford C0NN9510C. Center to center on the 2 mounting bolts is 2 3 4 inches. Fuel inlet is 7 16 inches. Made in USA, 1 year warranty. (Part No: 13875) $248.00 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 9N, 2N, 8N, 1939-1952. New Zenith carb replaces TSX33, TSX241B, TSX241A, TSX241C and OEM# 8N9510C. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 13876) $198.12 [Enlarge Picture] Carburetor, New - Black. Cast iron. Exactly like original. For 8N, 9N, 2N. (Part No: 8N9510C-Black) $148.95 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 2000 (3 cylinder 158 gas only) (Replaces Holly Part No: R3012, R3656 also replaces OEM Part No: C5NN9510L). Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 13915) $284.78 [Enlarge Picture] Carburetor, New - With reversible linkage, This Zenith carburetor outperforms the original carbs used on: 4000. New Zenith replacement carburetor. For 3 cylinder, 201 CID engines. Replaces OEM# C7NN9510A and C9NN9510C. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 13912) $305.00 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 2000, 2100. For 3 cylinder 158 CID engines. Replaces OEM# C9NN9510A, C7NN9510B, D8NN9510AA, D6NN9510A, and Holley P N R4119, R7867, R8552. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 13913) $295.45 [Enlarge Picture] Carburetor, New - This Zenith carburetor outperforms the original carbs used on: 2600, 3000, 3400, 3600. New replacement Zenith carburetor. For 3 cylinder 175 CID engine. Replaces OEM# C7NN9510C, C9NN9510B, D3NN9510B, D6NN9510B, D8NN9510BA, D3NN9510C, D8NN9510CA. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 13914) $305.00 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 4000. New replacement Zenith carburetor. For 3 cylinder 201 CID engine. Replaces OEM# C5NN9510N. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA, 1 year warranty. (Part No: 13917) $299.67 [Enlarge Picture] Carburetor, New - For 9N, 2N, 8N, ALL 1939-1952 - Original Marvel-Schebler design replaces TSX33, TSX341B, TSX431C. (Part No: 8N9510C) $133.08 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 13879) $174.23 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 600, 620, 630, 640, 650, 660, 700, 740, ALL that used 134 CID gas engine and TSX580 or EAE9510D carbs. Linkage uses ball end rods. Note: Mounting studs are 2 1 4 inches center to center. Made in USA, 1 year warranty. (Part No: 13880) $182.25 [Enlarge Picture] Carburetor, New - For 501, 601, 701 (1958 to 1962), 2000 (1962 to 1964) with 134 CID gas engine. Replaces Marvel-Schebler TSX765, Zenith 0-13878, Ford B8NN9510A. (Part No: 312954) $271.72 [Enlarge Picture] Carburetor, Rebuilt - Rebuilt carburetors are sometimes hard to keep in stock. We will try to fill your order whenever possible and as quickly as possible. Please allow up to one week for shipping of a rebuilt carb. If you have a good core, we can rebuild yours. Turn around time is about 1 week and you do not have the core charge. Call us for order information if you would like to send in your core. Rebuild cost does not include float. (Part No: CARBNOTE) $0.0 Carburetor, Rebuilt - Fits 3800 - replacement for OEM 34IVN. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1281-CARB) $260.10 Carburetor, Rebuilt - Fits NAA, Jubilee - replacement for OEM TSX 428. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1304-CARB) $147.39 Carburetor, Rebuilt - Fits 600, 700 - replacement for OEM TSX 580. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1306-CARB) $147.39 Carburetor, Rebuilt - Fits 501, 601, 701, 1958-1962, 2000 EARLY - replacement for OEM TSX765. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1308-CARB) $147.39 Carburetor, Rebuilt - Fits 800, 900 - replacement for OEM TSX593, TSX706. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1310-CARB) $147.39 [Enlarge Picture] Carburetor, Rebuilt - Fits 801, 901, 4000 EARLY - replacement for OEM TSX662, TSX813. Add $75.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1312-CARB) $147.39 Carburetor, Rebuilt - Fits 601, 701, 800, 900, 2000 EARLY, 4000 EAR - replacement for OEM TSX692. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1314-CARB) $147.39 Carburetor, Rebuilt - Fits 801, 901 - replacement for OEM TSX769. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1316-CARB) $147.39 Carburetor, Rebuilt - Fits 2000, 3000 series (3000, 3400 etc), 3 CYL. - replacement for OEM R4119, R4120, R8552, R8553, LIST6863. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1318-CARB) $164.73 Carburetor, Rebuilt - Fits 4000 , 1965-8 1968 - replacement for OEM R3657A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1319-CARB) $164.73 Carburetor, Rebuilt - Fits 2000, 3000, 4000 (W DIAPHRAM) - replacement for OEM 13912, 13913, 13914. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1320-CARB) $164.73 Carburetor, Rebuilt - Fits 4000 (1965-1975), 4600 (1975-1971), 4610 - replacement for OEM R4111-1A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1321-CARB) $164.73 Carburetor, Rebuilt - Fits 5000 - replacement for OEM R3658A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1322-CARB) $164.73 Carburetor, Rebuilt - Fits 5000 - replacement for OEM 13920. Add $50.00 core charge to price - this charge is refundable if you send your core to us. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1323-CARB) $164.73 Carburetor, Rebuilt - Fits 8N, 9N, 2N - replacement for OEM TSX33, TSX241B. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1302-CARB) $144.50 Choke Cable - 48.00" total length. For Models: 2000, 3000, 4000, 2600, 3600, 4600, 231, 2110LCG, 335, 3400, 3500, 420, 4110LCG, 4400, 4500, 515, 535. (Part No: C5NN9700C) $13.32 Choke Cable - Universal choke cable 72inches long, 7 16 inch thread dia. (Part No: CC72) $11.22 [Enlarge Picture] Choke Control Rod Assembly - Pre-bent Choke Control Rod is 29 1 2 inches long. Does NOT come with knob. For tractors: 9N, 2N, 8N (1939-1952). See part number 9N9815 for Throttle to Governor Rod. (Part No: 9N9700) $28.50 [Enlarge Picture] Choke Fly Assembly - Choke fly assy. 1-5\16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549) $10.23 [Enlarge Picture] Choke Knob - For tractors: 9N, 2N, 8N (Part No: 9N9703) $6.50 [Enlarge Picture] Choke LVR&SHFT - Choke lever & shaft. For Models: 2000, 601, 701. (Part No: EAE9546A) $8.42 Choke Lever & Shaft - For Models: 2N, 8N, 9N. (Part No: 9N9546) $6.65 [Enlarge Picture] Cyclone Cup and Spring Assy - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053) $22.56 [Enlarge Picture] Cyclone Air Cleaner Glass Jar - For 8N, 2N, 9N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056) $23.31 [Enlarge Picture] Cyclone Air Cleaner Rubber Seal - Rubber Seal, For CYCLONE Air cleaner only. Exact of original. Minimum order Qty is 2. (Part No: 230055) $6.16 [Enlarge Picture] DIESEL ADDITIVE 16 OZ - StarTron Diesel Engine Additive 16 oz. Treats 512 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD16) $22.38 [Enlarge Picture] DIESEL ADDITIVE 32 OZ - StarTron Diesel Engine Additive 32 oz. Treats 1, 024 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD32) $40.65 [Enlarge Picture] DIESEL ADDITIVE 8 OZ - StarTron Diesel Engine Additive 8 oz. Treats 256 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Part No: STD8) $17.33 [Enlarge Picture] Dry Air Cleaner Element - For Models: 2000, 3000, 4000, 5000, all diesel 1965 and up. For Models: 2600, 3600, 4600, all gas 1975 and up. Dry element for C5NN9600E dry air cleaner. (Part No: D0NN9B618B) $32.65 [Enlarge Picture] Dual Fuel Filter Head - For 3000 1965-12 1968, 5000 1965-9 1969. Head for dual fuel filter with Simms injection pump. (Part No: C5NE9165A) $27.26 [Enlarge Picture] EAF9549B Choke - Choke fly assy. 1-3 8" dia. For Models: 2000, 601, 701, 800, 900. (Part No: 312952) $26.04 [Enlarge Picture] FILTER, FUEL - Fuel water separator cartridge (PRIMARY). Tractors: 8160, 8260, 8360, 8560, M100, M115, M135, M135DT, M160, M160DT, M150. (Part No: 87840591) $26.90 FUEL FILTER - Fuel water separator cartridge (PRIMARY). Skidsteers: 963, 963G. (Part No: 6671649) $26.50 FUEL INJECTOR - 30 Series w 201 CID. For models: 4630, 4680, L885, 3910, 3930, 4130. **NO Core** *TT* (Part No: E9NN9F593CA) $59.90 [Enlarge Picture] FUEL INJECTOR - For 4630 Turbo``NO core charge. *TT* (Part No: E7NN9F593CA) $63.90 [Enlarge Picture] Fuel Bowl - Fuel bowl. For Models: 1801, 2000, 4000, 501, 601, 701, 801, 901. (Part No: 311276) $6.99 [Enlarge Picture] Fuel Cap - For Models: Major, Power Major, Super Major. (Part No: E1ADDN9030) $9.71 [Enlarge Picture] Fuel Cap - For 2000, 3000, 4000, 5000. Fuel Cap for under hood fuel tank. (Part No: C5NN9030B) $10.12 Fuel Cap - For 2N, 8N, 9N, 600, 800, NAA Fuel Cap. (Part No: D5NN9030A) $8.48 [Enlarge Picture] Fuel Cap, Zinc - Original style cap fits 9N, 2N, 8N. Made of Zinc. (Part No: 9N9030Z) $7.50 [Enlarge Picture] Fuel Filter - Spin-on fuel filter element w drain. For 5640, 6640, 7740, 8240, 8340, (Part No: F0NN9176BA) $23.10 [Enlarge Picture] Fuel Filter - Fuel sediment filter. For Models: TW10, TW20, TW30. (Part No: D8NN9176AA) $7.03 [Enlarge Picture] Fuel Filter - 4-3\8 high fuel filter. For Models: TW10, TW20, TW30. (Part No: CAV7111_796) $11.30 [Enlarge Picture] Fuel Filter - 2.717" tall. For Models: 1100, 1200. (Part No: SBA130366040) $14.58 Fuel Filter - Fuel sediment filter. For all 144 & 172 CID Diesel tractors 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 309991) $24.06 [Enlarge Picture] Fuel Filter , CAV type - For Models: (6500, 750, 7500, 650 all from 1973 and up), (2000, 3000, 4000, 5000, 7000 all from 1965 and up), (8000, 9000 both from 1968 and up). Replaces EDPN9N074AA. NOTE: verify you have CAV type filter before ordering. (Part No: S00296) $5.86 [Enlarge Picture] Fuel Filter - Pkg of 6 - Package of 6 filters. Filter height is 2 7 8in. Fits the following Diesel tractors 1965 & newer: 2000, 3000, 4000, 5000, 7000, 8000, 9000. INDUSTRIALS 1973 & newer: 650, 750, 7500 (Part No: EDPN9N074AA) $29.95 [Enlarge Picture] Fuel Filter Assembly - Sediment bowl has a 7 16 inch bolt hole. For Models: 801, 901, 4000 (1960 to 1964). (Part No: C0NN9155A) $23.35 [Enlarge Picture] Fuel Filter Assembly, Double - Fits most Ford Diesels 1965 & newer that use CAV type double filter assembly. Replaces C5NN9165C and D2NN9165C. (Part No: S.60426) $40.42 [Enlarge Picture] Fuel Filter Assy, Single - For Diesel tractors using CAV type injection system. (Part No: S.60425) $36.80 [Enlarge Picture] Fuel Filter Bowl - Bowl for sedimenter. For TW5 (Part No: D8NN9162BA) $7.95 [Enlarge Picture] Fuel Filter Bowl - Bowl for sedimenter. For 3230, 3430, 3930, 4130, 4630, 4830, 5030, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW10, TW15, TW20, TW25, TW30, TW35 (Part No: D8NN9162BA) $7.95 [Enlarge Picture] Fuel Filter Diesel - Fuel sediment filter. For Models: Dexta, Super Dexta, Major, Power Major, Super Major (thru 1964). (Part No: EPN99162A) $12.02 [Enlarge Picture] Fuel Filter Head and Primer - For models 5610, 6610S, 7610S, 7810S, 5640, 6640, 7740, 7840, 8240, 8340, TB80, TB85, TB90, TB100, TB110, TB120. (Part No: F1NN9A384AA) $114.26 [Enlarge Picture] Fuel Filter, In-Line, 1/4 inch - Inlet 1 4, outlet 1 4, OD 1-29 32, length 4-1 16. (Part No: 6511393) $6.50 [Enlarge Picture] Fuel Filter, In-Line, 3/8 inch - Inlet 3 8, outlet 3 8, OD 1-29 32, length 3-7 8. (Part No: BF836) $6.28 [Enlarge Picture] Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5 16, outlet 5 16, OD 2-1 8, length 3-21 32. (Part No: BF7736) $5.94 [Enlarge Picture] Fuel Filter, In-Line, 5\16 inch - Inlet 5 16, outlet 5 16, OD 1-29 32, length 4-5 32. (Part No: BF840) $5.58 [Enlarge Picture] Fuel Injector - For Models: 3600, 4100, 5600, 5700, 333, 420. (Part No: D4NN9F593A) $66.71 [Enlarge Picture] Fuel Injector - For Models: 230A, 2100, 2600, 2610, 2910, 234, 755A. (Part No: E4NN9F593AA) $62.68 Fuel Injector - For Models: 4110, 5610, 7810, 7910, 655, 655A, BSD333, BSD442. (Part No: 83948208) $82.75 Fuel Injector - For Models: 260C, 4600, 4610, 5900, (TW20, 5610 swiss made), (6600, 6700 europe made), 540, 540A, 545, 650, BSD333H. (Part No: D8NN9F593DB) $64.06 Fuel Injector - For Models: 250C, 334, 3610, 3910, 5600, 5700, 340A, 340B, 445A, 450, BSD332. (Part No: D9NN9F593BA) $62.68 Fuel Injector - New Fuel injector for models 5610(01 01 1981-07 31 1987), 7810, 7910, 455, 655, 655A (01 01 1985-07 13 1987) (Part No: E4NN9F593BA) $45.97 Fuel Injector - New Fuel injector for models 7610, 7710, TW25, TW25, 8730, 8830. (Part No: E6NN9F593AA) $45.97 Fuel Injector - For models 801 series, 901 series using Roosa Pumps. Additional $20 core charge will be added to your order. If ordering on-line, this additional fee will not post on your order confirmation. This is a special order item and non-returnable. (Part No: SDN5210603) $95.00 Fuel Injector Seal Kit - For (1) injector on: Post 1965 tractors with 3 cylinders (Part No: C5NE9F596A) $4.99 [Enlarge Picture] Fuel Line - For Models: 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 740, (2000 4-cyl), 2111, 2030, 2031, 2120, 2130, 2131 all 1955-1964 gas w 134 CID engine. (Part No: NCA9282B) $24.50 [Enlarge Picture] Fuel Line - For models 9N, 2N, 8N, (1939-1952).This fuel line is from sediment bowl to carburetor. Consists of: 1 4 inch steel tubing with two 1 4 inch inverted flair fittings installed. (Part No: 9N9282A) $23.96 [Enlarge Picture] Fuel Line Anti-Rattler - For 9N, 2N, 8N 1939-1952. Fuel Line Anti-Rattler between fuel line and tank. Restoration Quality. Sold only in multiples of 2, price is for 1. (Part No: 9N9121A) $10.50 [Enlarge Picture] Fuel Pump - For Models: (2000, 3000, 4000, 5000 1965 and up), 2100, 2110, 2120, 2150, 2300, 231, 2310, 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 335, 3400, 3600, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4600, 5000, 5100, 515, 5190, 5200, 531, 5340, 5500, 5550, 6600. All with gas engines. (Part No: F2NN9350AA) $36.52 [Enlarge Picture] Fuel Pump - For Models: 3010S, 3830, 4010S, 4030, 5635, 6635, 7635, 4230, 4430, 4835, 4330V. Replaces 4667509, 4673618. (Part No: 4757883) $27.90 [Enlarge Picture] Fuel Pump - For models(585->12 90w cab).(68, 885, 86->), (595, 695 W Cab), (995 90-> w cab), (4210, 3220, 3230, 4230, 4240 W Cab).Replaces 1202938C91. (Part No: 1202938C92) $39.42 [Enlarge Picture] Fuel Pump - Hand primer. For Models: 5900, 5610, 6610, 6710, 7610, 7710, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 250C, 260C, 345C, 345D, 445C, 445D, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D, 755B. (Part No: F1NN9A384BA) $46.49 [Enlarge Picture] Fuel Pump Repair Kit - For Models: Major, Power Major, Super Major. (Part No: 81708068) $16.50 [Enlarge Picture] Fuel Pump w/ Primer Lever - Fuel Pump for Dexta, Super Dexta. Comes with gasket. (Part No: 957E9350B) $39.79 [Enlarge Picture] Fuel Pump, New - Fuel pump assembly with gasket. For Models: 3010S, 3830, 4030, 4330V, 4835, 5635, 6635, 7635, TL70, TL80, TL90, TL100. Replaces 4709282, 4740717, 4747883, 4756678, 4757883, 7343155, 9961024. (Part No: 9931448) $43.47 Fuel Pump, New - Fuel pump assembly with gasket. For Models: 555E, 575E, 655E, 675E, 775. (Part No: 87800194) $37.23 Fuel Sediment (SHORT) Bowl Assy - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B w short bowl. (Part No: 2NAA9155B) $17.98 [Enlarge Picture] Fuel Sediment Bowl Bail assembly - For tractors 9N, 2N, 8N, NAA, Jubilee. (Part No: 2N9166) $1.92 [Enlarge Picture] Fuel Sediment Bowl GASKET - Gasket, sediment bowl. 2" O.D. Tractors: 9N, 2N, 8N (1939-1952), NAA, 600, 700, 800, 900 (1953-1957). (Part No: NAA9160A) $.99 [Enlarge Picture] Fuel Sediment Glass Bowl With Gasket - 2 in. Glass Bowl W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 2N, 9N, 8N, NAA, Jubilee. (Part No: 9N9162) $3.62 [Enlarge Picture] Fuel Sediment Screen and Gasket - Gasket & Screen Set (for 2"OD Sediment Bowl), Ford 9N, 2N, 8N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 2NAA916061) $1.99 [Enlarge Picture] Fuel Sender - Fuel Sender WGasket, Screw Held. For 3 Cylinders models 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, IND 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 3340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 531, 532, 535, 540A, 540B, 545, 545A, 545C, 545D. (Part No: 83943961) $48.64 [Enlarge Picture] Fuel Sender - For models 4230, 4430 Orchard. (Part No: 5140580) $67.27 [Enlarge Picture] Fuel Sending Unit - For Models: 5000, 5100, (5110, 5610, 5900, 6410, 6610, 6810, 7610, before 11 1983), 5600, 6600, 7000, 7100, 7600. (Part No: D8NN9A316JA) $39.82 Fuel Sending Unit - Gas or Diesel, 6 or 12 volt, 1958-1964. For Models: 801, 901, 4000. (Part No: 310940) $33.00 [Enlarge Picture] Fuel Sending Unit - For 14 gallon tanks on 134 CID engines of the following models after 1957: 1801, 2000 series, 4000 series, 501, 600, 601, 700, 701, 800, 801, 800, 901 (Part No: 310938) $34.35 [Enlarge Picture] Fuel Sending Unit - Fuel Sending Unit with 4 clylinder. For 5600, 6600, 7610, 5610S, 6610S, 7610S, 7810, 8010S, (Part No: E3NN9A316BA) $50.07 Fuel Sending Unit - Lock Ring Type for Models: (2000, 2600, 3000, 3600, 4000, 4100, 4600, 2610, 3610, 2910, 4110, 4610 all <11 1983). Fit Fuel Tank part number E2NN9002BA. Lock Ring also required, part number S.67241 at $6.00. (Part No: D8NN9A316KA) $38.95 [Enlarge Picture] Fuel Sending Unit - Gas tank sending unit with gasket (mfg. by Stewart Warner). For 134 & 172 CID engines. Will work for 6 or 12 volt. (1958-1964): 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: B9NN9275S) $73.52 [Enlarge Picture] Fuel Shut Off Assembly - With Primer. Fits Dexta, Super Dexta. (Part No: 957E9189C) $99.15 [Enlarge Picture] Fuel Shut Off Valve - With O-Ring, at fuel tank. Has 1 2in. female outlet. For 172 CID gas engine in tractors with s n 126525 & up, models 801, 901, 4000, (1960 to 1964) (Part No: C0NN9285A-WOR) $47.65 [Enlarge Picture] Fuel Shut Off Valve - Has 3 8in. female outlet. For Gas Powered Tractor Series: 500, 600, 601, 700, 701, 2000(1955-1964), 800, 801, 900(to serial # 126524 with 1 4" fuel line 1955-1960), Diesel Powered Tractors (500, 600, 700, 800, 900, 2000, 4000)series (1958-1964) (Part No: 311292WOR) $27.95 [Enlarge Picture] Fuel Shut-Off Cable - Sizes available are: 48in (3-cyl, 65>), 55 in. (4-cyl, 65>), 63in (6-cyl, 76>), and 82in universal. SPECIFY SIZE NEEDED IN 'COMMENTS' WHEN ORDERING. (Part No: SHUTOFFCABLE) $14.95 [Enlarge Picture] Fuel Shut-Off Cable - Cable is 48" long. For 3-cyl (1965>)tractors: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630. (Part No: S.67059) $14.95 [Enlarge Picture] Fuel Shut-Off Cable - Cable assembly, fuel shut-off, 63" long. For diesel tractors 2000, 3000, 4000, 5000, 7000, (1965 to 1975); 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 233, 333, 335, 515, (1975 to 1981); 4610, 5610, 6610, 7610, 7710, with quiet cab (1981 to 1991). (Part No: E5NN9C331EA) $10.28 [Enlarge Picture] Fuel Shutoff Solenoid - For Models: (3230 3 1990 to 9 1993), (3430, 3930, 4630 3 1990 and up), (4830 7 1990 to 5 1994), (5030 10 1992 and up), (5110 5 1984 to 10 1991), (555C, 655C 11 1988 to 8 1993), (555D, 655D, 675D 9 1993 and up), (5610, 6610 1981 to 1993), (5640, 6640, 7840, 8240, 8340 11 1991 and up), (6710 1981 to 9 1985), (6810, 7410, 4 1989 to 10 1991), (755B 1987 to 1 1993), (7610, 7710, 1981 to 10 1991), (L783 7 1988 and up), (L785 4 1983 and up), (L865, L885 10 1994 and up), (LX865, LX885 11 1994 and up). (Part No: E8NN9D278AA) $59.95 [Enlarge Picture] Fuel Stop Solenoid - For Models: 3830, 4030, 4230, 4430, 4835. (Part No: 8190393) $44.92 [Enlarge Picture] Fuel Tank - For Gasoline engines (not for Diesel)11 gallon, No opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. (fuel line must be modified) fits: NAA, Jubilee 1953-54; 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NAA600800G) $196.08 [Enlarge Picture] Fuel Tank - For 5000, 7000, 5600, 6600, 7600 (Part No: DONN9002B) $149.90 [Enlarge Picture] Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $28.95 [Enlarge Picture] Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $68.56 [Enlarge Picture] Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $22.14 [Enlarge Picture] Fuel Tank Valve Tap - Metal Fuel Tap with screen for Diesels: Major, Super Major, 2000 (1965 up), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000 (1965 up), 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5600, 5610, 5700, 5900, 6600, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30. INDUSTRIALS: 550, 555A, 555B, 655, 655A. (Part No: E2NN9N024AA) $9.95 [Enlarge Picture] Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $5.90 [Enlarge Picture] Fuel Tank, Diesel - For Diesel Models: 5000 w CAV injection pumps (1965-1975), 5600, 6600, 7600 (1975-1981), 5610, 6610, 7610. (Part No: D8NN9002HA) $133.76 [Enlarge Picture] Fuel Tank, Diesel - For Diesel Models: 2000, 2100 1965 and up, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3150, 3300, 3310, 333, 3600, 3610, 3900, 3910, 4100, 4110, (4140 1965-1974), (4510SU 1981-2 1990), 4600SU, (531 1975-1981);L FWD & L CAB. Fuel tank. (Part No: C5NN9002AC) $139.90 [Enlarge Picture] Fuel Tank, Diesel - For Diesel: 3500, 3550, 4000, 4400, 4500, (4600 and 4610 all purpose), (2810, 2910, 3910, 4110 with front wheel drive less cab), 340A 340B, 420, 445, 445A, 515, 535, 530A, 540A, 540B. ADD $5.00 too normal shipping cost, due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: E2NN9002BA) $137.28 [Enlarge Picture] Fuel Transfer Pump - 2-bolt - Mounts to injection pump. For Super Major (8-61 64), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Tranfer Pump. Used on 3, 4 and 6 cylinder diesel engines. Replaces D8NN9350AA. (Part No: D8NN9350AB) $36.90 [Enlarge Picture] GASOLINE ADDITIVE (quart) - Calcium Is One Of The Major Components Of CA-40. When Added To Fuel The Calcium Bonds To Hydrocarbon Within The Fuel Causing A More Effiecient Burn Of The Fuel. Increase Fuel Efficiency & Lubricity While Decreasing Harmful Emissions. Safe For Gasoline, Diesel, Bio Diesel & Ethanol Fuels (E-85) Gasoline Lubricity Increased By 191% Ultra Low Sulfur Diesel Lubricity Increased By 300% Mix Ratio: 1 Oz. CA-40 To 15 - 20 Gallons Of Fuel Container Size: Quart (Treats about 2000 gallons of fuel at a cost of about 30 cents per 15 gallons.) ***ALSO AVAILABLE BY THE CASE FOR $439.90 PER 12 QT CASE) (Part No: CA-40) $38.90 [Enlarge Picture] GASOLINE ADDITIVE 16 OZ - Star*Tron Gasoline Additive 16 oz. Treats 256 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG16) $19.54 [Enlarge Picture] GASOLINE ADDITIVE 16 OZ - Star*Tron Gasoline Additive 16 oz. Treats 256 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG16) $19.54 [Enlarge Picture] GASOLINE ADDITIVE 8 0Z - Star*Tron Gasoline Additive 8 oz. Treats 128 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG8) $11.98 [Enlarge Picture] GASOLINE ADDITIVE 8 0Z - Star*Tron Gasoline Additive 8 oz. Treats 128 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG8) $11.98 [Enlarge Picture] Gasoline Fuel Tank, Steel - Gasoline Fuel Tank (Steel) For 9N, 2N, 8N. (Part No: 9N9002) $136.95 [Enlarge Picture] Harco 1/2 Pint Jar - 1 2 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP2131) $3.15 [Enlarge Picture] Harco Air Cleaner - For 8N (1948-1952) Harco style side mount air cleaner assy with jar and clamp, mounts over air door hole in hood (side mount). (Part No: AC2H18N) $135.27 [Enlarge Picture] Harco Pint Jar - 1 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP1237) $6.67 [Enlarge Picture] Harco Spring and Bail Assembly for 1 Pint Jar - 1 pint jar spring and bail assembly for Harco air cleaner (side mount) on 8N. (Jar NOT included). (Part No: ACP2134) $22.82 [Enlarge Picture] Harco Spring and Bail Assy For 1/2 Pint Jar - Fits Harco 1 2 pint jar. Spring and bail assembly for Harco air cleaner (side mount)on 8N. (Jar NOT included). (Part No: ACP2133) $21.98 [Enlarge Picture] INJECTION PUMP - FORD Models 4000, 4500, 4600, 4610 , 555B. Also replaces D6NN9A543GR. (Part No: D6NN9A543G) $679.90 [Enlarge Picture] Injection Line Set - Used with rotary injection pump. For Models: (BSD332, BSD333, BSD333H all from 1-1-1981 to 11-30-1988), (420, 535, 231 all from 1-1-1975 and newer), 445, 445A, (455 from 7-1-1987 to 11-30-1988), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, (230A, 2310 1-1-1981 to 2-28-1990). (Part No: FPL500) $35.71 [Enlarge Picture] Injection Line Set, 3 Cylinder - Includes C5NE9A555D, C5NE9A556D, C5NE9A557E. For Models: 2000, 3000, 4000 all 3 cylinder built after 1-1-1965 with CAV pump. (Part No: FPL100) $44.63 [Enlarge Picture] Injection Line Set, 3 Cylinder - Includes C7NN9A556G, C5NE9A556D, C5NE9A557E. For Models: (3000 from 1-1-1971 to 9-30-1975 w inline injection pump), (4000 from 4-1-1968 and up w CAV injection pump). (Part No: FPL101) $35.84 Injection Line, Cylinder 1 - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500734. (Part No: C0NN9A555E) $20.85 Injection Line, Cylinder 2 - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500736. (Part No: C0NJN9A556E) $16.45 Injection Line, Cylinder 2 - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500738. (Part No: C0NN9A556E) $20.85 Injection Line, Cylinder 3 - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500738. (Part No: C0NN9A557E) $20.85 Injection Line, Cylinder 4 - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500740. (Part No: C0NN9A558E_) $20.85 Injector - New Diesel fuel injector. For Models: 4000, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4500, 5000, 6000. Replaces D1NN9F593A, C7NN9F593BB. (Part No: C5NE9F593C) $45.97 [Enlarge Picture] Injector - NEW Fuel Injector. For 7000, 7500, A66. (Part No: C9NN9F593B) $47.97 [Enlarge Picture] Injector - Diesel fuel injector. For 750, 7600, 7700, A62, (Part No: D4NN9F593CR-EX) $43.95 Injector - Diesel fuel injector. For 401-TCID, 401-TICID, 9000, 9600, 9700, A66, TW20, TW30, (Part No: D8NN9F593BAR-EX) $48.95 Injector - NewInjector. For 755, 7600, 7700, A62, (Part No: D9NN9F593CA) $45.97 Injector - New fuel Injector. For 6600, 6610, 6700, 6710, 8000, 8210, TW10, TW5. (Part No: D9NN9F593DA) $45.97 Injector Nozzle - Fuel nozzle. For Models: 2000, 4000, 501, 601, 701, 801, 901. (Part No: D0NN9E527A) $35.20 Injector Nozzle - For Models: 750, 7600, 7700, A62. (Part No: D4NN9E527C) $35.15 Injector Nozzle - For Models: (6600, 6700 built 10 1980 and after), (6610 up to 7 1987), 6710, 8000, 8210, 8530, 8600, 8630, 8700, TW5, TW10, TW15, (444 up to 7 1987 w BSD engine). (Part No: D9NN9E527CA) $44.74 Injector Nozzle - For Models: 230A, 234, 2610, 2910, (329 up to 9 1989). (Part No: E1NN9E527AA) $44.55 Injector Nozzle - For Models: (250C up to 3 1990), 334, 340B, 450, 540, 3610, 3910, (5600 from 10 1980 and up), (6610 5 1987 to 7 1987), (332 up to 9 1989), (442 up to 8 1987). (Part No: D9NN9E527BA) $47.20 Injector Nozzle - For Models: 231, 233, 2810, 2310, 2600. (Part No: D4NN9E527E) $52.08 Injector Nozzle - For Models: 333, 335, 340, 340A, 445, 445A, 3600, 3900, 4100, 420, (5600 up to 9 1980). (Part No: D4NN9E527A) $44.73 Injector Nozzle - For Models: 532, 535, 540, 540A, 540B, 545, 545A. (Part No: D4NN9E527B) $41.76 Injector Nozzle - For Model: 5900 5 1987 and up. (Part No: C7NN9E527B) $29.74 Injector Nozzle - For Models: (755A, 755B, 7610, 7710, 444T up to 7 1987), (7600, 7700 10 1980 and up), 8730, 8830, TW25, TW35, (666T, 666T1 5 1987 and up). (Part No: D9NN9E527AA) $48.10 Injector Nozzle - For Models: (755B, 5610, 6610, 655, 655A all 8 1987 and up). (Part No: E7NN9E527BA) $67.09 Injector Nozzle - For Models: 3010S, 3830, 4835. (Part No: 99474914) $39.37 Injector Nozzle - For Models: 4110, (5610 up to 5 1987), 7810, 7910, (655, 655A up to 7 1987). (Part No: E1NN9E527BA) $55.03 Injector Nozzle - For Models: 4330, 5635. (Part No: 99474915) $39.37 Injector Nozzle - For Models: 4830, 5030, (6610 4 1987 and up), 555C, 555D, 575D, 655C, 655D, 675D. (Part No: E8NN9E527BA) $69.54 Injector Nozzle Tip - Nozzle tip, for fuel injector 960E993157AR-EX. For 144 CID, 3.5 bore, 3-cylinder engine, 1957 to 4-1962. Nozzle marking: NH-153-A, DDL110S916, DBL11036133. Nozzle orifice size:.013. For 152 CID, 3.6 bore, 3-cylinder engine, 4-1962 & up. Nozzle marking: N For DEXTA, (Part No: 1851744M1) $39.90 [Enlarge Picture] Injector Pump Drive - For Models: Major, Power Major, Super Major. Replaces, E1ADDN993184, E1ADDN993188, E238CL9. For late models with Roosa Pump. (Part No: E1ADDN993187) $67.34 [Enlarge Picture] Injector Pump Drive Pad - Fits: Major, Power Major, Super Major. (Part No: E1ADDN993184) $35.40 [Enlarge Picture] Injector Pump Governor Diaphragm - For Models: Dexta, Super Dexta up to 4 1962. (Part No: E354CL9) $46.04 [Enlarge Picture] Injector Pump Governor Diaphragm - For Models: Major, Power Major, Super Major up to 4 1962. (Part No: E1ADDN993115B) $28.75 [Enlarge Picture] Injector Pump Repair Kit - Fits: CAV 3, 4, 6 cylinder rotary pumps only. Replaces OEM # CAV7135-110. (Part No: CAV7135-110) $39.30 [Enlarge Picture] Injector Seal - Seal, fuel injection adaptor. For 4000, 601, 701, 801, 901. **Minimum order qty is 4** Price is each. (Part No: 312070) $16.90 [Enlarge Picture] LOCK RING, FUEL SENDER - For various fuel tanks (such as E2NN9002BA) that use a lock ring to secure the fuel sender (like the D8NN9A316KA). For some 2000, 2600, 3000, 3600, 4000, 4100, 4600, 2610, 3610, 2910, 4110, 4610 all <11\1983). Replaces C5NN9N283A. (Part No: S.67241) $6.00 Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $9.75 [Enlarge Picture] Main Adjustable Needle - Main adjusting needle. For Models: 2N, 8N, 9N. (Part No: 9N9565C) $5.41 [Enlarge Picture] Main Adjustable Needle - Main adjusting needle. For Models: 501, 600, 700, 800, 900, NAA. (Part No: EAE9565A) $8.18 [Enlarge Picture] Main Nozzle - For Models: 800, 900. (Part No: 312949) $16.24 [Enlarge Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. Tractors: 9N, 2N, 8N, (1939 to 1952. (501, 601, 701, 600, 700, NAA, Jubilee 4-cyl 134 CID gas engines 1953 to 1957), (2000 1962-1964). (Part No: C3NN9564A) $3.42 [Enlarge Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. For Models: (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000 all with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A) $6.04 [Enlarge Picture] Nozzle - Main nozzle. For Models: 2N, 8N, 9N. For Marvel-Schebler TSX241A, TSX241B, & TSX241C, TSX33, Ford 8N9510C, Ford 9N9510A. (Part No: 9N9530) $6.37 [Enlarge Picture] Oil Bath Air Cleaner - For 4600, 5600, 6600, 5900 1975 to 6 76, 5900 after 1985, 531. 7 3 4" Diameter, 2 1 2" Inlet. (S.66709) (Part No: D3NN9600F) $62.18 Pre Cleaner Assembly - For Models: 8630, 9030E, 9030V, 9700, TW15, TW20. Inlet opening 4.5" diameter, bowl is 10" in diameter. Nylon base w steel top cap. Uses 1109-9501 center bowl. Does not include clamp. Also replaces 86011276, (Part No: 83904364) $29.95 [Enlarge Picture] Pre-Cleaner Assembly - For Models: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 3910H, 4000, 4110, 4600, 4610, 4610H, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 5900, 6600, 6700, 6810. Pre-Cleaner Assembly. 6.89" Bowl Dia., 2.362" Inlet Dia, 3.937" Body Height. (Part No: 81823388) $31.16 [Enlarge Picture] Pre-Cleaner Assembly - For Models: 7000 10 1971-1974, 7600 and 7700 1975-1981, (2310, 2610, 2810, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A, all 1981-2 1990), (5610, 6610, 6710, 7610, 7710, all 1981-1991), (7810, 7910, 8210, 8530, TW5, all 1982-10 1991). Pre-Cleaner Assembly, dry for 3" pipe. (Part No: C9NN9A660C) $40.03 Pre-Cleaner Bowl - Pre-cleaner bowl of clear plastic with 10 1 2 inch outside diameter. For Models: 7000, 8000, TW10. (Part No: C9NN9A663A) $16.78 Quad Throttle Plate - For 8N. Quad Throttle Plate. (Part No: 8N9889A) $8.50 [Enlarge Picture] Quadrant Throttle Plate - For Models: 2N, 9N 1939-1947. (Part No: 9N9820) $29.50 [Enlarge Picture] SEDIMENT BOWL ASSEMBLY - Fuel filter assembly, gasoline, sediment bowl type has a 3 8 inch bolt hole. For 134 CID engines. Tractors 501, 601, 701, 2000, (1958 to 1964) For 172 CID engine to S N 126524 in tractors 801, 901, 1801, (1958 to 1960) (Part No: 311272) $24.95 [Enlarge Picture] Screen - Air cleaner funnel screen. For tractors: NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964)TIS (Part No: NAA9669A) $11.78 [Enlarge Picture] Screw Kit 4 Per PKG - Screw kit, air cleaner funnel to hood, set of 4 screws & speed nuts. For tractors: 8N {1948-1952}. (Part No: 32940-KIT) $8.28 [Enlarge Picture] Sediment Bowl Assembly - For Models: 2000, 600, 700, 800, all with 4 cylinder small carburetor. Sediment bulb assembly with 3 8 inch mounting hole. Replaces OEM NCA9155D. (Part No: 311272) $24.95 [Enlarge Picture] Sediment Glass Bowl - For Fordson Major, Power Major 52-8 61. (Part No: E1ADKN9355) $9.77 [Enlarge Picture] Sediment Glass Bowl gasket - For models For Fordson Major, Power Major 52-8\61. (Part No: E1AKN9354) $2.10 [Enlarge Picture] Throttle Control Lever Assembly - For Model: 8N. (Part No: 8N9805) $43.22 [Enlarge Picture] Throttle Control Rod - 4-1 2" overall length, includes one spring steel clip at each end of the rod. For Models: NAA, NAB, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: NAA9815F) $22.87 [Enlarge Picture] Throttle Control Rod Spring - For Models: 9N, 2N. (Part No: 2N9806) $7.64 [Enlarge Picture] Throttle Control Rod Spring - For Model: 8N 1948-1952. (Part No: 8N9806) $3.38 [Enlarge Picture] Throttle Rod - Rod, throttle control rod and socket. 2-1 2" long. Tractors: 9N, 2N (1939-1947). (Part No: 9N9810) $12.66 [Enlarge Picture] Throttle Rod - Rod, governor to carburetor control rod assembly, 7 inches long, ball recepticle on both ends. For tractors: 9N, 2N, 8N (1939-1952). (Part No: 9N9818A) $21.04 [Enlarge Picture] Throttle Rod - Rod, throttle to governor control rod assembly.Rod is approx 23in. long and has adjustable length. Spring loaded 'bullet' type ends for coupling to linkage. For tractors: 8N (1948-1952) (Part No: 8N9815) $27.28 [Enlarge Picture] Throttle Rod - Rod, throttle shaft to governor rod assembly is 10 5 8 inches long. For tractors: 9N, 2N (1939-1947) See part number 9N9700 for Choke Control Rod Assembly. (Part No: 9N9815) $25.30 [Enlarge Picture] Throttle Rod Grommet - For Models: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000 4 cyl), (4000 4 cyl). (Part No: 353873S) $4.00 [Enlarge Picture] throttle control rod - 4-1 2" overall length, includes one spring steel clip at each end of the rod. For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2111, 2120, 2030, 2130, 4000, 4030, 4040, 4121, 4130, 4140 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: NAA9815F) $22.87 [Enlarge Picture]   Gaskets Gasket Material, Cork Rubber - 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.95 [Enlarge Picture] Gasket Material, Cork Rubber - 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $8.95 [Enlarge Picture] Gasket Material, Exhaust Manifold - 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $19.95 [Enlarge Picture] Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $14.90 [Enlarge Picture] Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.90 [Enlarge Picture]   Gauges Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A) $12.44 [Enlarge Picture] Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A) $12.44 [Enlarge Picture] Ammeter Black Ring - For all models to 1958. Terminal type Ammeter. 