Low Prices
Fast Shipping
Friendly Service
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books
• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums
Ford 9N, 2N and 8N
[ Show All Pictures ]
 
Brakes
Brake Adjusting Hole Cover - For Models: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: H2092)$7.50 [Show Picture]
Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255)$74.28 [Show Picture]
Brake Backing Plate Felt Seal - For Models: 8N, NAA, Jubilee. (Part No: 8N2217)$4.70 [Show Picture]
Brake Backing Plate Support - For 8N and NAA. (Part No: 8N2212B)$77.95 [Show Picture]
Brake Camshaft Hole Cover Spring - Tractors: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N2322)$5.9 [Show Picture]
Brake Cover - Cover, Brake camshaft hole. EXACT of ORIGINAL. Tractors: 8N, NAA (1948 TO 1954). (Part No: 8N2224)$7.36 [Show Picture]
Brake Cross Shaft Bushing - Measures about 1 inch ID, 1 1 6 OD and 1 2 inch wide. Bushing is a little less than 1 16 thick. Presses into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477)$11.52 [Show Picture]
Brake Drum Repair Kit - For Models: 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit for 1 wheel. (Part No: 8NAA2250)$27.95 [Show Picture]
Brake Repair Kit - For Models: 9N, 2N from 1939-1947. (Part No: 9N2065)$31.52 [Show Picture]
Brake Shoe Return Spring, RH Brake - For Models: 8N, NAA, 501, 600, 700, 800, 900, 2000, 4000 series (1948 to 1964). ** Sold in quantities of 2. Enter 1 for the pair. ** (Part No: NCA2204A)$10.48 [Show Picture]
Brake Shoe Set - Set includes 4 shoes with bonded lining. For 9N and 2N. (Part No: 9N2019)$84.94 [Show Picture]
Brake Shoes - Complete set of 4. For 8N, NAA, Jubilee. (Part No: 8N2200B)$49.90 [Show Picture]
Brake Support Plate Stud - EXACT of ORIGINAL. Tractors: 8N, NAA (1948 TO 1953). ** MUST BE ORDERED IN LOTS OF 2, PRICED EACH.** (Part No: 350920S8)$6.40 [Show Picture]
Bushing - Bushing, brake cross shaft. Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side} For tractors: 9N, 2N, EARLY 8N {1939-1949}. (Part No: 782477)$11.52 [Show Picture]
 
Clutch
Clutch Alignment Tool - 1-3 8" 10 spline, .67" pilot. For Models with single clutch: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 1112-5996)$8.49 [Show Picture]
Clutch Disc, New - 9" Clutch Disc, Hub-1 3 8 inch, Splines-10, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. Also replaces NAA7550A. (Part No: 91A7550WHD)$37.93 [Show Picture]
Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. Kit contains 9 inch 10-spline spring drive disc, 9 inch single pressure plate, pilot and release bearings, includes pilot tool. (Part No: 8N7563K)$103.90 [Show Picture]
Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1 2" long. Minimum Order Qty is 2. (Part No: 8N7508B)$8.96 [Show Picture]
Clutch Pedal Bushing - 1 Inch inside diameter. For 2N, 9N 1939-1947. Clutch pedal bushing split 2 piece. Price per each, min order qty is 2. Order will be increased to next multiple of 2. (Part No: 9N7508)$8.96 [Show Picture]
Clutch Pedal Shaft Bushing - 7 8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A)$8.20 [Show Picture]
Clutch Pedal Shaft Bushing - 7 8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A)$8.20 [Show Picture]
Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657)$49.23 [Show Picture]
Clutch Release Bearing Spring - Two used per tractor, sold individually, .627" OD, 4.875" overall length and .095" wire diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 940, 941, 1801, 1821, 1841, (2000, 4000 4-cyl), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. (Part No: 9N7562)$6.10 [Show Picture]
Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)$8.90 [Show Picture]
Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, Jubilee, 600, 700, 800, 900 with single clutch. (Part No: 8N7563)$86.78 [Show Picture]
Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. 2.0625 Inch inside diameter. (Part No: 78-7580A)$23.07 [Show Picture]
Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)$27.58 [Show Picture]
 
Cooling System
Cooling System Kit - Early - Complete cooling system overhaul for 9N, 2N and Early 8n S\N 263842 and below. Includes Radiator, Radiator Cap, Radiator Hood Pad, Upper and Lower Radiator Hose, 4 hose clamps, Radiator Mounting Pads, Thermostat and Water Pump. (Part No: CSK-E)$262.00 [Show Picture]
Cooling System Kit - Late - Complete cooling system overhaul for 9N, 2N and Late 8n S\N 263842 and up. Includes Radiator, Radiator Cap, Radiator Hood Pad, Upper and Lower Radiator Hose, 4 hose clamps, Radiator Mounting Pads, Thermostat and Water Pump. (Part No: CSK-L)$267.00 [Show Picture]
Cooling System Kit, Early - Complete cooling system overhaul for 9N, 2N and Early 8N SN# 263842 and below. Includes Radiator, Radiator Cap, Radiator Hood Pad, Upper and Lower Radiator Hose, 4 hose clamps, Radiator Mounting Pads, Thermostat and Water Pump. (Part No: CSK-E)$262.00 [Show Picture]
Cooling System Kit, Late - Complete cooling system overhaul for 9N, 2N and Late 8N SN# 263842 and up. Includes Radiator, Radiator Cap, Radiator Hood Pad, Upper and Lower Radiator Hose, 4 hose clamps, Radiator Mounting Pads, Thermostat and Water Pump. (Part No: CSK-L)$267.00 [Show Picture]
Fan Belt - For Models: 2N, 9N, 8N EARLY with front mount distributor. Length is 44 1 8 inches. Alternator belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL)$15.26 [Show Picture]
Fan Blade - 4 Blade - For Models: 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A)$40.87 [Show Picture]
Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D)$48.05 [Show Picture]
Fan Shroud - For 9N, 2N, 8N. Metal Fan Shroud. (Part No: 2N8146)$59.92 [Show Picture]
Gasket, pump cover plate - Tractors: 9N, 2N, 8N (Part No: 9n8507)$1.49
Radiator - High Quality Radiator for 9N, 2N, 8N. Copper Core, 3 rows of tubes, weight 16 lbs. Draincock included. 1 year warranty. (less cap). The Original or Replacement Fan Shroud will not fit this radiator without some modification to the fan shroud. This modification consists of trimming the inside of the bottom of the fan shroud. (Part No: 8N8005-C)$170.05 [Show Picture]
Radiator Cap - Plain, conventional type 4 psi pressure cap, less ornament. For tractors 9N, 2N, 8N. (Part No: 2N8100A-LW)$11 [Show Picture]
Radiator Cap, Black - For 9N, 2N, 8N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A)$7.58 [Show Picture]
Radiator Cap, Chrome - For Models: 9N, 2N, 8N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615)$15.78 [Show Picture]
Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A)$3.72 [Show Picture]
Radiator Hood Pad - For Models: 9N, 2N, 8N. (Part No: 2N8032)$2.58 [Show Picture]
Radiator Hose Clamp, Upper & Lower - EXACT of ORIGINAL. For Models: 9N, 2N, 8N (1939-1954), NAA (2 per tractor, 1953-1954). (Part No: 608287)$4.09
Radiator Hose Set - 8N S N 263844 and above. Lower Radiator Hose #8N8286 and Upper Radiator Hose #2N8260. (Part No: 8NL-HOSESET)$10.00 [Show Picture]
Radiator Hose, Lower - Hose, water pump to radiator lower. Hose is 1 1 2 inch inside diameter.``For Models: 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, Early 8N, 900, 901, 9N, NAA. (Part No: 312588)$6.8 [Show Picture]
Radiator Hose, Upper - Hose, cylinder head to radiator upper. For tractors 9N, 2N & 8N (Part No: 2N8260)$5.54 [Show Picture]
Radiator Mounting Pads - Price is for a package of 2 pieces. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. (Part No: 180705M1)$5.90 [Show Picture]
Thermostat - 160 degree lo-temp. For tractors 9N, 2N, 8N. Fits in upper radiator hose, 2.250" long. (Part No: B2NN8575A)$16.99 [Show Picture]
Water Pump - For Models: 9N, 2N, 8N. Comes with Pulley, Rear Cover Plate and Gasket. Pulley will accomodate a 1 2 or 5 8 belt. (Part No: CDPN8501A)$39.23 [Show Picture]
Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B)$41.19 [Show Picture]
Water Pump Mounting Gasket, - Gasket, pump rear to cyl. block. Tractors: 9N, 2N, 8N (Part No: 9N8513)$1.46 [Show Picture]
Water Pump Pulley - For Models: 2N, 9N. (Part No: 9N8606)$25.57 [Show Picture]
Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR)$8.96
 
Decals and Emblems
Data Plate - Patent data plate, with drive screws to install. Restoration Quality. For tractors: 9N, 2N, {1939-1947}. (Part No: 9N14001)$12.6 [Show Picture]
Decal Set - For 8N, 2N, 9N. Decal for Fenders (2). Each decal is approx 8-3 4in. wide by 3-1 4in. tall. (Part No: R2006)$17.50 [Show Picture]
Decals, Hood Set - For Models: 8N, 2N, 9N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005)$14.00 [Show Picture]
Ford Script Painting Mask - Includes 1 small 5-3 8" x 2-1 4", and 1 large 8-5 8" x 3" painting masks. For Model: 8N. Application directions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.61441)$20.14 [Show Picture]
Hood Emblem - 8N (bright metal with red enamel background). (Part No: 8N16600A)$32.25 [Show Picture]
Plate - Patent data plate, with drive screws to install. For tractors: 8N, {1948-1952}. (Part No: 8N14001)$12.6 [Show Picture]
 
Drive Train
Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N4235C)$156.91 [Show Picture]
Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee. This includes rear axle bearing(2N4221) and cup(9N4222). (Part No: S.18516)$55.52 [Show Picture]
Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1 4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21)$28.35 [Show Picture]
Axle Collar - For Models: 2N, 9N. (Part No: 9N4132)$14.46 [Show Picture]
Axle Kit - Kit contains, 2 shaft bearings, 2 housing gaskets, 2 shaft collars, 2 bearing cups, 2 housing gaskets, 2 inner axle seals, 2 outer axle seal assemblies, 2 rear axle nut lock rings Not Links. For Models: 9N, 2N, 8N 1948. Kit comes with 2 sets of outer axle seals one for use on 9N, 2N tractors and one for 8N. (Part No: AXLEKIT-8NEARLY)$165.78 [Show Picture]
Axle Kit - Late - Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For Model: 8N (Part No: AXLEKIT-8N)$171.60 [Show Picture]
Axle Kit, Late - Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For model 8N after Serial Number 486753. (Part No: AXLEKIT-8N)$171.60 [Show Picture]
Axle Nut & Snap Ring - Kit, nut & snap ring. For Models: 8N, NAA. (Part No: CBPN4179A)$10.86 [Show Picture]
Axle Oil Seal, Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)$0.82 [Show Picture]
Axle Oil Seal, Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)$0.82 [Show Picture]
Axle Oil Seal-Outer - For models 8N to S N 486753. Inside Diameter 2 3 4 inch. Rear axle oil seals. Also comes as part of A8NN4248A Assembly. Packaged in qty of 2, price is for a pair. (Part No: A8NN4251A)$17.38 [Show Picture]
Axle Outer Retainer - For Model: 8N to S N number 486753. Rear Axle Outer Retainer. These retainers come with seals and gaskets. Order Qty of 1 for a set of 2. (Part No: A8NN4248A)$26.46 [Show Picture]
Axle Outer Retainer Gasket - Requires 2. For Models: 8N 1948-1950. (Part No: 8N4225)$2.02 [Show Picture]
Axle Ring - For 8N 1948-1953, Jubilee & NAA.``Snap Ring - Sold In Lots Of 10, priced each. (Part No: 8N4187)$1.92 [Show Picture]
Axle Seal, Inner Pair - Seal, Oil For 8N, JUBILEE, NAA.Enter QTY 1 For PKG of 2. (Part No: 8N4233A)$9.34 [Show Picture]
Axle Seal, Outer Pair - For Models: 8N S N 486753 UP, NAA, Jubilee. Comes in pairs. 3 3 4 OD, 2 7 8 ID. (Part No: D5NN4115A)$13.33 [Show Picture]
Axle Shaft Bearing - Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221)$38.48 [Show Picture]
Axle Shaft Gasket - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2 inch, OD = 2 1 4 inch. (Part No: 8N4284)$3.06 [Show Picture]
Axle Shaft Nut - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179)$8.92 [Show Picture]
Axle Washer - For model 8N. (price shown is for EACH, minimum Qty is 2. (Enter '2' in QTY box. ) (Part No: 8N4293)$3.62 [Show Picture]
Countershaft - Fits 8N. (Part No: 8N7111)$129.06 [Show Picture]