30 - 30. Black Ring. Replaces FAD10850A. (Part No: A0NN10670A-BLAC) $10.38 [Enlarge Picture] Cable Drive - Cable assembly, tachometer drive, 48" long. For models without a cab, 25600, 3600, 4600 from 1975-1981. for 2610, 3610, 4110 and 4610 from 1981 and up. (Part No: D3NN17365C) $14.14 [Enlarge Picture] Cable Drive - Cable assembly, tachometer drive, 47 long. For Models: 5600, 5610, 6600, 6610, 7600, 7610. (Part No: D3NN17365F) $14.14 Cable Drive - Cable assembly, tachometer drive, 48 long. For Models without cab: 2000, 4000 both gas 1965-1975. 3000 gas & diesel 1965-1967. 5000 1965-1975. For models with cab: 2600, 3600, 4100, 4600, 5600, 6600 and 7600 from 1975-1981. 2610, 3610, 4110 and 4610 from 1981 and later. (Part No: D9NN17365AB) $13.00 [Enlarge Picture] Fuel Gauge - For Models: 601, 701, 801, 901, 2000, 4000, all 1958-1964. Fuel Gauge 6 VOLT. (Part No: 310948) $29.95 [Enlarge Picture] Fuel Gauge - For Models: 601, 701, 801, 901, 2000, 4000, all 1958-1964. Fuel Gauge 12 VOLT. (Part No: 310949) $29.95 [Enlarge Picture] Gauge & Instrument Kit, 12 Volt - For 4 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67645) $126.06 Gauge & Instrument Kit, 12 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67647) $126.06 Gauge & Instrument Kit, 12 Volt - For select-o-speed transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67649) $126.06 Gauge & Instrument Kit, 12 Volt - For 4 speed transmissions. transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67651) $126.06 Gauge & Instrument Kit, 12 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67653) $128.92 [Enlarge Picture] Gauge & Instrument Kit, 12 Volt - For select-o-speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67655) $126.06 [Enlarge Picture] Gauge & Instrument Kit, 6 Volt - For 4 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67644) $126.06 [Enlarge Picture] Gauge & Instrument Kit, 6 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67646) $126.06 [Enlarge Picture] Gauge & Instrument Kit, 6 Volt - For select-o-speed transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, (2000 1958-1964). (Part No: S.67648) $126.06 Gauge & Instrument Kit, 6 Volt - For 4 speed transmissions. transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67650) $126.06 [Enlarge Picture] Gauge & Instrument Kit, 6 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67652) $126.06 [Enlarge Picture] Gauge & Instrument Kit, 6 Volt - For select-o-speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67654) $128.91 [Enlarge Picture] Gauge Cluster, Temerature, Oil, Generator - For Models: Power Major, Super Major 8-1958 and up. (Part No: E1ADDN10849) $75.24 [Enlarge Picture] Gauge Kit, 8N - 8N Gauge Kit - (For 8N after s\n 263844) Consists of Proofmeter, 50 lb. Oil Gauge, and 30-30 Ammeter. (Part No: 8NGAUGEKIT) $53.90 [Enlarge Picture] Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1 4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $39.64 [Enlarge Picture] Hourmeter, Analog - 2", black, 12-24 volt. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $43.74 [Enlarge Picture] Instrument Cluster - Complete Instrument Cluster For 2000, 3000, 4000, 5000, 7000 (1965 to 1975). Does not come with mounting seal. (Part No: EHPN10849A) $159.90 [Enlarge Picture] Instrument Cluster - Speedometer moves counter clockwise. Metal casting. For Models: 2600, 3600, 4100, 4600, 5600, 6600, 7600(1975 to 1981) also fits 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, (1981 to 1990), 5610, 5900, 6610, 7610, (1981 to 9-1985), 230A, 234, 334, 335, 530A (1981 to 2-1990). Includes instrument stabilizer. (Part No: E5NN10849BA) $149.90 [Enlarge Picture] Instrument Cluster Assembly - For Models: 3830 Orchard, 4330 Vineyard, 4430 Orchard, (5530, 7530 Mudder). Replaces 5133783. (Part No: 5125046) $263.27 Instrument Panel Light Assembly - 6 Volt Light Assembly. For Models: 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 8NN14662A) $27.03 [Enlarge Picture] Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_4SP) $88.61 [Enlarge Picture] Instrument and Gauge Kit 5 Speed - For NAA, Jubilee, 600, 700 with 5 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_5SP) $88.61 Lens, Instrument Cluster, Plastic - Fits: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, ``445C, 445D, 450, 455, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5900, 655, 655A, 6600, ``6610, 6610S, 7600, 7610, 7610S, 7810, 8010. (Part No: 83918700) $28.95 [Enlarge Picture] Oil Pressure Gauge - For Models: 2N, 8N, 9N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. Replaces OEM#'s Ford:``FAD9273A and Massey Ferguson:506902M92. (Part No: S.61171) $11.28 [Enlarge Picture] Oil Pressure Gauge Kit, Universal - Complete assembly w oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002) $15.95 [Enlarge Picture] Oil Pressure Gauge, 50lb - For Models: 2N, 8N, 9N. Oil Pressure Gauge, 50 lbs., 2" Body Diameter. (Part No: 9N9273A) $8.39 [Enlarge Picture] Oil Pressure Gauge, 50lb Black - For Models: 2N, 8N, 9N. Oil Pressure Gauge, 0-50 lbs., for 2 inch Diameter hole. (Part No: 9N9273A-BLACK) $8.39 [Enlarge Picture] Oil Pressure Gauge, 80 lb - For the following tractors (before 1965): 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, NAA, Jubilee. Oil Pressure Gauge, 80 lbs., 2" Body Diameter. (Part No: FAD9273A) $15.52 [Enlarge Picture] Oil Pressure Gauge, 80LB, Black - For Models: 2N, 8N, 9N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 LB, dash or bracket mounted gauge with a bracket and studs 1 8" NPT thread. Repalces FAD9273A. (Part No: FAD9273A_Black) $16.95 [Enlarge Picture] PROOF METER CABLE (STEEL) - Ford Steel Jacketed Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B_STEE) $20.50 Proofmeter - Proofmeter for 8N (1950 to 1952) Proofmeter assembly, MPH. (Part No: 8N17360A1) $29.70 [Enlarge Picture] Proofmeter - For Models: Major, Power Major, Super Major 8 58 and up. (Part No: E1ADDN17360A) $53.87 [Enlarge Picture] Proofmeter - Proofmeter - For Model: Dexta 8 1960 and newer, Super Dexta diesel only. Use cable p\n 957E17365C. (Part No: 957E17360D) $54.90 Proofmeter Cable - 47-1 2" long. For Models: Dexta, Super Dexta. (Part No: 957E17365C) $27.15 [Enlarge Picture] Proofmeter Cable - 44" long. For Models: 6700, 7700, (5610, 6610, 6810, 7610 w Q cab), 7710. (Part No: D5NN17365D) $26.07 Proofmeter Cable - 50" long. For Models: 3230, 3430, 3930, 4130, 4630, 4830, 5030. (Part No: E9NN17365AA) $29.53 Proofmeter Cable - 56-3 4" long. For Models: (7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35 all less cab). (Part No: E8NN17365AA) $29.53 Proofmeter Cable - 57" long. For Models: (5200, 7200 Row Crop), 455, 550, 555A, 555B, 650, 655, 655A, 6500. (Part No: D4NN17365B) $27.60 Proofmeter Cable - 60" long. For Models: (7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35 all w cab). (Part No: E1NN17365AA) $31.42 Proofmeter Cable - 49" long, ends are 13 16" ID and 5 8" ID. For Models: Major, Super Major diesels less exhauster from 4 1962 and up. Replaces 1970910C1. (Part No: E1ADDN17365C) $15.91 Proofmeter Cable - Same size ends at 5 8". For Models: (Major gas or diesel), Power Major, (Super Major with exhauster). (Part No: E1ADDN17365A) $23.97 [Enlarge Picture] Proofmeter Cable - Fits 8N with side mount distributor (1950-1952) 34 Inches Long. (Part No: 8N17365) $12.11 [Enlarge Picture] Proofmeter Cable - Steel - For 8N 1950 to 1952. Proofmeter Cable is Exactly Like Original, Metal Case, 33 inches long. (Part No: 8N17365B-STEEL) $30.00 [Enlarge Picture] Proofmeter, Select-O-Speed - For Models: 2000, 4000, 601, 701, 801, 901 with Select-O-Speed. (Part No: C3NN17360J) $39.82 [Enlarge Picture] SCREW KIT - SCREW KIT 3 PER PKG.Screw kit, throttle plate to instrument panel, set of 3. Tractors: 8N (1948-1952). (Part No: 28319-KIT) $1.60 Shaft & Cable - Shaft & cable assembly, adapter to tachometer cable, 4-1\4" long. For 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 5600, 5610, 5700, 5910, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 (Part No: F1NN17N275AA) $8.34 [Enlarge Picture] Tach Drive - Generator Tach Drive Assembly For all C7NN10000C generators on 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Part No: C5NF17B282B) $30.42 [Enlarge Picture] Tach Drive - Tachometer drive assembly used on a Tisco (now obsolete) alternator conversion kit part #6X10300ALTH. For 2000, 3000, 4000, 5000, 6000, 7000, (Part No: 6X10299TD) $67.08 [Enlarge Picture] Tach Drive Gear - For Models: 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Part No: C5NF17373B) $13.83 [Enlarge Picture] Tachometer (Proofmeter) - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 - all with 4-cylinder engines and 4-speed transmissions (1953-1964) (Part No: C3NN17360N) $39.83 [Enlarge Picture] Tachometer (Proofmeter) - For Models: 600, 700, 800, 900, 2000, 4000 - all with 4-cylinder engine and 5-speed transmissions (1955-1964). (Part No: C3NN17360K) $43.42 [Enlarge Picture] Tachometer Cable - Cable assembly, tachometer drive, 39" long. For 2000 and 4000 diesel, 1965-1975. For 3000 gas and diesel 3 1967-1975. (Part No: C7NN17365A) $19.56 [Enlarge Picture] Tachometer Cable - Ford Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B) $17.96 [Enlarge Picture] Tachometer Cluster - For Models: (230A, 2310, 234, 2610, 2810, 2910, 334, 335, 3610, 3910, 4110, 4610, 4610N all built from 1981 to 2 1990), 340, 340A, 340B, 445, 445A, 450, 455. (Part No: 83953544) $186.88 [Enlarge Picture] Temp Gauge, Illuminated - For Models: Dexta, Super Dexta. Includes sender unit. (Part No: 957E10883) $43.42 [Enlarge Picture] Temperature Gauge - Chrome Rim - For Models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2 inch Face Diameter, 34 inch Capillary Tube Length. Replaces FAD10883A, and C3NN18287A.. (Part No: C3NN18287A-Chro) $22.22 [Enlarge Picture] Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2" Diameter, 34" Capillary Tube Length. Replaces FAD10883A. (Part No: C3NN18287A-Blac) $22.22 [Enlarge Picture] Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8V to 16V range, lighted dial, fits 2" diameter hole. For tractors that use 12V electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT) $17.76 [Enlarge Picture] Water Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85 [Enlarge Picture]   Hitch / Drawbar Adapt Plate Kit - Adapter plate kit, tractors without draft control on 3-pt. hitch. Kit contains adapter, o-ring seals, metric hardware, and mounting instructions. This is a 2-port adapter. All ports are 9 16-18 ORB thread. (Part No: HV4950) $51.86 [Enlarge Picture] Adjustable Arm-DSL - Adjusting arm, diesel models. For Models: 2000, 3000, 4000, 5000, 6000, 7000. (Part No: 6X10304) $32.56 Bracket Left Hand - Bracket, left hand stabilizer. For Models: 2910, 3910, 4110, 4610. (Part No: C7NND932B) $49.32 [Enlarge Picture] Bracket Right Hand - Bracket, right hand stabilizer. For 2910, 3910, 4110, 4610, (Part No: F-RH) $36.67 Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $15.26 [Enlarge Picture] Chain - CHAIN, Fixed drawbar safety chain assy, EXACT OF ORIGINAL. FOR tractors: 9N, 2N, 8N, Jubilee, NAA (1939-1954). (Part No: 9N5370) $66.84 [Enlarge Picture] Crank Arm, Leveling Box - For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E) $14.95 [Enlarge Picture] Drawbar - Swinging drawbar 37-1 2" O.L. For 5000, 7000. (Part No: C5NN805A) $133.56 Drawbar - Swinging drawbar, 32-7 8" O.L. with 1-1 2" offset. For 2000, 230A, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 530A, 5600, 6600, 7600, 7700, (Part No: C5NN805C) $110.90 [Enlarge Picture] Drawbar - Swinging drawbar, 32-3 8" O.L. 540 rpm PTO. For 2100, 2810, 2910, 3100, 3230, 3430, 3900, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 515, 532. (Part No: C5NN805J) $126.22 [Enlarge Picture] Drawbar - For Models: 7310, 7910, 8000, 8210, 8530, 8630, 8700, 8830, 9000, 8700, TW10, TW20, TW5. Drawbar is straight, 42.5 inches in length, 3 inches wide and 1.375 inches thick. Two 1.141 dia. front holes at 1.125 and 3.25 inches from front. Add additional $10 shipping due to 47.5 lbs weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D3NN805A) $245.11 Drawbar - 36.90" long. For Models: 5000, 7000, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, (7710 w 2 spd PTO), TW15, TW25, TW35. (Part No: E0NN805AC) $103.95 Drawbar - For 2000, 3000. Drawbar. 28" Long, 1.25" Thick, 2" Wide, 25.5" Holes center-to-center. (Part No: VPL4434) $66.98 [Enlarge Picture] Drawbar - Drawbar And Hanger Assembly For 800 Series (except 820, 821 (Part No: SDA8) $119.90 Drawbar - Swinging - For 1700, 1900, 1910, 2110, all late models. Swinging Drawbar is 2.93 inches wide, 1 inch thick and 32.06 inches long. (Part No: SBA370700031) $97.62 Drawbar Check Chain Kit - Consists of 1 pair anchors, 2 eyelets, 2 chains, 4 clevises with pins and hardware for the following tractors: 9N, 2N, 8N (1939-52), NAA (1953-54), Jubilee, 600, 700, 800, 900 Series (1955-57), Dexta, Super Dexta (1958-64), 2000, 4000 (1962-64), 2000, 3000, 4000 (1965-75), 2600, 3600, 4600 (1975-81), 2610, 3610, 4610 (1981-1990). (Part No: DCK1) $27.06 [Enlarge Picture] Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair- one right and one left). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, SUPER DEXTA, Jubilee. (Part No: 957E5967) $22.06 [Enlarge Picture] Drawbar w/ 2.750 - 34.625" long, 2.00" wide, 1.250" high, .937" dia. front holes @ 1.343", 3.343", 5.718", & 7.718" from front. For Models: 3900, 4000 W 540 1000 PTO '65->, 4600. (Part No: C5NN805F) $162.51 Drawbar, Fixed - For 1600, 1700, 1900, 1910, 2110, 1000 all late models. Fixed Drawbar is 2.38 inches wide, 1.12 inches thick, and 33.75 inches long. (Part No: SBA370710030) $105.78 [Enlarge Picture] Drawbar, Heavy Duty, Heat Treated - Red bar is 30 1 2" L Hole Center To Hole Center, 2 1 2" Wide, 1 1 8" Thick (drawbar fits lift between lift arms) (Part No: 9N5182) $54.40 [Enlarge Picture] Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1 2" L Hole Center To Hole Center, 2 1 2" Wide, 1 1 8" Thick (drawbar fits lift between lift arms). (Part No: 9N5182) $54.40 [Enlarge Picture] Drawbar, Standard, Red - Drawbar is 1" x 2-1 2" x 26", with 7 8" pins, (Category I). (Part No: 9N5182A) $43.56 [Enlarge Picture] Eyelet Assy, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1 1953 & newer), (4000 RowCrop 1 1953 & newer). (Part No: EC0N660A) $5.99 [Enlarge Picture] Fork - Fork for leveling box. Length 20". For 3055, 3550, 4000. (Part No: C5NN585B) $55.77 [Enlarge Picture] Fork - Fork for leveling box. Length 20" thread 13 16"-12. For 3900, 4100, 4110, 420, 4600, 4610, 515, 532, 535, (Part No: E0NN585CA) $62.19 [Enlarge Picture] Gear, Leveling Box - For Models: 5000, 7000, 8000, 8700, 9000, 9600, 9700, 5600, (5610, 6610, 6710, 6810, 7610, 7710, 5900 up to 12 82), 6600, 6700, 7600, 7700, TW10, TW20, TW30. Part # 4 in the picture. (Part No: C7NN568B) $19.90 [Enlarge Picture] HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), , four(4) of HP-5 (wire dia 1 8, length 2 9 16), , and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X) $4.99 [Enlarge Picture] HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), , four(4) of HP-5 (wire dia 1 8, length 2 9 16), , and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X) $4.99 [Enlarge Picture] HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $12.57 [Enlarge Picture] HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $12.57 [Enlarge Picture] HITCH BALL 15000LB 2-5\16 - 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138) $19.87 [Enlarge Picture] HITCH BALL 15000LB 2-5\16 - 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138) $19.87 [Enlarge Picture] HITCH BALL 2000LB - 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $7.66 [Enlarge Picture] HITCH BALL 2000LB - 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $7.66 [Enlarge Picture] HITCH BALL 3500LB - Hitch ball. 2" ball size, 3\4" stud thread, 1-7\8" stud length, 3500 lb. max load capacity, one\two chrome hitch ball class. (Part No: CHB234) $7.87 [Enlarge Picture] HITCH BALL 3500LB - Hitch ball. 2" ball size, 3\4" stud thread, 1-7\8" stud length, 3500 lb. max load capacity, one\two chrome hitch ball class. (Part No: CHB234) $7.87 [Enlarge Picture] HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $9.19 [Enlarge Picture] HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $9.19 [Enlarge Picture] Hanger - Drawbar hanger. For 800, (Part No: NDA809A) $49.47 [Enlarge Picture] Implement Yoke - Yoke, 1-3\8, 6 spline plain. For Model: 907. (Part No: 14N220-21) $29.98 LINCH PIN - Package of 10 linch pins. Pin diameter 1 4 inch, useable length 1 1 4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90 [Enlarge Picture] LINCH PIN - Package of 10 linch pins. Pin diameter 5 16 inch, useable length 1 1 4 inch, Ring diameter 1 5 8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $3.90 [Enlarge Picture] LINCH PIN - Package of 10 linch pins. 7 16" dia. pin x 1-3 4" useable length, 1-5 8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90 [Enlarge Picture] LINCH PIN - LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90 [Enlarge Picture] Level Box Fork - Right - Fork, hydraulic lift leveling rod, Right Hand. Length 10-1 4". For 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N585A) $24.90 [Enlarge Picture] Level Box Handle - Lever handle. For 2000, 2N, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: 9N594) $3.32 [Enlarge Picture] Leveling Arm - Right Hand Leveling Arm Assembly For 600, 700, 800, 900. Adjustment is 20.250" to 25.250" center hole to center hole. (Part No: 6N577A) $76.90 [Enlarge Picture] Leveling Arm - Right Hand Leveling Arm Assembly For 2000, 2600, 2610, 3000, 3100, 3600, 3610, 2100, 4110. Adjustable length 'A' is approx 21 to 25 inches. (Part No: E0NN569AA) $60.10 [Enlarge Picture] Leveling Arm - Left Hand Leveling Arm Assembly For 2000, 2600, 2610, 3000, 3100, 3600, 3610, 2100, 4110 (Part No: 2N564B) $49.58 [Enlarge Picture] Leveling Arm - Rod and Yoke, Left Hand. 5 8" hole, 13-3 8" long, 3 4" coarse thread. All purpose with Cat. I. Replaces C5NNN673A. For Models: 4000 (1965-1975). (Part No: E4NNN673AA) $33.55 [Enlarge Picture] Leveling Arm Assembly - Right Hand Leveling Arm Assembly 27 1 4 to 32 1 4 inches pin to pin. For 3550, 4000, 4400, 4500, 4600 (Part No: C5NN569AM) $74.48 [Enlarge Picture] Leveling Box - Box assembly, leveling Right Hand, adjustment is 25" to 31". For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: D2NNN983AWF) $165.01 Leveling Box Assembly - Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 9N, 2N, 8N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B) $47.99 [Enlarge Picture] Leveling Box Assembly - Right - Right Hand Leveling Box Assembly with fork. Adjusts 19 to 24 inches. For 2N, 8N, 9N, NAA, Jubilee. (Part No: 8N577A) $66.14 [Enlarge Picture] Leveling Box Assembly w/ Fork & Knuckle - For Models: 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210. Replaces E0NN569KA. (Part No: E0NN569KB) $182.13 Leveling Box Assembly w/ Fork & Knuckle - Category I, 28" minimum length, 7 8" fork spacing, 3 4" holes. For Models: 3900, 4600SU, 2810, 2910, 3910, 4110, 4610, 250C, 260C, 340A, 340B, 345C, 420, 445, 445A, 445B, 445C, 515, 532, 535, 540, 540A, 540B, 545, 545B, 545C. (Part No: E4NN569BA) $182.84 [Enlarge Picture] Leveling Box Assembly, Right Hand - Right Hand Leveling Box Assembly with fork. Adjusts 20.25 to 25.25 inches. For Ford tractors: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4000 (Except Row Crop), 4110, 4600. INDUSTRIALS: 3550, 420. (Part No: NCA577A) $96.14 [Enlarge Picture] Leveling Box Gear - Gear, leveling box pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: B9NN568A) $6.42 [Enlarge Picture] Leveling Box Knuckle Pin - MUST ORDER IN QTY 2 PRICED EACH.``For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 9N, 2N, 8N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5 8 Pin Dia. 2 7 8 usable length. Takes our 3 16 Linch pin (P N DKP316). MUST ORDER IN QTY 2, PRICED EACH. (Part No: 9N595) $1.64 [Enlarge Picture] Leveling Box Knuckle, Right - Knuckle, Right Hand leveling assembly. For Models: 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA. Uses 2 pins P N 9N595. (Part No: 957E566) $4.89 [Enlarge Picture] Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A) $38.89 [Enlarge Picture] Leveling Rod - Leveling rod and yoke, Left Hand. For Models: 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7910. (Part No: C5NNB863C) $60.64 Leveling Rod Assy, Left Hand - Left Hand Leveling Arm Assembly For 600, 700, 800, & 900 series. Center to center range is 22 3 4 to 25 1 4 inches. (Part No: 6N564B) $37.65 [Enlarge Picture] Leveling Rod Fork - Fork for leveling rod, Right hand side. Length 14-3 4". For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: NCA585B) $35.70 [Enlarge Picture] Lift Arm - Right or left hand, 5 8" thick x 2-1 2" wide, 24.75" center to center. For Models: (1110, 1210 from 1 1983 and up), ((1200 from 1 1979 and up). (Part No: SBA370100160) $99.90 [Enlarge Picture] Lift Arm - For 8N, 2N, 9N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement available in three lengths. 31-3 4, 32, or 32-1 4.Please specify in comments section which Length you prefer. (Part No: 9N555B) $51.53 [Enlarge Picture] Lift Arm - 32 Inch - Cat 1 - Lift Arm - Red. Category 1. 32inch length, 7 8" holes in end sockets (swivel type). Replaces 180846M91 and 30543E91. (Part No: JSA1002R) $45.41 [Enlarge Picture] Lift Rod, LH - Three center to center hole positions 14.62", 16.12", and 17.62". For Models: (1110, 1210 from 1-1983 and up), (1200 from 1 1979 and up). (Part No: SBA370200380) $46.27 [Enlarge Picture] Link End - Plated, forged, 1-1 4" thread, left hand, 1" hole. (Part No: RE1717L) $29.96 [Enlarge Picture] Link End - Plated, forged, 1-1 4" thread, right hand, 1" hole. (Part No: RE1718R) $30.76 [Enlarge Picture] Lower Lift Arm - For Dexta. Lower Lift Arm. Right or Left. THESE LIFT ARMS ARE 33" CENTER TO CENTER OF BALLS, CHECK DIMENSIONS OF OLD ARMS BEFORE ORDERING, MAY NEED TO BE ORDERED IN SETS ! (Part No: 957E555) $59.34 Lower Lift Arm, Cat II - Left or right hand, 34.646" center hole to center hole, 3.504" wide, .709" thick, Rigid forged type ends. For Models: 250C, 260C, 2810, 2910, 3000, 3055, 3230, 3430, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 445D, 4500, 4600, 4610, 4630, 4830, 5030, 515, 532, 535, 545D. Replaces 82002004, C5NN555AL, C7NN555S. (Part No: 81821330) $125.00 [Enlarge Picture] Lower Lift Arm, LH - Left hand, 9 16" thick, 5160 steel. 32 inch hole centers. For 600, 800 (1955-64); 2000, 3000, 2600, 3600 (1965-81). (Part No: D0NN555CLH) $79.90 [Enlarge Picture] Lower Lift Arm, RH - Right hand, 5160 steel. 32 inch hole centers. For 600, 800 (1955-64); 2000, 3000, 2600, 3600 (1965-81). (Part No: D0NN555DRH) $61.31 [Enlarge Picture] Lower Lift Link Pin - For Models: (2000, 4000 4 cyl 1 1955 and up), 800, 900 1 1955 and up. (Part No: NCB563A) $15.10 Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C) $13.30 [Enlarge Picture] Lower Link Support Shaft - For 2N, 9N Lower Link Support Shaft anchors lower lift arm to tractor. Does not come with nuts or pins. (Part No: 9N563) $23.64 [Enlarge Picture] Mounting Arm - For Model: 4000. (Part No: BU10215) $50.81 Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $9.44 [Enlarge Picture] Pull Arm - RH or LH 5 8" x 2-1 2", 27.87" center to center. For Models: (1320, 1520, 1620 1 1987 and newer, 1715 1 1993 and newer. (Part No: SBA370101092) $89.38 Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $293.81 [Enlarge Picture] Rod Leveling - Leveling rod assembly, Left Hand, adjustment is 27" to 33". For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: C5NNB863CWKF) $94.01 [Enlarge Picture] Rod Leveling - Leveling rod assembly, Left Hand, adjustment is 21-3 4" to 24-3 4". For 2000, 3100, 3120, 3300, 3310, 334, 3400, 3500, 3610, 4110, (Part No: C7NN564B) $43.10 Rod Leveling - Leveling rod assembly, Left Hand, adjustment from 27-1 2" to 32". For 230A, 2310, 231, 233, 2600, 2610, 3000, 333, 334, 335, 3600, 3610, 4000, 4600, 4610, 530A, (Part No: E0NNB484DA) $67.85 [Enlarge Picture] Shaft Level Box - Shaft with pinion gear. Length 12". For Models: 4000, 4600. (Part No: C5NN579E) $15.86 [Enlarge Picture] Shaft Level Box - Shaft with pinion gear. Length 12". For Models: 2000, 3100, 3120, 3310, 3400, 3500, 3600, 4110, 4600. (Part No: C5NN579F) $15.86 [Enlarge Picture] Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: NCA579B) $9.86 [Enlarge Picture] Stabilizer Arm Assembly - Stabilizer arm assembly less brackets and U-bolts. For 2910, 3910, 4110, 4610, (Part No: D9NNB856BB) $83.86 [Enlarge Picture] Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7 8" hole dia. (Part No: 230042XHD) $19.90 [Enlarge Picture] Stabilizer Arm Red - Arm only, red. Length 31-1\2 center to center. For Models: 2N, 600, 800, 8N, 9N, JUBILEE, NAA. (Part No: 230042R) $11.89 [Enlarge Picture] Stabilizer Assembly - Complete stabilizer assembly. For Models 5610, 6610, 6710, 7610, 7710, 8210. (Part No: D9NNB856AA) $115.37 [Enlarge Picture] Stabilizer Bar Left Hand - Link, stabilizer, Left Hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU, (Part No: C5NNN455B) $29.47 [Enlarge Picture] Stabilizer Bar Left Hand - Link, stabilizer, Left Hand. For 2000, 2600, 3000, 3600, 4110, (Part No: C5NNN455C) $29.14 [Enlarge Picture] Stabilizer Bar Right Hand - Link, stabilizer, Right Hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU, (Part No: C5NN454B) $29.47 [Enlarge Picture] Stabilizer Bar Right Hand - Link, stabilizer, Right Hand. For 2000, 2600, 3000, 3600, 4110, (Part No: C5NN454C) $29.14 [Enlarge Picture] Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly.For Models: 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 5000, 765, Dexta, Super Dexta. (Part No: 49A93) $42.98 [Enlarge Picture] Stabilizer Kit - CAT I Lift stabilizer kit. For 2000, 3000, 4000, all 1965 and up. Also 2600 and 3600 1975 and up. Includes stabilizer bars and mounting hardware. (Part No: SK23-6X) $69.76 [Enlarge Picture] Stabilizer Kit Left Bracket - Single chain assembly; does not include brackets or U-bolt. For Models: 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: CFPND936B-LB) $41.92 Stabilizer Kit Red - Complete kit, red. For 2N, 600, 800, 8N, 9N, Jubilee, NAA. ** $10 added to shipping due to weight **. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 231253) $42.07 [Enlarge Picture] Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 9N, 2N, 8N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets w pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 231253XHD) $60.02 Stay Strap, Lower Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375) $7.58 [Enlarge Picture] Stay Strap, Upper Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374) $11.40 [Enlarge Picture] Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. 600, 800, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. (Part No: C0NN805F) $54.89 [Enlarge Picture] Swinging Drawbar Clevis Assembly - Clevis assembly with pins for SDA6 or SDA8 kits. For Models: 600, 800, 8N, NAA. (Part No: NCA803B) $31.29 [Enlarge Picture] Swinging Drawbar Hanger - Drawbar hanger. For 600, 8N, NAA, (Part No: NCA809A) $41.63 [Enlarge Picture] Swinging Drawbar Kit - Fits:800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, (and 4000 except Rowcrop 1965 & up). Contains: Drawbar, Hanger, Clevis & pin. ADD $15 TO SHIPPING DUE TO WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: S.60597) $100.70 [Enlarge Picture] Swinging Drawbar Kit - Fits tractors: 2000, 2310, 2600, 2610, 3000, 3600, 3610. INDUSTRIALS: 230A, 231, 233, 2110LCG, 333, 335, 3400, 3500, 420, 530A, 531, 535. (Part No: CFPN820A*) $243.14 [Enlarge Picture] Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. (Part No: 49A34R) $104.50 [Enlarge Picture] Thrust Bearing - Bearing assembly. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: 9N554) $11.99 [Enlarge Picture] Top Link - Top Link, Cat. II both ends, adjusts 24-3 4" to 34-3 4". (Part No: D0NN576A) $79.80 Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 16 to 24 inches overall. Dichromate plated. (Part No: JSA1012C) $23.90 [Enlarge Picture] Top Link - Top link, 19" body. 1-1 4" Category III ball joints. Forged end with 1-3 8" threads. Swedged steel center section. Adjusts 25-1 2" to 36-1 2" overall. Dichromate plated. (Part No: TL185) $71.94 [Enlarge Picture] Top Link - Top link, 19" body. 1-1 4" Category III ball joints. Forged end with 1-3 8" threads. Swedged steel center section. Adjusts 25-1 2" to 36-1 2" overall. Dichromate plated. (Part No: TL185) $71.94 [Enlarge Picture] Top Link Rocker - Fits: 2000 3-cyl 1 1965 & newer, 2600 1 1975 & newer. 'A' in picture is a ROUND HOLE (used w one way draft control). (Part No: C7NN535B) $48.69 [Enlarge Picture] Top Link Rocker - Note: 'A' in picture is an OVAL hole (used with two-way draft control). Fits: 2000 3 CYL. 1 65>, 2600 1 75>, 2610 1 81-4 83, 3000 1 65> , 3600 1 75> , 3600N 1 75>, 3610 1 81-12 82, 3610N 1 81-12 82. (Part No: E0NN535AA) $85.47 [Enlarge Picture] Top Link Rocker - For 9N, 2N, 8N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A) $66.10 [Enlarge Picture] UNIVERSAL HITCH BALL 10000LB 2-5\16 - 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $17.39 [Enlarge Picture] UNIVERSAL HITCH BALL 10000LB 2-5\16 - 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $17.39 [Enlarge Picture] Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $25.00 [Enlarge Picture] Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $49.90 [Enlarge Picture]   Hydraulic System 2 Spool Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For Model: 5900. (Part No: HV5920) $599.95 3 Spool Valve Kit - Kit assembly, includes 3-spool valve, valve box with handles. For Model: 5900. (Part No: HV5930) $902.88 Back Up Ring - Ring, back-up, for lift cylinder piston. For Model: 4000. (Part No: D1NN473A) $6.24 [Enlarge Picture] Bearing - Needle bearing assy. pump hsg. For 2000, 4000, 501, 600, 700, 800, 900, JUBILEE, NAA (Part No: NCA881A) $9.20 [Enlarge Picture] Bushing - Bushing for hydraulic pump base, for PTO shaft. For 2N, 9N, 8N. (Part No: 9N649A) $29.94 [Enlarge Picture] Bushing Insert - Hydraulic Pump Bushing Insert. (Part No: 192164) $5.38 [Enlarge Picture] Bushing Kit - Cross Shaft bushing kit. Contains 1 bushing, 1 o-Ring, and 1 washer. For models 2000, 3000, 2600, 3600, 2310, 2610, 2910, 3610, 3910, IND 230A, 231, 233, 234, 2110LLG, 333, 334, 335, 340A, 3400, 3500, 4110LLG, 530A, 531. (Part No: DBPN531A) $28.63 [Enlarge Picture] Cam Block - For hydraulic pump, 9N, 2N and 8N (1939-52). (Part No: 9N617A) $55.70 [Enlarge Picture] Chamber Kit - Repair kit for one hydraulic pump chamber. Fits either Left or Right Chanbers. For 2N, 9N, 8N (Part No: 9N621KIT) $25.80 [Enlarge Picture] Clamp Double - Double break-away clamp. For Models: 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: 5006-4) $20.60 [Enlarge Picture] Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 & Safeway type S20-4 & S40-4 couplers. Quik-cover assembly HV4957 fits this clamp. Used on tractors with single pump hydraulic system, 1955 thru 1981 models. For Models: 500, 600, 700, 800, 900, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600. (Part No: S42-4) $26.78 [Enlarge Picture] Coupler Flange - FORD: Drive flange; 5 8" round bore with set screw 1 4" x 3 8" #SSH4-6. HYDRAULICS: Drive flange; 5 8" round bore with set screw 1 4" x 3 8" #SSH4-6. 2-1 4" b-b (Part No: L36-6) $63.65 [Enlarge Picture] Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1 8 inch DIA, with four 1 4 inch holes and 1-15 16 inch spacing.The drive flange is 3 4 round bore with set screw 1 4 by 3 8. (Part No: L601-14) $53.04 [Enlarge Picture] Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic pumps. Hub is 4" overall diameter, 4 mounting holes @ 7 16" diameter, smooth type, 2-3 4" spacing. 1-3 8" relief diameter, 9 16" depth, 10 spline, 1" center bore. (Note: Non-spline coupler hubs (keyed) are available in 5 8, 3 4, and 7 8in. -CALL). For Models: 2000, 4000, 501, 600, 700, 701, 800, 900, JUBILEE, NAA. (Part No: 290421) $44.90 [Enlarge Picture] Coupler Kit Single Spool - Coupler kit for TISCO 4000 series valves. For Model: 4000. (Part No: HV4298) $116.56 [Enlarge Picture] Cover Rep Kit - Master repair kit, for hydraulic lift cover. For 5000, 7000, (Part No: LCRK57) $28.28 [Enlarge Picture] Cross & Bearing Assembly - Cross & bearing kit for the hydraulic pump drive shaft, front. For Models: 340, 445, 4500, 535, 540, 545. (Part No: 293351) $11.88 Cylinder Seal Kit, For 2 in. cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2in. cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002) $17.22 [Enlarge Picture] Cylinder Seal Kit, For 3 inch Cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 3in. cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Part No: HSK3002) $18.60 [Enlarge Picture] Cylinder, Side Link - Hydraulic side link cylinder, 2" bore. (Part No: HSL2201) $207.17 [Enlarge Picture] Cylinder, Side Link - Side link hydraulic cylinder. (Part No: HSL3201) $250.93 [Enlarge Picture] Cylinder, Top Link - Top link hydraulic cylinder. (Part No: HTL3101) $250.93 [Enlarge Picture] Draft Control Plunger - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B) $32.29 [Enlarge Picture] Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B) $31.18 [Enlarge Picture] Draft Control Spring Plate - For Models: 9N, 2N (1939-1947). (Part No: 9N527) $16.48 [Enlarge Picture] Draft Control Spring Plate - For Models: 8N, NAA (1948-1954). (Part No: 8N527) $22.78 [Enlarge Picture] Draft Control Yoke - Fits 9N, 2N, 8N. (Part No: 9N546C) $29.70 [Enlarge Picture] Drive Gear Shroud, Hydraulic Pump - For Models: (3000, 340, 3900, 4000, 4100, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 4500, 4600, 460NO, 4600SU, 515, 532, 540, 545 all w independant PTO). (Part No: C5NNN872A) $31.59 [Enlarge Picture] Driveshaft - Shaft, Pump Drive. For Models: 445A, 445, 545A, 545. (Part No: E0NNA932AB) $141.04 Driveshaft - Intermediate shaft, oil pump drive. For Models: 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Part No: C7NN6A605A) $18.10 [Enlarge Picture] Driveshaft - Intermediate shaft, oil pump drive. For Models: 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700. (Part No: C7NN6A605A) $18.10 [Enlarge Picture] Driveshaft - Shaft, Pump Drive For 730 LOADER, 735 LOADER, 10 spline, length 8.75", shaft Dia..750", Diagonaly center to center 2.75", Side to side center to center 2.0", bolt Dia..375". (Part No: 290481) $72.14 [Enlarge Picture] Felt, Spring Seat - Hydraulic lift draft control spring seat. For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529) $3.71 [Enlarge Picture] Fork - Fork, hydraulic lift leveling rod, Right Hand. Length 14" center hole to end 3 4" threads. For Models: 2000, 230A, 2310, 234, 2610, 2810, 2910, 3000, 334, 335, 3600, 3610, 530A. (Part No: E0NN585BA) $35.70 [Enlarge Picture] Friction Disk - Hydraulic Control Lever. 3" dia. 1 2" hole. For Models: 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Price is for each. (Part No: C5NN518B) $.99 [Enlarge Picture] Gasket - Gasket, hydraulic lift cover. For (1965-1975): 5000, 7000. (Part No: C5NNA967B) $14.06 [Enlarge Picture] Gasket Kit - Piston type hydraulic pump gasket & O ring kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, JUBILEE, NAA. (Part No: FPN910B) $8.38 [Enlarge Picture] Gasket, Hydraulic Cylinder to Center Housing - 1" OD, 7 16" ID. For Models: 2N, 8N, 9N. Sold in quantities of ten priced individually. (Part No: 9N552) $.49 [Enlarge Picture] Gasket, Hydraulic Pump Drain - Fits 9N, 2N, 8N. Sold in lots of 5, Priced each. (Part No: 8N7011) $1.16 [Enlarge Picture] Hose Bracket - Hydraulic Hose Coupler Bracket. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 5900, 600, 6600, 700, 800, 900. (Part No: D6NND916D) $39.03 [Enlarge Picture] Hub - Coupler, Drive For 730 LOADER, (Part No: 291061) $44.81 [Enlarge Picture] Hub - 7 8" 13 spline threaded, 3-7 8" hole spacing. For 730 LOADER. (Part No: 291315) $48.41 Hydraulic Adapter Kit - Adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, o-rings and mounting instructions. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900, (Part No: HV4902) $54.01 [Enlarge Picture] Hydraulic Cover Blocking Plate - Fits 2000, 3000, 3930, 4000, 4100, 4110, 4130, 2600, 3600, 3900, 4600, 4610, 4630, 4830, 5030 INDUSTRIALS: 230A, 231, 233, 234, 333, 334, 335, 530A, 540, 540A, 540B, 545, 545A, 545B, 545C, 545D. (Part No: C5NN475B) $42.80 [Enlarge Picture] Hydraulic Filter - Spin-on type fits: 4100, 2310 W TANDEM MOUNTED PUMPS 1981 THRU 1983, 2600 W GEAR TYPE PUMPS, 2610 W TANDEM MOUNTED PUMPS 1981 THRU 1983, 3600 W GEAR TYPE PUMPS, 3610 W TANDEM MOUNTED PUMPS 1981 THRU 1983, 3910, 4110, 4600, 4610, 5600, 5610 W VERTICAL EXHAUST, 6600, 6610 W VERTICAL EXHAUST, 6700, 6710 W VERTICAL EXHAUST, 7600, 7610 W VERTICAL EXHAUST, 7700, 7710 W VERTICAL EXHAUST. (Part No: D6NNB486A) $10.39 [Enlarge Picture] Hydraulic Filter Kit - (Ford) Power Steering Filter - Power steering filter for pump reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Part No: EDPN3K758A) $10.90 [Enlarge Picture] Hydraulic Filter Spin-On, Intake - OD= 5.38", ID= 1.75", height= 9.62". For Models: 6510S, 6610S, 7610S, 8010, 5640, 6640, 7740, 7840, 8240, 8340, 8160, 8260, 8360, 8560. Replaces F0NNB486BB. (Part No: 82005016) $43.74 [Enlarge Picture] Hydraulic Filter, Steel Mesh - Also replaces 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3 4 inch tall, 2 1 8 inch Diameter with a 3 4 inch center 3 prong hole. Does not include rubber seals. (Part No: C5NNN832B) $14.95 [Enlarge Picture] Hydraulic Hose Assembly - Hose, 46". For Models: 1700, 1710, 1900, 1910, 2110. (Part No: HV4958) $21.98 [Enlarge Picture] Hydraulic Hose Assembly - Hose, 48". For Models: 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2110, 2120. (Part No: HV4959) $22.04 [Enlarge Picture] Hydraulic Hose Assembly - Hose, 12. For Models: 2000, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: H31-2M-12) $7.88 [Enlarge Picture] Hydraulic Lift Control Quadrant - For Models: 9N, 2N, 8N. Hydraulic lift control lever connects to this. (Part No: 9N515) $25.00 [Enlarge Picture] Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901 All prior to 1965. (Part No: LCRK5564) $7.16 [Enlarge Picture] Hydraulic Lift Cover Repair Kit - For 9N, 2N, 8N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 Valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928) $7.70 [Enlarge Picture] Hydraulic Lift Cover Repair Kit - For Models: 5000, 7000. (Part No: S.67550) $26.62 Hydraulic Lift Cover Repair Kit - For NAA 1953-64, Jubilee. Lift Cover Repair Gasket Kit. (Part No: LCRK5354) $5.98 [Enlarge Picture] Hydraulic Lift Cover Repair Kit - For tractors 2000 & 3000, 1965 and up. Lift cover repair gasket kit. (Part No: LCRK65UP) $13.08 [Enlarge Picture] Hydraulic Lift Cylinder - For 9N, 2N, 8N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Part No: 9N510D) $89.95 [Enlarge Picture] Hydraulic Lift Level Indicator (Dip Stick) - 9N, 2N, 8N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C) $5.76 [Enlarge Picture] Hydraulic Lift Lever - For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cyl.). (Part No: S.66598) $23.88 [Enlarge Picture] Hydraulic Lift Piston - Single groove piston 2-1 2" dia., groove is centered 1 1 4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For Models: NAA, NAB, 2N, 8N, 9N. (Part No: NAA530B) $26.20 [Enlarge Picture] Hydraulic Lift Piston - 3 ring Piston, hydraulic lift. For 2N, 8N, 9N. (Part No: 9N530B) $23.83 [Enlarge Picture] Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314) $35.53 [Enlarge Picture] Hydraulic Lift Piston O-Ring - For 9N, 2N, 8N. O-Ring used on piston #NAA530B. Price is for each. Used with lift piston washer #NAA473A. The leather washer gets put on first, then the o-ring. (Part No: NAA533A) $1.19 [Enlarge Picture] Hydraulic Lift Piston Rings - Kit of 3, steel, fits piston 9N530B. For Models: 2N, 8N, 9N. (Part No: 9N675) $7.50 [Enlarge Picture] Hydraulic Lift Piston Washer - For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston #NAA530B. Price is for each. (Part No: NAA473A) $2.76 [Enlarge Picture] Hydraulic Lift Ram Arm - Fits the following 3-cylinder engine tractors (1965 & newer): 2000, 3000, 4110LCG. (Part No: C5NN545B) $62.51 [Enlarge Picture] Hydraulic Lift Ram Arm - For 2N, 8N, 9N. This part will work for the 2N, 9N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and or shortening one end 1 4 inch and adjusting with shims. (Part No: 8N545B) $117.46 [Enlarge Picture] Hydraulic Lift Ram Arm - For NAA, Jubilee. (Part No: NAA545A) $106.08 Hydraulic Lift Ram Arm - For 600, 700, 800, 900, 2000, 4000. All before 1965 and with 4 cyl engines. (Part No: NCA545B) $102.39 [Enlarge Picture] Hydraulic Lift Rocker - For Models: (3000 1 1965 and up), (3600, 4100 1 1975 and up), (3610 from 1 1981 to 12 1982), (4000 3 cyl. 1 1965 and up), (4610 1 1981 and up), 4610SU. (Part No: E2NN535BA) $157.43 [Enlarge Picture] Hydraulic Lift Shaft Arm - For 2N, 8N, 9N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B) $86.34 [Enlarge Picture] Hydraulic Lift Shaft Bushing - 2 used. I.D. 2.000, O.D. 2-3\8, L. 3.00. For Models: 2N, 8N, 9N, NAA, 600, 800, 2000, 3000, 4114. (Part No: 9N531C) $14.45 [Enlarge Picture] Hydraulic Lift lever Assembly - For 9N, 2N, 8N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512) $36.07 [Enlarge Picture] Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00 Hydraulic Pump - For Models: 4635, 4835, both with Bosch Type Pump. Hydraulic pump replaces 517928, 8282886. (Part No: 5129486) $184.21 Hydraulic Pump - For Models: 340, 340A, 340B, 445, 445A, 450, 540. 22 GPM Hydraulic Pump. (Part No: D8NN600DA) $732.13 Hydraulic Pump - For 2244, 225, 400c, 4500, 6500 industrials. 50 Series, P Type LH rotation Hydraulic Pump. 2 Bolt Mounting, 7 8 inch shaft diameter, 1 5 8 inlet port, 1 5 16 outlet port. (Part No: 1075358M1) $403.71 [Enlarge Picture] Hydraulic Pump - CCW rotation, top port size is 0.560" & bottom port size is. 740". Flow is 42 Litres per minute. Replaces 1909916, 1930226, 5120850, 5169770, 5113283. For Models: 4010S, 5010S, 700, 7530, 766DT, 980, TK75, TK85, TK85M. (Part No: 5129488) $223.45 [Enlarge Picture] Hydraulic Pump - 31 litres min. Counter-clockwise rotation. For Models: 3010S, 3435, 3830, 4010S, 4030, 4230, 4330V, 4430, 5010S, 5530, 6530, 7530, 766DT, (980 s n 708863 and up), TK76, TK85, TK85M. Replaces 5179719, 1930068, 5120849, 8282339, 1901324, 1930052, 1930057, 5120297, 8280127, 5169772, 5113284. (Part No: 5129483) $172.81 [Enlarge Picture] Hydraulic Pump - Loader Backhoe, 26 GPM. For Models: 445, 540, (540A, 555 1 1983 and up), 550. (Part No: D8NN600AA) $579.80 [Enlarge Picture] Hydraulic Pump - For Models: 4230, 4430. (Part No: 5179730) $130.68 [Enlarge Picture] Hydraulic Pump - Engine mounted. For Models: 2810, 2910, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 340A, 340B, 445A, 540A, 540B, 545A. (Part No: E2NN600AB) $650.03 [Enlarge Picture] Hydraulic Pump - 21.5 GPM at 2100 RPM, 2200 PSI, left hand rotation, 7 8" dia. 13 tooth shaft, 1-5 16" outlet port, 1-5 8" inlet port, 2 bolt mount slots are 9 16" and open at the ends, minimum measurement between the slots is 5-1 4" maximum is 6-7 8". For Models: 712, 730, 735. (Part No: 50P027LBASB) $432.61 [Enlarge Picture] Hydraulic Pump - For models 5635, 6635. Replaces 5129486, 5169039, 5179728. (Part No: 5179728) $141.55 [Enlarge Picture] Hydraulic Pump - For models 4635, TL90. (Part No: 5179726) $156.46 Hydraulic Pump - For models: 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Also replaces 81816585. (Part No: C7NN3A674F) $499.90 [Enlarge Picture] Hydraulic Pump - For Models: 4000, 4500, 535, 550. 13 Splined, 7 8 inch shaft. Inlet is 1 1 4 in, Outlet is 5 8 in (both ports use press-in type fittings). Replaces D1NN600C. (Part No: D1NN600B) $627.88 [Enlarge Picture] Hydraulic Pump - For 3550, 4000 from 1965 with transmission mounted pump. Hydraulic Pump. (Part No: D0NN600F) $599.90 [Enlarge Picture] Hydraulic Pump - For Models: 5000, 5100, 5200, 7000, 7100, 7200. ALL w Dual Power. (Part No: D2NN600B) $841.99 [Enlarge Picture] Hydraulic Pump - Fits 5000, 5100, 5200, 7000, 7100, 7200 all 1965-1975 with transmission mounted pump. Hydraulic Pump. (R3568) (Part No: D0NN600G) $376.65 [Enlarge Picture] Hydraulic Pump - Fits the following tractors (less synchro transmission) using transmissision mounted pump with relief valve: 4600, 2810, 2910, 3900, 3910, 4100, 4110, 4610, 3230, 3400, 3430, 3930, 4130, 4630, 4830, 5030, 250C, 260C, 340A, 340B, 345C, 345D, 420, 455A, 445S, 445D, 515, 532, 535, 540A, 540B, 545A, 54C, 545D. (Part No: D8NN600LB) $434.28 [Enlarge Picture] Hydraulic Pump - For Models: 5100, 5600, 5610, 6600, 6610, 6710, 7100, 7600, 7610, 7700, 7710, 7810, 7910, 8210, all with transmission mounted, gear type pump. Also replaces E0NN600AB. Hydraulic Pump. (R3570). (Part No: E0NN600AC) $489.72 [Enlarge Picture] Hydraulic Pump - For Models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3 1983, 5610, 6610, 6710, 7610, 7710 1981-9 1985, 7210, 8210 1982-10 1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. Hydraulic Pump also replaces E1NN600AA. (Part No: E1NN600AB) $633.96 [Enlarge Picture] Hydraulic Pump - For Models: 5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 with transmission mounted Gear Type Pump. (Part No: D8NN600KA) $439.82 [Enlarge Picture] Hydraulic Pump - For Models: 5640, 6640, 7740, 7840, 8240, 8340 all with transmission mounted, gear type pump. (Part No: F0NN600BB) $999.90 [Enlarge Picture] Hydraulic Pump - For Models: TW10, TW20 1979-1982, TW5, TW15, TW20. Hydraulic Pump, transmission mounted pump. (Part No: D8NN600FA) $450.00 Hydraulic Pump - For Models: 8530, 8630, 8730, 8830, TW5, TW10, TW25, TW30, TW35. Hydraulic Pump, transmission mounted. NOTE: Gear is NOT included. (Part No: E2NN600BA) $532.44 [Enlarge Picture] Hydraulic Pump Assembly for Loader - Hydraulic pump kit for 701, 702, and late 703 loaders. Consist of 2 bolt flange mount pump, a removeable 2 bolt foot mount bracket, 2 mounting bolts & washers and 2 adapters. 14gpm at 2000rpm capacity. Shaft: 3 4" diameter, round with key type. Left-hand rotation, combo mounting. SPECS:``CAPACITY GPM @ RPM: 14 @ 2000, ``SHAFT DIAMETER: 3 4in., ``SHAFT TYPE: Round with key, ``ROTATION: Left hand, ``PORT SIZE INLET: 1" NPT ", ``PORT SIZE OUTLET: 3 4" NPT ", ``MOUNTING: 2 bolt SAE 'A', ``FORD PUMP APPLICATION: 701, 702, late 703 loader.``CAPACITY GPM @ RPM: 14 @2000, ``SHAFT DIA: 3 4 ", ``SHAFT TYPE: Round with key, ``ROTATION: Left hand, ``MOUNTING: Combo, ``INLET: 1" NPT, ``OUTLET: 3 4" NPT, (Part No: 195453) $366.60 [Enlarge Picture] Hydraulic Pump Control & Safety Valves - Hydraulic Pump Safety Valve Assy. For Models: 600, 700, 800, 900, 2000, 4000. (Part No: NCA638C) $55.46 [Enlarge Picture] Hydraulic Pump Control Valve - Hydraulic Pump Control Valve Assy. For Models: NAA, Jubilee. (Part No: NAA638E) $52.80 [Enlarge Picture] Hydraulic Pump Drive For 730 Loader - Pump Drive For 730 LOADER. Hydraulic pump shaft. 7 8" diameter, 10-3 8" overall length. End A type: 13 spline, 7 8" size. End B type: 13 spline, 7 8" size. Associated components end B hub: C5NNN879A, 291061, 291315. (Part No: 292222) $32.97 [Enlarge Picture] Hydraulic Pump Drive Gear - For Models: 4000, 5000, 7000. (Part No: C5NN866A) $40.89 [Enlarge Picture] Hydraulic Pump Drive Shaft - For Models: 4500, 535. Double U-joint assembly. 11-5 8" overall length. 4 bolt hub on end A, end B has 13 spline, 7 8" coupler. (Part No: C5NNA932C) $185.92 [Enlarge Picture] Hydraulic Pump Drive Shaft - APPLICATION: 9N, 2N, 8N, ``SHAFT DIAMETER: 3 4 ", ``SHAFT OVERALL LENGTH: 13-1 16 ", ``END A TYPE: Key, ``END A SIZE: 3 4 ", ``END B TYPE: LH Thread, ``END B SIZE: 5 8 " . END A mates to coupler L601-14. END B mates to hub 191196. (Part No: 190760) $11.92 [Enlarge Picture] Hydraulic Pump Drive Shaft - For models 9N, 2N, 8N. 3 4 inch shaft diameter, 13 inches in length, 6 spline on one end and key on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14. (Part No: 194354) $27.32 [Enlarge Picture] Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3 4" diameter, 9-1 4" overall length. End A type: key, 3 4" size , End B type: 6 spline, 3 4" size. Associated components end A flex. cplr: L601-14 (3 4" bore drive flanges both sides), end B hub: 1". Fits: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355) $25.90 [Enlarge Picture] Hydraulic Pump Drive Shaft - Shaft is 3 4" diameter, 9-3 8" overall length. End A type: key, 3 4" size. End B type: 10 spline, 1" size. Associated components: end A mates to flex coupler#: L601-14 (3 4" bore drive flanges both sides) and end B mates to hub#: 290421. Pump Drive For 1953-64 tractors: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, JUBILEE, NAA, 2000, 4000. (Part No: 195454) $34.89 [Enlarge Picture] Hydraulic Pump End Cover - For Models: (2000, 3000, 4000 from 10 1969 and up), 2110LCG, 3400, 3500, 4110LCG. (Part No: C7NN893C) $103.74 Hydraulic Pump Gear - Main gear for piston pump. Replaces NCA908A For Models: 2000, 4000, 600, 700, 800, 900, NAA. (Part No: C3NN908A) $21.02 [Enlarge Picture] Hydraulic Pump Gear Housing - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA905C) $149.62 [Enlarge Picture] Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7\8 OD, 2 3\4 Center to center on holes. 6 spline center bore, 3\4 ID. (Part No: 54C2055) $32.95 [Enlarge Picture] Hydraulic Pump Hub - For Models: 9N, 2N, 8N. Hydraulic pump hub is 3" OD, 2 13 32 center to center on pins (no holes). Includes pins. (Part No: 191196) $33.36 [Enlarge Picture] Hydraulic Pump Hub - For Models: 9N, 2N, 8N. Hydraulic Pump Hub 3 3 8" OD, 2 3 8 Center to center on holes. 6 spline - center bore = 5 8 in. on the lands and 3 4 in. on the grooves. Used with part #'s 192160 and 194354. (Part No: 192161) $41.97 [Enlarge Picture] Hydraulic Pump Hub - For models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. This pump has 13 splines and is NOT threaded used with 291951, 292222, 7701044, pump shaft. (Part No: C5NNN879A) $52.16 [Enlarge Picture] Hydraulic Pump Kit - Minor repair kit for 4.3 gpm piston type pump. For 2000, 4110, both 1965 and up. Services C5NN600-AB pump. (Part No: FHPK600-4) $40.18 Hydraulic Pump Overhaul Kit - For 9N, 2N, 8N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1) $159.50 [Enlarge Picture] Hydraulic Pump Rebuild Kit - Comprehensive - For Models: 9N, 2N, 8N (1939-52). Kit contains 2 cam blocks, 2 Pistons, 2 Chamber Repair Kits, PTO Shaft Bushing, Safety Valve, 2 Valve Chambers w Valves, Base Gasket, Sump Pump Gasket, 2 Side Gaskets, PTO Shaft Gasket, 2 Side Plate Gaskets. (Part No: S.61725) $356.76 [Enlarge Picture] Hydraulic Pump Repair Kit - Piston pump. Kit contains wobble shaft, wobble shaft needle bearing, idler gear shaft and needle bearings, wobble shaft bearing plate, 9 16" pistons x 6, 5 8" piston x 6, piston springs, inlet and outlet springs, balls, seats, cages, seals & gaskets. For Models: 2000, 3000, 4000, 2600, 2310, 2610, 3610, 230A, 231, 233, 211LCG, 3400, (3500, 3550, 4400, 4450 less Independant PTO), 333, 335, 340, 340A, 420, 445, 530A, 515, 531, 532. (Part No: S.65428) $207.68 [Enlarge Picture] Hydraulic Pump Repair Kit - Hydraulic Piston Type Pump Repair Kit. Services 1953-1964 four cylinder gas and diesel tractors. For Models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB) $34.90 [Enlarge Picture] Hydraulic Pump Repair Kit - For Models: 3000, 4000 (Except 4110) with 5.6 GPM Piston Type Pump 1965 and up. Contains springs, balls plate assy, gaskets & seals. Services C5NN600-AA pump. (Part No: FHPK600-5) $40.53 [Enlarge Picture] Hydraulic Pump Repair Kit - Major repair kit for 2000, 3000, 4000, all 1965 and up. For 2600, 3600, 4600 all 1975 and up. Services engine mounted pumps: C5NN600AA, C7NN600Y, C5KNN600AB, C7NN600Z all 1965 and up. D477600C and D6NN600A both 1975 and up. (Part No: CKPN600A) $68.32 [Enlarge Picture] Hydraulic Pump Safety Valve - For (4000, 5000, 7000), (Major, Super Major, Power Major all 1952-1964. Hydraulic Pump Safety Valve. (Part No: E1ADDN984) $28.24 [Enlarge Picture] Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies (Part No: NCA966E) $50.40 [Enlarge Picture] Hydraulic Pump Shaft - Wobble shaft. For Models: 2000, 3000, 4000, 2600, 3600, 4600 With Piston Type Pump, 1965 AND ABOVE WITH 6" THREADED SHAFT. (Part No: C5NN966A) $60.87 [Enlarge Picture] Hydraulic Pump Shaft - Shaft, Pump Drive For 730 LOADER. Hydraulic pump shaft. 7 8" diameter, 13-5 8" overall length. End A type: 13 spline, 7 8" size. End B type: 13 spline, 7 8" size. Associated components end B hub: C5NNN879A, 291061, 291315. (Part No: 291951) $29.78 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cone - Use with pump shaft C5NN9666A. For Models: (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Part No: CODW4621A) $8.55 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1201A) $5.70 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cup - Use with pump shaft C5NN9666A. For Models: (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Part No: CODW4616A) $5.62 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1202A) $4.30 [Enlarge Picture] Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures ID 0.9350, OD 2.004, W 0.5315. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA851A) $5.00 Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421).``SHAFT DIAMETER: 3 4 ", SHAFT OVERALL LENGTH: 8-3 8 ", ``END A TYPE: Key, ``END A SIZE: 3 4 ", ``END B TYPE: 10 Spline, ``END B SIZE: 1 ". (Part No: 197118) $36.49 [Enlarge Picture] Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For 9N, 2N, 8N. Polished Steel Finish. (Part No: 9N622) $145.81 [Enlarge Picture] Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, Less Valves. For Models: 9N, 8N, 2N. Cast Iron (Part No: 9N621-C) $102.36 [Enlarge Picture] Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For 9N, 2N, 8N. Polished Steel Finish. (Part No: 9N621) $131.97 [Enlarge Picture] Hydraulic Pump Valve Chamber Assembly, RH - Right hand valve Chamber with valves. For Models: 9N, 8N, 2N. (Part No: 9N621-ASSY) $106.92 [Enlarge Picture] Hydraulic Pump for Loader - Part_Desc: Pump, Hydraulic For 730 LOADER, 735 LOADER.SPECS: CAPACITY GPM @ RPM: 21.5 @ 2000, SHAFT DIAMETER: 7 8in. , SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5 8in.-12 ORB , PORT SIZE OUTLET: 1-5 16in.-12 ORB , MOUNTING: 2 bolt SAE 'B', FORD PUMP APPLICATION: 730 & 735 loaders, CAPACITY GPM @ RPM: 21.5 @ 2000, SHAFT DIA: 7 8in., SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE 'B', INLET: 1-5 8in.-12 ORB, OUTLET: 1-5 16in-12 ORB. (Part No: 7702425-29Z) $434.44 [Enlarge Picture] Hydraulic Pump, Transmission Mounted - For Models: 8000, 8600, 8700, 9000, 9600, 9700, all 1968-1978. Hydraulic Pump, mounts in transmission housing. 16 GPM. Replaces C7NN600D. (Part No: D5NN600C) $576.16 [Enlarge Picture] Hydraulic Relief Valve - For Models: 2000, 3000, 4000, 5000, 6000 (1965-1975). This valve is for piston or gear type in center housing. (Part No: C7NN638E) $85.53 [Enlarge Picture] Hydraulic Safety Valve Assy - For Models: 9N, 2N, 8N. (Part No: 8N638) $27.86 [Enlarge Picture] Hydraulic Spring Seat - For Models: 9N, 2N, 8N, NAA, 600, 900 (1948-1954). (Part No: 9N525B) $10.67 [Enlarge Picture] Hydraulic Strainer & Tube - Fits 5000, (5900 1 85 to 11 87). Less Dual power. (Part No: C5NNN994J) $29.00 [Enlarge Picture] Hydraulic Valve Assembly - For (9N with 9N600 Pump Assembly), (2N with 9N600 Pump Assembly 1939-1947). Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640) $30.25 [Enlarge Picture] Hydraulic Valve Kit - Valve with handle, single-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Part No: HV4010) $159.90 [Enlarge Picture] Hydraulic Valve Kit - Valve, hydraulic, with handle, single-spool multi-valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90° rotated handle. (Part No: HV4012) $143.19 [Enlarge Picture] Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. (Part No: HV4021) $282.80 [Enlarge Picture] Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030) $412.07 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 1-spool valve with handle. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: HV4111) $337.36 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 1-spool valve with handle. For 1700, 1710, 1900, 1910, 2110. (Part No: HV4116) $337.38 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 1-spool valve with handle. For Models: 1320, 1520, 1720, 1920, 2120. (Part No: HV4118) $372.20 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handle. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: HV4120) $526.52 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: HV4122) $572.68 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handles For 1320, 1520, 1720, 1920, 2120. (Part No: HV4124) $565.26 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For 1320, 1520, 1720, 1920, 2120. (Part No: HV4125) $629.20 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handles. For 1700, 1710, 1900, 1910, 2110. (Part No: HV4126) $503.93 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For 1700, 1710, 1900, 1910, 2110. (Part No: HV4127) $534.85 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handles. For 1700, 1710, 1900, 1910, 2110. (Part No: HV4128) $501.99 [Enlarge Picture] Hydraulic Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For 1700, 1710, 1900, 1910, 2110. (Part No: HV4129) $552.80 [Enlarge Picture] Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Part No: HV4020) $261.29 [Enlarge Picture] Hydraulic Valve Kit, Remote - Has double spool control to activate Two double-acting remote hydraulic rams. Kit includes: B8210 diverter valve, control valve, Pioneer breakaway kit, hoses and fittings. For DIESEL models: 2000, 3000, 4000, 2600, 3600, 3900, 2610, 3610, 3910, 4110, 4610. (Part No: B91468) $813.12 [Enlarge Picture] Hydraulic adapter Plate - Adapter plate kit. For Models: 1320, 1520, 1720, 1920, 2120. (Part No: HV4945) $66.02 [Enlarge Picture] Hydraulic cylinder Kit - Draft control equipped tractors, 2-spool valve kit complete.Contains: Hydraulic top link cylinder, (2"bore, 8" stroke, closed length 20", 3 4" ends), Side link cylinder, 2", Valve( 2-spool, 2000 psi, relief, tandem (4-way)spool, spring center to neutral, less handles.), Valve Box Assy (with handles installed, top mount), Adapter plate kit (tractors with draft control). For Models: 1700, 1710, 1900, 1910, 2110. (Part No: HCKF192D) $887.78 [Enlarge Picture] Hydraulic cylinder Kit - Regular (no draft control), 2-spool valve kit complete.Contains: Hydraulic top link cylinder, (2"bore, 8" stroke, closed length 20", 3 4" ends), Side link cylinder, 2", Valve( 2-spool, 2000 psi, relief, tandem (4-way)spool, spring center to neutral, less handles.), Valve Box Assy (with handles installed, top mount), Adapter plate kit (tractors without draft control). Fits: 1700, 1710, 1900, 1910, 2110. (Part No: HCKF192R) $896.27 [Enlarge Picture] Hydraulic cylinder Kit - Draft control equipped tractors, Draft control equipped tractors, 3-spool valve kit complete.Contains: Hydraulic top link cylinder, (2"bore, 8" stroke, closed length 20", 3 4" ends), Side link cylinder, 2", Valve( 3-spool, 2000 psi, relief, tandem (4-way)spool, spring center to neutral, less handles.), Valve Box Assy (with handles installed, top mount), Adapter plate kit (tractors with draft control). Fits: 1700, 1710, 1900, 1910, 2110. (Part No: HCKF193D) $1090.01 [Enlarge Picture] Hydraulic cylinder Kit - Regular (no draft control), Draft control equipped tractors, 3-spool valve kit complete.Contains: Hydraulic top link cylinder, (2"bore, 8" stroke, closed length 20", 3 4" ends), Side link cylinder, 2", Valve( 3-spool, 2000 psi, relief, tandem (4-way)spool, spring center to neutral, less handles.), Valve Box Assy (with handles installed, top mount), Adapter plate kit (tractors without draft control). Fits: 1700, 1710, 1900, 1910, 2110. (Part No: HCKF193R) $1098.36 [Enlarge Picture] Hydraulic cylinder Kit - 2-spool valve and cylinder kit complete. For Models: 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900, (Part No: HCKF262) $966.01 [Enlarge Picture] Hydraulic cylinder Kit - 3-spool valve and cylinder kit complete. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900, (Part No: HCKF263) $1132.64 [Enlarge Picture] Hydraulic cylinder Kit - 2-spool valve and cylinder kit complete. For Models: 1320, 1520, 1720, 1920, 2120. (Part No: HCKF292) $900.67 Hydraulic cylinder Kit - 3-spool valve and cylinder kit complete. For Models: 1320, 1520, 1720, 1920, 2120. (Part No: HCKF293) $1043.59 [Enlarge Picture] Hydraulic hose Assembly - For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: H31-SPL-26) $29.34 [Enlarge Picture] Hydraulic hose Assembly - Hose, 30" long. For Models: 1320, 1520, 1720, 1920, 2120, 5900. (Part No: H31-SPL-30) $29.61 Hydraulic hose Assembly - Hose, 44". For Models: 4000, 5900. (Part No: H31-SPL-44) $33.25 Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPT Male solid. (Part No: HV4961) $31.78 [Enlarge Picture] Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPT male solid. (Part No: HV4962) $31.92 [Enlarge Picture] Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPT male solid. (Part No: HV4964) $31.11 [Enlarge Picture] Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPT Male solid. For Models: 1700, 1710, 1900, 1910, 2110. (Part No: HV4966) $33.85 [Enlarge Picture] Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPT. For Models: 1700, 1710, 1900, 1910, 2110. (Part No: HV4967) $39.87 [Enlarge Picture] Hydraulic hose Assembly - Hose, Hose Assembly 1 4 NPTM solid. (Part No: HV4981) $41.42 [Enlarge Picture] Hydraulic hose Assembly - Lift cylinder extension hose, 24" overall length, 3 8" I.D., 1 wire braid 100 R1-AT, 7 8"-14 ORB male swivel x 7 8"-14 37° flare male solid. For 735 LOADER, (Part No: 292841) $28.04 Hydraulic pump base to center housing Gasket - For Models: 9N, 2N, 8N. (Part No: 9N611) $1.65 [Enlarge Picture] Hydraulic side Link - Side link cylinder, 2". (Part No: HSL2203) $219.87 Hydraulic top Link - Hydraulic top link cylinder, 2" bore. (Part No: HTL2102) $207.17 [Enlarge Picture] LBP 291016 Hose Assembly - Hose, valve bank to cylinders (6 used). For Backhoe Models: 735, 750, 755. (Part No: D8NND558EA) $37.30 LBP Coupler Center - Center member. Center member. 3-5 8" O.D., four 5 16" holes, 2-1 4" bolt circle (L52-10) For Models: 352. (Part No: 192169) $36.90 [Enlarge Picture] LBP Cylinder RPR - Cylinder packing kit. For Models: 100, 85, 87, 89, 90, 92, 93, 94, 95, H800-51. (Part No: L609-145) $37.20 LBP Packing Kit - Cylinder packing kit. For Models: 55000CR, H800-5. (Part No: L609-104) $36.30 Lift Cylinder Safety Valve - Hydraulic Lift Cylinder Safety valve. For 4000, 5000, 7000, MAJOR, (Part No: DDN984) $35.33 [Enlarge Picture] Lift Cylinder Safety Valve - For Models: 2000 (4cyl 2120 2150 2300 230A 231 2310 233 234 2600 2610 2810 2910 3000 3055 3110 3120 3150 3300 3310 333 3330 334 335 340 3400 340A 340B 3500 3600 3600V 3610 3900 3910 4000 (4110 4120 420 445 445A 450 4600 4600SU 4610 515 530A 531 532 535 540 540A 540B 541 545 545A 600 6000 601 Series 62-64) 650 660 701 Series 800 801 Series Dexta Super Dexta. Also replaces 957E9842 and C5NN984A. (Part No: 957E984B) $26.93 [Enlarge Picture] Lock Washer, Special - Hydraulic lift shaft to arm. For Models: 9N, 8N, NAA (1939-1954). (Part No: 9N550) $6.25 [Enlarge Picture] Male Tip - Male tip-check valve assembly, implement half. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30 (Part No: D5NNB964A) $9.72 [Enlarge Picture] Moreflex Drive Kit - Morflex Series 352 coupler complete with 2 drive flanges(3 4in w key), set screws, 4 bolts & lock nuts. Mounting is four 5 16in. holes spaced 2-1 4in apart. (Part No: L601-9) $66.71 [Enlarge Picture] Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7\8 dia. shaft. 5\16 dia. bolt holes 2-1\4 on center. For 352 (Part No: L78-13) $31.98 [Enlarge Picture] O-Ring & Seal Kit - For lift cover, cylinder, pump contains both old and new style piston seals. For Models: Dexta, Super Dexta. (Part No: S.04725) $27.95 [Enlarge Picture] Pin, Hydraulic Lift Rocker - Lift rocker pin to rear end housing. 3 4" x 3.14". For Models: 9N, 2N, (1939-1947). (Part No: 352625S8) $6.00 [Enlarge Picture] Piston - Piston ONLY. Back-up Ring NCA473A $2.00 (min qty 5 ea) and O-ring seal 87111S95 $1.00 (min qty 5 ea) are NOT included. If needed, Specify in 'COMMENTS' when ordering. Fits: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: C5NN530B) $29.98 [Enlarge Picture] Piston for Hydraulic Pump - For 9N, 2N, 8N (1939-52). (Part No: 9N615) $36.75 [Enlarge Picture] Pump - Hydraulic pump, gear type, mounted in center housing. For Models: 5600, 6600, 6700, 7600, 7700. (Part No: D8NN600KB) $499.65 [Enlarge Picture] Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624) $7.16 [Enlarge Picture] Selector Valve - For Models: 2000 and 4000 (1965 & newer-except Rowcrop), 2600, 3000, 3600, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630, 4830, 5030. INDUSTRIALS: 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340(A, B, C), 345 (C, D), 3400, 3500, 3550, 420, 445 (A, C, D), 450, 4500, 515, 530A, 531, 532, 535, 540, 540 (A, B), 545 (A, C, D). (Part No: E0NND960AA) $186.85 [Enlarge Picture] Superior & Wagner Loader Hydraulic Pump Kit - Hydraulic pump kit for various loaders mounted on Ford tractors. Pump specifications: 14GPM @ 2000RPM, 3 4" round shaft with key, left hand rotation, Inlet port 1" NPT, Outlet port 3 4" NPT. Kit includes hyd. pump, foot flange bracket, 2 mounting bolts & washers, and 2 adapters. Replaces 3660. (Part No: L827-10X) $376.10 [Enlarge Picture] Swivel - Draft Control - For Models: NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 957E692) $23.28 [Enlarge Picture] Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9 16-18 O-ring boss with two adapters 9 16-18 ORBM x 1 4 NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 closed length, 12-7 16 barrel length, 1 rod end diameter, 1-3 4 rod end width, 1 diameter base end. (Part No: HTL3103) $250.93 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG400) $20.90 [Enlarge Picture] Valve - Valve, single-spool, pressure detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900, (Part No: D9NNB950BB) $620.33 Valve - Valve, single-spool, (non-detent spring centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900, (Part No: E1NNB950AB) $486.82 Valve - Valve, double-spool, (non-detent spring centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900, (Part No: E1NNB950BB) $646.57 Valve - Valve, double-spool, pressure detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900, (Part No: E2NNB950CA) $947.99 Valve 1SP With H - Kit assembly, includes 1-spool valve (pressure detent) and handle & valve mounting kit. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: D9NNB950BB-KIT) $623.02 [Enlarge Picture] Valve Box - Valve box assembly with handles installed, top mount. (Part No: HV4984) $74.10 [Enlarge Picture] Valve Box - Valve box horizontal mount, with three-handle assembly. All steel (14 gauge) unit has built-in handle pivots complete with actuator links. One straight handle in center position flanked by two offset handles. Removable cover has edge protectors installed. Will accommodate HV4033 valve or equivalent. Mounts on top of flat fenders. (Part No: HV4985) $89.80 [Enlarge Picture] Valve Handle - Handle with blue vinyl coated grip, for 1 & 2 spool valves. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900, (Part No: D3NNB936A) $28.14 Valve Kit, Double Spool Valve - Kit assembly, includes double spool valve (non-detent\spring centering), hoses, dust cover, couplers, handle & valve mounting kit. Valves are of current OEM design and bolt directly to tractor top hydraulic cover in place of accessory plate control handle are operated from RH side of operators seat. For Models: 500, 600, 700, 800, 900, 2000, 3000, 4000 all 1965 or before, 2000, 3000, 4000, 5000 all 1965-1975, 2600, 3600, 4600, 5600, 6600 all 1975-1981, 2610, 3610, 4610 all equipped w single pump hydraulic system 1981 and up. (Part No: DGPNB950S2-KIT) $915.73 [Enlarge Picture] Valve Kit, 1 Spool - Kit assembly, includes 1-spool valve (pressure detent), hoses, dust cover, couplers, handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: DGPNB950K1-KIT) $859.92 [Enlarge Picture] Valve Kit, 1 Spool - Kit assembly, includes 1-spool valve (non-detent\spring centering) and handle & valve mounting kit. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: E1NNB950AB-KIT) $491.30 [Enlarge Picture] Valve Kit, 1 Spool - These kits include single spool valve(non-detent spring centering), hoses, hose couplers, coupler bracket, self closing dust covers and handle mounting kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For Models: 500, 600, 700, 800, 900, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Part No: DGPNB950S1-KIT) $653.60 [Enlarge Picture] Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (pressure detent), hoses, dust cover, couplers, handle & valve mounting kit. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: DGPNB950K2-KIT) $1113.29 [Enlarge Picture] Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (non-detent\spring centering) and handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: E1NNB950BB-KIT) $675.31 [Enlarge Picture] Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (pressure detent) and handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: E2NNB950CA-KIT) $921.22 [Enlarge Picture] Valve Less Handle - Valve, 2-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral, less handles. (Part No: HV4023) $233.08 [Enlarge Picture] Valve Less Handle - Valve, 3-spool, 2000 psi. Relief, tandem (4 way) spool, spring center to neutral, less handles. (Part No: HV4033) $374.86 [Enlarge Picture] Valve Mount Kit - Handle & valve mounting kit, single-spool. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: 309972F) $37.87 Valve chamber to base Gasket - For Models: 9N, 2N, 8N (1939-1942). (Part No: 9N613) $1.72 [Enlarge Picture] Wobble Shaft Plate - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Replaces 81813626. (Part No: NCA859A) $90.77 [Enlarge Picture] Wobble Shaft Plate - For Models: 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: NCA859A) $90.77 [Enlarge Picture]   Implements AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, (Part No: BH1317) $9.90 [Enlarge Picture] AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, (Part No: 15622BH) $4.90 [Enlarge Picture] Axle spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $3.32 [Enlarge Picture] Axle spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $3.32 [Enlarge Picture] BLADE BOLT KIT - BLADE BOLT KIT for rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1\8-12 inch, B = 3 1\2 inch, C = 1 3\8 inch, D = 1 inch, E = 9\16 inch, F = 1\2 inch, G = 2 1\2 inch, H = 1.492 (for 1 1\2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607) $18.69 [Enlarge Picture] Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $2.49 [Enlarge Picture] Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $5.01 [Enlarge Picture] Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $5.01 [Enlarge Picture] CASTER ASSEMBLY - Tail wheel & hub assembly with grease fitting and fork assembly. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $146.70 [Enlarge Picture] CASTER ASSY, OLD STYLE - Tail wheel & hub assembly with grease fitting. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $98.26 [Enlarge Picture] CASTER ASSY, OLD STYLE - Tail wheel & hub assembly with grease fitting. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $98.26 [Enlarge Picture] Caster Fork Assy - New Style Fork style assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). Vertical shaft is 1.5 inches O.D., 8 inches in length. Fork spread is 6 inches. (Part No: 12528) $66.48 [Enlarge Picture] Caster Fork Assy - New Style Fork style assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). Vertical shaft is 1.5 inches O.D., 8 inches in length. Fork spread is 6 inches. (Part No: 12528) $66.48 [Enlarge Picture] HUB ASSY - Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 w new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $32.89 [Enlarge Picture] HUB ASSY - Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 w new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $32.89 [Enlarge Picture] HUB W/BRG CUPS - 4-bolt, 5" bolt circle & 3-5 8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $35.90 [Enlarge Picture] Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $4.99 [Enlarge Picture] TAIL WHEEL ASSY - 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $47.67 [Enlarge Picture] TAIL WHEEL ASSY - 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $47.67 [Enlarge Picture] TAIL WHEEL ASSY W/LAM TIRE - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $132.57 [Enlarge Picture] TAIL WHEEL ASSY W/LAM TIRE - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $132.57 [Enlarge Picture]   Lights Bracket - Bracket, headlight switch to dash. For tractors: 8N {1948-1950}. (Part No: 8N11671) $5.59 [Enlarge Picture] Bracket - Headlight bracket reinforcement, clear zinc plated for ROUND headlight bracket. For tractors: 8N, NAA {1949-1954}. (Part No: 8N13102) $5.59 [Enlarge Picture] Bracket - Headlight bracket reinforcement, clear zinc plated for WINGED headlight bracket. For tractors: 9N, 2n, 8n {1939-1949}. (Part No: 9N13102) $10.16 [Enlarge Picture] Clip - Clip, {rear lamp wire to brake actuating shaft} 2 required. For tractors: 8N, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N14565) $8.51 [Enlarge Picture] Clip Set - Set of 7 - Clip, headlight wiring to hood. Set of 7. For tractors: 9N, 2N, 8N {1939-1952}. Replaces OEM # 358297S32. 7 Required per tractor. (Part No: 358297S7) $8.28 [Enlarge Picture] Dash Light, 12 Volt - For Models: (530, 630 upper dash lamp), (620 excluding Orchard), (720 electric start), (730 electric start, upper dash lamp). Replaces AR2051R, AF3139R. (Part No: AR20466R) $29.92 Dash Panel Lights Pair - Pair of Red and Green buttons for Dexta and Super Dexta.Replaces Oem E203NE9, and E204NE9. (Part No: S.67922) $29.00 [Enlarge Picture] Fender Light Assembly - Works on either Right or Left hand side. Fits Fordson Major, Power Major, Super Major. (Part No: E1ADKN13202B) $114.27 [Enlarge Picture] Fender Light Assembly, LH - SINGLE light fits left hand side. Fits Dexta, Super Dexta. (Part No: D2NN13N201A) $45.11 [Enlarge Picture] Fender Light Assembly, RH - SINGLE light fits right hand side. Fits Dexta, Super Dexta. (Part No: D2NN13N200A) $43.13 [Enlarge Picture] HEADLIGHT - 12 VOLT - 12 Volt, 5-3 4" dia., sealed beam bulb. Fits 9N, 2N, 8N, Complete assembly is a copy of original headlight, IS NOT EXACTLY LIKE ORIGINAL. Single unit Replaces 13005C or 13006C assemblies (RH or LH). (Part No: S.66419) $45.00 [Enlarge Picture] HEADLIGHT SET - 12 VOLT - For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V) $152.30 [Enlarge Picture] HEADLIGHT SET - 6V - EXACTLY like original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. Spare sealed beam bulbs available as p n L4019. (Part No: 2N13005-6V) $149.90 [Enlarge Picture] Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $40.56 [Enlarge Picture] Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $40.56 [Enlarge Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, gray - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HG-12V) $29.00 [Enlarge Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HB-12V) $29.00 [Enlarge Picture] Headlamp Assembly, 12 Volt, Blue - (Single) 12-volt, metal body & bezel, blue enamel finish, 5-3 4" diameter for the following tractors: NAA, Jubilee, 501, 600, 601, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068) $56.47 [Enlarge Picture] Headlamp Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish.For Models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 310066F) $49.90 [Enlarge Picture] Headlight & Cowl Assembly, LH - Comes with H4 halogen bulb. For Models: 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 7610, 230A, 334, 335, 530A. (Part No: S.66212) $27.72 Headlight & Cowl Assembly, RH - Comes with H4 halogen bulb. For Models: 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 7610, 230A, 334, 335, 530A. (Part No: S.66213) $27.72 [Enlarge Picture] Headlight Assembly w/ Bulb - For Models: 5640, 6640, 7740, 7840, 8240. (Part No: F0NN13005AB) $39.04 Headlight Assembly, Inset In Grill - Fits Dexta, Super Dexta. Also replaces 957E13200B. Mounts in grill. (Part No: D2NN13005D) $30.24 [Enlarge Picture] Headlight Bracket - ROUND right or left side. For Models: 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472) $8.82 [Enlarge Picture] Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Part No: FAA13102A) $3.15 [Enlarge Picture] Headlight Rim - Headlight rim, grey finish. Ring W Bolt For 310066 (6 Volt) & 310068 (12 Volt) 5 7 8" Diameter Light Units. For 2000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 501, 5600, 5700, 600, 601, 6600, 6700, 700, 701, 7600, 7700, 800, 801, 900, 901, NAA, (Part No: C0NN13045B) $16.41 [Enlarge Picture] Headlight Switch - For 2000, 3000, 4000, 5000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 7600, all 1975-1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981-8 1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981-8 1985, 7910, 8210, both 1983-8 1985. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. Headlight Switch and nut (Part No: 251405) $23.27 [Enlarge Picture] Headlight, 12 Volt - Less glare guard, fender mounted. For Models: 4200, 5200, 7200 Row crop. (Part No: D4NN13002C) $29.92 [Enlarge Picture] Headlight, 12 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67893) $42.39 [Enlarge Picture] Headlight, 6 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67892) $42.39 [Enlarge Picture] Headlight, 6 Volt, LH - Left Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13006C) $41.81 [Enlarge Picture] Headlight, 6 Volt, RH - Right Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13005C) $41.81 [Enlarge Picture] Headlight, Side Mount, LH - Left Hand side. Fits Dexta, Fordson Major, Power Major. (Part No: 957E13003) $29.99 [Enlarge Picture] Headlight, Side Mount, RH - Right Hand side. Fits Dexta, Fordson Major, Power Major. (Part No: 957E13002) $29.99 [Enlarge Picture] Knob, Light Switch - Aluminum. For Models: 9N, 2N, 8N, NAA, Jubilee. (Part No: 9N9703) $6.50 [Enlarge Picture] Light Rim - Head light door assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. (Part No: 2N13043) $25.30 [Enlarge Picture] Light Rim - Rim, worklight bulb retainer, OD 5-1 4", ID 4". For Models: 8N, NAA, {1949-1954}. (Part No: 8N15513) $25.30 [Enlarge Picture] Light Rim CHROME - For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. Replaces 2N13043. (Part No: S.67891) $17.01 Light Switch - Switch with nut. For 2000, 4000, 600, 700, 800, 900, 601, 701, 801, 901 (Part No: FDN11654A) $9.28 [Enlarge Picture] Light Switch - For Models: 9N, 2N, 8N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B) $13.60 [Enlarge Picture] Light Switch w/ Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $26.66 [Enlarge Picture] Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $29.88 [Enlarge Picture] Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $29.88 [Enlarge Picture] Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $56.70 [Enlarge Picture] Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $56.70 [Enlarge Picture] Rear Fender Light, LH - Fits Fordson Major, Power Major, Super Major. Fits LEFT hand side. (Part No: E1ADKN13405B) $80.86 [Enlarge Picture] Rear Fender Light, RH - Fits Fordson Major, Power Major, Super Major. Fits RIGHT hand side. (Part No: E1ADKN13404B) $75.89 [Enlarge Picture] Retainer 3 Per PGK - Clips, worklight bulb to rim retainer. Set of 3 {special clip to hold bulb assembly in rim}. For tractors: 8N, NAA {1949-1954}. (Part No: 8N15534) $6.72 [Enlarge Picture] STROBE LIGHT - 4 IN AMBER DUAL FLASH. PrecoStrobe lighting safety lights. Magnetic mount, double flash, amber lens color. 80 double flashes per minute, 12 - 24 volt systems. Height: 4.649" (118mm). Width: 6.400" (163mm). (Part No: SL3416AD) $139.90 [Enlarge Picture] Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1 4 dia., 3 8Dia by 5 8 mounting Stud.Does not include Flasher. (Part No: S.61357) $10.27 [Enlarge Picture] Sealed Beam Bulb - 12 Volt, 3 Lug Terminal Type. 4-1 2" dia. bulb. (Part No: D6NN13N007A) $25.50 [Enlarge Picture] Sealed Beam Bulb, 4-1/2", Red Backed - Red white combination work tail light, 4-1 2" diameter. (Part No: S.52670) $9.90 Sealed Beam Bulb, 5-3/4", Red Backed - Red white combination work tail light, 5-3 4" diameter. For Models: 5500, 5550, 6500, 650, 7500, 750, 755, 755A, 755B. (Part No: C5NN13N424A) $18.28 Switch, Headlamp - Assembly with pigtail wire connectors. EXACT OF ORIGINAL. For Models: 9N, 2N, 8N (1939-1949). (Part No: 9N11652) $23.01 [Enlarge Picture] Switch, Light - Switch, Worklight. For Models: 8N, NAA (1949-1954). (Part No: 8N13740) $21.04 [Enlarge Picture] Tail Light & Turn Assembly, LH - For Models w Cabs: 5610, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW35. Replaces E4NN13N510AA, E4NN13N510AB, E4NN13N465AB, E4NN13N465AA. (Part No: S.56285) $28.20 Tail Light & Turn Assembly, RH - For Models w Cabs: 5610, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW35. Replaces E4NN13N510AA, E4NN13N510AB, E4NN13N465AB, E4NN13N465AA. (Part No: S.56286) $28.20 Tail Light Assembly - Exact as Original in Every Detail. Ford Duolamp (stamped in tailight housing) tractors: 9N, 2N, 8N (1939-1952) (Part No: 8N13404) $49.67 [Enlarge Picture] Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee , also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: FAA13402A) $35.85 [Enlarge Picture] Tail Light Fender Bracket - FOR 9N, 2N, 8N (1939-1952). Left side. (Part No: 9N13471) $27.28 [Enlarge Picture] Tail Light Fender Bracket - Fits 9n, 2n, 8n, (1939-1952). Right side (Part No: 9N13470) $27.28 [Enlarge Picture] Tail Light Lens - Plastic 4 in. lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3in. apart). Fits tractors 1953 & newer. (Part No: FDV13450A) $11.26 [Enlarge Picture] Tail Light Wire Clip - For 2N, 8N, 9N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668) $2.39 [Enlarge Picture] Tail Lite, License Light, Clear Glass Lens - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: 9N13445) $12.50 [Enlarge Picture] Tail Lite, License Light, Lens Gasket - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: FAA13447A) $4.85 [Enlarge Picture] Tailight Assembly - DUOLAMP tailight & bracket assembly with FOMOCO lens (plastic). For the following tractors (1955 to 1957): 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA13402A) $60.55 [Enlarge Picture] Taillight Mounting Bracket - Exact of original. Mfg in USA. For tractors with Taurus taillight: 9N, 2N (1939-1948) (Part No: 9N13423) $16.88 [Enlarge Picture] Taillight Mounting Bracket - Exact of original. Mfg in USA. (Goes between tailight and fender bracket - mounting on top of 9N13470 or 9N13471.)For DUOLAMP tractors 9N, 2N, 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 1811, (2000, 4000 4-cyl), 1801 series. (1949-1954) (Part No: 8N13423) $18.66 [Enlarge Picture] Winged Headlight Bracket - Right Side. For Tractors: 9N, 2N, 8N, NAA. (Part No: 9N13472) $29.46 [Enlarge Picture] Winged Headlight Bracket - Left Side. For Tractors: 9N, 2N, 8N, NAA. (Part No: 9N13473) $29.46 [Enlarge Picture] Work Light Assembly - 12 Volt - Worklight assembly, 12-volt seal beam with on off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-12V) $88.23 [Enlarge Picture] Work Light Assembly - 6 Volt - Worklight assembly, 6-volt seal beam with on off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-6V) $88.23 [Enlarge Picture] Work Light Assembly, OEM 6 Volt - Like original worklight assembly with on off switch. Includes fender bracket spacer. Does not include fender bracket. For tractors: 2N, 8N {1947-1951}. (Part No: 8N15500E) $117.65 [Enlarge Picture] Worklight - Side mount, 6" x 3-3 4", does NOT include halogen bulb. For Models: 5610, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, (TW35 up to 3 1988). (Part No: E5NN15R557AA) $47.02 Worklight 12 Volt - Red 12 Volt worklight with handle, on off switch, swivels and rotates. (Part No: S.42792) $29.99 [Enlarge Picture] Worklight 12 Volt Black - 12 Volt worklight with handle, on\off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $29.99 [Enlarge Picture] Worklight Bulb, 6 Volt - Worklight bulb assembly, CLEAR lens. M.F.G. in U.S.A. For tractors: Early 8N {1949-1951}. (Part No: 8N15514E) $44.80 [Enlarge Picture] Worklight Bulb, 6 Volt - Worklight bulb assembly, FROSTED lens w rings. M.F.G. in U.S.A. For tractors: Late 8N, NAA, {1951-1954}. (Part No: 8N15514L) $44.80 [Enlarge Picture] Worklight Kit, 6 Volt, Chrome - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For Models: 2N, 9N, 8N, NAA, 600, 800. (Part No: S.43377) $62.70 [Enlarge Picture]   Miscellaneous Cab Foam Kit - 8-Piece Black. For Models: 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Tool Box on Left Fender (Part No: R3237) $327.67 Cab Foam Kit - 8-Piece Blue. For Models: 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Tool Box on Left Fender (Part No: R3238) $327.67 Cab Foam Kit - With Headliner, Post Kit & Dash 15-Piece - Black For 8600, 9600 (Part No: R1261) $494.58 Cab Foam Kit - With Headliner, Post Kit & Dash 15-Piece - Blue For 8600, 9600 (Part No: R3239) $494.58 Cab Headliner - 1-Piece Blue. For Models: 6700, 8700, 9700, TW10, TW20, TW30. (Part No: R3254) $320.02 CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $335.61 [Enlarge Picture] CabCAM Video System - Includes 5.5 Black & White CRT Monitor, Black & White Camera, Cigarette Lighter Adapter, DC Adapters. Weatherproof Black & White Camera.Infrared Illuminators allow up to 32 ft of night vi sibility, made to withstand off-road conditions, audio capabilities.CRT Black & White Monitor.High resolutionmonitor. Features POWER button, contrast knob, brightness knob, volume knob, channel 1 & 2 camera button, mode (auto\manual), day\night brightness button, manual mirroring switch for two cameras, loudspeaker, external speaker jack, audio\video output. This system can be wired to automatically display camera CH1 on screen when triggered by another circuit. The day\night auto brightness option can also be wired to be triggered by a lamp switch. Adjustable Mounting Bracket , Anti-V ibration Pad, Weatherproof Video Cables, Cigarette Lighter Adapter, DC Adaptor. This system can be expanded to support up to two cameras. Color cameras are compatible, but still display black & white on screen. (Part No: CC55BW) $158.00 [Enlarge Picture] CabCAM Video System, Quad - (Includes 7" Monitor and 2 Cameras)``Includes 2 Waterproof Cameras. CCD Color with Audio, 18 Infrared Illuminators Allow up to 16 feet of Visibility in Dark, Image Mirroring Function, Made to Withstand Off-Road Conditions.7" LCD Color Quad Monitor Is Able To Show 4 Camera Views At One Time. Control Box For Direct Power Input For Cameras, AV1, AV2, AV3 & AV4 Video Inputs Allow Hook-up To Four Cameras. Color LCD Screen, Menu Button, DVD Input, Loudspeaker.Power Supply Cord. Plug AV Conversion Cable In The Front To Play A DVD. The Main Harness Has RCA Output Jacks To Hook To Larger Screen (TV) Or A Recording Device. AV Conversion Cable, Swivel Mounting Bracket W Mounting Pad, Stationary Mounting Bracket W Thumb Screws, 22 Pin Harness, Remote Control, Cigarette Lighter Power Adapter. NOTE:Total Camera Power Usage Cannot Exceed 1200mA. CAM87 Cameras Included In This Kit Use 300mA @ Full Power. Please Check Camera Max Power Consumption Before Adding Additional Cameras. (Part No: CC7M2CQ) $618.00 [Enlarge Picture] CabCAM Video System, Rear View - (Includes 7" Mirror Monitor and 1 Camera). Kit Contains: 1 - 7" Color TFT LCD Mirror Monitor, 1 Camera, 1 - PVC20 - 20' Cord, 1 - PVC65 - 65' Cord.1 Weatherproof Color Camera: Infrared illuminators allow up to 16 ft of night visibility , made to withstand off-road conditions. Comes with angle adjusting rings. Requires 32mm hole saw to install. Requires secondary power source. 7" TFT LCD Widescreen Color Mirror Monitor: Built-in touch buttons. MENU includes brightness, cont rast, color, tint & mode Dual video input for cameras and sensors. No audio. Easily clips onto ori ginal mirror. Remote control, 2 DC Adaptors, 65' & 20' Weatherproof Video Cables, Camera Adaptor Cab le for 4 Pin Camera. This system can be expanded to support up to two cameras. (Part No: RVM7) $349.23 [Enlarge Picture] CabCAM Video System, Wireless - Includes 5.6" Monitor and 2 Cameras. 200 yd barrier-free Transmission range.Wide-Angle Color Camera.Monitor with antenna.Four camera capability 2.4GHz wireless receiver.The monitor includes power indicator, remote receiving window, MENU button, channel selection, loudspeaker, support attaching slot and power supply terminal.Weatherproof Color Camera.One Channel 3 and one Channel 4 camera.Infrared Illuminat ors allow up to 32 feet of night visibility, image mirroring function, made to withstand off-road co nditions, audio capabilities.Each camera has an antenna and a power supply jack.Require 12V power source.Base-Mounted Remote Antenna with 9.75' cord, Ball Swivel Mounting Bracket with Mountin g Pad, U-Support Mounting Bracket with Thumb Screws, 6 Pin Power Wire Harness with Jack for AC Cigarette Lighter DC Adaptor, AC Power Adaptor, RCA Cable, Full-Featured Remote Control.This system can be expanded to support up to four cameras. (Part No: WL56M2C) $503.23 [Enlarge Picture] CabCAM Video System, Wireless - (Includes 5.6 Monitor and 3 Cameras)``Contains: Wireless Color Monitor W\Antenna, Wireless Camera W\ Antenna, 2 Wireless Side Mount Cameras W\Antennas, Cigarette Lighter Adapter, DC Wire Adapters .Weatherproof Color Camera W\Infrared Illuminators allow up to 32 ft of night visibility, made to withstand off-road conditions, audio capabilities.LCD Wide-Angle Color MonitorHigh resolution with antenna. Four camera capability.2.4GHz wireless receiver with four channels. One video and one audio RCA output. Supports 12V automotive battery.Image may be adjusted for horizontal and vertical mirror The monitor can automatically switch to right, left, or back-up camera views when wired into lamp circuits. This system can be expanded to support up to four cameras. (Part No: WLSV115) $525.00 [Enlarge Picture] Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $402.16 [Enlarge Picture] Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $90.46 [Enlarge Picture] Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $53.79 Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $77.88 Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $292.51 [Enlarge Picture] Deluxe Canopy, 3 Bow - Red. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $212.68 [Enlarge Picture] Deluxe Canopy, 3 Bow - Yellow. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100Y) $212.68 [Enlarge Picture] Deluxe Canopy, 3 Bow - Blue. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100B) $212.68 [Enlarge Picture] Deluxe Canopy, 5 Bow - Red. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504R) $239.61 [Enlarge Picture] Deluxe Canopy, 5 Bow - Yellow. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504Y) $222.64 [Enlarge Picture] Deluxe Canopy, 5 Bow - Blue. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504B) $222.64 [Enlarge Picture] Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $145.07 [Enlarge Picture] Engine Block Heater, Perkins - 600 watt heater with adaptor and one foot cord. Fits Perkins Engines 3.152 with 1-1 4" core plug. (Part No: S.42752) $40.92 [Enlarge Picture] Floor Mat Kit - For 6700, 7700, 8700, 9700 (Part No: R3253) $78.09 Grease Gun - 3-way fill cartridge gun. (Part No: C3NN17125A) $23.06 [Enlarge Picture] HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $23.48 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: 9N, 2N, 8N. (Part No: 1212406) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: 700, 740, 750, 900, 950, 960, (2000, 4000 series row crop to 1964). (Part No: 1212414) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, (2000, 4000 thru 1964). (Part No: 1212422) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: (2000, 2600, 3000, 3600 all 1965 and later). (Part No: 1212679) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: 4000, 4100 all purpose utility, 4600 std utility gas or diesel 1965 and later. (Part No: 1212687) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Model: 5000 all purpose 1965 thru 1967 w shell fenders. (Part No: 1212760) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: 5000, 5600, 6600 diesel 1968 and later. (Part No: 1212877) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Model: 7000 row crop diesel 1972 and later. (Part No: 1213081) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: 8000, 8600, 9000, 9600 row crop diesel 1968 or later. (Part No: 1212885) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: (NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840 w loader, backhoe). (Part No: 1411235) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Model: 4400 w loadere 1968 and later. (Part No: 1426235) $306.02 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Model: 4500 w loader and backhoe. (Part No: 1427235) $299.95 [Enlarge Picture] Historical Tractor Photographs - These beautiful black & White photo reproductions are of 1920's and 1930's Fordson tractors. Set of 7 photos (12in x18in.). These are good semi-glossy prints suitable for framing. (Part No: S.22993) $39.95 [Enlarge Picture] Historical Tractor Photographs - These beautiful black & White photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 16 photos (12in x18in.). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22994) $69.95 [Enlarge Picture] Historical Tractor Photographs - These beautiful black & White photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 5 photos (12in x18in.). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22093) $28.88 [Enlarge Picture] Hose 30 Inch - Hose, 30". For 5900, (Part No: HV4897) $27.58 [Enlarge Picture] Hose 40 Inch - Hose, 40". For 5900, (Part No: HV4898) $30.00 [Enlarge Picture] Shaft - Shaft with pinion gear. Length 14-5 8", thread 13 16"-12. For Models: 3900, 4100, 4110, 420, 4600, 4610, 515, 532, 535. (Part No: E2NN579AA) $32.10 [Enlarge Picture] Spring - Feathering spring, heavy duty, .243" thick. For 5000, 7000, (Part No: C9NNP733A) $42.17 Spring - Feathering spring, standard, .165" thick. For Models: 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810S. (Part No: D3NNP733A) $29.02 Surveillance System Wall Mount - (Includes Wall Mount Camera W AC Adapter, 4 Camera USB Adapter, 65' Cable) Kit includes waterproof sony color camera with manual zoom and focus, Infrared illuminators allowing up to 100ft of night vision, 1 USB DVR conversion box, 1 AC Adapter, 65 foot cable, and software.Supports up to 4 cameras. (Part No: SSW641) $254.75 [Enlarge Picture] Surveillance System With Dome Camera - Kit includes 1 waterproof Sony color camera with infrared illuminators allowing 100ft of night vision, 1 USB\DVR conversion box, 1 ac adapter, 1 65 foot cable, and software.Supports up to 4 cameras. (Part No: SSD765) $219.00 [Enlarge Picture] Thermostart Plug - Intake manifold heater. For Models: 230A, 234, 250C, 260C, 2610, 2810, 2910, 3430, 345C D, 3610, 3910, 3930, 4110, 445 A C D, 4610, 4630, 545 A C D, 5610, 6610, 6710, 7610, 7710, 7810, L783, L785, 3230, 4130AP, 4830, 5030, 5640, 6640, 7010, 7740, 7840, 8010, 8240, 8340, L865, L885, LX865, LX885, 334, 335, 550, 2310N, 530A, 5110, 6810, 8160, 8260, 836, 856. (Part No: 87800843) $34.41 [Enlarge Picture] Tractor Cover - Fits 9N, 2N, 8N. VERY Heavy duty canvas type. Burgundy colored. No Logos. (Part No: S.60175) $135.92 Video Borescope, 5.5mm Probe Diameter, 2.4 - KIt includes 2.4" TFT LCD Color Monitor, 5.5 mm Probe, operates 8 hours on 4 AA batteries(Batteries Included).Comes In A Durable, Black Carrying Case. Has Video Output to View On TV Monitor.Useful For Inspection & Observation In Areas Not Visible By Human Eye. (Part No: PVB2455) $485.00 [Enlarge Picture] Video Borescope, 7mm Probe Diameter, 2.5 - KIt includes 2.5" Color Monitor , 39" video cable, 7mm Diameter Lighted Probe , Comes In A Durable, Black Carrying Case. Insertion Tube Resistant To Water, Oil & Weak Acid.Operates Over 3 Hours With 3 AA Batteries (Batteries Are Included) .Useful For Inspection & Observation In Areas Not Visible By Human Eye. (Part No: VB25) $495.00 [Enlarge Picture]   Oil System Dipstick, Engine Oil - Length is approx 7-3 8in. from the base of cap to end. For Models: 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3190, 3300, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 5500, 650, 6500, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B. (Part No: C5NE6750D) $9.99 [Enlarge Picture] Dipstick, Engine Oil - For Models: 445, 445A, 450, 455, 455C, 455D, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, (6410, 6810, 7410 prior to 12 1988), 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6700, 6710, 675D, 675E, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 8000, 8200, 8400, 8600, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: 83982499) $9.22 Engine Oil Dipstick - For Models: 2N, 8N, 9N. (Part No: B2NN6750A) $3.68 [Enlarge Picture] Engine Oil Pump - For Model: 8100 with 380 engine. (Part No: 86100762) $116.00 [Enlarge Picture] Engine Oil Pump - Fits: 555E, 5610S, 5640, 575E, 655, 6610S, 6640, 66400, 675E, 6810S, 7010, 7610S, 7740, 7740O, 9030E, LB110, LB115, LB90, LS190, LX985, TB100, TB110, TS100, TS90. (Part No: 81868537) $104.17 [Enlarge Picture] Filter Adapter, Spin-On - w Seal. Fits 2000, 3000, 4000, 5000 (Tractors from 1965 to 10 1969). For use with Spin On Filter E7NN6714AA. (Part No: 309825) $29.90 [Enlarge Picture] Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, 600, 700, 800, 900, 2000, 4000. (Part No: EAF6866A) $4.25 [Enlarge Picture] Knob - 3 8" UNF x 24 tpi. For Models: Major, Power Major. (Part No: EBB7213) $4.99 [Enlarge Picture] Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries.````Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $11.50 [Enlarge Picture] Oil Dip Stick Tube - For 2N, 9N, 8N. Engine Oil level Dip Stick Tube. Replaces EBP6784A. (Part No: 8N6784) $5.42 [Enlarge Picture] Oil Dipstick - Engine oil level. For Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6750B) $6.80 Oil FIlter, Spin On - For Models: 2000, 2100, 2300. (Part No: 18A303) $7.28 Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A) $3.22 [Enlarge Picture] Oil Filler Cap - For Models: 2600, 2610, 3600, 3610, 4100, 4110, 4600, 4610, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700. (Part No: D5NN6N609A) $15.08 [Enlarge Picture] Oil Filler Cap - Cap, oil filler. For 2000, 3000, 4000, 5000, 7000 (Part No: D0NN6766A) $7.24 [Enlarge Picture] Oil Filler Cap - Replaces 83907851 & D5NN6N609A. Fits: ALL 3, 4, 6 Cylinder Models that are 1975 and NEWER, Including:2600, 23102610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4600, 4610, 4630, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Part No: 83907851) $11.90 [Enlarge Picture] Oil Filler Cap - Oil filler breather cap. For tractors: 9N, 2N, 8N (1939-1950). Overall length is 3 5 8, 1 1 4 diameter tube and tube is 1 3 8 long. (Part No: 9N6766) $27.28 [Enlarge Picture] Oil Filler Cap with Element - For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, ``801, 811, 821, 841, 851, 861, 871, 881, ``900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Also replaces OEM 8N6766B. (Part No: 310030) $10.95 [Enlarge Picture] Oil Filter - Engine oil filter, cartridge element, 2 quart. For 3, 4 & 6 cylinder engines (1965 to 1979) on: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20 (Part No: DGPN6731A) $12.40 [Enlarge Picture] Oil Filter - Engine oil filter, spin-on element, 1 quart, 3-3\4 x 5. For turbo diesels. For 555C, 655C, 7000, 7600, 7610, 7700, 7710 (Part No: E8NN6714BA) $13.10 [Enlarge Picture] Oil Filter - Engine oil filter, spin-on, 4 length. For (5500 or 5550 gas or diesel), 5600, 6600, 6700. (Part No: C5NN6714B) $10.38 [Enlarge Picture] Oil Filter - 5.842" tall, 2.950" OD. For Models: (1000, 1600 w 2 cylinder engine), 1100, 1200, 1300, 1500, 1700, 1710, 1900, 1910. (Part No: E1NN6714BB) $9.27 Oil Filter - Filter element & gasket for tractors: 9N, 2N, 8N (1939-1952). (Part No: APN6731B) $10.56 [Enlarge Picture] Oil Filter - Cartridge Type. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965. Comes with gasket. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. (Part No: CPN6731B) $9.28 [Enlarge Picture] Oil Filter - Spin-On Type. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600, 2610, 3610, 4610, 5610, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA) $6.82 [Enlarge Picture] Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 all from 1953 to 1964 w 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. (Part No: CPN6882A) $29.19 [Enlarge Picture] Oil Filter Cartridge Type W/Gasket - For Models Dexta, Super Dexta, Power Major, Super Major(1959-1964). This filter is (4 1 2 by 2 3 4 DIA). Replaces EPN6731B, 957E6731. (Part No: S.40537) $6.12 [Enlarge Picture] Oil Filter Cartridge Type W/Gasket - For models Fordson Major, Power Major(52-58).This Filter is (6 by 2 3 4 dia.). Replaces EPN6731A. (Part No: S.40535) $13.08 [Enlarge Picture] Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For Models: 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A) $2.95 [Enlarge Picture] Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For Models: 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A) $2.95 [Enlarge Picture] Oil Filter Spin On Type - For models 7000, 7600, 7700, 7610, 7710, (IND. 4 CYL W Turbo).Replaces D5NN6714A, 86546609. (Part No: S.40539) $10.20 [Enlarge Picture] Oil Filter, spin on - Used with Spin On Oil Filter Adapter Kit # S.40533. (Part No: S.40536) $6.50 Oil Filter-Tripac - Tri-pac of oil filter elements. 3 cartridge type (APN6731B) Filters. For 2N, 8N, 9N. (Part No: APN18649B) $17.99 [Enlarge Picture] Oil Filters, Tri Pack - Three pack of cartridge Type oil filters. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. Comes with gasket. (Part No: CPN6731BTRIPACK) $23.84 [Enlarge Picture] Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG) $13.14 [Enlarge Picture] Oil Pick Up Tube - For Models: 2N, 8N, 9N. (Part No: 8N6615) $47.95 [Enlarge Picture] Oil Pressure Switch - For Models: (Dexta, Super Dexta from 1957 to 12 1958). (Part No: 100E9278) $12.00 [Enlarge Picture] Oil Pressure Switch - For Models: (Dexta, Super Dexta from 12 1958 to 1964), Major, Power Major, Super Major. (Part No: E1ADDN9278) $14.97 [Enlarge Picture] Oil Pressure Switch - For Models: 3830, 4030, 4230, 4330, 5530, 6530, 4835, 5635, 6635, TL70, TL80, TL90, TL100. Replaces 5160694. (Part No: 4998770) $10.96 [Enlarge Picture] Oil Pressure Switch - For Models: 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD) $5.10 [Enlarge Picture] Oil Pressure Switch - For Models: 5030, 8530, 8630, 8730, 8830, 5640, 6640, 7740, 7840, 8240, 8340, 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3400, 3500, 4110LCG, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555E, 655, 655A, 655C, 655D. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD) $5.10 [Enlarge Picture] Oil Pressure Switch - For Models: 655E, 755, TW5, TW10, TW15, TW20, TW25, TW30, TS90, TS100, TS110. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD) $5.10 [Enlarge Picture] Oil Pump - Oil pump. For Models: 4630, 5030, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: E1NN6600CC) $117.11 [Enlarge Picture] Oil Pump - Oil pump. For Models: 8000, 8200, 8600, 9000, 9200, 9600, 9700. (Part No: E2NN6600AC) $174.19 [Enlarge Picture] Oil Pump - Oil pump replaces 528E6600. Fits Major & Super Major built from 4 1957 to 12 1964. (Part No: 82847515) $133.45 [Enlarge Picture] Oil Pump - For Models: 2110, CL45, CL55, CL65. (Part No: SBA140016090) $107.42 [Enlarge Picture] Oil Pump - For 144 152 Diesel engine in Dexta, Super Dexta. Replaces 36386632M91, 1641076M91. (Part No: 41314078) $66.29 [Enlarge Picture] Oil Pump - For 6610, 7610 (From 9 1981), 7000, 7100, 7200 (From 10 1971), 7600(1975-1981), 7600C (1975-9 1976), 7610 (From 9 1981), 7700 (1975-1981), 7710 (From 9 1981) (Part No: OP1121) $79.90 [Enlarge Picture] Oil Pump - For Models: 8000, 9000 (1968-7 1976), 9700 (1968-1978) with 6-Cylinder Diesel Engine. (Part No: OP1123) $202.72 [Enlarge Picture] Oil Pump - For Model: 8700 (8 1976-1978). (Part No: OP1122) $192.85 Oil Pump - For Models: TW10, TW20, TW30 (1979-1982), TW15, TW25, TW35 (1983-2 1990), 8630, 8730, 8830 (From 3 1990) with 6-Cylinder Diesel Engine s (Part No: OP1722) $591.45 [Enlarge Picture] Oil Pump Body - For Models: 9N, 2N & 8N to S N 247571. For pumps with 9 16 inch gear width. Pump body assembly does not include gears. (Part No: 9N6603) $109.71 [Enlarge Picture] Oil Pump Body - For 8N after S N 247571. For pumps with 3 4 inch gear width. Pump body assembly does not include gears. (Part No: 8N6603) $105.08 [Enlarge Picture] Oil Pump Bushing - Fits 9N, 2N, 8N. ``***Minimum order QTY is 5*** (Part No: 9N6612A) $3.76 [Enlarge Picture] Oil Pump Gasket - For 9N, 2N, 8N.``***Min order qty is 10*** (Part No: 9N6619) $.59 [Enlarge Picture] Oil Pump Gear - Gear, oil pump driven, width 9\16. For Models: 2N, 8N, 9N. (Part No: 52-6610B) $13.27 [Enlarge Picture] Oil Pump Gear - Gear, oil pump drive, width 9\16. For Models: 2N, 8N, 9N. (Part No: 52-6614B) $21.78 [Enlarge Picture] Oil Pump Gear - Gear, oil pump driven. For Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: EAA6614B) $26.64 [Enlarge Picture] Oil Pump Gear - For 2N, 8N, 9N. Oil Pump Large Gear with 1 1 2" shaft for oil pump body number 9N6603. (Part No: 9N6608A) $29.90 [Enlarge Picture] Oil Pump Gear & Shaft - Gear and shaft assy. For Models: NAA, Jubilee. (Part No: EAA6608C) $41.38 [Enlarge Picture] Oil Pump Gear, Drive - Gear, oil pump drive, gear width 3\4. For Model: 8N. (Part No: 8N6614) $54.45 [Enlarge Picture] Oil Pump Gear, Driven - Gear, oil pump driven, gear width 3\4. For Model: 8N. (Part No: 8N6610) $54.46 [Enlarge Picture] Oil Pump Kit - Complete kit, for gear type pump. Check unit before ordering to be certain it has not been converted to rotor type pump using kit C3AE6608B. For Models: 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: FPN6600A) $28.40 [Enlarge Picture] Oil Pump Kit - Complete oil pump repair kit for Ford 9N, 2N, 8N prior to serial# 247570 (1939-1948). For pumps with 9 16" gear WIDTH. Early & late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600A) $42.52 [Enlarge Picture] Oil Pump Kit - Complete oil pump repair kit for Ford , 8N serial# 247571 and up(1948-1952). For pumps with 3 4" gear WIDTH. Early & late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600B) $42.52 [Enlarge Picture] Oil Pump Kit, Rotor Type - Kit, oil pump shaft & rotor. For 4-cylinder GAS engine. For Models: 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, NAA, Jubilee. All with either 134 or 172 CID engines. (Part No: C3AE6608B) $43.99 [Enlarge Picture] Oil Pump Relief Plunger Spring - Oil Pump Relief Plunger Spring.``For Tractors: 9N, 2N, 8N (1939 to 1952). **must order in multiples of 4 units** Priced Each. (Part No: 9N6654) $1.82 [Enlarge Picture] Oil Pump Repair Kit - Oil pump repair kit for gear type pump. For Models: NAA, Jubilee with 134 CID engine. (Part No: CPN6600A) $41.74 [Enlarge Picture] Oil Pump Tool - A complete tool set with jig, punches and reamer. For Models: 2N, 8N, 9N. (Part No: OPT20) $95.97 [Enlarge Picture] Oil Pump for Dexta - For 144 CID, 3 cyl., dsl 1957-66 and 152 CID, 3 Cyl., dsl April 1962-64. Oil pump used on Dexta Tractor 1957-64. Repl. 957E6600B pump. When replacing #957E6600B oil pump, the following must also be replaced: 957E6613C & E99-CF9 pipes & 2 of 114048-ES nuts, not supplied by ATS, Inc. Note: Use two 5 8" inverted flare nuts and ferrules with 5 8" copper tubin cut and formed to fit for E990CF9 pipe and 114048-ES nuts. (Part No: 957E6600C) $61.25 [Enlarge Picture] Oil Pump gear - Gear and shaft assy. For Models: 600, 700, 800, 900. (Part No: EBP6608A) $24.12 [Enlarge Picture] Oil Pump w/screen - Complete oil pump assembly with lower screen.For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA. (Part No: E1NN6600DD) $84.85 [Enlarge Picture] Oil Pump, Hex Drive - For 134 CID 4-cylinder GAS engine in: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, (2000, 1962-64) Oil pump assembly, hex drive, cast iron rotor type. (M67B) Uses repair kit C3AE6608B. (Part No: C3NN6621A) $85.64 [Enlarge Picture] Oil Pump, Hex Drive - (Gear Type) For applications with hex drive shafts (Shaft not included). For 134 172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: EAE6621AB) $94.59 [Enlarge Picture] Oil Pump, Roto Type - For 144" or 172" DIESEL engine in tractor series: 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000, including HD industrial (1958 to 1964). Roto type oil pump hex drive. Replaces C3nn6621B. Will retrofit 134" or 172" gas engine if necessary conversion parts have been installed when changing from gear type to roto type pump. (Part No: D1NL6600A) $86.25 [Enlarge Picture] Oil Pump, Slotted Drive - Slotted Drive type for 134 CID gas engine in: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 2000 (<1964). Can also replace EAF6621B. (Part No: EAF6621D) $71.18 [Enlarge Picture] Oil Relief Valve Inlet Gasket - Must be ordered in quantities of 5, price is for 1. For Models: 9N, 2N, 8N. (Part No: 1GA6669) $.42 [Enlarge Picture] Oil Terminal Block - For Models: 2N, 9N from 1939-1947. (Part No: 9N6722) $13.90 [Enlarge Picture] Oil Terminal Block - Oil Gauge to Block Elbow. 1 4 inch taper pipe thread. For 8N, 1948-1952. (Part No: 8N6722) $9.24 [Enlarge Picture] Plunger - Plunger, oil pump relief valve. For tractors: 9N, 2N, 8N, (1939 to 1952). The Spring is available seperately as 9N6654, pack of 4. (Part No: 01A6663) $10.82 [Enlarge Picture] Pump Gear/Shaft Assembly - Gear & shaft assembly, oil pump drive. For 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700, NAA, (Part No: E9NN6A820AA) $44.25 [Enlarge Picture] Reamer - Replacement reamer for oil pump tool. For Models: 8N, 9N. (Part No: OPT20R) $55.80 [Enlarge Picture] Seal, Oil Filter Adapter - 2 quart to 1 quart spin on or use 309825. For Models: 2000, 3000, 4000, (5000 1965-10 1969). (Part No: D8NN6N818AA) $5.65 [Enlarge Picture] Spin-On Oil Filter Kit - (Convert Cartridge filter to new Spin-On filter). Includes: Head, Gasket & filter. Fits Dexta & Super Dexta. Uses filter part numbers 1447082M91 or S.40536. (Part No: S.40533) $27.60 [Enlarge Picture]   PTO / Driveline Arm, PTO Shifter - For 6 & 8 Speed transmission on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (w'Trans or live PTO) (Part No: C7NNN740A) $38.50 [Enlarge Picture] Bearing, PTO Shaft - Front PTO shaft bearing, 2 3 8 inches O.D. 1 3 16 I.D. 5 8 width. For 2N, 8N, 9N, NAA (1953-54), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. (Part No: 9N715BC) $5.31 [Enlarge Picture] Clutch Pack Assembly, Independent PTO - Includes 3 discs & 3 plates. For Models: 5000, 7000. (Part No: D5NNN751D) $270.27 Clutch Pack Assembly, Independent PTO - Includes 4 discs & 4 plates. For Models: 5000, 5600, 5900, 6600, 7000, 7600, 7700. (Part No: D2NNN751D) $274.42 Clutch Pack Assembly, Independent PTO - Includes 5 discs & 5 plates. For Models: 5610, 6610, 7610, 7810, 7910, 8210, 5640, 6640, 7740, (7840, 8240, 8340 2 spd shiftable), TS90, TS100, TS110. (Part No: E0NNN751BA) $282.74 [Enlarge Picture] Coupling, PTO Clutch - For 6 & 8 Speed transmission on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (w'Trans or live PTO). (Part No: C5NN717A) $92.68 [Enlarge Picture] DRIVELINE ASSY 4 SERIES - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1 2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1 16) bearing diameter x 74.6mm 2.940 (2-15 16). 1333mm (52-1 2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $149.90 [Enlarge Picture] DRIVELINE ASSY W/YOKES - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 6 spline Q.D. tractor yoke. 1-3 8 round bore with 1 2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16) overall length (43-3 4) . Verify length before ordering. (Part No: AB4111WY) $142.33 [Enlarge Picture] DRIVELINE ASSY W/YOKES - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8inch 6 spline Q.D. tractor yoke. 1-1 4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $159.90 [Enlarge Picture] DRIVELINE ASSY W/YOKES - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 - 6 spline Q.D. tractor yoke, 1-3 8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1 16) earing dia. x 74.6mm - 2.940 (2-15 16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $219.90 [Enlarge Picture] Fork, PTO Shifter - For 6 & 8 Speed transmission on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (w'Trans or live PTO) (Part No: C5NN720A) $45.36 [Enlarge Picture] Hub - Hub, PTO drive clutch, 25 teeth and 52 teeth. For 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, (Part No: F1NNN750AA) $120.65 [Enlarge Picture] Input Shaft, PTO - For Models: (2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 all 1965 and up w live PTO), (231, 233, 2600, 333, 3600, 531 all 1975 and up w live PTO)< (234, 2610, 334, 530A all 1981 and up w live PTO). (Part No: C5NN772A) $257.07 [Enlarge Picture] Live PTO Shifter Plate - For 6 & 8 Speed transmission, manual reverse on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A. (Part No: C7NN721A) $27.60 [Enlarge Picture] PRO Drive Shaft - For Models: TW10, TW20, TW30 all above 1979. Drive Shaft is 37.5" Long, 22 & 25 Splines. (Part No: D8NN7A684AB) $296.16 PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC) $0.00 PTO Brake Arm - For Models: 5000, 7000, 5600, 6600, 6700, 7600, 7700, 5610, 6610, 7610, 7710, 7810, 7910, 8210, 7740, 7840, 8240, 8340, 8670. (Part No: C9NNN747B) $27.66 [Enlarge Picture] PTO CAP - For Models: 9N, 8N, 2N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. NOT LIKE ORIGINAL. (Part No: 310088) $7.50 [Enlarge Picture] PTO Cap - Cap for all Ford Models 1939-64. Like original. 3 1 2 inches in length. (Part No: 310088-OEM) $18.95 PTO Clutch Disc - PTO disc, 8-1 2", 29-spline, 1-7 8" hub. For Models: (2000, 2100, 2110, 2120, 2150, 2310 3 cyl. dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12 1984 3 cyl. dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12 1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1 1965-12 1974), (335 utility 10 1975-9 1978), 3500, 3550, (3600 10 1975 and up), 3600N Narrow, (3610 10 1981-12 1984), 3910, 4600, 4600O, 4600SU, 530A. (Part No: C5NN77641B) $54.96 [Enlarge Picture] PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Part No: NAA70038C) $10.95 PTO Countershaft - 6 23 spline, 12.0625" long. For Models: (2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4110, 4330, 4340 all w Transmission PTO). (Part No: C5NN702A) $196.60 [Enlarge Picture] PTO Countershaft - 11 6 spline, 24.250" long. For Models: (2000, 3000, 4000 all w live PTO & 6 or 8 speed trans.) (Part No: C7NN702B) $180.97 [Enlarge Picture] PTO Disc - 9.062" included w pressure plate, rigid disc, organic, 1.875" spline dia., 29 spline. For Models: 600, 800, 900, Super Dexta.(refundable $20 core charge). (Part No: 323033516) $97.61 [Enlarge Picture] PTO Disc, Re Manufactured - 9" Organic, solid, included w pressure plate, 1.875" spline dia., 29 spline. For Models: 2000, 4000 (62-64), 600, 700, 800, 900, Dexta. ( Refundable $20 core charge). (Part No: E8NN7550LA-RO) $50.82 [Enlarge Picture] PTO Drive Plate - Drive Plate, 15 spline, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, (Part No: C5NNN777A) $69.66 [Enlarge Picture] PTO Drive Shaft - Shaft, 15 teeth, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C5NN7A684AA) $179.96 [Enlarge Picture] PTO Drive Shaft - PTO Drive Shaft - Shaft, 20 teeth, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: E4NN7A684AA) $220.00 [Enlarge Picture] PTO Drive Shaft - PTO Drive Shaft 22 spline. For models (5610, 6610 11 91-> 8 speed Non synchro), 5610S, 6610S, 7610S, 7810S, 7010, 8010, (5640, 6640, 7740, 7840, 8240, 8x2 OR 16x4 Ttans), TB80, TB85, TB90. (Part No: E9NN7A684AA) $206.46 [Enlarge Picture] PTO Drive Shaft - For Models: 8000, 8200, 8400, 8600, 8700, 9000, (9200, 9600, 9700, all 9 1969-1978). PTO Drive Shaft 37.562" Long, 20 Splines. (Part No: C9NN7A684A) $262.08 PTO Friction Disc - PTO friction disc with internal splines. For Models: 4110, 4600. (Part No: E0NNP743AA) $27.92 PTO Friction Disc - PTO friction disc with internal splines. For Models: 4000, 4100, 4600. (Part No: C5NNP743B) $17.16 PTO Friction Disc - PTO friction disc with internal splines, single-speed. For Models: 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (single- & 2-speed, 1981 & up), 8000 (10 1969-1978), 9000 (1969-1978). (Part No: D1NNP743A) $18.24 [Enlarge Picture] PTO Friction Disc - PTO friction disc with internal splines. Used on PTO with 2-speed transmission. For Models: 5000, 7000 (6 1973-1975), 5600, 5700, 6600, 6700, 7600 (single- & 2-speed, 1975-1981). (Part No: D3NNP743A) $18.24 [Enlarge Picture] PTO Housing Gasket - PTO Housing Gasket. For 2N, 9N, 8N, NAA, all through 1954. (Part No: C5NN747A) $.99 [Enlarge Picture] PTO Hub - PTO HUB DRIVE for models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110 12x12 Less Dual Power (Part No: F1NNN777AA) $80.46 [Enlarge Picture] PTO Output Shaft Sleeve - For (5640, 6640, 7740, 7840, 8240, 8340, all Non-Shiftable 11 1991 and up), (7810, 7910, 8210, all Non-Shiftable 1982-10 1991), (5610S, 6610S, 7610S, 7810S, all 1 1994 and up), (TW10, TW20, all 1979-1982), (5610, 6610, 6710, 7610, 7710, all 1981-10 1991), (TW15, TW25, TW5 all 1983-2 1990), (7010S 4 1996 and up). PTO Output Shaft Sleeve for 540 & 1000 RPM Two Speed Independent PTO. (Part No: D8NNB733AC) $78.77 [Enlarge Picture] PTO Overide Clutch - Overide Coupler For 1 3 8" Female To 1 3 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C660F) $44.85 [Enlarge Picture] PTO Overide Clutch - Overide Coupler For converting 1 1 8" Male To 1 3 8" Male, (Has 1 1 8" female at one end and 1 3 8" Male at the other)6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C670F) $44.85 [Enlarge Picture] PTO Overide Clutch - Overide Coupler For 1 3 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C680F) $77.00 [Enlarge Picture] PTO Overide Clutch - Overide Coupler For 1 1 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C690F) $67.39 [Enlarge Picture] PTO Seal for 1 3/8 Shaft - PTO Seal for 600, 700, 800, 900 models. (Part No: 471829) $9.95 PTO Shaft - Shaft, PTO rear. Length 29-1 2", 10 spline. For 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3910, 531, (Part No: C5NNA728A) $85.28 [Enlarge Picture] PTO Shaft - PTO shaft, 1-3 8". Converts standard NAA710B shaft to 1-3 8". For Models: NAA, Jubilee. (Part No: NAA710-38) $94.44 PTO Shaft - PTO shaft, 32-11 16". Converts standard NCA710B shaft to 1-3 8" splines. For 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA710-38) $93.03 [Enlarge Picture] PTO Shaft - For Models: 5000, 6000, 6610 all with single SP PTO. PTO Shaft is 25.4" Long, 21 & 25 Spline. (Part No: C5NNA701A) $187.91 PTO Shaft - For 2000, 3000, all with 4 SP Trans, 1965-1970. PTO Shaft is 32.5" Long, 10 Tooth Splines both ends. (Part No: C5NNA701K) $93.79 [Enlarge Picture] PTO Shaft - For 2000, 3000, 3600, 3610, all with 6, 7 or 8 Spd, Manual Reverse Transmission. PTO Shaft is 30.625" Long, 6 & 10 Spline. (Part No: E5NNA728AA) $92.16 [Enlarge Picture] PTO Shaft - For 2600, 2610, 3100, 3600, 3610, (2810, 2910, 3910, 4110, 4610 all with Independent PTO), (3900, 4600 All with 7, 8 Speed, Manual Reverse after 10 1980). PTO Shaft is 30.625" Long, 26 Tooth Splines (Part No: D8NN725AB) $209.30 [Enlarge Picture] PTO Shaft - For Models: 2000, 3000, 4110 all with Selecto Speed Trans & Single Speed PTO. PTO Shaft, 540 RPM. 28.160" Long, 6 spline, 24 spline. (Part No: C5NNA701C) $160.18 [Enlarge Picture] PTO Shaft - For Models: (3000, 3550, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 all 1965-1975), (3900, 4600, 515, 532, all Jan 1975-Sep 1980), 340, 340A, 340B, 445, 445A, 540, 540A, 540B, 545, 545A, all Jan 1978-Sep 1980). PTO Shaft Replaces C5NN710A, 30.625" Long, 6 & 26 Splines.``We do not have the PTO Housing Bearing for this shaft. (Part No: D3NN710D) $156.90 [Enlarge Picture] PTO Shaft - For 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, all with 2 Speed Shiftable PTO. PTO Shaft, 540 RPM. (Part No: E7NNB728AA) $136.17 [Enlarge Picture] PTO Shaft - For Models: (5100, 5200, 7100, 7200, all with 2 Speed after 6 1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600, 7700, all with 2 speed after 1975). PTO Shaft 540 RPM. 11.475" Long. 36 & 38 Tooth Splines. (Part No: D2NNB728A) $129.56 [Enlarge Picture] PTO Shaft - For Models: (5100, 5200, 7100, 7200, all with 2 speed after 6 1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600 both with 2 speed 1975 and later). PTO Shaft 1000 RPM. 11.475" Long, 38 Tooth Splines (Part No: D2NNB728B) $125.20 [Enlarge Picture] PTO Shaft - For Models: 5100, 5200, 7100, 7200, (5000, 7000 both with ind. PTO 1965-1973). PTO Shaft 540 RPM. 10.89" Long, 29 Tooth Drive Splines. (Part No: D2NNN752C) $139.90 PTO Shaft - For Models: (5640, 6640, 7740, 8740, 8240, 8340, all with 2 speed non-shift PTO 11 1991 and later), (5110, 5610, 5900, 6410, 6610, 6710, 6810, 7610, 7710, all with 2 speed non-shift PTO 1981 and later), (7910, 8210, both with 2 speed 1982 and later), (G170, 5100, 5600, 6600, 6700, 7100, 7600, 7700, 8000, 8670, 8700, 9700, all 2 speed 9 1993 and later), (TW10, TW20, both 1979 and later), (TW15, TW25, TW5, all 1983 and later). PTO Shaft 540 RPM Replaces D8NNB728AD, D8NNB728AC. 11.719" Long, 8 tooth drive splines. (Part No: E8NN710AA) $206.76 [Enlarge Picture] PTO Shaft - For (5640, 6640, 7740, 8740, all 2 speed shiftable 10 1989 and later), 8340 2 speed shiftable 11 1991 and later. PTO Shaft 1000 RPM. 6.383" Long, 20 Tooth Drive Splines. (Part No: E7NNB728BA) $115.39 [Enlarge Picture] PTO Shaft - For 5640, 6640, 7740, 7840, 8240, 8340, all less Dual Power. PTO Shaft is 39.94" Long, 22 & 32 Spline. (Part No: F0NN7A684AB) $210.63 PTO Shaft - For 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, all less sync trans. PTO Shaft 39.87" Long, 20 & 25 Spline. (Part No: E1NN7A684AB) $199.26 [Enlarge Picture] PTO Shaft - PTO Shaft For 9N, 2N, 8N (converts 1 1 8" shaft to 1 3 8" spline. This is the shaft only. (Part No: 9N710-38) $94.44 [Enlarge Picture] PTO Shaft - PTO Conversion Assembly For NAA, Jubilee, (converts 1 1 8" shaft to 1 3 8"). Complete assembly includes: Shaft housing, cover, retaining collar seal, collar with tapered pin, 2 snap rings, front bearing, shaft seal sleeve, seal, and shaft. Assembly ready to bolt on. Length measures about 30 5 16". (Part No: NAA700-38) $106.13 [Enlarge Picture] PTO Shaft - Conversion Assembly - PTO Conversion Assembly For 600, 700, 800, 900 (converts 1-1 8" shaft to 1-3 8" shaft, 6 spline). Length 32 11 16". (Part No: NCA700-38) $105.43 [Enlarge Picture] PTO Shaft Assembly - 1 3 8in 6-spline, for 2000, 3000, 2600, 3600, 2310, 2610, 3610, 2810, 2910, 231, 234, 334, 530A, 531. All with 6, 8 Speed Transmissions 1965-4 1983. PTO Shaft Assembly replaces Shaft E5nnA728AA and Housing E2NN733AA. (Part No: S.61695) $146.76 PTO Shaft Bearing, Front - For Models: 2000, 4000, 600, 700, 800, 900. All w 1.375" dia PTO. (Part No: E75GE9) $11.65 [Enlarge Picture] PTO Shaft Conversion Assembly - Shaft assembly with cap converts 1-1 8 inch PTO system to 1-3 8 inch. Assembled and ready to install by removing 4 bolts from cover. Length 30-7 8 inches. (Part No: 9N700-38) $101.95 [Enlarge Picture] PTO Shaft Housing - For 2000, 4000, 600, 700, 800, 900 all originally equipped with 1 3 8" PTO Shaft. PTO Shaft Housing (Part No: 310089) $71.28 [Enlarge Picture] PTO Shaft Housing - For 8N, 9N, 2N, (NAA 1953-54), Jubilee, NAB. (Part No: 9N733B) $21.11 [Enlarge Picture] PTO Shaft Seal - 1-5 8" x 2-1 2" x 7 8". For Models: Dexta, Super Dexta. (Part No: 957E703A) $14.86 [Enlarge Picture] PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1 8" or 1-3 8" PTO shaft. 2.45 O.D., 1 5 8 I.D., 5 8 wide. Replaces OEM#s : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB) $7.34 [Enlarge Picture] PTO Shaft Seal, Double Lip - O.D 2.45", I.D 1-5 8", 5 8" wide. For tractors with 1-1 8" to 1-3 8" PTO including 4, 6, 7, 8 speed transmissions, models: 9N, 2N, 8N, NAA, Jubilee, 2000, 3000, 3550, 4000, (1965-1975), 2600, 3600, 4100, 4600, (1975-1981), 2610, 3610, 4110, 4610, (1981-up). Replaces 9N703B, D8NN703AA, D9NN703BA. (Part No: D9NN703BB) $7.34 [Enlarge Picture] PTO Shaft Sleeve - For Models: 2000, 4000, 600, 700, 800, 900. All with 1.375" PTO dia. Replaces 310087. (Part No: E7NN797BA) $18.68 [Enlarge Picture] PTO Shaft Sleeve Bushing - For 1-1 8in. PTO shafts (NOT 1-3 8in.)1.185" I.D, 1.620" O.D, 1" thick. For Models: 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 9N735B) $5.97 [Enlarge Picture] PTO Shaft Support - Support, for PTO shaft and drive clutch valve. For Models: 5000, 7000. (Part No: C7NNN776C) $37.62 PTO Shaft Support - Support, for PTO shaft and drive clutch valve. For Models: 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D2NNN776A) $32.82 [Enlarge Picture] PTO Shaft Thrust Bushing - .930"long, 1.634" I.D . For Models: 2000, 4000, 600, 700, 800, 900, NAA. All w 1.125 or 1.375 PTO shaft. (Part No: NAA798A) $19.87 [Enlarge Picture] PTO Shaft, 1000 RPM - 1 3 8in. 21 spline Shaft, 11.7 in long shaft.Shaft, PTO drive output, 1000 rpm. For Models: 5610S, 5610, 5640, 6610S, 6610, 6640, 6710, 7010S, 7610S, 7610, 7710, 7740, 7810S, 7810, 7840, 7910, 8210, 8240, 8340, TW10, TW20, TW25, TW5. (Part No: D8NNB728BC) $129.90 [Enlarge Picture] PTO Shaft, 540 RPM - 1 3 8in. 6 spline Shaft, PTO drive output, 540 rpm. For Models: 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810, 7910, 8210, 8670, TW5, TW15, TW25, TS90, TS100, TS110, TW10, TW20. (Part No: E6NNB728AA) $137.90 [Enlarge Picture] PTO Shaft, Independant, 1000 RPM - 1-3 8" dia., 21 spline. For Models: 4030, 4230, 4330, 4835, 5530, 5635, 6530, 6635, 7530, 7635, 8160, 8260, 8360, 8560. Replaces 5185601. (Part No: 5149242) $112.11 [Enlarge Picture] PTO Shaft, Rear Lower - Shaft, PTO rear lower. For single-speed 540 rpm independent PTO drive shaft. Tractors: 5000, 7000 (6 1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-9 1989), 5610S, 6610S, 7610S (1 1994-12 1994). Replaces D2NNN752B, E3NNN752AA. (Part No: E4NNN752AA) $127.86 [Enlarge Picture] PTO Shift Lever - For 6 & 8 Speed transmission on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (w'Trans or live PTO) (Part No: C5NN723A) $31.35 [Enlarge Picture] PTO, Snap Ring - For Models: 2N, 8N, 9N, NAA all 1943-54. 2.58 inches O.D., 2.26 inches I.D. Must be ordered in quantities of 2, Priced indvidually. (Part No: 9N754) $1.95 [Enlarge Picture] Seal, PTO - 89 x 44.5 x 19.1mm. For Models: Major, Power Major, Super Major. Replaces 81805050. (Part No: E1ADDN7279A) $18.70 [Enlarge Picture] Seal, PTO - 89 x 54 x 12.5mm. Seals used in pairs sold individually. For Models: Major, Power Major, Super Major. Replaces 81717958. (Part No: E1ADKN7297B) $6.92 [Enlarge Picture] Seal, PTO - 63.7 x 36.8 x 18.8mm. For Models: Major, Super Major, Power Major. Replaces 81717963. (Part No: E2NN7305A) $22.40 [Enlarge Picture] Shaft - PTO Input (15 tooth) - 15 tooth input shaft Fits 2810, 2910, 3900, 3910, 4100, 4110, 4600, 4610(Most Industrial & Utility Models after 1975 w 8 speed or 6x4 manual reversing transmission). 4000 (1965 & newer) Note: Can Replace the 17 tooth input shaft on 4000 models prior to 1972 BUT you must also order Gear Assembly P N D1NN791A. (Part No: D1NN772B) $150.29 [Enlarge Picture] Shaft Housing, PTO - For 1 3 8in. PTO Shaft. Fits: 2000, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910 (65-4 1983). (Part No: E2NN733AA) $43.94 [Enlarge Picture] Sleeve, PTO Intermediate Shaft - Has 6 & 26 splines. For 6 & 8 Speed transmission on: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (w'Trans or live PTO) (Part No: C5NNN705A) $94.24 [Enlarge Picture]   Paint Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $46.21 Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $23.53 Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $31.98 [Enlarge Picture] Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $81.07 [Enlarge Picture] Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $134.46 [Enlarge Picture] Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $46.05 Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $46.05 Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $21.90 Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $21.90 Paint, Aluminum, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.****From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $7.11 Paint, Aluminum, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $7.11 Paint, Bright Red, 1 Gallon - For Models (1958-1969). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP310GAL) $45.54 Paint, Bright Red, 1 Quart - For models (1958-1969). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP310QT) $21.98 Paint, Bright Red, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.****For models (1958-1969).From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP310SP) $7.34 Paint, Brownish Medium Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245GAL) $60.10 Paint, Brownish Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245QT) $25.22 Paint, Brownish Medium Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245SP) $7.58 Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $58.49 Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.73 Paint, Clear Coat, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $7.13 Paint, Dark Gray, 1 Gallon - For tractors: 9n, 2n (1939 to 1947). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2888GAL) $49.01 Paint, Dark Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888QT) $23.26 Paint, Dark Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888SP) $6.53 Paint, Dearborn Red, 1 Gallon - For 1958-1962 models. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP115GAL) $64.85 Paint, Dearborn Red, 1 Quart - For tractors (1958-1962). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP115QT) $23.53 Paint, Dearborn Red, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** For tractors (1958-1962). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP115SP) $7.58 Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For Models 1963 and up. (Part No: TP360GAL) $46.05 Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For Models 1963 and up. (Part No: TP360GAL) $46.50 Paint, Empire Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360QT) $21.90 Paint, Empire Blue, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.***High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360SP) $7.11 Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $64.85 Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $64.85 Paint, Ford White, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $7.58 Paint, Ford White, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $7.58 Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $46.05 Paint, Gloss Black, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $7.11 Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760GAL) $80.25 Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760LF-QT) $34.84 Paint, Light Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330GAL) $46.05 Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330QT) $21.90 Paint, Light Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330SP) $7.34 Paint, Medium Gray, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $46.05 Paint, Medium Gray, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $44.50 Paint, Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240QT) $21.90 Paint, Medium Gray, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability, heat resistant. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240SP) $7.11 Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $49.01 Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $49.01 Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $23.26 Paint, Satin Black, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $7.34 Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $49.01 Paint, Soft Black, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $6.50 Paint, Vermillion Red, 1 Gallon - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822GAL) $46.01 Paint, Vermillion Red, 1 Quart - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822QT) $23.62 Paint, Vermillion Red, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.****For models (1948-1957). Vermillion Red. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822SP) $7.53 Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $64.85 Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $64.85 Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365QT) $26.78 Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics (Part No: TP365QT) $26.78 Paint, Vibrant Blue, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $7.58 Paint, Vibrant Blue, Aerosol, 6 Cans - ****SOLD IN MULTIPLE OF 6, PRICE SHOWN IS PER CAN.