Differential Gasket Kit, 6 Pieces - Fits 9N, 2N, 8N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928)$11.24 [Show Picture]
Differential Pinion Bearing Cone - For Models: 2000 1965>, 2N 1939-52, 3000 1965>, 4110 1965>, 600 W 4 SP. TRANS. SN<54165 - 1958, 5 SP. SN<196155 - 1959, 601 W 4 SP. TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 8N 1939-52, 9N 1939-52, DEXTA 1957-1964, NAA 1953-54. (Part No: BB4221B)$19.33 [Show Picture]
Differential Pinion Bearing Cup - Bearing cup, differential bearing For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, DEXTA, JUBILEE, NAA (Part No: BB4222)$14.48 [Show Picture]
Differential Pinion Bearing Cup, Front - For Models: 2N 1939-52, 8N 1939-52, 9N 1939-52, DEXTA 1957-4 1962, NAA, Jubilee 1953-54. (Part No: BB4616B)$37.85 [Show Picture]
Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4 1962, NAA, Jubilee 1953-1954. (Part No: BB4621B)$32.87 [Show Picture]
Front Axle Support Pin Spacer - 1.783" I.D., 2.023" O.D., .758" L. For Models: 8N, NAA (1948-1954). (Part No: 8N3024)$6.95 [Show Picture]
Gasket, Differential Center Housing, Side Cover - For Models: 2N, 8N, 9N. Price is for each. (Part No: 9N4131)$.99 [Show Picture]
Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, Jubilee, NAB. SOLD IN QUANTITIES OF 5, PRICE IS FOR 1. (Part No: 9N7086)$0.68 [Show Picture]
Gasket, Paper Shim, For Bearing Retainer - Fits Ford 9N, 2N, 8N, NAA & Jubilee, Replaces #9N4130 & #8N4229 ``Note: (Use for seal between bearing retainer and axle housing or backing plate. Use in multiples to replace shims #8N4229. Price is for each. (Part No: 9N4130)$0.98 [Show Picture]
Gasket, Rear axle housing gasket - Gasket center housing to rear axle housing. Tractors: 8N, 9N, 2N. (Part No: 2N4035)$1.76 [Show Picture]
Gasket,, Rear axle housing gasket - Gasket center housing to rear axle housing. Tractors: 9N, 2N, 8N. (Part No: 2N4035)$1.76 [Show Picture]
Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed torque converter transmission, 2.210 tall, 1.768 tapers to 1.003 OD, 0.140 wire diameter. For Models: 2N, 8N, 9N. (Part No: 9N7227B)$9.95 [Show Picture]
Gear Shift Lever, with Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 5 16 in. UNF thread for the shift knob (knob included) The early series 3 8 shaft is no longer available. Note: uses gear shift knob BB7213A. ``Fits: 8N, NAA, Jubilee, 600, 700, 800, 900, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B)$69.50 [Show Picture]
Gear Shift Pin - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w 3 & 4 Speed transmission). (Part No: 9N7221B)$5.28 [Show Picture]
Gear, 1st, 4 Speed Transmission - 60 28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100)$218.71 [Show Picture]
Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A)$97.75 [Show Picture]
Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 8N7102)$199.64 [Show Picture]
Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112)$215.15 [Show Picture]
Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B)$110.92 [Show Picture]
Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set)$162.08 [Show Picture]
Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171)$69.06 [Show Picture]
Main Shaft Connecting Coupling - For Models: 2000, 3000, 8N, NAA, Jubilee all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA)$57.91 [Show Picture]
Oil Seal, Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A)$6.9 [Show Picture]
Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. Inside diameter 2 5 8 inches. For tractors~ 9N, 2N, (1939-1947). 2.437-I.D. 3.485-O.D. For 2N, 9N. Comes in qty of 2. (Part No: D6NN4251A)$18.54 [Show Picture]
Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-seal fits over top of sweat collar. (Part No: SS92)$17.50 [Show Picture]
Sherman Transmission External Lever - Step Up Step Down lever. For Models: 2N, 8N, 9N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 with Sherman trans. (Part No: 10A909)$47.50 [Show Picture]
Shift Cover Plate Gasket - For 4-SPEED transmissions. For Models: 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Sold in lots of 5, priced each. (Part No: 8N7223)$2.10 [Show Picture]
Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 s n 252844 & up). (Part No: BB7213A)$5.9 [Show Picture]
Shifter Boot - Transmission gear shift lever boot. For tractors: 2N, 8N, 9N, NAA. Bottom hole is 1-1 2" diameter. (Part No: 8N7277)$10.76 [Show Picture]
Thrust Washer, Transmission - 2.16" O.D, 1.75" I.D. For Model: 8N. (Part No: 8N7148)$5.85 [Show Picture]
Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 & 4 Speed Transmissions. For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7120)$43.62 [Show Picture]
Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066)$8.53 [Show Picture]
Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067)$13.32 [Show Picture]
Transmission Case to Center Housing Gasket - For Models: 9N, 8N, 2N. (Part No: 9N4662)$2.08 [Show Picture]
Transmission Drain Plug - Has 2.5 in. outside diameter. For tractors: 9N, 2N, 8N, NAA, {1939-1954}. Also filler plug for tractor:NAA {1953-1954}. Gasket available as p n 8N7011. Please specify in comments section if needed. (Part No: 9N7010)$13.64 [Show Picture]
Transmission Gear Shift Cover Gasket - For Models: 2N, 9N. (Part No: 9N7223B)$5.76 [Show Picture]
Transmission Rebuild Kit - For Models: 9N, 2N and 8N with 3 & 4 speed transmissions (1939-52). This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK3952)$101.88 [Show Picture]
 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
12 Volt Conversion Kit, Front Mount Distributor - 9N, 2N, 8N - Updates older 6-volt tractors to 12-volt charging system. For early 9N, 2N, 8N 1948-1951 with front mount distributor (distributor is right behind radiator), to S N 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. (Part No: 8NE10300ALT-C)$133.65 [Show Picture]
12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is to be used if you use your 6 volt coil - OR you can install a 12 volt coil (no coils included in kit) and NOT use this resistor, wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts Nuts Instructions. (Part No: 8NL10300ALT)$133.72 [Show Picture]
Alternator Adjustable Arm - Alternator adjusting arm. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10304)$19.95 [Show Picture]
Alternator Base Bracket Kit - Universal - UNIVERSAL BASE BRACKET MOUNTING KIT. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. Can be used with our 8NE10305SE Alternator. (Part No: 2348258)$39.25 [Show Picture]
Alternator Base Bracket - Alternator Base Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10303)$19.95 [Show Picture]
Alternator Base Bracket Kit - Universal - UNIVERSAL BASE BRACKET MOUNTING KIT. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. Can be used with our 8NE10305SE Alternator. (Part No: 2348258)$39.25 [Show Picture]
Alternator Top Bracket - Alternator Top Mounting Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10302)$19.95 [Show Picture]
Battery Cable - For 2N, 8N, 9N. Ground Strap. 5.5 inches center to center. (Part No: D1NN14301H)$12.18 [Show Picture]
Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A)$22.98 [Show Picture]
Battery to Starter Cable - For Model: 8N, 1939-1952. Starter to Battery Cable. 10.5" Long, 1Gauge, 7 16 Diameter. (Part No: 8N14300B)$16.64 [Show Picture]
Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For 2N, 8N, 9N (Part No: E27N10094B)$8.84 [Show Picture]
Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A)$72.36 [Show Picture]
Clip - Clip for 7 16" hole. Electric wiring to instrument panel support bracket 1948-1952 1 required, Main wiring assembly to instrument panel brace 1 required, Wiring to hood top reinforcement 1950-1952 3 required. For Model: 8N (1948-1952). (Part No: 51C14197)$3.60 [Show Picture]
Coil - Six Volt - For Models: 8N (1939-1950), 2N, 9N with Front Mount Distributor (Part No: 9N12024)$23.93 [Show Picture]
Coil - Twelve Volt - For 9N, 2N, 8N (S N up to 263843. Front Mount Distributor 12 Volts (replaces 9N12024-12V) (Part No: 12VOLTCOIL)$29.72 [Show Picture]
Coil, 12-Volt - For 8N, 9N, 2N (SN# up to 263843. Front Mount Distributor 12 Volts (replaces 9N12024-12V) (Part No: 12VOLTCOIL)$29.72 [Show Picture]
Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)$32.03 [Show Picture]
Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011)$32.03 [Show Picture]
Condenser - Fits 9N, 2N, 8N with front mount distributor. (Part No: A0NN12300A)$2.95 [Show Picture]
Distributor - For 8N serial #263844 and up - side mount. Can use the Pertronix Electronic Conversion Kit #1552. (Part No: 8N12127B-WCR)$210.00 [Show Picture]
Distributor Assembly, Complete - For 9N, 2N, (8N all front mount S N up to 263843). Includes: Points, condenser & Distributor Cap. Does not include coil or mounting gaskets. (Part No: 9N12100)$179.90 [Show Picture]
Distributor Base Assembly - Front mount distributor base assembly, with clamps & rear bushing. For Models: 2N, 8N, 9N. Does not come with breaker plate. (Part No: 9N12139)$116.68 [Show Picture]
Distributor Breaker Plate Retainer Clip - For Models: 9N, 2N, 8N (Front Mounted Distributor). (Part No: 91A12146)$2.80 [Show Picture]
Distributor Bushing, FRONT - Front bushing is for FRONT MOUNT DISTRIBUTOR only. **MINIMUM ORDER QTY IS 2 price each **. For 9N, 2N, early 8N. (Part No: 9N12120)$2.54 [Show Picture]
Distributor Bushing, REAR - Bushing, (rear), for front mount distributor, 9N, 2N, 8N. MINIMUM ORDER QTY IS 2 price each. (Part No: 18-12132)$4.96 [Show Picture]
Distributor Cam and Weight Assembly - Cam and weight assembly for 8N12127B-WCR original style Side-mounted distributor. For use on models 8N after s n 263844, 1950 thru 1952. (Part No: 8N12176)$73.89 [Show Picture]
Distributor Cap - For Models: 9N, 2N, 8N to #263843 all with front mount distributor. Distributor Cap. (Part No: 9N12106C)$10.70 [Show Picture]
Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 2N, 9N, 8N with front mount distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM)$17.62 [Show Picture]
Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite)replacement distributors (Through January 1987)for Late 8N with side mount distributor. (Part No: IBK1009)$27.78 [Show Picture]
Distributor Clip Kit - For Models: 9N, 2N, 8N (Early). (Part No: 9N12144)$4.30 [Show Picture]
Distributor Coil Bail - For Models: 9N, 2N, 8N with front mount distributor. (Part No: 9N12137)$2.80 [Show Picture]
Distributor Drive Gear - For Models: 8N (early), 2N, 9N. Gear for Distributor Drive (front mount distributor). (Part No: 7RA6255)$18.62 [Show Picture]
Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (Part No: FAA12239A)$5.90 [Show Picture]
Distributor Gasket Kit - For models 9N, 2N, 8N prior to s\n 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104)$2.32 [Show Picture]
Distributor Point Set - Point set, Blue Streak premium quality. For Models: 9N, 2N, 8N (Early). (Part No: A0NN12107ABS)$27.84 [Show Picture]
Distributor Point Set, 4-Cylinder - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: D8NN12171AA)$5.76 [Show Picture]
Distributor Rotor - Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGP1016D)$22.34 [Show Picture]
Distributor Rotor, Front Mount Distributor - Fits 9N, 2N, 8N with front mount distributor. (Part No: B2NN12200A)$4.48 [Show Picture]
Distributor Shaft Assembly - Distributor shaft assembly. For use on models 8N after s n 263844, 1950 thru 1952. Drilling is required to install distributor gear. (Part No: 8N12175)$69.05 [Show Picture]
Distributor Shaft, Cam and Weights Assembly - Distributor shaft with cam and weights attached for 9N12100 front mounted distributor. For use on Ford tractor models 9N, 2N, and 8N before s n 263843, 1939 to 1950. (Part No: 9N12187)$69.95 [Show Picture]
Distributor, Breaker Plate - 4 Cylinder. Breaker plate with points & condensor. For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FAD12152A)$34.20 [Show Picture]