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $7.58 TIRE PAINT, BLACK - BLACK TIRE PAINT (1 QUART)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $19.95 TIRE PAINT, BLACK - BLACK TIRE PAINT (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844) $39.95 [Enlarge Picture]   Seats Arm Rests - Pair - Blue Vinyl on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Part No: R1164) $88.78 Arm Rests - Pair - Blue Fabric on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Part No: R1167) $90.34 Arm Rests - Pair - Blue Vinyl on Steel For 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat (Part No: R1156) $88.78 Arm Rests - Pair - Blue Fabric on Steel For 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat (Part No: R1159) $90.34 Backrest Cover - BRC416U backrest cover with pad insert for D8NNB416CB backrest. For 6X, 7 AG, (Part No: BRC416P) $40.30 Backrest Cover - Backrest cover for D8NNB416CB backrest. For 6X, 7 AG, (Part No: BRC416U) $40.86 Bucket Seat with Base - Fits 340, 345, 445, 540, 1000, 2000, 2100, 2110, 2120, 2150, 2250, 2255, 2600, 2810, 2910, 3000, 3100, 3300, 3320, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4500, 4600, 4610, 5000, 5100, 5200, 5600, 5610, 5900, 6000, 6600, 6700, 7000, 7100. Blue Vinyl seat with sliding base. Has adjustable Height. Measurements: Seat 19 inches wide, Seat 14 inches high, base plate is 13.5 inches deep and 8.5 inches wide. Base mounting bolt area is 13 inches by 5 inches. Seat has a grommitted drain hole. (Part No: 915978) $132.82 [Enlarge Picture] Cushion Bottom - Upholstered hard bottom seat cushion. For Models: 8000, 9000. Replaces C7NNA402B seat. For 8000, 9000, DEXTA, MAJOR. (Part No: FDCC-10) $58.38 Cushion Cover - Cover only for : DDN406B Cushion. For 8000, 9000, DEXTA, MAJOR, (Part No: FDCC-1) $26.68 [Enlarge Picture] Flip-Over Seat Spring, Hinge & Bolt Assembly - For flip-over seats on 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4-cylinder gas. Seat not included. Equivalent to NCA404B and NCA436A. (Part No: R0642R0643) $51.83 [Enlarge Picture] Inlay Foam - Foam inlay only : For DDN406B cushion. For 8000, 9000, DEXTA, MAJOR, (Part No: 181326M1) $25.94 [Enlarge Picture] Pan Seat - 19 inch wide fixed seat For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 2000, 4000, all with 4 cylinder engine. This is not a flip-over seat. (Part No: 8N400) $43.04 [Enlarge Picture] Pan Seat - 19 inch wide flip-over style. Replaces OEM# C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 2N, 8N, 9N(4-cylinder). May come with a darker blue paint than pictured. (Part No: C5NN400AE) $42.09 [Enlarge Picture] Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865) $37.24 [Enlarge Picture] Rubber Bumper - Drivers seat to spring. For Models: 8N, NAA, NAB. All 1948-1954. (Part No: 8N434B) $3.52 [Enlarge Picture] SEAT BELT, UNIVERSAL - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $14.90 SEAT INDUSTRIAL - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $89.50 SEAT INDUSTRIAL - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $89.50 SEAT, AIR SUSPENSION, BLACK LEATHERETTE - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top w Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. ***CALL FOR FREIGHT QUOTE*** (Part No: TS5056V) $1099.90 [Enlarge Picture] SEAT, AIR SUSPENSION, CLOTH - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top w gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. ***CALL FOR FREIGHT QUOTE*** (Part No: TS5056) $1220.25 [Enlarge Picture] SEAT, AIR SUSPENSION, CLOTH - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top w gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. ***CALL FOR FREIGHT QUOTE*** (Part No: TS5056) $1220.25 [Enlarge Picture] SEAT, UNIVERSAL - Seat assembly, Black leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK) $101.90 SEAT, UNIVERSAL - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $104.90 SEAT, UNIVERSAL - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $104.90 SEAT,UNIVERSAL - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $93.40 [Enlarge Picture] SEAT,UNIVERSAL - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $93.40 [Enlarge Picture] SEAT,UNIVERSAL - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40 [Enlarge Picture] SEAT,UNIVERSAL - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40 [Enlarge Picture] SEAT,UNIVERSAL INDUSTRIAL W/SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1 4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $58.95 [Enlarge Picture] Seat Assembly - Blue. Base (Footprint) measures 8 1 4 inches long and 4 1 4 inches wide. For Models: 2000, 3000, 4000, 5000, 7000, 4100, 2600, 3600, 4600, 5600, 6600, 7600, 4110, 2610, 2810, 2910, 3610. (Part No: E7NN400GA) $197.03 [Enlarge Picture] Seat Assembly - Bucket seat with arm rests in blue vinyl. For Models: 2000, 3000, 4000, 5000, 7000. (Part No: R1263) $333.03 [Enlarge Picture] Seat Assembly, Black - Black Vinyl seat with sliding base. Has adjustable Height. Measurements: Seat 19 inches wide, Seat 14 inches high, base plate is 13.5 inches deep and 8.5 inches wide. Base mounting bolt area is 13 inches by 5 inches. Seat has a grommitted drain hole. Fits 340, 345, 445, 540, 1000, 2000, 2100, 2110, 2120, 2150, 2250, 2255, 2600, 2810, 2910, 3000, 3100, 3300, 3320, 3330, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4500, 4600, 4610, 5000, 5100, 5200, 5600, 5610, 5900, 6000, 6600, 6700, 7000, 7100. (Part No: 915978_BLACK) $132.82 [Enlarge Picture] Seat Assembly, Black & White - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA888-5) $106.33 [Enlarge Picture] Seat Assembly, Blue - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. Complete seat. (Part No: CSA887-8) $121.15 [Enlarge Picture] Seat Back - Blue Vinyl on Steel For 4330, 4340, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6810, 7000, 7100, 7200, 7600, 7610, 7700 (Part No: R0862) $99.69 Seat Back - Blue Vinyl on Steel For 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700 with Bostrom Style Seat (Part No: R1163) $88.78 Seat Back - Blue Fabric on Steel For with Bostrom Style Seat 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700 (Part No: R1166) $94.16 Seat Back - Blue Vinyl on Steel For 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat (Part No: R1155) $102.80 Seat Back - Blue Fabric on Steel For 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat (Part No: R1158) $104.36 Seat Belt, Adjustable - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $36.35 [Enlarge Picture] Seat Bottom - Blue Vinyl on Steel For 2120, 2300, 2310, 2600, 2610, 2910, 3055, 3100, 3120, 3150, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 39003910, Late 4000, 4100, 4110, 4200 (Part No: R0861) $109.03 Seat Bottom - Blue Vinyl on Steel For 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 (Part No: R1162) $112.14 Seat Bottom - Blue Fabric on Steel. For Models: 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Part No: R1165) $115.26 Seat Bottom - Blue Vinyl on Steel For 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat (Part No: R1154) $112.14 Seat Bottom - Blue Fabric on Steel. For Models: 8000, 8200, 8400, 8600, 9000, 9200, 9600 with Non-Bostrom Style Seat. (Part No: R1157) $115.26 Seat Clip - For Models: 8N, NAA (1948-1954).This clip is for drivers seat to spring. This clip will only work with original 3 inch wide spring. Many of the replacement springs are 2 3 8 inches wide. (Part No: 8N433) $7.53 [Enlarge Picture] Seat Cover - Seat cushion cover for D2nna402a seat cushion assembly. For 6X, 7 AG. (Part No: SCC402U) $32.02 Seat Cover With Pad - SCC402U Seat Cushion cover with pad insert for D2NNA402A seat assembly. For 6X, 7 AG, (Part No: SCC402P) $36.57 Seat Cushion - Foam cushion inlay and cover complete for Dexta and Major. Color is gray. Replaces DDN406B Seat cushion. For Models: 8000, 9000, DEXTA, MAJOR. (Part No: FDCC-12) $48.21 [Enlarge Picture] Seat Cushion (Blue and White) - For all ford tractors with 21 inch wide steel pan seat. This seat cushion is blue and white with a FORD script logo. (Part No: R4120) $32.55 [Enlarge Picture] Seat Cushion (Red and White) - Seat Cushion - Deluxe with 2in. of foam padding. For all ford tractors with 21 inch wide steel pan seat. This seat cushion is Red and white with a FORD script logo. (Part No: R4118) $32.55 [Enlarge Picture] Seat Cushion (Red) - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is red with a FORD script logo. (Part No: 8N401R) $42.58 [Enlarge Picture] Seat Cushion Set - For Models: Dexta, Super Dexta. (Part No: S.67202) $78.93 [Enlarge Picture] Seat Cushion, Blue - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is blue with a FORD script logo. (Part No: 9N401B) $44.71 [Enlarge Picture] Seat Hinge - Fits Models:2000, 4000, 600, 800, 8N, 900, NAA. Can replace OEM 86531095. This hinge is made for the 2 3 8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Part No: R0643) $13.61 [Enlarge Picture] Seat Hinge Pin - Exact of original. For Models: 8N, NAA, Jubilee all from 1948 to 1954. (Part No: 352664S) $4.69 [Enlarge Picture] Seat Pan - With bracket on back. For Models: (Dexta, Super Dexta, Power Major, Super Major all built after 11 1960). (Part No: 957E400C) $124.60 [Enlarge Picture] Seat Pin & Bushing Kit - For Models: (500, 600, 700, 800, 900, 2000 all w Rest-O-Ride seat), 4000, 4100, 4110, 4130, 4140, (6000 w regular seat) (Part No: R5117) $55.79 [Enlarge Picture] Seat Spring - Fits 2N, 9N (AI) (Part No: 9N404) $39.99 [Enlarge Picture] Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 800, 900, 2000, 4000 with 4 Cylinder Engine. 2 3 8 inches wide. May require modification of bolt holes for an original hinge. (Part No: R0642) $38.22 [Enlarge Picture] Tie-On Seat Cover - Blue & White, 19" wide. Deluxe with 2 inches of foam. (Part No: R1013) $37.79 [Enlarge Picture] Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $139.90 [Enlarge Picture] Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $99.26 [Enlarge Picture] Universal Seat, Grizzly Style - Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1 2 to 13 inch center to center (side to side). Slide track for forward rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100) $126.41 [Enlarge Picture]   Sheet Metal / Body Parts Air Cleaner Door - Air cleaner door w fastener. COMES PRIMERED, NOT PAINTED. For air cleaner opening in hood, for tractor 8N (1948-1952). Also for 9N & 2N when replacing hood with 8N16612. (Part No: 8N9661) $13.21 [Enlarge Picture] Air Cleaner Door - Air Cleaner Louvered Door Restoration Quality For 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B (Part No: NAA9661B) $23.25 [Enlarge Picture] BUMPER - Fits models: 4000, 5000, 7000, 5600, 5900, 6600, 7600. Replaces C5NN17750C. (Part No: S.61053) $99.90 [Enlarge Picture] Battery Box - Fits 8N only. (Part No: 8N10732) $50.91 [Enlarge Picture] Battery Box - For NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 - 1953 to 1964. Replaces NCA 10432A. Comes Primed. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN & NCA10728WN. Note additional parts numbers in "comments" section of order form if required. (Part No: C0NN10732T) $47.72 [Enlarge Picture] Battery Box Kit - Fits 8N- Includes Box, Hold Down, Cables & Bolts (Part No: SRP8NFB) $84.48 [Enlarge Picture] Battery Cover, Restoration Quality - Battery cover with access door, also with round cable opening. Exact of original (powder coated red). Fits: NAA, Jubilee (Part No: NAA5162) $53.30 [Enlarge Picture] Battery Cover, Restoration Quality with Decals - Battery cover with access door, also with flat cable opening. Exact of original. Powder coated Ford red, decals included. For 8N (1948 to 1952). (Part No: 8N5162) $53.30 [Enlarge Picture] Battery Door - For 9N, 2N, 8N. Battery Door.Includes handle, hinge and latch. (Part No: 9N16938C) $37.95 [Enlarge Picture] Battery Door Handle Kit - Contains battery door latch with Handle and stud. For Models: 9N, 8N, 2N. (Part No: 9N16625-56) $14.75 [Enlarge Picture] Battery Door Hinge Kit - For Models: 9N, 2N, 8N. Contains hinge half for battery door and hood plus pin. (Part No: 9N16651-89) $17.95 [Enlarge Picture] Battery Hold Down - Bolt with nut. For Models: 2000, 3000, 4000, 5000. (Part No: C5NN5161CWN) $8.61 [Enlarge Picture] Battery Hold Down - Bolt with nut. For Models: 2000, 4000, 600, 700, 800, 900, 8N. (Part No: NCA10728WN) $5.78 [Enlarge Picture] Battery Hold Down - (Must use 01A10726 rubber insulator with this part). For Models: 9N, 2N (1939 to 1942). (Part No: 9N10724) $16.95 [Enlarge Picture] Battery Hold Down - For 9N, 2N, 8N, 2000, 3000, 4000, all 6 volt with battery boxes 8N10732 and C0NN10732T. 9 1 4" width, 7 1 4" length, center to center mounting holes 10 1 8" (Part No: NCA10718A) $11.90 [Enlarge Picture] Battery Hold Down Assembly - Production style battery hold down kit consists of battery hold down cross bar, 2 battery hold down straps, and rubber insulator. For Models: (9N, 2N 1939-1942). (Part No: 9N10724-KIT) $39.99 [Enlarge Picture] Battery Hold Down Bolt - Bolt with nut. For Models: 8N, NAA (1948-1954). (Part No: 8N10728WN) $5.90 [Enlarge Picture] Battery Hold Down Bolts - Battery Hold Down Bolts with nuts for 9N, 8N, 2N. One NCA10728WN and one 8N10728WN. (Part No: NCA10718A-BOLTS) $12.15 [Enlarge Picture] Battery Hold Down Kit - For Models: 9N, 2N, 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000-4000 series (1953-1964). Dimensions of hold down, Width 9-1 4", length 7-1 4", center-to-center mounting holes 10-1 8". The short bolt included with this kit is not used on the 9N, 2N, 8N, NAA. A simple bolt is used but not supplied with this kit. (Part No: NCA10718A-KIT) $21.58 [Enlarge Picture] Battery Hold Down Rod - For Model: 2N, (1943-1947). (Part No: 2N10728) $9.94 [Enlarge Picture] Battery Hold Down Strap - Fits 9N10724 (goes through the cast dash). For 9N, 2N early, (1939 to 1942). (Part No: 9N10728B) $17.90 [Enlarge Picture] Battery Hold Down, Left Side - For Model: 9N (1943 to 1947). Ford improved design, originally sold in the mid 1940's. (Part No: 9N10748) $18.95 [Enlarge Picture] Battery Hold Down, Right Side - For Model: 9N (1943 to 1947). Ford improved design, originally sold in the mid 1940's. (Part No: 9N10728C) $18.95 [Enlarge Picture] Battery Hold-Down Retainer - For 9N, 2N, (1939-1947). Ford improved design was originally sold in the mid 1940's. (Part No: 2N10721) $26.95 [Enlarge Picture] Battery Tray - Has air cleaner mount. Also replaces 2N10734 and 2n10735. Powder coat gray. (Part No: 2N10732) $64.95 Battery Tray - Has air cleaner mount. Also replaces 2N10734 and 2n10735. Powder coat gray. (Part No: 2N10732) $64.95 Battery Tray, DIESEL - Fits the following DIESEL tractors from 1965 to 1967: 2000, 3000, 4000, 5000. INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500 (all 65-67). (Part No: C5NN10723H) $91.08 [Enlarge Picture] Battery, Door Handle Kit, Chrome - Chrome Latch kit. For Models: 9N, 2N, 8N. (Part No: S.60601) $13.20 [Enlarge Picture] Bolt Kit 8 Per PKG - Bolts for running board to running board bracket. Kit includes 8 running board bracket bolts, nuts and washers. For tractors:: 8N, NAA (1948-1954). (Part No: 355471-KIT) $24.86 [Enlarge Picture] Bolt Kit, Instrument Panel to Hood - Bolt, nut & washer kit. Bolt heads are EXACT as original. For 8N (1948-1952) (Part No: 355494-KIT) $4.42 [Enlarge Picture] Bracket Set For Lights - Fits rounded fenders. For Models: 2N, 8N, 9N, NAA, Jubilee. (Part No: 1750673M1) $34.18 [Enlarge Picture] Bumper - Bumper. High quality bumper complete with mounting brackets. Mounts to axle. Unit is painted blue. For 2000, 231, 233, 2600, 3000, 333, 3600, 4100, 531. (Part No: D8NN17750AA) $166.90 [Enlarge Picture] Bumper - For NAA, Jubilee, 600 & 800 Series (thru 1964), 2000 & 3000 (1965 & up), 2600, 3600, 4600 (1975 & up), 9N, 2N, 8N - has 3 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Painted red, axle mount with mounting brackets. This is an aftermarket item. Add an additional $20.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: BU1021) $214.05 [Enlarge Picture] Bumper Bolt Kit 4 Pieces - Bumper Bolt kit, front axle bolt kit, contains 2-3.40 bolts, 2-4 bolts, 4-351505s8 washers & hex nuts. For tractors: 9N, 2N, 8N, NAA, 600, 800 {1939-1957}. For 600, 700, 800, 900, NAA (Part No: 350790-KIT) $11.23 [Enlarge Picture] Bumpers 4 Per PKG - Rubber bumpers for gas filler lid door {set of 4}. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 11A16758A) $6.61 [Enlarge Picture] Bumpers 6 Per PKG - Bumper, hood tip center panel rubber bumper kit {6 per pkg}. For tractors: NAA, 600, 700, 800, 900 {1953-1957}. (Part No: 354177S6) $9.94 Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $22.95 [Enlarge Picture] Dash Panel Cover - For models Dexta, Super Dexta. (Part No: E187NE9) $28.95 [Enlarge Picture] Fender - With mounting backet. Fits left hand or right hand side on the following tractors: 501, 601, 701 (except hi-clear); 2000, 4000 (1958 thru 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Additional shipping charge of $10 per fender will be added due to size weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D5NN16312LR) $136.23 [Enlarge Picture] Fender - For Models: 9N, 2N, 8N. Rear fender, dished type, with mounting bracket. Additional $20.00 per fender shipping charge will be added due to the size & weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N16312) $98.42 [Enlarge Picture] Fender - Fender with Bracket For NAA, Jubilee - Fits RH & LH. (Part No: CONN1623A) $101.08 [Enlarge Picture] Fender - Fender panel (no longer supplied by OEM). Panel comes primed. To install, remove fasteners from old panel, drill new holes and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N (1939 to 1952) and row crop high clearance models 700 and 900 (1957-1962), fits right side or left side. (Part No: FF101) $84.20 [Enlarge Picture] Fender - Fender Skin, Bracket not included- Fits RH or LH. For Models: 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Add $20.00 per fender in addition to regular shipping charges. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: E1NN16315DA) $72.84 [Enlarge Picture] Fender Bolt Kit 4 Per PKG - Bolt kit, rear fender bracket to axle housing, bolts 6 1 4 x 5 8, nut & washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, some early 2000 and 4000. (Part No: 355310-KIT) $32.58 [Enlarge Picture] Fender Bracket LH/RH - For 2810, 2910, 3910, 4600, 4610, 4630, 4830, 5030, 5600, 5610, 6600, 6610, 7600, 7610. Fender Bracket for Left or Right Side (price is each). Add $10 extra for shipping each piece due to weight of 32 lbs each. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: D3NN16N319C) $113.75 Fender Bracket Spacer - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For tractors: 8N, NAA {1949-1954}. For 321, 339, 340, 501 (Part No: 8N15532) $11.23 [Enlarge Picture] Fender With Bracket, Scripted - Rear fender with mounting bracket. Has STAMPED "FORD" script imprint. ADD ADDITIONAL $10 SHIPPING PER FENDER DUE TO SIZE AND WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Fits LH or RH side. Fits 501, 601, 701 (except high clearance), 2000 & 4000 (1958 to 1964);2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). (Part No: D5NN16312LRS) $171.51 [Enlarge Picture] Fender With FORD Script - Fender panel, steel. Has raised 'FORD' script. Panel comes primed. To install, remove fasteners from old panel and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N, 700, 900, NAA, JUBILEE(1939 to 1954), fits right side or left side. (Part No: FF101S) $185.99 [Enlarge Picture] Fender, LH - Fits Fordson Major, Power Major. Left hand side. Add $20 to shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Note: Picture is for reference only. (Part No: E1ADKN16313B) $214.76 [Enlarge Picture] Fender, LH - For models without brake drums. Fits Fordson Super Major. LEFT hand side fender. Add $20 to shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Note: Picture is for reference only. (Part No: E1ADDN16313E) $235.29 [Enlarge Picture] Fender, LH - Flat top. For Models: 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. ** $20 Will be added to shipping cost due to weight ** *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: E5NN16313DA) $200.20 [Enlarge Picture] Fender, LH - Fender with Bracket LEFT Hand for Dexta and Super Dexta. 18cm width. Note: Picture is for reference only. (Part No: 957E16312C) $246.51 [Enlarge Picture] Fender, RH - Fits Fordson Major, Power Major. Right hand side. Add $20 to shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: E1ADKN16312B) $219.63 [Enlarge Picture] Fender, RH - For model without brake drums. Fits Fordson Super Major. Add $20 to shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: E1ADDN16312B) $235.29 [Enlarge Picture] Fender, RH - Flat top. For Models: 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. ** $20 Will be added to shipping cost due to weight ** *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: D8NN16312ABB) $200.20 [Enlarge Picture] Fender, RH - Fender with Bracket RIGHT Hand for Dexta and Super Dexta. 18cm width. (Part No: 957E16312A) $246.51 [Enlarge Picture] Foot Board - 11" long, 20.5" wide. For Models: 2000, 3000. (Part No: C5NN16450H) $61.62 [Enlarge Picture] Foot Board - 20.5" long, 10.560" wide. For Models: 2100, 2150, 233, 2600, 3100, 3120, 3150, 3600. (Part No: C7NN16451D) $61.62 [Enlarge Picture] Front Bumper - For Ford 4000, 4500 & 5100, 7100 (1965 & up) - has 3 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Painted red, frame mount with mounting brackets. This is an aftermarket item. Add an additional $15.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: BU1023) $216.82 Front Bumper - Heavy Duty - For 2N, 9N, 8N, . Front Bumper - Heavy Duty. Add an additional $15 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Welded, not rivited. Slightly different than original. (Part No: 311541HD) $91.64 [Enlarge Picture] Front Bumper - OEM Quality - Front bumper assembly with four bars for extra protection. Fits 9N, 2N, 8N. Made to take rugged service. Welded and riveted construction. Exact copy of the original OEM bumper. Add additional $15.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 311541OE) $198.17 [Enlarge Picture] Front Cap Shell - For Models: 2000, 3000, 2600, 3600, 4110, 231, 531. Oil Bath Breather Type. Must Use One Piece Grill D5NN8200A WITHOUT HEADLIGHTS OR D5NN8200C WITH HEADLIGHTS. (Part No: D4NN8N202D) $330.44 [Enlarge Picture] Front Grill - Fits 2000 and 4000. Both using 4 cylinder gas engines only. 1962 TO 1964. (Part No: C3NN8200A) $75.82 [Enlarge Picture] Front Grill - Fiberglass. For Models: NAA, 600, 800. Replaces NCA8200A. (Part No: 713477) $191.40 [Enlarge Picture] Front Grill, Restoration Quality - Metal. For Models: NAA, Jubilee, 600, 800. (Part No: NCA8200A) $234.23 Front Nose Panel with Latches - For Models: 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 4610S, 5610, 5610S, 6610, 6610S, 6810, 7610, 7610S, 7810, 7810S, 250C, 260C. Replaces E4NN16A858AB18B. (Part No: E4NN16A858AB) $171.48 Front Shell - No side hole for air cleaner. NOT EXACTLY LIKE ORIGINAL - 2 PIECE GRILL WILL NOT FIT. Uses 1 piece gril part # D5NN8200A. For Models: (2000, 3000, 4000SU use grill s.60623 or s.60623M), 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, 333. NOTE: Fit to tractor before painting. (Part No: D4NN8N202C) $253.63 [Enlarge Picture] Front Shell - For Model: Fordson Super Dexta. SPECIAL ORDER item please allow up to 30 days for delivery. (Part No: 957E8202B) $761.61 [Enlarge Picture] Front Shell - Stamped Metal like original. For Models: Fordson Major, Power Major, Super Major. SPECIAL ORDER - shipped from England, please allow up to 30-36 days for delivery. (Part No: E1ADDN8203A) $692.86 [Enlarge Picture] Front Shell - Front Cap Shell Assembly For 4600, 5600, 6600, 515 - Oil Bath Breather Type - Right Side Hole for Air Cleaner (61628S) (Part No: D5NN8N202A) $265.20 Front Shell, w/ Side Hole for Air Cleaner - For Models: 2000, 3000, 4000SU, 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, (333 diesel). Will work on gas models with some modification. Uses grill D5NN8200A. (Part No: S.61627) $261.95 [Enlarge Picture] GRILL kit (Plastic) - Grill Kit For 2000, 3000, 4000, 5000. Grill For Three And Four Cylinder Tractors (1965-3 68). Without headlight holes. Contains 1 TOP section containing FORD lettering (OEM #C9NN8A163AG)and 1 bottom section (OEM #D1NN8151A), and 2 studs and 2 clips for mounting lower section. Top section is mounted using sheet metal screws(not supplied). (Part No: D1NN8151A-KIT_) $42.90 Grill - For Models: 1310, 1510, 1710, 1910, 2110. (Part No: SBA350300280) $145.81 Grill - One Piece Grill With Lights For 1968-Up. Measures 18 1 2 inches wide and 23 3 4 inches tall. (Part No: D5NN8200C) $65.34 [Enlarge Picture] Grill - Metal replacement Grill For 2310, 2610, 2810, 2910, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 6410, 6610, 6810, 7610, 7810, 8010. Replaces E0NN8200AA, E0NN8200AA27G and E0NN8200AA27V. This Grill Is For Use On Tractors W External Mounted Headlamps. (Part No: E0NN8200AA98M) $71.55 [Enlarge Picture] Grill - Radiator grill assembly, with ROUND grill bars. For tractors: 9N {early 1941}. Manufactured to restoration standards. (Part No: 9N8206C) $367.42 [Enlarge Picture] Grill - Radiator grill assembly, with TEAR DROP grill bars. For tractors: 9N, 2N. Manufactured to restoration standards. (Part No: 9N8206D) $306.57 [Enlarge Picture] Grill Assembly, Front - Metal 2-piece grille for 2000, 3000, 4000, 5000 (65-4 68). (Part No: C5NN8A163A) $108.00 [Enlarge Picture] Grill Insert Upper - For models 2000, 3000, 4000, 5000(1971-1975), 4200(1971-1975), 5200, 7200(1968-1975), will not fit 3400 and 3500.This is a plastic insert with FORD letters. (Part No: C9NN8A163AG) $24.09 [Enlarge Picture] Grill Panel, Lower - For Models: 801, 811, 821, 841, 851, 861, 871, 881. (Part No: 310032) $139.90 [Enlarge Picture] Grill Panel, Upper - For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 310984) $161.23 [Enlarge Picture] Grill Panel, Upper - Aluminum. Look like part number C9NN8A163AG but does not come with FORD emblem (available separately #S.61520 $23.00). Bare metal. For Models: 2000, 3000, 4000, (5000 1968-1 1970). (Part No: C7NN8150G) $84.48 Grill Panel, Upper, Inner - For Models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 310982) $155.23 [Enlarge Picture] Grill Screen - For 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532. One piece Plastic construction like original. Grill Screw Clips (2 needed, most applications) available As S.60436; order in comments section of order form. (Part No: D5NN8200A-OEM) $50.95 [Enlarge Picture] Grill Screen - For Models: 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532. One Piece Metal construction which has 'Ford' lettering. Grill Screw Clips available As S.60436 $4.03 each; order in comments section of order form. NOT AN EXACT REPLICA OF ORIGINAL. (Part No: D5NN8200A) $45.15 [Enlarge Picture] Grill Screen - 20.625" wide, 15.500" high. Upper grill screen For Three And Four Cylinder Up To 1965-3 1968. For Models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 5000, 5100. (Part No: C5NN8202AA) $75.48 Grill Screen - LH - Grill Screen for side panel Left. For Models: 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, TW10, TW15, TW20, TW5. (Part No: D5NN8151A) $37.59 [Enlarge Picture] Grill Screen - RH - Grill Screen for side panel Right. For Models: 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5. (Part No: D5NN8150A) $37.59 [Enlarge Picture] Grill Screen Clip - For Models: 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532( 2 needed, most applications. Please verify qty needed from your tractor). (Part No: S.60436) $4.03 [Enlarge Picture] Grill Set, With Light Holes - Left & Right Hand sides. Fits: Dexta, Super Dexta. (Part No: 957E8163B) $108.04 [Enlarge Picture] Grill Set, With Light Holes - Left & Right Hand sides. Fits: Fordson Super Major, Power Major (11 60 to 1964). (Part No: E1ADDN8163) $110.49 [Enlarge Picture] Grill Set, Without Light Holes - Left & Right Hand sides. Fits: Dexta, Super Dexta. (Part No: 957E8163A) $106.57 [Enlarge Picture] Grill, Aluminum - Cast aluminum grill with horizontal bars, used on steel hood early 9N. For Model: 9N up to s n 50000. (Part No: 9N8206A) $275.98 [Enlarge Picture] Grill, Bottom - Plastic For 2000, 3000, 4000, 5000, 7000 (4 68>). (Part No: D1NN8151A) $30.71 [Enlarge Picture] Grill, With Light Holes - Metal replacement Grill For 2310, 2610, 2810, 2910, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5110, 5610, 6410, 6610, 6810, 7610, 7810, 8010. With Light Holes towards the bottom of the grill. Mounting bolt holes are 5 1 2 inches from the top. (Part No: E1NN8200AA) $66.30 [Enlarge Picture] Grille - Near Restoration quality (not exact, but close). For 8N only. Will fit 2N and 9N with modification - remove brackets from old grille and apply to new grille. (Part No: 8N8204-R) $106.68 [Enlarge Picture] Grille - After market version of grille. For 8N (1948-1952). Will fit 2N and 9N with modification - remove brackets from old grille and apply to new grille. (Part No: 8N8204) $58.25 [Enlarge Picture] Grille Screen, Ferguson System, Blue - Fits 9N, 2N. Replaces 9N-8210. Complete with fasteners. Exactly like the original. (Part No: 9N8210) $144.78 [Enlarge Picture] Grille Screen, Ford Farming, Red - Fits 8N, Replaces 8N-8210. Complete with fasteners. Exactly like the original. 15 7 8" wide, 18 1 4" tall. (Part No: 8N8210) $136.40 [Enlarge Picture] Grille Side Panel - Left - Side panel for left front of tractor. Uses grill insert p n D5NN8151A. For Models: 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5 (Part No: D9NN8A135AA) $144.40 [Enlarge Picture] Grille Side Panel - Right - Side panel for Right front of tractor. Uses grill insert p n D5NN8150A. For Models: 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 9000, 8700, TW10, TW15, TW20, TW5. (Part No: D9NN8A134AA) $144.40 [Enlarge Picture] Grille, Exact Copy - Radiator Grille 'NEW'. Tear Drop Grille Bars. For tractors: 8N {1948-1952}. Made by Dennis Carpenter and is exactly like the Ford original. (Part No: 8N8204DC) $311.19 [Enlarge Picture] Grille, Front, w/ Inset Headlights - For Models: (2000, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3500, 3550, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4500, 5000, 5100 all built between 1 1965 to 12 1974), (2150 from 1 1970 to 12 1974), (3400 from 1 1965 to 9 1975), (4410 from 1 1969 to 12 1974), (5340 from 6 1968 to 12 1974), (7000, 7100, 7200 from 10 1971 to 12 1974). (Part No: D1NN8151B) $58.27 [Enlarge Picture] Hood - Hood panel, engine Left Hand side, vertical exhaust, without cab. 41 3 4 inches long. For 5100, 5110, 5600, 5610, 5900, 6400, 6410, 6600, 6610, 7100, 7600, 7610. (Part No: D5NN16626B) $64.38 Hood - Hood panel assembly, engine Left Hand side with AC. For 2810, 2910, 3910, 4600, 4610SU, 4610, 4100, 4140. (Part No: D7NN16626A) $62.32 [Enlarge Picture] Hood - Includes battery cover. For tractors 9N, 2N, 8N. When used on 9N & 2N also order air cleaner door 8N9661. (Part No: 8N16612) $299.24 [Enlarge Picture] Hood Cowl - 2000, 3000, 4000, 5000, 7000, 5900, 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 5610, 6610, 7610, 230A 231, 334, 335, 340A, B, 420, 445A, 450, 515, 530A, 531, 535, 540A, B, 545A (less Select-o-speed, Dual Power , Cab, Torque Converter). Replaces D8NN16948DB. Hood Cowl. (Part No: D0NN16N627R) $140.94 [Enlarge Picture] Hood Emblem Housing - Fits NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901. Housing holds emblem and connects side pieces of hood. (Part No: 311319) $94.95 [Enlarge Picture] Hood Handle - For Models: Fordson Super Dexta, Super Major. SPECIAL ORDER please allow up to 30 days for delivery. (Part No: DDN16644) $41.82 [Enlarge Picture] Hood Handle - For Models: Fordson Dexta, Major, Power Major. SPECIAL ORDER please allow up to 30 days for delivery. (Part No: E1ADDN16644A) $38.91 [Enlarge Picture] Hood Hinge - THESE FIT AFTERMARKET HOODS ONLY. These will NOT work for original hoods. For Models: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Part No: C5NN16N631B) $12.95 [Enlarge Picture] Hood Latch Spring - For Models: Jubilee, NAA, 501, 600, 700, 800, 900, (2000, 4000 with 4 cylinder gas engines). (Part No: NAA16925B) $14.85 [Enlarge Picture] Hood Panel - Left Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16619) $59.77 [Enlarge Picture] Hood Panel Right - Right Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16618A) $59.77 [Enlarge Picture] Hood Support, Rubber - **ENTER 10 in QTY. Rubber Hood Supports For models: 2100, 2610, 2910, 3055, 3100, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4600, 4610, 4830, 5030, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7600, 7700, 7710, 7910, 8000, 8210, 8700, 9700, TW10, TW15, TW20, TW5. **Must be ordered in quantities of 10.** Priced each. (Part No: C5NN16N655B) $1.02 [Enlarge Picture] Hood, LH - 41.750" long. For Models: 5100, 6600, 6900. (Part No: C7NN16626G) $58.73 Hood, LH - Fits: 3 Cyl Diesel Tractors (4-68 74). No Air Cleaner Hole, No Louvers. For Models: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, ``4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. (Part No: D3NN16626L) $67.36 Hood, RH - 41.750" long. For Models: 5100, 5600, 6600, 7100, 7600. (Part No: D5NN16N768B) $70.79 Hood, RH - For Models: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, ``4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. (Part No: D3NN16625M) $67.36 [Enlarge Picture] Hood, Right Hand - 31" long. For Models: 3600, 3610. Additional $10 shipping due to size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C7NN16625M) $48.72 [Enlarge Picture] Hood, w\ Scripted FORD Logo - Logo is raised laminate (Not Stamped). For Model: 8N. (Part No: 920037) $489.45 Instrument Panel - For Models: 2310, 2600V, 4110, 420, 4400, 4410, 445, 4500, 4610SU, 5100, 5110, 515, 531, 532, 535, 540, 540A, 545, 5600, 5610, 5900, 6600, 6610, 6810, 7100, 7600, 7610, (2110 from 1965 to 1975). (Part No: D8NN16948DB) $168.27 [Enlarge Picture] Insulator, Battery Hold Down Strap - Rubber insulator for 9N10724 battery hold down bar. Fits 9N, Early 2N (1939 to 1942). (Part No: 01A10726) $5.66 [Enlarge Picture] Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K) $104.26 [Enlarge Picture] Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K) $104.26 [Enlarge Picture] Radiator Cover - For Models: 4000, 5000 both after 1968. Does not have hole for Air Cleaner. (Part No: C5NN8N202L) $245.60 [Enlarge Picture] Rubber Hood Pads - **ENTER 10 in QTY. For all models after 1965 with front cowling that surrounds the grill radiator. These rubber pads fit onto cowling under hood. **Must be ordered in quantities of 10.** Priced each. (Part No: C5NN16N655B) $1.02 [Enlarge Picture] Running Boad Bracket, Left Rear - For Models: 8N (above S\N 263843), NAA. (Part No: 8N16487) $34.35 [Enlarge Picture] Running Boad Bracket, Right Rear - Fits 8N (above S\N 263843), NAA. (Part No: 8N16486) $34.32 [Enlarge Picture] Running Board - LH - Fits 8N. 1948-1952. Left hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16473) $164.41 [Enlarge Picture] Running Board - RH - Fits 8N. 1948-1952. Right hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16472) $164.41 [Enlarge Picture] Running Board Bracket - Front - For Models: 8N, NAA, 600, 700, 800, 900, 601, 801, 2000, 4000, all WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket Right OR Left side. Price is EACH bracket. EXACTLY LIKE ORIGINAL. (Part No: 8N16470) $26.72 [Enlarge Picture] Running Board Bracket - Rear/Right - For Model: NAA 1953-1954. Rear Running Board Bracket - Right Side. Bracket Only. Exactly Like Original. (Part No: NAA16486A) $40.08 [Enlarge Picture] Running Board, LH - 20.5" long, 8.5" wide. For Models: 2000, 2600, 3000, 3600, 5600, 6600, 7600. (Part No: D3NN16451D) $54.33 [Enlarge Picture] Running Board, RH - 20.5" long, 8.5" wide. Replaces D4NN16472B. For Models: 2000, 2600, 3000, 3600, 5600, 6600, 7600. (Part No: D5NN16472C) $52.93 [Enlarge Picture] Side Panel - LH - Front left hand lower side panel assembly for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). (Part No: C3NN16653B) $96.09 [Enlarge Picture] Side Panel - RH - Front right hand lower side panel assembly for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964) (Part No: C3NN16652B) $96.09 [Enlarge Picture] Side Panel Bolt Kit - Bolts 2 Per PKG, hood side panel to axle support bolt, nut & washer kit with dog point EXACT OF ORIGINAL. For tractors: 9N, 2N, 8N, {1939-1952}. (Part No: 350782-KIT) $6.90 [Enlarge Picture] Step Plate - Left - For 2N, 9N. Left Hand Step Plate. Includes rear bracket. 24 inches in length. (Part No: 180717M91) $49.98 [Enlarge Picture] Step Plate - Right - For 2N, 9N. Step Plate - Right. Includes rear bracket. 