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor) , NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)$79.12 [Show Picture]
Electronic Ignition Conversion Kit - 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)$85.15 [Show Picture]
Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT)$171.81 [Show Picture]
Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 2N, 9N, 8N with FRONT MOUNT distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247)$98.19 [Show Picture]
Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)$79.12 [Show Picture]
Electronic Ignition Conversion Kit, 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)$85.15 [Show Picture]
Generator Cut Out Assembly - Cut out assembly. For 2N, 9N, (Part No: B0NN10505A)$21.74 [Show Picture]
Generator, 6 Volt - New generator with pulley for 2N, 9N, 8N, (2000, 3000, 4000 prior to 1965). Single terminal, 6 Volt. (Part No: 8N10000)$119.00 [Show Picture]
Ignition Kit - Ignition kit, less rotor. Contains points, gauge, and condenser for Front Mount Distributor. For 2N, 8N, 9N (Part No: ATK6FF)$11.48 [Show Picture]
Ignition Kit - 4 Cylinder - Ignition kit, less rotor. Contains points, gauge, and condenser. For models 1950 to 1964. For 2000, 4000, 600, 6000, 6100, 700, 800, 8N (late), 900, NAA (Part No: ATK7FA)$9.72 [Show Picture]
Ignition Kit With Rotor - Ignition kit with standard points, condenser and rotor for Front Mounted Distributor. For 2N, 8N, 9N. (Part No: ATK6FFR)$18.48 [Show Picture]
Ignition Kit With Rotor - 4 Cylinder - Ignition kit contains: points, rotor, condensor. For 8N (LATE - w side mounted distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. For models from 1950 to 1964 (4 Cylinder). Also for TISCO 8N12127-WCR distribution. (Part No: ATK7FAR)$11.86 [Show Picture]
Ignition Kit With Rotor, Front Mount Distributor - Premium quality Blue Streak points (A0NN12107ABS), rotor, condenser, and gauge For 2N, Early 8N, 9N. (Part No: APN12000ABSR)$33.86 [Show Picture]
Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For Models: NAA, NAB, Jubilee, 8N w side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787)$20.72 [Show Picture]
Ignition Tune Up Kit, Comprehensive - For 8N (S N 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 , 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT)$34.96 [Show Picture]
Ignition Tune Up Kit, Front Mount Distributor - For Models: 2N, 8N, 9N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: Point set, Condenser, Rotor & (4) 437 Autolite Spark Plugs and gaskets. (Part No: 309786)$28.8 [Show Picture]
Ignition Tune-Up Kit And Maintenance Kit - Comprehensive kit For 9N, 2N, 8N, using front mount distributors to S\N 263843. Complete Tune-Up and maintenance Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs, oil filter, Fuel Sediment Bowl Assy, and Fuel Filter, In-Line, 5\16 inch . Note: If your 8N has an angle mounted distributor refer to part #TUNEMAINT8N instead. (Part No: 2N9NTUNEMAINT)$66.46 [Show Picture]
Ignition Tune-Up Kit, Front Mount Distributor - For 9N, 2N, 8N, using front mount distributors to S N 263843. Complete Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs. Note: If your 8N has an angle mounted distributor refer to #TUNEkit instead. (Part No: 2N9NTUNEKIT)$39.99 [Show Picture]
Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C)$8.84 [Show Picture]
Pertronix Distributor Cap - Pertronix Distributor Cap for 2N, 9N, 8N with front mount distributor that has been converted to Electronic Ignition using kit 1247XT. (Part No: 1247XTCAP)$27.95 [Show Picture]
Point Set - Point set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGS2224LB)$8.52 [Show Picture]
Pulley Alternator , Wide - For use with our 12 Volt Conversion kits that use the 10SI style alternator only. .670 inch Bore, 2.5 inch outside diameter, using a 5 8 inch wide belt. Replaces the narrower pulley (3 8ths aprox)on tractors with a wider crankshaft pulley (3 4 inch). (Part No: AFD5035)$13.99 [Show Picture]
Pulley Alternator, Wide - For use with our 12 Volt Conversion kits that use the 10SI style alternator only. .670 inch Bore, 2.5 inch outside diameter, using a 5 8 inch wide belt. Replaces the narrower pulley (3 8ths aprox)on tractors with a wider crankshaft pulley (3 4 inch). (Part No: AFD5035)$13.99 [Show Picture]
Pulley Generator - Fits 8N (Keyway). Shaft hole is approx 0.67in (approx 11 16). Pulley O.D. approx 3-5 8in, I.D. approx. 2 5 16in. X 5 8 wide. (Part No: 8N10130A)$14.95 [Show Picture]
Resistor - For 2N, 9N, 8N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in ignition system, resistance = 3.0 ohms. (Part No: 8NE10306)$4.95 [Show Picture]
Resistor Assembly - For Models 8N to s n 263844. Resistor measures .6 ohms + - .1 (Part No: A8NN12250A)$17.50 [Show Picture]
Resistor Assembly, Ignition Coil - For Models 9N, 2N. Resistor measures .5 ohms. (Part No: A8NN12250B)$17.50 [Show Picture]
Rotor Clip - For Models: (8N s n 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with side mounted distributor. (Part No: 8N12213)$4.84 [Show Picture]
Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N w side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A)$3.14 [Show Picture]
Rubber Grommet - Rubber grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605)$4.28 [Show Picture]
Spark Plug - For 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437)$3.1 [Show Picture]
Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Part No: 8N12112B)$11.26 [Show Picture]
Spark Plug Wire Set, Custom - Premium quality wire set for 8N with side mount distributor. Solic brass distributor coils, Zinc-coated plug terminals, Tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: 8N12259)$20.20 [Show Picture]
Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)$17.62 [Show Picture]
Spark Plug, Bosch - Replaces Autolite AL437, AL82 and Champion H14Y and H18Y. For Models: 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). Price is for EACH. Minimum Order is 4. (Part No: 3000-6000)$3.00 [Show Picture]
Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115)$14.68 [Show Picture]
Starter Copper Strap, Solenoid to Starter - Fits 8N. (Part No: 8N11518)$6.22 [Show Picture]
Starter Drive - New improved design starter drive, for 9N, 2N, 8N (1939 to 1952). (Part No: 52-11350C)$36.75 [Show Picture]
Starter Repair Kit - For 9N, 2N, 8N. Starter Repair Kit contains all parts necessary for repair of starter #8N11001. (Part No: SRK401)$15.86 [Show Picture]
Starter Solenoid - 6 Volt - For 8N, 1948-1952. Starter Solenoid, 6 Volt. (Part No: 8N11450)$9.98 [Show Picture]
Starter Switch - with mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG)$20.95 [Show Picture]
Starter Switch, Restoration Quality - Fits 9N, 2N with Safety Start. (Part No: 9N11450B)$23.24 [Show Picture]
Starter, 12 Volt, With Drive - New Starter for 9N, 2N, 8N. 12 Volt. Complete starter includes drive mechanism. (Part No: 8N1100R)$139.00 [Show Picture]
Starter, 6 Volt, Less Drive - Starter, less drive. For 2N, 8N, 9N, with 6 volt systems. Restoration quality. (Part No: 8N11001)$99.95 [Show Picture]
Starter, 6 Volt, With Drive - New Starter for 9N, 2N, 8N. 6 Volt.Complete starter - includes drive mechanism. Replaces OEM # 8N11001R. (Part No: 8N11001WD)$129.00 [Show Picture]
Terminal Block - For Models: 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A)$11.90 [Show Picture]
Voltage Regulator - For 8N - For Early Models with Front Mount Distributor (Part No: 8N10505B)$33.90 [Show Picture]
Wire Harness, Main - Fits 2N, 9N (1939-43 with one-wire generator). (Part No: 86618153)$26.50 [Show Picture]
Wiring Harness - Has woven fabric casing. For 2N (1943 to 1947) w single pole generator. Ignition Wiring. (Part No: 2N14401)$27.6 [Show Picture]
Wiring Harness 12 Volt - For Late 8N. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Part No: 8NL10301)$39.95 [Show Picture]
Wiring Harness, 6 Volt - Has woven fabric casing. For 8N with front mounted distributor and 2 wire generator, up to s n 263843. Ignition wiring harness. (Part No: 8N14401B)$23.74 [Show Picture]
Wiring Harness, Restoration Quality - Complete wiring harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For Model: 8N up to s n 263843 with front mount distributor. (Part No: 8N14401B-OE)$171.17 [Show Picture]
 
Engine Bearings
Main Bearing Set, .010 - .010" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633E-010)$45.17 [Show Picture]
Main Bearing Set, .020 - .020" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633G-020)$46.12 [Show Picture]
Main Bearing Set, .030 - .030" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633-030)$48.60 [Show Picture]
Main Bearing Set, .040 - .040" main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For Models: 2N, 8N, 9N. (Part No: MBK9N633-040)$68.2 [Show Picture]
Main Bearing Set, .060 - 1 kit used per engine. Contains center, front, and rear bearings. For models 2N, 8N, and 9N. (Part No: MS-120P-060)$56.78 [Show Picture]
Main Bearing Set, STD - Standard main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 2N, 8N, 9N, (Part No: MBK9N633A-STD)$46.12 [Show Picture]
Main Bearing Set, Standard - Standard main bearing kit. 1 kit used per engine. Contains center, front, and rear bearings. For 8N, 9N, 2N, (Part No: MBK9N633A-STD)$46.12 [Show Picture]
Rod Bearing Pair, Standard - With journal size of 2.095 inches. For Models: 2N, 8N, 9N. 1 Pair for one Rod. Must be ordered in lots of 4. (Part No: 9N6211A-PAIR)$10.00
Rod Bearing Pair, .001 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211B-PAIR)$10.59
Rod Bearing Pair, .002 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211C-PAIR)$10.00
Rod Bearing Pair, .010 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211E-PAIR)$10.00
Rod Bearing Pair, .020 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211G-PAIR)$10.00
Rod Bearing Pair, .030 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211-030-PAIR)$10.00
Rod Bearing Pair, .040 - For Models: 2N, 8N, 9N. 1 Pair for one Rod. (Part No: 9N6211-040-PAIR)$10.00
Rod Bearing Pair, Standard - With journal size of 2.095 inches. For Models: 8N, 9N, 2N. 1 Pair for one Rod. Must be ordered in lots of 4. (Part No: 9N6211A-PAIR)$10.00
Rod Bearing Set, STD - With Journals measuring 2.095 inches. Connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N. (Part No: CRK9N6211A-STD)$22.77 [Show Picture]
Rod Bearing Set, .010 - .010" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 2N, 8N, 9N, (Part No: CRK9N6211E-010)$30.02 [Show Picture]
Rod Bearing Set, .020 - .020" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211G. For 2N, 8N, 9N, (Part No: CRK9N6211G-020)$34.28 [Show Picture]
Rod Bearing Set, .030 - .030" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-030. For 2N, 8N, 9N, (Part No: CRK9N6211-030)$35.64 [Show Picture]
Rod Bearing Set, .040 - .040" connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211-040. For 2N, 8N, 9N, (Part No: CRK9N6211-040)$23.69 [Show Picture]
Rod Bearing Set, STD - With Journals measuring 2.095 inches. Connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 8N, 9N, 2N. (Part No: CRK9N6211A-STD)$22.77 [Show Picture]
Rod Bearing Set, Standard - With Journals measuring 2.095 inches. Connecting rod bearing kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 8N, 9N, 2N. (Part No: CRK9N6211A-STD)$22.77 [Show Picture]
Rod Bearing, .060 - Individual Rod Bearing 1 pr. For Model: 9N, 2N, 8N. 4 Required per engine. (Part No: CB-200P-060)$11.04
 
Engine Gaskets
Crankshaft Seal, Front - Rope seal, front. Upper and lower is the same part. For Models: 2N, 8N, 9N. PRICE IS FOR EACH AND YOU MUST ORDER 2. Replaces 8N6700 and 8N6707. (Part No: 8N6700)$2.76 [Show Picture]
Crankshaft Seal, Front, Upper - Use 8n6700 (Part No: 8N6707)$2.76 [Show Picture]
Crankshaft Seal, Rear - Rope seal, rear. Upper and lower is the same part. For Models: 2N, 8N, 9N. PRICE IS FOR EACH AND YOU MUST ORDER 2. Replaces 8N6701 and 8n6702. (Part No: 8N6701)$2.88 [Show Picture]
Distributor Breaker Cover Gasket - For models 9N, Early 8N, 2N. SOLD IN QUANTITIES OF 10, PRICE IS FOR 1. (Part No: 9N12276)$1.00 [Show Picture]
Distributor Gasket kit - For models 9N, 2N, 8N prior to s\n 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104)$2.32 [Show Picture]
Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448)$1.99 [Show Picture]
Full Gasket Set - Full Engine Overhaul Gasket Set with metal head gasket. For Models: 9N, 2N, 8N. (Part No: 8N6008M)$29.15 [Show Picture]
Gasket, Oil Pan Drain Plug - Fits 9N, 2N, 8N. (Part No: 8N6734)$.99 [Show Picture]
Governor Housing Mounting Cover Gasket - For Models: 9N, 2N, 8N. (Part No: 9N6022)$0.99 [Show Picture]
Head Gasket - Head gasket. All soft material except for the fire rings. For Models: 2N, 8N, 9N. (Part No: 8N6051A)$12.54 [Show Picture]
Oil Pan Gasket Set - For 9N, 2N, 8N; through 1964. 7 Piece Set. Oil Pan Gasket Set with upper and lower crankshaft rope seals, left and right oil pan gaskets, and oil pan drain plug gasket. (Part No: 9N6781)$15.36 [Show Picture]
Timing Gear Front Cover Gasket - For Models: 9N, 2N, (8N prior to s n 263844). (Part No: 9N6020A)$1.2 [Show Picture]
Timing Gear Side Cover Gasket - For Models: 9N, 8N, 2N. (Part No: 8N6018)$0.99 [Show Picture]
Upper Gasket Set - For Models: 8N, 9N, 2N. Upper Gasket Set with Metal Head Gasket. (Part No: VG8NM)$24.14 [Show Picture]
Valve Cover Gasket - Price is for each, minimum order quantity is 2. For Models: 2N, 8N, 9N. (Part No: 7HA6521)$1.12 [Show Picture]
 
Engine Overhaul Kits
Basic In Frame Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic in frame kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BIFF106A)$183 [Show Picture]
Basic Overhaul Kit With Bearings - For 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains: pistons & sleeves, rings, pin & retainers, pin bushings, complete gasket kit. Rod and Main bearing sets (Specify size of: STD, .010, .020, .030, .040 in 'COMMENTS' when ordering). For Models: 2N, 8N, 9N. You need to specify the following in 'COMMENTS' when ordering: #1. Three or Four Ring Pistons; #2. Sleeve Wall Thickness (.040 or.090); #3. MAIN Bearing Size of STD, .010, .020, .030, .040. #4 ROD bearing Size of STD, .010, .020, .030, .040 . (Part No: OK120)$374.53 [Show Picture]
Basic Overhaul Kit, 120 Gas, 3-ring pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3\16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF103A-LCB)$199.25 [Show Picture]
Basic Overhaul Kit, 120 Gas, 3-ring pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF106A-LCB)$209.3 [Show Picture]
Basic Overhaul Kit, 120 Gas, 4-Ring Pistons, .090 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For Models: 2N, 8N, 9N. (Part No: BEKF105A-LCB)$213.43 [Show Picture]
Basic Overhaul Kit, 120 Gas, 4-ring Pistons, .040 Sleeves - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Basic engine kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For 2N, 8N, 9N. (Part No: BEKF102A-LCB)$181.98 [Show Picture]
Comprehensive Overhaul Kit - GUIDE - TO DETERMINE WHICH OF THE BELOW KITS YOU WILL NEED, YOU NEED TO KNOW THE FOLLOWING: (1) If your pistons have 3 or 4 rings per piston. (2) If your piston sleeve thickness is .040 or .090 inches. (3) If your oil pump gear is 3 4 or 9 16 inches wide. (4) If you have rotating or non-rotating exhaust valves - If your keepers or keys on the exhaust and intake valves are the same, you DO NOT have rotating valves. If your keepers or keys on the exhaust and intake valves are the different, you DO have rotating valves. Engine bearings can be ordered from our ENGINE BEARINGS category. (Part No: FORD COMP KIT)$0.00
Comprehensive Overhaul Kit, 120 Gas - 3 RING PISTONS, .090 SLEEVES, 3\4 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit. Contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket set, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For Models: 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for and additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-8H-LCB)$355.16 [Show Picture]
Comprehensive Overhaul Kit, 120 Gas, 4-ring Pistons, .090 Sleeves - 4 RING PISTONS, .090 SLEEVES, 9 16 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For, 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-9H-LCB)$452.25 [Show Picture]
Engine Overhaul Kit, 120 Gas - Made by TISCO. 120 CID 4 cylinder gas 3-3 16" standard bore. Engine overhaul kit contains, thin wall .040" sleeves, 4 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake & exhaust valves, valve springs & retainers, guides & retainers, valve keys. For 2N, 8N, 9N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: EOK102-LCB)$276.54 [Show Picture]
Overhaul Kit, Comprehensive - GUIDE - TO DETERMINE WHICH OF THE BELOW KITS YOU WILL NEED, YOU NEED TO KNOW THE FOLLOWING: (1) If your pistons have 3 or 4 rings per piston. (2) If your piston sleeve thickness is .040 or .090 inches. (3) If your oil pump gear is 3 4 or 9 16 inches wide. (4) If you have rotating or non-rotating exhaust valves - If your keepers or keys on the exhaust and intake valves are the same, you DO NOT have rotating valves. If your keepers or keys on the exhaust and intake valves are the different, you DO have rotating valves. Engine bearings can be ordered from our ENGINE BEARINGS category. (Part No: FORD-COMP-KIT)$0.00
Overhaul Kit, Comprehensive, 120 Gas - 3 RING PISTONS, .090 SLEEVES, 3 4 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit. Contains, thick wall .090" sleeves, 3 ring pistons, rings, pins & retainers, pin bushings, complete gasket set, timing gear, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For models 8N, 9N, 2N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for and additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 3-8H-LCB)$355.16 [Show Picture]