24 inches in length. (Part No: 191929M92) $49.98 [Enlarge Picture] Step Plate Bracket - For 9N, 2N. Step Plate Bracket (right or left) used on Step Plates #180717M91 & #191929M92. (Part No: S.42997) $20.00 Step Plate Set, LH/RH - Fits Dexta, Super Dexta. Includes left & right step plates with bracket(s). Also replaces 957E16472A. (Part No: 957E16473B) $187.04 [Enlarge Picture] Step Plate Set, LH/RH - Fits Fordson Major, Power Major (1952-11 1960). Replaces E1ADKN16472-RH & E1ADKN16473-LH. Includes Left and Right Step Plates. (Part No: S.66749) $176.44 [Enlarge Picture] Step Plate Set, Right & Left Sides - Fits Fordson Power Major, Super Major (12 1960 & newer). Replaces E1ADDN16450A-RH & E1ADDN16451A-LH. (Part No: E1ADDN16450A) $211.71 [Enlarge Picture] Step Plate, LH - Fits: 2000, 2600, 3000, 3600 (1975-76). LEFT Hand side. (Part No: C5NN16451BV) $51.61 [Enlarge Picture] Tool Box - Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685) $29.40 [Enlarge Picture] Tool Box - Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM) $39.72 [Enlarge Picture] Tool Box - Original Style - Tool Box. Ford 8N 1948-1952. Measures approx 11" L x 4.5" H x 5" D (tapers down to 2" D at opposite end). (Part No: 8N17005) $36.60 [Enlarge Picture] Tool Box, Restoration Quality - For Models: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Restoration Quality Tool Box. Fits between Step Plate and Rear Axle Housing. (Part No: NCA17005A) $40.49 [Enlarge Picture]   Steering Axle Hardware Kit 4 PCS. - Bolt kit, front axle bolt, nut & washer. Holds right and left axles to center axle. For tractors: 9N, 2N, 8N {1939-1952}. For 600, 700, 800, 900, NAA (Part No: 350789-KIT) $11.23 [Enlarge Picture] Axle Pin - Front axle pin fts Dexta, Super Dexta. (Part No: 957E3127) $59.96 [Enlarge Picture] Axle Pin, Front - Pin, front axle, heavy duty. 1.750" O.D, 4.71" Long, 4.00" usable length. For the following models built between 7 1958-1964: 600, 700, 800, 900, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. (Part No: 312659) $43.01 [Enlarge Picture] Axle Pin, Threaded - 1.750" O.D., Length is 4.5 in., For Models W All Purpose And LCG Front Axles 1953 Thru 1964. Fits: 600, 601, 800, 801, 2000, 4000. (Part No: NCA3127A) $15.95 [Enlarge Picture] Axle Spacer - For models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Part No: C5NN3N030G) $5.99 [Enlarge Picture] BEARING ASSEMBLY - For Steering column (w o power steering). Tractors: 8N & up (1948 to 1964). (Part No: 8N3517) $22.90 [Enlarge Picture] Ball Bearings, Steering Gear - Package of 20, used with E1ADKN3556 ball race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For Models: Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Part No: 83424343) $7.60 Ball Joint Male - Cylinder end. For Models: 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Part No: E2NN3A540BJ) $24.95 [Enlarge Picture] Bearing And Cup Assembly - For models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft top and bottom. (Part No: 8N3571-52) $8.59 [Enlarge Picture] Bearing Retainer - Steering Shaft Gear Thrust - For Models: 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12 1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $1.99 [Enlarge Picture] Bearing Retainer - Steering Shaft Gear Thrust - For Models: 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $1.99 [Enlarge Picture] Bearing, Steering Shaft - Upper & Lower. For Models: Major, Power Major, Super major. Replaces 353075S. (Part No: E1ADKN3556) $16.80 [Enlarge Picture] Belt - Power steering pump belt. For Models: 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 310050) $11.84 [Enlarge Picture] Bolt, Radius Rod to Front Axle - MINIMUM ORDER IS 2 (order in multiples of 2). Length is 5-1 2in. 5 8 -18 thread. Head OD is 7 8in. Fits the following tractors: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, ``2000 (up to 1964), 4000 (up to 1964). Price shown is for 1 bolt. (Part No: NAA3415B) $8.40 [Enlarge Picture] Bushing - Bushing assembly, upper. For Models: 2600, 3600, 4100, 4600 (4 1976-1981); 5600, 6600, 7600 w manual steering (4 1976-1981);2610, 3610, 4110, 4610, 5610, 6610, 7610 w power steering (1981-3 1985). (Part No: D5NN3517A) $11.98 [Enlarge Picture] Bushing - Bushing, steering gear sector {1-1\2 long}. For tractors: 8N, 8NAN to s\n 216988 {1948-1949}. {4 used} (Part No: 8N3576A) $6.72 [Enlarge Picture] Bushing - Bushing, steering gear sector {.84 long}. For tractors: 8N, 8NAN. NAA, NAB s\n 216988 & up. {2 used} (Part No: 8N3576B) $6.72 [Enlarge Picture] Bushing - Bushing, 1.38 long, for power steering center arm pivot shaft, lower bushing. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3179B) $8.20 [Enlarge Picture] Bushing, Steering Gear, Pitman Shaft - For Models: 8N, NAA 1949-1954. (Part No: 8N3553) $4.49 [Enlarge Picture] Center Arm - Center arm, for power steering pivot shaft For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: D6NN3N670A) $109.32 [Enlarge Picture] Cross and Bearing Kit - A= 1.18", B= 1.18", C= 3.62", D= 3.62". For Models: 5110, 5610, 5610S, 6410, 6610, 6610S, 6810, 6810S, 7010, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210 all w MFWD. Replaces E7NN4635AA. (Part No: 83959516) $58.35 [Enlarge Picture] DRAG LINK -TIE ROD BOOT ASSORTMENT - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16" x 5 8" x 5 8", 1 15 16" x 3 4", 3 4", and 1 3 8" x 1" x 1 2". (Part No: TIERODBOOTS) $15.30 [Enlarge Picture] Drag Link - Drag link for power steering, 50.50" center post to center post. For 5000, 5600, 6600, 7000, 7600, (Part No: E0NN3304CA) $87.90 [Enlarge Picture] Drag Link Assembly - A= 45.25", B= 1.187". For Models: Major, Super Major. (Part No: E1ADDN3304B) $122.04 [Enlarge Picture] Drag Link End - End, rear, Right Hand, 29.625" to center of post, for drag link with power steering. For 2000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, (Part No: C5NN3307G) $79.95 [Enlarge Picture] Drag Link End - End, rear, Left Hand, 28.125" tube length, for drag link with power steering. (2000, 3000 1965 to 1975), 2600, 3600, 4100 (1975 to 1981, less cab), 2610, 3610, 4110 (1981 to 9 1984). (Part No: C5NN3308E) $82.95 [Enlarge Picture] Drag Link End - End, rear, 41.25" to center of post, for drag link with power steering. For 4600, (Part No: D0NN3307A) $67.99 [Enlarge Picture] Drag Link End - End, rear, 1.00"-16, for drag link with power steering 3.75" to center of post. For 5000, 7000, 8000, 8200, 8600, 9000, 9200, 9600, (Part No: E3NN3307AA) $26.95 [Enlarge Picture] Drag Link End - End front, for drag link w\manual steering. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4100, Dexta, Super Dexta. (Part No: 957E3290B) $13.95 [Enlarge Picture] Drag Link End - End, rear, for drag link w\manual steering. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4100, Dexta, Super Dexta. (Part No: 957E3307B) $15.95 [Enlarge Picture] Drag Link End - Fits 8N 48-52 Used on front of drag link. Left Hand Threads. 3.375" long from center of post to end of large thread. Large thread diameter is .687in (11 16in.). (Part No: 8N3270) $9.74 [Enlarge Picture] Drag Link End LH - For models 335, 3000, 3400 ALL with Manual & Power Steering W Non Adjustable Front Axle. Tractor 532, 4410 W Power Steering & Non Adjustable Front Axle. TRACTOR 4000 1965> W Power Steering & Non Adjustable Front Axle. Replaces OEM 81812358. (Part No: C5NN3308F) $118.20 Drag Link End, Rear - RH Threads. For Models: 2N, 8N, 9N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A) $13.90 [Enlarge Picture] Drag Link End, Front - 3.250" long, .750" dia., 16 LH thread. For Models: (600, 800 up to s n 78836 w power steering). (Part No: 309523) $19.23 [Enlarge Picture] Drag Link End, Front - A= 4.00", B= .813", 16 LH thread. For Models: (600, 800 s n 78836 and up). (Part No: 309591) $33.36 [Enlarge Picture] Drag Link End, Front - A= 4.00", B= 13 16", 16 LH thread. For Models: 3000, 335, 3400, 4000, 4410, 532. (Part No: C5NN3A300C) $25.82 [Enlarge Picture] Drag Link End, Front - A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1 62 to 12 64), 4000(1 62 to 12 64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer.``Sold in Qty of 2, priced each. (Part No: NAA3270A) $11.87 [Enlarge Picture] Drag Link End, Front, RH Thread - End assembly, Front, .687-18 Right Hand thread, 3.187in. from center of post to end of large thread. For 2N, 9N. (Part No: 9N3270) $14.74 [Enlarge Picture] Drag Link End, LH - A= 36.44", B= 1.00", .813" dia., 16 UN RH thread. For Models: (600, 800 s n 78836 and up), (2000, 4000, all 4 cylinder s n 78836 and up). Replaces 310083. (Part No: 312871) $132.00 [Enlarge Picture] Drag Link End, RH - A= 34.25", B= 1.00", .813" dia., 16 UN RH thread. For Models: (2000, 4000 all 4 cylinders s n 78836 and up), (600, 800 s n 78836 and up). Replaces 310082. (Part No: 312870) $132.00 [Enlarge Picture] Drag Link End, Rear - A= 40.00" long. For Models: (4000 from 4 1970 to 1975 w manual steering), 4100, (4600 from 8 1970 to 12 1971 w power steering and from 1975 to 1981 w manual steering), (4610 1981 w manual steering). Replaces 81821968. (Part No: C7NN3307A) $51.58 [Enlarge Picture] Drag Link End, Rear, RH - A= 32.00", B= 1.0" w 1.0" threads. For Models: 3000, 335, 3400, (4000 1965 and up), 4410, 532. (Part No: C5NN3307H) $187.04 [Enlarge Picture] Drag Link Tube - 6.120" long. For Models: 600 S N 78836>, 800 S N 78836>. (Part No: 312874) $55.12 [Enlarge Picture] Drag Link Tube - 5.00" long. For Models: 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, NAA All w S N less than 78836. (Part No: C5NN3349A) $28.97 [Enlarge Picture] Drag Link Tube - 34.5" long. Uses one RH and one LH Tie Rod End. For Models: 9N, 2N, (Used on RH side on early 8N & LH side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length..p n 8N33314D drag link tube was also used on 9N, 2N and 8N tractors..it is 32-3 4in. long). (Part No: 8N33315) $29.85 [Enlarge Picture] Drag Link Tube, - 32-3 4in. long. O.D. 0.875. Includes clamps (on each end), For 9N, 2N, 8N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length..p n 8N33315 drag link tube was also used on these tractors..it is 34-1 2 inch long). (Part No: 8N3314D) $49.17 [Enlarge Picture] Drag Link Tube, LH - 33.15" long. For Models: 2000, 3000. (Part No: C5NN3A319A) $66.90 [Enlarge Picture] Dust Cover - Dust cover, steering drag link rear ball joint cover. For tractors: 9N, 2N, 8N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5 8 inch hole, Large end is 1 7 16 inch inside diamter. (Part No: 9N3324) $6.73 [Enlarge Picture] Dust Seal, Steering Arm - For Models: 2000, 3000, 4000, 600, 800, 8N, 900, NAA.Replaces C5NN3125A. (Part No: 8N3528) $3.00 [Enlarge Picture] Filter, Power Steering - Filter case size is 3.1in diameter by 1.44in. height. Hole is approx 1in. diameter, VERIFY size before ordering. Fits: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (w original Ford pump with reservoir on top of pump). (Part No: AE33538A) $9.38 [Enlarge Picture] Filter, Power Steering - For Models: 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. (Part No: F0NN3N976AA) $26.91 [Enlarge Picture] Front Axle Assy W/ Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W Manual 7-57 PS 55), 4000(W Manual 7-57 PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA) $175.93 [Enlarge Picture] Front Axle Pin - For Model: 2N up to s n 167489. (Part No: 2N3126E) $46.38 [Enlarge Picture] Front Axle Pin, Front - Front axle pin, front, manual or power steering. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N159A) $45.22 [Enlarge Picture] Front Axle Pin, Rear - 1.250" OD, 5.150" long, manual or power steering. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N160A) $26.26 [Enlarge Picture] Front Axle Support - For Models: 2000, 3000, 4000 SU (65 7-70). Shipping of this item is $50.00. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: C5NN3A042G) $236.28 Front Axle Support - For Models:(5000 from 9 1970 and up), 7000, 5600, 5900, 6600, 7600, 5610, 6610, 7610. This part must ship truck freight call for quote. (Part No: E5NN3029BA) $594.51 [Enlarge Picture] Front Axle Support - For Models: 2000, 3000, 4000SU after 8 1970, 2600, 3600, 3900, 4100, 4600SU, 231, 531 after 1975, 2610, 3610, 3910, 4110, 4610SU. There will be an additional shipping charge of $50.00 due to weight and size of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D3NN3A042D) $605.57 [Enlarge Picture] Front Axle Support Bushing - Brass Bushing For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778" I.D., 1.913" O.D., 1.5" L (not for heavy, industrial, or grove axles). (Part No: 2N3039) $6.98 [Enlarge Picture] Front Axle, LH - Left Hand Side. Fits the following tractors manufactured 8\1970 & newer: 2000, 2100, 3000, 3055, 3100, 3120. $10 Added to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C7NN3007J) $158.09 [Enlarge Picture] Front Axle, LH - Without Radius rod hole. For Models: (2000, 2100, 3000, 3055, 3100, 3120 all 1965 thru 7 1970). (Part No: C5NN3007G) $157.63 [Enlarge Picture] Front Axle, RH - Right Hand Side. Fits the following tractors manufactured 8 1970 & newer: 2000, 2100, 3000, 3055, 3100, 3120. $10 Added to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C7NN3006J) $158.09 [Enlarge Picture] Front Axle, RH - Without radius rod hole. For Models: (2000, 2100, 3000, 3055, 3100, 3120 all 1965 thru 7 1970). (Part No: C5NN3006G) $157.63 [Enlarge Picture] Front Socket - End, front, 1.00"-16, Left Hand threads, 3.75" to center of post, for original style drag link with threaded ends & manual steering. For 5000, 7000, (Part No: C5NN3308C) $25.62 [Enlarge Picture] Front Socket - End, front, for drag link w power steering. For 2000, 2600, 2610, 3000, 3600, 3610, 4100, (Part No: C5NN3A300B) $22.95 [Enlarge Picture] Front Socket - Drag Link End, front, 9.00" to center of post for drag link with manual or power steering. For Models: 4000, 4600. (Part No: D0NN3A300A) $32.95 [Enlarge Picture] Front Socket - End, front, 8.75" to center of post, for drag link w manual or power steering. For 4610, (Part No: E1NN3A300AA) $25.95 [Enlarge Picture] Front Socket - End, front, 1.00"-16, Left Hand threads for drag link with power steering, 3.75" to center of post. For Models: 5000, 7000. (Part No: E3NN3308BA) $27.06 [Enlarge Picture] Front Spindle - For early 9N without keyway in vertical shaft. Reversible, left or right. (Part No: S.61380) $158.26 Front Spindle - Right Hand Spindle For 9N, 2N. Heigth of spindle shaft is 11 inches. Keyway on inside is 5 16 inches. Notch on outside of shaft. (Part No: 2N3105) $58.01 [Enlarge Picture] Front Spindle - Left Hand Spindle For 9N, 2N. Heigth of spindle shaft is 11 inches. Keyway on inside is 5 16 inches. Notch on outside of shaft. (Part No: 2N3106) $58.01 [Enlarge Picture] Gasket, Steering Gear Housing, Front - For Models: 2N, 9N 1939-1947. (Part No: 9N3594) $3.81 [Enlarge Picture] Gasket, Steering Gear Housing, Rear - For Models: 2N, 9N 1939-1947. (Part No: 9N3593B) $3.81 [Enlarge Picture] Grommet - Steering column, fits around column at dash. For tractors: NAA, Jubilee {1953-1954}. (Part No: NAA3578B) $13.64 [Enlarge Picture] Grommet - Grommet, steering column to instrumental panel. For tractors: 8N {1948-1952}. (Part No: 8N3578) $5.59 [Enlarge Picture] HD Power Steering Cylinder Assm, LH - Power steering cylinder, LH. For dual cylinder applications on utility and industrial models. Industrials: 340, 340A, 340B, 540, 540A, 540B (4 1981-11 1988), 445, 445A, 450, 545, 545A (10 1978-11 1988), 345C, 445C, 545D (9 1992 & up). (Part No: D8NN3A540AB-HD) $343.49 [Enlarge Picture] King Pin Repair Kit - Will fix both spindles. Kit contains 2 of each of the following 2N3109 spinrdle bushing, NCA3110A spindle bushing, C0NN3123B thrust bearing, C5NN3125A spindle seal. For Models: 600, 800, 601, 801, (700, 900, 701, 901, 2000, 4000 all rowcrop w wide front end except hi-clearance). (Part No: S.65107) $32.04 [Enlarge Picture] King Pin Repair Kit - Fixes both spindles. For Models: Dexta, Super Dexta. (Part No: S.65106) $32.04 [Enlarge Picture] King Pin Repair Kit - Fixes both spindles. For Models: Major, Power Major, Super Major. (Part No: S.65737) $46.07 [Enlarge Picture] Manual & Power Steering Gear Assembly - Fits tractor: With manual steering 1965-8 70. Will work for Power Steering on those models with an external power steering cylinder from the steering box and other fittings may need to be purchased which we do not carry. Fits Industrials: 3500, 3550, (420 w P.S.) Also replaces OEM# D7NN3503C. (Part No: E0NN3503CA) $599.12 [Enlarge Picture] Manual Steering Shaft & Nut Assembly - For Models: 2000, 3000, 2600, 3600. Manual Steering Shaft & Nut Assembly. (S.65156) (Part No: D2NN3A710B) $109.90 [Enlarge Picture] Nut - Nut, steering wheel retaining. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. (Part No: D5NN3N602A) $7.88 [Enlarge Picture] Pin Front Axle - Front axle pin, manual or power steering. O.D. 1.750" I.D. 1.125", L 4.960". For Models: 2000, 3000. (Part No: C5NN3127B) $37.56 [Enlarge Picture] Pin Front Axle - Front axle pin, manual or power steering. For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4100, 4110. (Part No: C7NN3127D) $44.99 [Enlarge Picture] Pin Front Axle - Pin, front axle unthreaded. OD 1.743", ID 1.310", L 4". For NAA, Jubilee. (Part No: NAA3126B) $31.98 [Enlarge Picture] Pin, Front Axle - OD 1.743in, ID 1.310in, L 4in. For models: 9N, 2N (s n 164489 & up), 8N. (Part No: 2N3126D) $21.95 [Enlarge Picture] Pin, Radius Rod to Front Axle - For Model: 8N 1948-52. (Part No: 357623S8) $5.95 [Enlarge Picture] Pitman Arm (LH/RH) - Steering Gear Pitman Arm for models 8N (SN 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743) $85.27 [Enlarge Picture] Power Steering - PUMP with Reservoir. For Models: 2100, 2110, 3100, 4100, 4110, 4500, 5100, 7100. (Part No: R4103) $748.44 [Enlarge Picture] Power Steering - PUMP with Reservoir Use with O-Ring Fittings For 2830, 2930, 3930, 4130, 4630, 4830, 5030. Replaces OEM # F1NN3K514BA99. (Part No: R4104) $628.32 [Enlarge Picture] Power Steering - Pump with reservoir use with flair fittings for 4100, 4600, 4610, 4630, 5100, 5600, 5610, 5900, 6600, 6610, 7100, 7600, 7610. Replaces E6NN3K514PA99. (Part No: R4106) $519.79 [Enlarge Picture] Power Steering - Pump with reservoir without relief valve. For Moedels: 5110, 5610, 5900, 6410, 6610, 7010, 7610, 8010. OEM# E4NN3K514AB, E6NN3K514AA, E6NN3K514AB. (Part No: R3565) $299.37 [Enlarge Picture] Power Steering - Pump with Reservoir. For Models: 6700, 6710, 7700, 7710, 7810, 7910, 8210. (Part No: R4107) $656.70 [Enlarge Picture] Power Steering - PUMP with Reservoir with Barbed Return Fitting For 8000, 8600, 8700, 9000, 9600, 9700, TW-5, TW-10, TW-15, TW-20, TW-25. Also replaces D7NN3K514G. (Part No: E0NN3K514AB) $660.01 [Enlarge Picture] Power Steering - PUMP with Reservoir with Pipe Return Fitting For 8000, 8700, 9700, TW-10, TW-20 (Part No: R4109) $791.29 Power Steering - PUMP without Reservoir For 8000, 8600, 8700, 9000, 9600, 9700 (1968-2 1973) (Part No: R4110) $766.92 Power Steering - PUMP with Reservoir For 9700 (From 8 1976), TW-30, TW-35. OEM# D8NN3K514JD (Part No: R4111) $685.00 [Enlarge Picture] Power Steering Ball Joint - Cylinder end with 7 16" internal threads. For OEM & Tisco power steering cylinders E2NN3A5AOBA with 1 2" dia. rod and D4NN3A54OA with 5 8" dia. rod. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 4600, 530A, 531, 601, 801, (Part No: C5NN3A302B) $26.60 [Enlarge Picture] Power Steering Ball Joint, Female - Power Steering Cylinder Ball Joint female end with 11 16" internal threads. End screws onto rod. For TISCO universal power steering cylinders D8NN3A540AB-HD and D8NN3D547AB-HD. (Part No: D8NN3A540BJF) $15.00 [Enlarge Picture] Power Steering Block - Gear Adapter Block For 2000, 3000, 4000SU, 2600, 3600, 3900, 4600SU, (2310, 2610, 2910, 3610, 3910, 4610SU 1981-9 1984). (S.61625) (Part No: D9NN3N748AA) $157.74 [Enlarge Picture] Power Steering Conversion Kit - For Ford 4 cylinder gas and diesel: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 2000, 4000. Cannot be used with Front End Loaders. Not for RowCrop models. Kit includes all parts necessary for conversion (items shown in picture) including power steering pump, belt & pulley, hydraulic control arm etc. Made in U.S.A. (Part No: S.60305) $1318.00 [Enlarge Picture] Power Steering Cylinder - Power steering cylinder with 5 8" dia. rod, 1 2" dia. threaded outer end. For 335, 3400, 4110, 532. Replaces, C5NN3C578B. (Part No: C5NN3A739G) $221.85 [Enlarge Picture] Power Steering Cylinder - Power steering cylinder is 14 1 4 inches long with 1 2" dia. rod, 7 16" dia. threaded outer end. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 530A, 531, 601, 801, (Part No: E2NN3A540BA) $209.90 [Enlarge Picture] Power Steering Cylinder, 2 WD - For Models: 5900, (5610, 6610, 6810, 7610, 7810 4 1985 and up), (5610S, 6610S, 7610S, 7810S 1 1994-5 1996). (Part No: E3NN3A540BA) $353.59 [Enlarge Picture] Power Steering Hose - Single wire braid hose with fittings; 35" long. For 600, 800, NAA, (Part No: FPH34) $26.46 [Enlarge Picture] Power Steering Hose - Hose is .750" 1 wire braid, 34.250" long, fittings 180 degree offset ends. For Models: 600, 620, 630, 640, 650, 660, 800, 820, 840, all 1957 and newer. (Part No: VPJ4034) $29.90 [Enlarge Picture] Power Steering Hose - Replaces steel line that runs from pressure control valve to cylinder outlet. For Models: 2000, 4000, 600, 700, 800, 900. (Part No: 45A1) $24.77 [Enlarge Picture] Power Steering Hose - Single wire, braid hose assembly with fittings, overall length 31". For Models: 2000, 2600, 2610, 3000, 3600, 3610, 4000, 600, 700, 800, 900. (Part No: FPH30) $30.36 [Enlarge Picture] Power Steering Hose Assembly - Flexible power steering hose designed to replace regrid Ford tube assemblies. 54" long, 3 8" I.D. SAE 100 R1A single wire braid hose with 5 8"-18 thread 45° SAE flare female swivel on one end, 5 8"-18 thread SAE straight inverted flare on other. For Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. (Part No: FPH54) $31.20 [Enlarge Picture] Power Steering Hose, Pressure - Alternative to original steel lines. For Models: (5000 up to 9 1970), 7000, 5600, 6600, 7600. (Part No: D8NN3A562AA) $51.83 Power Steering Kit - For Ford 5000. Kit Includes Oil reservoir, pump, hyraulic steering assembly , hoses and simple instructions. Not to be used with front end loaders. (Part No: S.60749) $566.28 [Enlarge Picture] Power Steering Kit - For Ford 2000, 2600, 2610, 3000, 3600, all with 3 Cylinder engines. Will not work with Front Loaders. (Part No: S.60747) $614.25 [Enlarge Picture] Power Steering Kit - For 2000, 3000, 2600, 3600 = All 3 cylinder 1965 and up. Orbital Motor Add-On Power Steering Kit. Can be used with front loaders. Includes steering Wheel, hydraulic ram, hoses, pump etc. (Part No: S.66852) $1318.68 [Enlarge Picture] Power Steering Pump - For Models: 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. (Part No: E7NN3K514CA) $405.99 [Enlarge Picture] Power Steering Pump - Used with flair fitting on models using steering gear box, pump has relief valve. For Models: 4100, 4600, 4610, 4630, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. (Part No: E6NN3K514PA99M) $392.33 [Enlarge Picture] Power Steering Pump - For Models: 5530, 6530, 7530. (Part No: 5113130) $311.85 Power Steering Pump - For Models: 8530, 8630, 8730, 8830, TW30, TW35. Replaces D8NN3K514JD, 83924997, 81871789. (Part No: D8NN3K514JC) $633.33 [Enlarge Picture] Power Steering Pump - For (2000, 3000, 4000, 4500, 5000 all 1965-1974)(3055, 4140 all 1970-1974)(3150 1970- 11 1975)(3500 1965-1971)(7000 10 1971-1974). Power Steering Pump. (Part No: D8NN3K514KC) $855.55 [Enlarge Picture] Power Steering Pump - For 2000, 3000, 4110 (1965-9 1968), 3400, 4410 (1965-4 1970). Power Steering Pump with External Reservoir. 650 PSI, 3.5 GPM. 61316S (Part No: C7NN3A674C) $571.46 [Enlarge Picture] Power Steering Pump - For 4400 1965-4 1970, 5000, 5100 1965-9 1968. Power Steering Pump with external reservoir. Will not fit High Clearance. 1100 PSI, 3.5 GPM. 60657S (Part No: C7NN3A674D) $708.45 [Enlarge Picture] Power Steering Pump - For Models: 5000 1965-9 1968, 4200, 5200, 7200 Rowcrop 1966-1973. Power Steering Pump with external reservoir. 1100 PSI, 3.5 GPM. 61186S (Part No: C7NN3A674G) $604.85 [Enlarge Picture] Power Steering Pump - For 3500, 3550 51970 and up, 5100, 7100 7 1970 and up, 4100 4 1970 and up, 4600, 5600, 6600, 7600 5 1981 and up, 5610, 6610, 7610 4 1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. Set at 650 PSI to fit: 2000, 3000 10 1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. Pressure setting at 850 PSI to fit: 4000 (10 1968-3 1970), 2600, 3600, 4110 with cab. (Part No: E6NN3K514EA) $328.09 [Enlarge Picture] Power Steering Pump Repair Kit - For Models: 2000, 2600, 2610, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: DHPN3A674B) $11.49 [Enlarge Picture] Power Steering Pump, old style - For Models: 600-900, 601-901, 2000-4000 all with gas engines before 1965. Old Style Power Steering Pump. THIS IS NOT AN OEM REPLACEMENT AND WILL NOT LOOK LIKE ORIGINAL PUMP. This is a gear type pump that replaces the roller vane pump #C3NN3A691B. (Part No: S.61085) $611.47 [Enlarge Picture] Power Steering Seal Kit - Orbital control valve and gear box gasket and seal kit. For Models: (4000, 5000 from 7 1970 and up), 4600, 5600, 6600, 7000, 7600. Replaces EGPN3N503AA. (Part No: EDPN3500A) $12.72 [Enlarge Picture] Power Steering Shaft & Ball Nut Assembly After 1964 - Fits: 2000, 3000, 4000SU, 2600, 3600, 4100, 4600SU, (2310, 2610, 2910, 3610, 3910, 4110, 4610SU ALL UP TO 9 1984), INDUSTRIALS: 230A, 231, 234, 2110LCG, 334, 335, 3400, 4110LCG, (530A UP TO 9 1984), 531, 532. (Part No: D6NN3A710A) $217.80 [Enlarge Picture] Power Steering Shaft & Nut Assembly Before 1965 - For Models: 601, 801, 2000, (4000 up to 1965). Power Steering Shaft & Nut Assembly. (Part No: 310859) $233.88 [Enlarge Picture] Power Steering Valve Assembly - For Models: 2000, 3000, 4000SU, 2600, 3600, 3900, 4100, 4600SU, (2310, 2610, 2910, 3610, 4110, 4610SU >9 84), 2110LCG, 3400, 230A, (231 > 9 84), 334, 335, 530A, 531, 532. (Part No: C5NN3A730B) $637.85 [Enlarge Picture] Power Steering, Cylinder Repair Kit - Kits Are For Repairing Only A & I Products Power Steering Cylinders- Consists Of: 6 o-rings, 2 Wiper rings, Piston Seal. For Models: 2000, 230A, 231, 234, 3000, 335, 3600, 4600, 531, 601, 801. (Part No: E2NN3A540SK) $25.66 [Enlarge Picture] Radius Rod - For NAA, Jubilee, 600 Series, 800 Series, 2000, 4000. Measures 39.5 inches in length. (Part No: NAA3405) $119.97 Radius Rod Assembly - Right or left hand, 37.75" length. For Models: (2310, 3310, 2000, 3000 all 1965-7 1970 w manual steering except 2310). (Part No: C5NN3405A) $125.50 [Enlarge Picture] Radius Rod Assembly - Right or left hand, 39.62" long. For Models: (2310, 3310, 2000, 3000 all 8 1970 and up w manual steering except 2310). (Part No: C7NN3405C) $122.11 [Enlarge Picture] Radius Rod Assembly - Right or left hand. For Models: (2600, 3600, 3900, 4600SU, 4100 all 1 1975 and up L cab w power steering), (2610, 2910, 3610, 3910, 4610SU all 1-1981 to 9 1984 L cab w pwer steering), (2000, 2100, 2110, 3000, 3100, 4000, 4110, 4140 all 8 1970 and up w power steering). (Part No: C7NN3405B) $158.91 [Enlarge Picture] Radius Rod, Ball Socket - For Models: 2000, 3000, 4000. (Part No: E0NN3N442BA) $17.96 [Enlarge Picture] Radius Rod, Socket Cap - For Models: 2000, 3000, 4000. Replaces 313319. (Part No: E0NN3N406BA) $12.56 [Enlarge Picture] Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D power steering pumps. For Models: 231, 233, 2600, (3500, 3550 5 1970 to 1975), 3600, (4100 4 1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7 1970 to 1975). (Part No: D2NN3A006B) $4.96 [Enlarge Picture] Rod Pivot - Pivot for hydraulic control valve handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: C9NND912A) $21.60 [Enlarge Picture] SPINDLE KIT, COMPLETE - Spindle repair kit complete with spindle and finished bushings. 1.13"pin. For 1801, 4040, 58 64. (Part No: S.75076) $427.31 [Enlarge Picture] SPINDLE KIT, COMPLETE - Spindle repair kit Less spindle with unfinished bushings. 1.13 pin. For 1801, 4040, 58\64. (Part No: S.75082) $80.10 [Enlarge Picture] SPRING SEAT - For steering column bearing (w o power steering). Tractors: 8N & up (1948 to 1964). (Part No: 8N3518) $5.90 [Enlarge Picture] Seal, Spindle Pin - For Models: 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. Must order in Quantities of 4, Priced each. (Part No: TDBA3125A) $10.22 [Enlarge Picture] Seal, Steering Column - Felt Dust for top of steering column. Tractors: 8N, NAA (1948-1954). (Part No: 8N3570) $2.90 [Enlarge Picture] Seal, Steering Gear, Sector Shaft - This is a replacement for the original Packing 8N3581 and the packing retainer 8N3591 on the 8N and NAA. For Models: 8N s n above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B) $6.16 [Enlarge Picture] Shaft - Pivot shaft for center power steering arm, 4.28" long. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N703C) $31.84 [Enlarge Picture] Shaft and Pinion Assembly - Fits 9N and 2N tractors 1939-47. Contains shaft and pinion only. For complete set use Part # SGS3. (Part No: 9N3525) $72.75 [Enlarge Picture] Spindle / King Pin Repair Kit - For 8N, 2N, 9N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986) $35.56 [Enlarge Picture] Spindle Bushing - FORD Spindle Bushing - 1.250inch I.D., 1.370inch O.D., 1.500inch Long Fits Models 2N 39-47, 8N 48-52, 9N, NAA 53-54, Jubilee.`` MINIMUM QTY OF 4, PRICED EACH. (Part No: 2N3109) $5.14 [Enlarge Picture] Spindle Bushing Kit - For Models: 5000, 5600, 5610, 6600C, 6600, 6610, 6710, 7000, 7600C, 7600, 7610, 7710. (Part No: SBK6581) $23.24 [Enlarge Picture] Spindle Bushing Kit - Spindle Bushing kit contains: 2 upper p n 2N3109 and 2 lower NCA3110A bushings. For Models: 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 900, DEXTA, SUPER DEXTA. (Part No: SBK5364) $17.56 [Enlarge Picture] Spindle Nut - Fits on front spindles. Castle Nut 3 4in. x 16UNF. Fits: 9N, 2N, 8N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36) $1.14 [Enlarge Picture] Spindle Repair Kit, With Spindle - 1.23" pin, with spindle, finished bushings. For Models: 7010, 8010, 250C, 260C, 340B, 345C, 345D, 445A, 445C, 445D, 450, 540B, 545A, 545C, 545D, 555A, 555B, 655A. (Part No: S.75083) $313.25 Spindle Right Hand/LH - Spindle, Left Hand or Right Hand, vertical shaft 9.40" long. For 6640, 7740, (Part No: E9NN3105CB) $56.98 [Enlarge Picture] Spindle Right Hand/LH - Spindle, Left Hand or Right Hand, vertical shaft 12" long. For Models: 5640, 6640, 7740, 7840. (Part No: E9NN3105EB) $169.90 [Enlarge Picture] Spindle Thrust Bearing - For Models: 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, Jubilee, SUPER DEXTA. (Part No: C0NN3123B) $7.55 [Enlarge Picture] Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B) $78.76 [Enlarge Picture] Spindle, Front - Left Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3106B) $78.76 [Enlarge Picture] Spindle, LH - For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses bushing kit SBK6581. Uses Front Wheel Hub Part # C9NN1104D. Also uses Wheel Bearing Kit Part # WBKFD6. (Part No: C5NN3106J) $99.44 [Enlarge Picture] Spindle, LH - For Model: 4000. (Part No: C5NN3106N) $92.19 [Enlarge Picture] Spindle, LH - For Models: 4600, 4610. (Part No: D4NN3106A) $105.08 [Enlarge Picture] Spindle, LH - For Models: 5700, 6700, 6710, 7700, 7710, 7910, 8210. (Part No: D5NN3106F) $195.79 [Enlarge Picture] Spindle, LH - For Models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Uses bushing kit SBK5364. (Part No: NCA3106B) $75.77 [Enlarge Picture] Spindle, LH - Left hand spindle fits Fordson Major, Power Major and Super Major. A=7.5in, B=1.5in., C=1.5in, D=0.87in. (Part No: E1ADKN3108) $148.90 [Enlarge Picture] Spindle, LH - Dim. A= 8.875", Dim. B= 1.180", Dim. C= 1.376", Dim. D= 1.181", Dim. E= .938". For Models: 1300 1 79 and newer, 1310 1 83 and newer, 1500 1 79 and newer, 1510 1 83 and newer. All 2WD. (Part No: SBA330310760) $128.44 [Enlarge Picture] Spindle, LH - A= 15.937", B= 1.498", C= 1.638", D= 1.748", E 1.624", F= .842". For Models: 5200 used w 7.50x18x16 front tires, 6600C used w 10.00x16 front tires, 7200 used w 7.50x18x16 front tires, 7600C used w 10.00x16 front tires. (Part No: D2NN3106B) $239.90 [Enlarge Picture] Spindle, LH - 5 16" x 1-3 8" keyway. For Models: (2000 1965-1975 except vineyard), 2600, 3000, 3600, 3900, 4100, 4600SU. Replaces F2NN3106AA. Uses bushing kit SBK5364. (Part No: C5NN3106R) $75.63 [Enlarge Picture] Spindle, LH - For Model: 2110. (Part No: SBA330310850) $69.16 [Enlarge Picture] Spindle, LH - A= 10.812", B= 45 splines, C= 1.375", D= 1.377", E= .983". For Models: (1700, 1900 2WD from 1 1979 up), 1710 2WD from 1 1983 and up, 1910 w 60" axle 2WD, 2110 w 60" axle 2WD. (Part No: SBA330310780) $236.96 [Enlarge Picture] Spindle, LH - For Models: DEXTA, SUPER DEXTA. Uses bushing kit SBK5364. (Part No: 957E3106) $75.77 [Enlarge Picture] Spindle, LH, Front - Vertical shaft 7.750". For Models: FMD, Major, Power Major. (Part No: E1ADKN3106) $159.90 [Enlarge Picture] Spindle, LH, Front - Vertical shaft 11.75". For Models: 2310, 2610, 2910, 3610, 3910, 4110, 4610SU. (Part No: E0NN3106AA) $132.06 [Enlarge Picture] Spindle, RH - For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses bushing kit SBK6581. Uses Front Wheel Hub Part # C9NN1104D. Also uses Wheel Bearing Kit Part # WBKFD6. (Part No: C5NN3105M) $99.44 [Enlarge Picture] Spindle, RH - A= 11.687", B= 1.250", C= 1.340", D= 1.250", E= .750". For Models: (2000 1965-75 except vineyard), 2600, 3000, 3600, 3900, 4100, 4600SU. Replaces F2NN3105AA. Uses bushing kit SBK5364. (Part No: C5NN3105U) $79.52 [Enlarge Picture] Spindle, RH - For Models: 4600, 4610. (Part No: D4NN3105A) $105.08 [Enlarge Picture] Spindle, RH - For Models: 5700, 6700, 6710, 7700, 7710, 7910, 8210. (Part No: D5NN3105F) $194.85 [Enlarge Picture] Spindle, RH - For Models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Uses bushing kit SBK5364. (Part No: NCA3105B) $75.77 [Enlarge Picture] Spindle, RH - Right hand spindle fits Fordson Major, Power Major and Super Major. A=7.5in, B=1.5in., C=1.5in, D=0.87in. (Part No: E1ADKN3107) $149.68 [Enlarge Picture] Spindle, RH - Dim. A= 8.875", Dim. B= 1.180", Dim. C= 1.376", Dim. D= 1.181", Dim. E= .938". For Models: 1300 1 79 and newer, 1310 1 83 and newer, 1500 1 79 and newer, 1510 1 83 and newer. All 2WD. (Part No: SBA330310770) $128.44 [Enlarge Picture] Spindle, RH - A= 15.937", B= 1.498", C= 1.638", D= 1.748", E 1.624", F= .842". For Models: 5200 used w 7.50x18x16 front tires, 6600C used w 10.00x16 front tires, 7200 used w 7.50x18x16 front tires, 7600C used w 10.00x16 front tires. (Part No: D2NN3105B) $224.39 [Enlarge Picture] Spindle, RH - For Model: 2110. (Part No: SBA330310840) $69.16 [Enlarge Picture] Spindle, RH - A= 10.812", B= 45 splines, C= 1.375", D= 1.377", E= .983". For Models: (1700, 1900 2WD from 1 1979 up), 1710 2WD from 1 1983 and up, 1910 w 60" axle 2WD, 2110 w 60" axle 2WD. (Part No: SBA330310790) $236.96 [Enlarge Picture] Spindle, RH, Front - Verticle shaft 7.750". For Models: FMD, Major, Power Major. (Part No: E1ADKN3105) $159.90 [Enlarge Picture] Spindle, RH, Front - Vertical shaft 11.75". For Models: 2310, 2610, 2910, 3610, 3910, 4110, 4610SU. (Part No: E0NN3105AA) $132.06 [Enlarge Picture] Spindle, RH/LH - A= 14.875", B= 1.499", C= 1.687", D= 1.312". For Models: 1120, (1130, 1630, 1830, 2030, 2130 all s n up to 242099), 2020, 2120, (3030, 3130 up to s n 186269), 3120. (Part No: AL19730) $138.46 [Enlarge Picture] Spindle, Right Hand - For 4000. (Part No: C5NN3105T) $68.95 [Enlarge Picture] Spindle, Right Hand - For Models: DEXTA, SUPER DEXTA. Uses bushing kit SBK5364. (Part No: 957E3105) $75.77 [Enlarge Picture] Spring, steering column bearing. - Spring, steering column bearing. Tractors: without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520) $4.90 [Enlarge Picture] Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799) $58.39 [Enlarge Picture] Steering Arm Right Hand - For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700. Right Hand steering arm used with D2NN3105C, C5NN3105M, C7NN3105D. (Part No: C5NN3130J) $45.00 [Enlarge Picture] Steering Arm, LH - Left hand arm fits: Fordson Major, Power Major, Super Major. (Part No: E1ADKN3133B) $69.68 [Enlarge Picture] Steering Arm, LH - For Models: 4000, 4100, 4330, 4340. (Part No: C5NN3131C) $139.86 [Enlarge Picture] Steering Arm, RH - For Models: 1700, 1710, 1900, 1910, 2110. (Part No: SBA334520250) $51.61 [Enlarge Picture] Steering Arm, RH - Right hand steering arm fits Fordson Major, Power Major and Super Major. (Part No: E1ADKN3132) $44.40 [Enlarge Picture] Steering Arm, RH - For Models: 4000, 4100, 4330, 4340. (Part No: C5NN3130C) $99.70 [Enlarge Picture] Steering Box, Drop Arm - For Models: 231 1975-1981 w manual steering w o cab, 233 1975-1981 w manual steering w o cab, 2600 1975-1981 w manual steering w o cab, 2810 10 1984-2 1990 w manual or power steering, 2910 10 1984-2 1990 w manual or power steering, 333 1975-1981 w manual steering w o cab, 3600 1975-1981 w manual steering w o cab, 3900 1975-1981 w manual steering w o cab, 4100 1975-1981 w manual steering w o cab, 4110 10 1984-2 1990 w manual or power steering, 531 1975-1981 w manual steering w o cab. (Part No: E4NN3590AA) $63.79 [Enlarge Picture] Steering Column Collar - For 9N, 2N. Collar, retains dust seal in top of column. Exactly Like Original. WITHOUT GREASE FITTING HOLE. (Part No: 9N3669A) $7.59 [Enlarge Picture] Steering Column Collar w/Grease Fitting Hole - For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B) $7.58 [Enlarge Picture] Steering Column Dust Seal - For Models: 9N, 2N. 1939-1957. (Part No: 9N3660) $5.08 [Enlarge Picture] Steering Column Grommet - For models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2 7 8 OD X 1 1 4 ID. (Part No: D2NN3A566B) $8.99 [Enlarge Picture] Steering Column Grommet - Models: 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cyl 1955-1964), 1801. (Part No: NCA3578A) $8.00 [Enlarge Picture] Steering Column Retainer and Spring - For 9N, 2N. Steering Column Dust Seal and Spring. Exactly Like Original Spring and Seal. (Part No: 9N3699-9N3661) $8.95 [Enlarge Picture] Steering Column Shim Kit - 2"x .005", 2"x .010", 2"x .020". For Models: 8N w 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623) $20.26 [Enlarge Picture] Steering Gear Assembly - Complete manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. (Part No: S.67077) $606.48 [Enlarge Picture] Steering Gear Assembly - Complete manual steering gear assembly fits: NAA, Jubilee. (Part No: S.67078) $579.90 [Enlarge Picture] Steering Gear Assembly - Manual Steering Box Assembly Fits: 2000, 2600, 2610, 3000, 3600, 3610, 4110LCG all after 1965. Replaces E4NN3503CA. (Part No: E0NN3503AA) $448.50 [Enlarge Picture] Steering Gear Assembly - For Models: 5000 (1965-8 1970) w Power Steering. (Part No: C5NN3503E) $582.12 [Enlarge Picture] Steering Gear Assembly, Manual - Manual steering assembly fits: 5000, 5600, 5610, 5900, 6600, 6610, 7600. (Part No: D7NN3503A) $595.00 [Enlarge Picture] Steering Gear Set - Fits 9N and 2N tractors 1939-47. Set contains one each of 9N3525 Shaft and pinion assembly, 9N3526 steering sector, right hand, and 9N3527 steering sector, left hand. (Part No: SGS3) $357.11 [Enlarge Picture] Steering Gear, Ball Bearing - 3 8" ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903) $.63 [Enlarge Picture] Steering Gear, Double Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67671) $63.78 Steering Gear, Inner Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67672) $9.60 Steering Gear, Outer Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67673) $19.72 Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67668) $120.48 Steering Gear, Single Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67670) $63.78 Steering Motor - For models 5610, 6610, 6810, 7610, 5610S, 6610S, 7610S, 7810S, 5900. Replaces OEM 86602590. (Part No: E4NN3A244AA) $714.15 [Enlarge Picture] Steering Rocker Shaft Oil Seal - Oil seal, inner for rocker shaft. For Models: 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, MAJOR, SUPER MAJOR. (Part No: DDN3539) $8.06 [Enlarge Picture] Steering Sector - Left Hand - Left Hand steering sector shaft (single gear) 5 tooth, For (8N s n 216989 and up), NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 tooth, you can use this part but must replace both right and left. Shaft cover must be (late style), see picture. (Part No: 251293) $141.17 [Enlarge Picture] Steering Sector - Right Hand - Has single gear (gear has 3 teeth followed by a wider spacer - followed by another 4 teeth ). Fits 8N s n 216989 & up, NAA, Jubilee, 3600, 800, 601, 901, 2000, 4000, (1953 ->1964). If yours does not have 7 teeth, you can use this part but must replace both right and left sides. Shaft cover must be (late style), see picture. (Part No: 251294) $144.38 [Enlarge Picture] Steering Sector Gear (LH) - For models 9N, 2N. (Part No: 9N3527) $138.50 [Enlarge Picture] Steering Sector Gear (RH) - For models 9N, 2N. (Part No: 9N3526) $138.50 [Enlarge Picture] Steering Sector Gear Bushing - For models 9N, 2N. Price is for pair. Two halves needed per side. 2 pairs needed per tractor. Order 2 for complete tractor. (Part No: 9N3517) $15.92 [Enlarge Picture] Steering Sector Kit - Kit conatains Adjuster bolt, nut, washer, o-Rings, shims, felt seal. (Adjuster bolt is allen head type, not slotted like original). For models (8N 50-52), jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109) $18.55 [Enlarge Picture] Steering Sector Shaft Packing - 4 required per tractor. Sold in quantities of 2 pieces, minimum order is 2 pieces. Price shown is for 1 piece. For Models: 9N, 2N 1939-1947. (Part No: 9N3670) $4.11 [Enlarge Picture] Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For Models: NAA, 8N 1948-1954. (Part No: 8N3586) $3.38 [Enlarge Picture] Steering Shaft - Shaft is 24in. long. Fits Fordson (Major, Power Major, Super Major from 1 1952 to 8 1958). (Part No: E1ADKN3524B) $154.50 [Enlarge Picture] Steering Shaft - Double pitman, 8 tooth, 36 spline, 9.125" long. Replaces C5NN3N576A. For Models: 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600. (Part No: C7NN3N576A) $183.70 [Enlarge Picture] Steering Shaft - For both manual or power steering applications with SINGLE PITMAN shaft containing five teeth. For Models: 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532, 3350. Replaces C5NN3N575A. (Part No: C7NN3N575A) $224.26 [Enlarge Picture] Steering Shaft - Steering Shaft (25 7 8" LONG). Fits Fordson (Major 8 1958 to 12 1964), (Power Major & Super Major 8 1958-12 1965. (Part No: E1ADDN3524) $174.93 [Enlarge Picture] Steering Shaft & Nut Assembly - Right hand spiral. For Models: 3500, 3550, (4000 w manual steering all years w. power steering from 1965-1970), 420, 515, 535. (Part No: D2NN3A710D) $225.79 [Enlarge Picture] Steering Shaft & Nut Assembly - LH spiral. For Model: 5000 1965 to 8 1970 w power steering. (Part No: C5NN3A710A) $155.91 [Enlarge Picture] Steering Shaft & Nut Assembly - RH Spiral w Single Bolt Sector Adjustor. For Models: 8N (1950->1952) (Part No: 8N3575B) $137.48 [Enlarge Picture] Steering Shaft & Nut Assembly - For Models: Major, Power Major, Super Major. (Part No: 81717457) $164.93 [Enlarge Picture] Steering Shaft & Nut Assembly - For Models NAA & Jubilee with Manual Steering. 22 1 2 in. long. (Part No: NAA3575C) $109.90 [Enlarge Picture] Steering Shaft & Nut Assembly - For 8N 1948-49 with 4 Bolt Sector Adjustor - LEFT HAND SPIRAL. s n less than 216989 (1948-1949). (Part No: 8N3575A) $174.15 [Enlarge Picture] Steering Shaft & Nut Assembly, Manual - Fits: 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with lower bearing. (Part No: NCA3575A) $104.28 [Enlarge Picture] Steering Shaft Bearing - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE) $10.49 [Enlarge Picture] Steering Shaft Bearing - For models 9N, 2N. Replaces 683571A. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. (Part No: 5BC-TIM) $10.47 [Enlarge Picture] Steering Shaft Bearing & Cup, Upper - Manual steering. A=2". For Models: (2000, 3000 8 68 and up), 2600, 3600, 3900, 2610, 3610. (Part No: S.65161) $27.90 [Enlarge Picture] Steering Shaft Bearing Cone - FOr Models: 2N, 9N. (Part No: 4CB-TIM) $29.18 [Enlarge Picture] Steering Shaft Bearing Cup - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552) $7.84 [Enlarge Picture] Steering Shaft Bearing Cup - For models 9N, 2N. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. Replaces B3552. (Part No: 6-TIM) $8.25 [Enlarge Picture] Steering Shaft Bearing Kit - Kit consists of 6-TIM quantity 2, 5BC-TIM quantity 2, and 4CB-TIM quantity 2. For models 9N, 2N. (Part No: STEERING KIT) $91.53 [Enlarge Picture] Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3 4" OD. For Models: 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505) $34.95 [Enlarge Picture] Steering Shaft Bushing - Bushing assembly, upper. For Models: 2000, 3000, 4000 1965 and up w power steering. (Part No: C5NN3517A) $10.86 [Enlarge Picture] Steering Shaft Repair Kit - Repair kit for steering shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w o cab 1975-3 1976; w o cab 4 1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w o cab 1981-9 1984). (Part No: SRK632AA) $49.03 [Enlarge Picture] Steering Shaft Repair Kit, Upper - Fits: Dexta, Super Dexta. (Part No: S.67786) $69.89 [Enlarge Picture] Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT) $29.99 [Enlarge Picture] Steering Valve - For Models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, except row crops. (Part No: 310863) $637.85 Steering Valve - Fits 601, 801, 2000, 4000. (Part No: 310863) $637.85 Steering Wheel - Steering wheel, 18" O.D., 36 Spline, .785" Shaft Dia. `` 3 Ruberized Plastic covered spokes. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Can replace OEM # 82016841. (Part No: D6NN3600B) $42.04 [Enlarge Picture] Steering Wheel - 15 inch Diameter. For Models: 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010. Replaces OEM# D2NN3600A. (Part No: D7NN3600A) $42.30 [Enlarge Picture] Steering Wheel - 17 inch diameter, 1 7 8 Hub Diameter, 6 spline. For Models: Major, Power Major. (Part No: E1ADKN3600A) $41.91 [Enlarge Picture] Steering Wheel - 18" dia., 3 4" keyed, 4 covered steel spokes. For Model: 9N 1939-1940. (Part No: S.67507) $39.30 [Enlarge Picture] Steering Wheel - For 2N, 9N. 17 5 8" Diameter, 11 16" Keyed hub, replaces OEM# 2N3600. Looks just like original with bare spokes! For 9N and 2N. (Part No: R2090) $33.75 [Enlarge Picture] Steering Wheel - 17-5 8" dia., 11 16" splined hub, 3 covered spokes. For Models: 231, 335, 340, 445, 530, 540, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 4600, 4600SU, 4610, 5000, 5100, 5200, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610. (Part No: C5NN3600C) $37.80 [Enlarge Picture] Steering Wheel - ~17" Diameter, 1 1 4 Hub Diameter, 48 spline. For Models: Dexta, Super Dexta. (Part No: 957E3600) $36.15 [Enlarge Picture] Steering Wheel - Keyed, steel spokes. Wheel measures 17 1 2 inches in diameter, 3 4 inch hub, 4inch dish. Replaces E0NN3600AA (Part No: S.61373) $36.72 Steering Wheel - 17 5 8" Diameter, 11 16" x 36 Spline Hub - New Style w Covered Spokes. For 8N 1948-1952, NAA, 600, 700, 800, 900, 2000, 4000 (all 4 cylinder engines). NOT LIKE ORIGINAL - Modern version features covered spokes. (Part No: 8N3600PL) $45.14 [Enlarge Picture] Steering Wheel - 17-5 8" dia., 11 16"-13 16" keyed, 3 covered steel spokes. For Models: 9N, 2N 1939-1947. (Part No: 2N3600) $34.50 [Enlarge Picture] Steering Wheel Cap - Black cap for models: (2000, 3000, 4000, 5000, 7000 1965-75), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-81), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2 90), (5610, 5900, 7610 1981-91), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-82), (3230, 3430, 3930, 4130, 4630 3 1990 and up), (4830, 5030 7 1990 and up), (5610S, 6610S, 7610S 1994 and up). (Part No: C7NN3655B) $8.73 Steering Wheel Dome Nut Washer - With Beveled edge. For Models: 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4CYL), 2030, 2111, 2120, 2130. (Part No: 356515S) $3.95 [Enlarge Picture] Steering Wheel Dome Nut Washer - With beveled edge. For Models: 4000 (4CYL), 4030, 4040, 4121, 4130, 4140 (1948 THRU 1964). (Part No: 356515S) $3.95 [Enlarge Picture] Steering Wheel Nut - Chrome nut. For Dexta, Super Dexta (Part No: 957E3518B) $13.69 Steering Wheel Nut - Plain Metal Nut, Steering wheel Acorn Style. 5 8-18 for 9N and 2N (1939-1947) (Part No: 351103S) $5.10 Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 5\8-18, CHROME PLATED. For tractors: 9N, 2N {1939-1947}. (Part No: 351103CC) $9.90 [Enlarge Picture] Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11\16 -20. CHROME PLATED. For Models: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC) $5.00 [Enlarge Picture] Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11 16". Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S) $3.75 [Enlarge Picture] Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: WSV125A) $56.43 [Enlarge Picture] Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $7.50 [Enlarge Picture] Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $8.77 [Enlarge Picture] Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $8.77 [Enlarge Picture] Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $8.77 [Enlarge Picture] Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $8.77 [Enlarge Picture] Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $8.77 [Enlarge Picture] Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $8.77 [Enlarge Picture] Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1 2" diameter, 11 16 inch 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE) $35.18 [Enlarge Picture] Support Front Axle - Front axle support. For Models: (2000, 3000 1965 to 7 1970), 4110, 4140. (Part No: C5NN3010D) $218.91 [Enlarge Picture] Support Front Axle - Front axle center support. For Models: 2000, 2100, 2110, 230A, 231, 234, 2600, 2610, 2910, 3000, 3100, 333, 334, 335, 3600, 3900, 3910, 4100, 4110, 4140, 4600SU, 530A, 531. Item weighs 52 lbs. (Part No: C7NN3010F) $181.03 [Enlarge Picture] Tie Rod - End, outer, notched (9), 19-5 8" to center of post. For Models: 8200, 8600, 9200, 9600. (Part No: C7NN3280D) $37.08 [Enlarge Picture] Tie Rod - End, Left Hand, straight, drilled, 8 holes, 31" to center of post. For 6710, 7710, 7910, 8210, 8700, 9700, TW10, TW15, TW20, TW25, TW35, TW5, (Part No: E1NN3280AA) $59.95 [Enlarge Picture] Tie Rod - 35.50" long, 1.187" dia., 7 cross holes. For Models: TW10, (TW30 standard width adjustable axle). (Part No: D8NN3280EA) $156.77 [Enlarge Picture] Tie Rod - A= 4.812", B= 1.125", 12 RH thread. For Models: (3000, 3500, 3550, 4000, 4500 all from 1 1965 and up), (5500, 5550 from 1 1967 and up), (650, 6500 from 1 1973 to 12 1977), (750, 7500, 755, 755A, 755B from 1 1973 and up), (535 from 1 1975 to 9 1978), (420 from 1 1975 and up). Replaces C7NN3289A, C5NN3289A, 81817084. (Part No: C7NN3289B) $55.19 [Enlarge Picture] Tie Rod End - End, tie rod, Left Hand outer, 17.500" to center of post. For Models: 5000, 5600, 5610, 660, 6610, 7000, 7600. (Part No: C7NN3280F) $27.95 [Enlarge Picture] Tie Rod End - End, tie rod, Right Hand outer, Right Hand threads, 4.250" to center of post. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Part No: C7NN3289E) $43.05 [Enlarge Picture] Tie Rod End - Tie rod end, Right Hand outer, 1.27" dia., 17.750" to center of post. For 5610S, 5610, 6610S, 6610, 7010S, 7610S, 7610, 7810S, 7810, (Part No: E3NN3278AB) $102.59 [Enlarge Picture] Tie Rod End - Tie rod end, Left Hand outer, 5" to center of post. For 5610S, 5610, 6610S, 6610, 7010S, 7610S, 7610, 7810, (Part No: E3NN3289AA) $59.49 [Enlarge Picture] Tie Rod Inner - End, Right Hand inner, 1.00"-16 thread, for tie rod with power steering, 3.75" to center of post. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, (Part No: C7NN3289D) $25.76 [Enlarge Picture] Tie Rod Inner - End, Left Hand inner, for tie rod with power steering, 18.125" to center of post. For Models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C7NN3B161A) $31.95 [Enlarge Picture] Tie Rod Outer - End, Left Hand outer, 19.00" to center of post, for tie rod with manual or power steering. For 4000, 4600, 4610, (Part No: C5NN3278A) $29.95 [Enlarge Picture] Tie Rod Outer - End, Right Hand outer, female, .750"-16 thread, 3.75" to center of post, for tie rod with manual or power steering. For 4000, 4600, 4610, (Part No: C5NN3289C) $24.95 [Enlarge Picture] Tie Rod Outer - End, Right Hand outer, 15.375" to center of post, for tie rod with power steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, (Part No: C7NN3280E) $29.95 [Enlarge Picture] Tie Rod Outer - End, Left Hand outer, 15.375" to center of post, for tie rod with power steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, (Part No: C7NN3281A) $36.45 [Enlarge Picture] Tie Rod Short - End, Right Hand offset, threaded, 8-3 4" to center of post. For Models: 6710, 7710, 8700, 9700, TW10, TW15, TW20, TW25, TW35, TW5. (Part No: E1NN3289AA) $29.95 [Enlarge Picture]   Tools Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $13.36 [Enlarge Picture] Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $13.11 [Enlarge Picture] Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $13.11 [Enlarge Picture] Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $37.66 [Enlarge Picture] Chain Binder - 1 4" chain binder, 2600 pound load limit. (Part No: LL104) $34.98 [Enlarge Picture] Chain Binder - 1\4" chain binder, 2600 pound load limit. (Part No: LL104) $34.98 [Enlarge Picture] Chain Binder - 3 8" chain binder, 5400 pound load limt. Use with either 5 16" or 3 8" chain. (Part No: LL105) $43.49 [Enlarge Picture] Chain Binder - 3 8" chain binder, 5400 pound load limt. Use with either 5 16" or 3 8" chain. (Part No: LL105) $43.49 [Enlarge Picture] Chain Binder - 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106) $87.00 [Enlarge Picture] Chain Binder - 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106) $87.00 [Enlarge Picture] GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $21.83 [Enlarge Picture] GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $21.83 [Enlarge Picture] GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $15.98 [Enlarge Picture] GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $15.98 [Enlarge Picture] GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $33.25 [Enlarge Picture] GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $33.25 [Enlarge Picture] GREASE GUN CLAMP - Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $7.18 [Enlarge Picture] GREASE GUN CLAMP - Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $7.18 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V W/CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V W/CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V W/CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87 [Enlarge Picture] GREASE GUN POWERLUBER 14.4V W/CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87 [Enlarge Picture] GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $4.68 [Enlarge Picture] GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $4.68 [Enlarge Picture] GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $5.06 [Enlarge Picture] GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $5.06 [Enlarge Picture] MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $17.41 [Enlarge Picture] MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $17.41 [Enlarge Picture] WIRE STRIPPER 4-WAY - 4-way wire stripper crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $8.04 [Enlarge Picture] WIRE STRIPPER 4-WAY - 4-way wire stripper\crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $8.04 [Enlarge Picture] Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50 [Enlarge Picture] Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002) $182.83 [Enlarge Picture] Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002) $182.83 [Enlarge Picture] Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $168.27 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001) $209.43 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $194.87 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001) $209.43 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $194.87 [Enlarge Picture]   Wheels Bearing Cone - For Model: Major. (Part No: 14118BR) $18.58 [Enlarge Picture] Bearing Cone - Bearing w\seal. For Models: 321, 339, 340, 501. (Part No: 141898) $17.46 Bearing Cone - For Models: 321, 339, 340, 501. (Part No: 8M1216) $18.76 Bearing Cone - BEARING CONE For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: LM501349) $14.42 [Enlarge Picture] Bearing Cone - Cone, transmission output shaft rear. For Models: 700, 900. (Part No: NCA7066A) $23.22 Bearing Cone - Bearing, Tapered Cone For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 (Part No: WAA4221A) $14.42 [Enlarge Picture] Bearing Cone - Wheel bearing cone. For Model: MAJOR. (Part No: 355X) $56.16 [Enlarge Picture] Bearing Cone, Front Wheel, Inner - Cone. For 2N, 9N (Part No: B1201) $11.58 [Enlarge Picture] Bearing Cone, Front Wheel, Outer - Tapered Cone. For Models: 2N, 9N. (Part No: B1216) $11.49 [Enlarge Picture] Bearing Cup - For Models: 321, 339, 340, 501. (Part No: 8M1217) $8.38 Bearing Cup, Front Wheel, Inner - Cup. For 2N, 9N (Part No: B1202) $7.86 [Enlarge Picture] Bearing Cup, Front Wheel, Outer - For Models: 9N, 2N. (Part No: B1217) $5.97 [Enlarge Picture] Bearing Cup, Rear Axle - Bearing, Tapered Cup For 4120, 600, 800, 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N4222) $5.75 [Enlarge Picture] Center Disc to Rear Axle Bolt - 1.87" long, 5 8" x 18 UNF RH threads. For Models: 2N, 9N. (Part No: 9N1117) $6.21 [Enlarge Picture] FRONT Tire and Tube - Single rib 4.00 x 19". For 8N, 9N, 2N. (Part No: R2073) $128.90 [Enlarge Picture] FRONT Tire and Tube - Three rib 4.00 x 19". For 8N, 9N, 2N. (Part No: R2074) $108.90 [Enlarge Picture] Ford Front Wheel Bearing Kit - Front wheel bearing kit. Kit Contains one each: LM48548(Cone), LM48510(Cup), LM11949(Cone), LM11910(Cup), 310195(Seal). Repairs one wheel. For Models: 4000, 4600, 4610. Fits hub C9NN1104E. (Part No: EHPN1200C) $19.30 [Enlarge Picture] Front Rim - Front Rim with weight holes. 4.5" x 16", 2500 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 5.50" x 6.00" x 16" tires. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1015D) $51.74 [Enlarge Picture] Front Rim - Front Rim with weight holes. 8" x 16". 6 bolt, 6" circle, 4.62" pilot. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D5NN1007A) $87.58 [Enlarge Picture] Front Rim - Front rim 4.00" x 19", 6-Lug, 4 5 8 inch Pilot Hole, 6 inch bolt circle. For Models: 8N, NAA, Jubilee, 600, 800. (Part No: C5NN1015A) $100.95 [Enlarge Picture] Front Rim (Blank) - Blank (no center) front rim, 3" x 19". Center must be removed from old rim and welded into new rim. For 2N, 8N, 9N. Add additional $10.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R0651) $54.90 [Enlarge Picture] Front Rim - Heavy Duty - Front Rim with weight holes. 5.5" x 16", 3300 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 7.5" x 16" tires. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1007A) $59.26 [Enlarge Picture] Front Rim 4 x 19 - Fits 9N & 2N. 5 Lug. Rim size: 4.00"x 19.00" 9.75" pilot (center) hole. (Part No: 9N1015A) $116.95 [Enlarge Picture] Front Tractor Tires - We are now offering Front Tractor Tires! Click 'ENLARGE PICTURE’ to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: FRONT_TIRES) $0.00 [Enlarge Picture] Front Wheel Bearing - Front Wheel Bearing For Models: 4000, 4600, 4610. Fits hub C9NN1104E. (Part No: FW94WS) $19.30 Front Wheel Bearing Kit - Kit Contains one each: LM67048(Cone), LM67010(Cup), LM11949(Cone), LM11910(Cup), NCA1190A(Seal). For models: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1955-1964 with S N 137817 and up. Repairs one wheel. For hub C9NN1104F. (Part No: CBPN1200C) $14.95 [Enlarge Picture] Front Wheel Bearing Kit - Kit Contains one each: LM67048(Cone), LM67010(Cup), LM11949(Cone), LM11910(Cup), 16754(Seal). For Models: Dexta, Super Dexta (1958-1960), 2000, 3000 (1965-1975), 2600, 3600, 3900, 4100 (1975-1981), 2610, 3610, 3910, 4110 (1981 and up). Repairs one wheel. For hub C9NN1104F. (Part No: FW93WS) $17.84 [Enlarge Picture] Front Wheel Bearing Kit - Kit contains one each: LM67048(Cone), LM67010(Cup), LM11949(Cone), LM11910(Cup), 957E1190A(Seal). Repairs one wheel. For Models: 2000, 2600, 2610, 300, 3600, 3610, 3900, 3910, 4100, 4110, DEXTA, SUPER DEXTA. For hub C9NN1104F. (Part No: EHPN1200E) $17.84 [Enlarge Picture] Front Wheel Bearing Kit - For Models: (5000, 7000 1972 and up w 8 x 16 wheel), 8000, 8600, 8700, 9000, 9600, 9700, (TW10, TW20, TW30 less heavy duty), (5610, 6610, 6710, 7610, 7710, 10 1989 and up heavy duty axle), 3400, 3550, 4400, 4500, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 535, 540, 540A, 540B, 545, 545A. NOTE: check bearing and cup numbers before ordering. Replaces 8L4221 312518, 25590-25520 for inner bearing and cup, 312520 312548, 02474 02420 outer bearing and cup, E4NN1190AA seal. (Part No: S.67455) $27.82 [Enlarge Picture] Front Wheel Bearing Kit - For Models: (TW10, TW20 w 8 bolt hub), TW5, TW15, TW25, TW35, 8530, 8630, 8730, 8830. NOTE: Check bearing & cup numbers before ordering. Replaces NAA42224A 9N4222, 3780 3720 inner bearing and cup, BB1201 7EQ1217, 2788 2720 outer bearing and cup, E4NN1190AA seal. (Part No: S.67456) $31.78 [Enlarge Picture] Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner Cone(86609936), Inner Cup(86609935), outer Cone(86576860), Outer Cup(86577043), seal(NCA1190A). (Part No: CBPN1200A) $27.95 [Enlarge Picture] Front Wheel Bushing - For models: 1801, 50C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 4000, 4040, 4140, 420, 4410, 445, 445A, 445C, 450, 4500, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6810, 7610. (Part No: TDBA3110A) $10.59 Front Wheel Cap - For 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, all 1939 to 1957. Front Wheel Cap. (Part No: 2N1139B) $8.26 [Enlarge Picture] Front Wheel Hub - For 8N, NAA. Front Wheel Hub. Uses CBPN1200A Wheel Bearing Kit. (Part No: 86511582) $65.90 [Enlarge Picture] Front Wheel Nut - Front Wheel Nut EXACT copy of ORIGINAL. Hex style 11 16" O.D. Tractors: 9N, 2N (1939 to 1944). **Must order in multiples of 2, priced each. (Part No: 9N1012) $4.64 [Enlarge Picture] Front Wheel Nut Set, Set of 10 - Sold in quantities of 10, enter 10 for complete set. 10 1 2" - 20 wheel nuts. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1012B) $.65 [Enlarge Picture] Front Wheel Rim - 4:50 x 16, 6 bolt hub, 6.0" bolt circle, 4.625" pilot hole, fits 5:50 or 6:00 x 16 tire. For Models: Dexta, Super Dexta. (Part No: 957E1015D) $59.90 [Enlarge Picture] Front Wheel Rim 3.5 x 19 - Wheel Rim for a 750x16 tire. Also replace part number 83960327. for Major, Power Major and Super Major. (Part No: E6NN1007BA) $70.16 Front Wheel Seal - For Models: 2000, 3000, 2300, 231, 2600, (2610 1976-1981 w o cab), (3000 1965-1975), 3300, 3600, 3610, 3900, (3910 1981), 4000, 4100, (4110 1981), 531, Dexta, Super Dexta (Part No: 957E1190A) $9.05 Front Wheel Stud Bolt Set - Set of 10 - Front wheel stud bolt measures 1 2" X 2".- WITHOUT nuts. Note: Nuts are available by ordering p n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1107F) $16.77 [Enlarge Picture] Front wheel bearing kit - Kit contains one each: LM501349(Cone), LM501310(Cup), M12649(Cone), M12610(Cup), 203030UB(Seal). Repairs one wheel. For Models: 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Fits hub C9NN1104D. (Part No: FW96WS) $23.90 [Enlarge Picture] Hub Cap - For Models: 2000, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030. (Part No: 957E1139) $7.78 [Enlarge Picture] Hub Front - Hub, front wheel. For Models: 4000, 4100, 4600, 4610. (Part No: C9NN1104E) $44.50 Hub, Front Wheel - Tractors: 601, 701, 801, 901, Dexta, Super Dexta, for 6 hole 4.50" X 16" wheel (1957 to 1964); for 6 hole 4.00 X 16" wheel. Tractors: 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000 (1965 to 1975), 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3550, 3600, 3900, 3910, 4000, 4100, 4110, 4140, (1975 to 1981), 2610, 3610 (1981 & up). Uses bearing & seal kit FW93-WS; wheel bolt C5NN1107F & nut C5NN1012B. Replaces 95731110, C5NN1104B. (Part No: C9NN1104F) $46.90 [Enlarge Picture] Lug Nut, Rear Wheel - **Must order in quantities of 8, price shown is for 1. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134) $1.00 [Enlarge Picture] Power Adjust Rim - 11x28, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 x 28, 13.6 x 28. Add addition $20.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ``Verify OEM Part # before ordering. (Part No: C5NN1050H) $471.74 [Enlarge Picture] Rear Rim - 9x28 inch wide base demountable rim with 6 loop clamps. Fits tire size 11.2 x 28. Add $25.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: NCA1020C) $103.44 [Enlarge Picture] Rear Rim - Six loop, 10" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Replaces NCA1020B. Add additional $25.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: NCA1020B) $153.67 [Enlarge Picture] Rear Rim - Six loop, 11" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 per rim to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1050E) $127.51 [Enlarge Picture] Rear Rim - Six loop, 12" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2068) $165.33 [Enlarge Picture] Rear Tractor Tires - We are now offering Rear Tractor Tires! Click 'ENLARGE PICTURE’ to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: REAR_TIRES) $0.00 [Enlarge Picture] Rear Wheel Center - For 28" & 32" Wheels, 8N, Dexta, NAA, Jubilee, 501, 600, 800, 700, 2000 EARLY, 4000 EARLY. Center has a 4.25 inch pilot hole and mounting bolts are 6 inches across center-to-center. Add additional $10.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1036D) $183.17 [Enlarge Picture] Rear Wheel Rim Bolt - Package of 12, rear rim center disc to rim bolt, 5 8"-18 x 2-3 4", CGH head. For Models: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 1801. (Part No: 370938S36) $23.04 [Enlarge Picture] Rim 12X28 6 Clamp - Rim, 12" x 28" , 6 loop clamps. For 2310, 2610, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 3400, 340A, 340B, 3500, 3600, 3610, 3930, 4100, 4110, 4600, 4610. (Part No: 31319712G) $172.86 Seal, Front Wheel Hub, OEM - Dust seal to original spec. 2.00" ID, 2-11 16" OD. For Models: 9N, 2N, 8N, NAA, Jubilee all from 1939-53. (Part No: 9N1190B) $8.16 [Enlarge Picture] Seal, Front Wheel Hub - Front Wheel Hub Dust Seal Fits, 2000 55-64 USA BUILT, 2N 39-47, 4000 55-64 USA BUILT, 600 55-64 USA BUILT, 700 55-64 USA BUILT, 800 55-64 USA BUILT, 8N 48-52, 900 55-64 USA BUILT, 9N, NAA 53-54.Sold in qty of 2, PRICE IS FOR EACH. Must be ordered in quantities of 2. Can replace 9N1190B. (Part No: NCA1190A) $3.58 [Enlarge Picture] Stop Body - For the Power Adjust Rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 503676M1. Must be ordered in multiples of 2, priced each. (Part No: C0NN1057A) $20.25 [Enlarge Picture] TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $8.96 [Enlarge Picture] TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $8.96 [Enlarge Picture] TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $9.93 [Enlarge Picture] TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual see-thru vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $9.93 [Enlarge Picture] TIRE PAINT, BLACK - BLACK TIRE PAINT (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844) $39.95 [Enlarge Picture] TIRE PAINT, BLACK - BLACK TIRE PAINT (1 QUART)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $19.95 Tire Bead Buster - Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300) $334.52 [Enlarge Picture] Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $13.47 [Enlarge Picture] Wheel Bearing Kit - Complete for 1 wheel. For Models: Major, Power Major, Super Major. (Part No: VPJ2201) $73.15 Wheel Clamp - Disc to rim. Double ramp type for power adjustable rims. For 28" rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241. (Part No: E5NN1043AA) $29.46 [Enlarge Picture] Wheel Hub - For Models: 1720, 1910, 2110. (Part No: SBA330460121) $44.85 [Enlarge Picture] Wheel Hub - With Gasket for Dexta and Super Dexta. Square head with grease fitting. Also replaces 81816580 and C5NN1107F. (Part No: 81811271) $14.50 Wheel Rim Stop Body Screw - Use with power adjust rims PAR10X28 and C5NN1050J and C5NN1050H. For tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -). MUST be ordered in multiples of 2, price is for 1. (Part No: C0NN1058A) $11.25 [Enlarge Picture] Wheel Stud, Rear - 5 8 inch -18 thread .690" O.D. on serration, lengh (without head) is 1 15 16 inches. For Models: 8N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, (4000 1958-1964). Must be ordered in quantities of 8, priced individually. (Part No: 312696) $1.05 [Enlarge Picture]

View Cart Phone Orders (800) 853-2651 Customer Service (360) 379-4808 Monday - Friday: 10:00 AM-6:30 PM EST Order online anytime! Your Shopping is Secure! Member of the Better Business Bureau

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us! We carry tractor parts and manuals for: Allis Chalmers, Case, Farmall, Ferguson, Ford, Fordson, International, International Harvester, John Deere, Massey Ferguson, Massey Harris, Oliver, and more. We can supply 3 Point Hitch parts, Alternators, Battery Accessories, Bearings, Belt-fan, Generator & Alternator, Brake Parts, Carburetor Repair Kits, Coils, Decals, Fenders, Generators, Hydraulic Cylinders, Ignition Kits, Manifolds, Mufflers, Paint, PTO Clutches, Radiators, Seals & Gaskets, Starter Drives, Starters, Tie Rod Ends, Tractor Gas Tanks, Tractor Seats, Water Pump Repair Kits, Water Pumps, Wheel Bearing Kits and much more. [ Products List ] Copyright © 1997-2012 Yesterday's Tractor Co. - A Washington State Corporation Antique Tractor Headquarters All Rights Reserved TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.