Overhaul Kit, Comprehensive, 120 Gas, 4-ring Pistons, .090 Sleeves - 4 RING PISTONS, .090 SLEEVES, 9 16 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit contains, thick wall .090" sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For, 8N, 9N, 2N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C & (4) 8N6534B will be added to the order for an additional special price of $65.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our 'Engine Bearings' category. (Part No: 4-9H-LCB)$452.25 [Show Picture]
Valve Overhaul Kit - Made by TISCO. For servicing one engine when valve replacement is necessary. For 9N, 2N, 8N with solid guides, free-rotating exhaust valves. Kit contains intake valves, exhaust valves, valve springs and keys, solid type valve guides and rotating valve kit. (Part No: VOKF928NFR)$174.66 [Show Picture]
 
Engine Parts
Camshaft - For press on gear. Fits 8N S N 263843 and greater using SIDE mount distributor. (Part No: 8N6250)$165.19 [Show Picture]
Camshaft - Re-ground - Camshaft, Re-ground, Ford 2N, 9N, 8N with front mount distributor. For bolt on style timing gear. (Part No: 2N6250B)$151.47 [Show Picture]
Camshaft - Reground - Camshaft, Reground, Ford 8N, 9N, 2N with front mount distributor. For bolt on style timing gear. (Part No: 2N6250B)$151.47 [Show Picture]
Camshaft Kit, Side Mount Distributor Engine - Includes: NEW Camshaft with Distributor Gear & Lifters For 8N with Side Mount Distributor (Part No: R0885K)$252.11 [Show Picture]
Crankshaft - NEW KIT WITH BEARINGS. For Models: 9N, 2N, 8N With STD Rod And Main Bearings. (Part No: 9N6303ACK)$628.44 [Show Picture]
Crankshaft Pulley - Crankshaft pulley for Ford 9N, 2N, 8N tractors. Crankshaft mounting is 1.63 OD and 1.18 in. ID. and has four 1 4"-20 threaded holes for hub when being used with front mounted loader. Can be used with or without loader. Replaces 2N6312. Used with part #'s 192161 and 194354. (Part No: 192160)$44.19 [Show Picture]
Cylinder Head - For 2N, 8N, 9N all GAS 1939-52. Cylinder Head. (Part No: 8N6050A)$196.47 [Show Picture]
Cylinder Head Studs - Studs are priced each, must order in quantities of 9. Tractor uses 18. Minimum order is 9. Studs are 7 16 diameter and 3 inchs long. For 9N, 2N, 8N. ``** Must order in quantities of 9, priced each. (Part No: 8N6065A)$4.72 [Show Picture]
Distributors and Distributor Parts - These are located in the Electrical System parts section. (Part No: DISTRIBUTORS)$0.00
Governor - Complete governor assembly, 2 arm, for 8N (1948 through 1952 with proofmeter drive). (Part No: 8N18204B)$195.93 [Show Picture]
Governor Centrifugal Assembly - Governor internal centrifugal assembly, fits 9N18200C or 8N18204B above, for 9N, 2N, 8N (1939 thru 1952). (Part No: 9N8N18179CA)$166.85 [Show Picture]
Governor Compensating Spring - 4.95" length. For Model: 8N. (Part No: 8N9827)$8.58 [Show Picture]
Governor Dust Seal - Replacement Governor dust seal. For Models: 2N, 8N, 9N. (Part No: 9N18183)$8.72 [Show Picture]
Governor Housing - Governor Housing includes needle bearing, Lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 9N, 2N, 8N tractors built 1939 thru 1952. (Part No: 8N18085)$136.67 [Show Picture]
Governor Lever Spring - For Models: 9N, 2N. (Part No: 9N18196)$4.22 [Show Picture]
Governor Lower Race Assembly Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18186B)$57.59 [Show Picture]
Governor Mount with Gasket - Aluminum cover used with side mount distributor. (Part No: 8N6017B)$52.50 [Show Picture]
Governor Needle Bearing - For Models: 2N, 8N, 9N. (Part No: 9N18182)$12.42 [Show Picture]
Governor Repair Kit - Basic - For 9N, 2N, 8N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5 8 inch). (Part No: BOK12502)$48.37 [Show Picture]
Governor Repair Kit, Basic - For 8N, 9N, 2N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5 8 inch). (Part No: BOK12502)$48.37 [Show Picture]
Governor Repair Kit, Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5 8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A)$147.54 [Show Picture]
Governor Shaft - Shaft assembly, with or without proofmeter. For 2N, 8N, 9N. (Part No: 9N8N18187A)$46.49 [Show Picture]
Hand Starting Crank - 9N, 2N, 8N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Part No: 351010R31)$29.50
Piston Rings - These are located in the ENGINE RINGS category. (Part No: ENGINE RINGS)$0.00
Pistons and Sleeves - Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Part No: Various)$100.00
R Seal Retainer - Retainer, for rear crankshaft oil seal. For Models: 2N, 8N, 9N. (Part No: 91A6335)$21.43 [Show Picture]
Rod w/Bushing, Reconditioned - Fits 9N, 2N, 8N all with Gas. Reconditioned Piston Rod with Bushing. (Part No: 1201581)$139.55 [Show Picture]
Rod with Bushing, Reconditioned - Fits 9N, 2N, 8N all with Gas. Reconditioned Piston Rod with Bushing. (Part No: 1201581)$139.55 [Show Picture]
Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 9N, 2N, 8N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Part No: 8N6546B)$212.87 [Show Picture]
Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384)$35.48 [Show Picture]
Timing Gear Cover - For 8N with Side Mount Distributor. (Part No: 8N6019B)$74.51 [Show Picture]
Timing Gear, Camshaft - For Bolt-on type camshafts. Fits 9N, 2N, 8N thru 1952. (Part No: 7RA6256)$79.57 [Show Picture]
Timing Gear, Crankshaft - For Models: 2N, 8N, 9N. Timing Gear Crankshaft. (Part No: 486306A)$42.32 [Show Picture]
Valve Guide - Single valve guide for 9N, 2N, 8N.``** Order in lots of 8 ** (Part No: 8BA6510B)$8.14 [Show Picture]
Valve Guide Retainer - 120 CID 4 cylinder gas engines. Sold in Multiples of 8 only, price shown is for one (Enter '8' or '16' etc. in QTY). For 2N, 8N, 9N. (Part No: 40-6512)$1.72 [Show Picture]
Valve Key, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free rotating exhaust valves. For 2N, 8N, 9N. Sold in quantities of 8 only, price shown is for one. (Part No: 7HA6518)$0.34 [Show Picture]
Valve Key, Rotating Exhaust - 120 CID 4 cylinder gas engine. Valve key for FREE ROTATING exhaust valves. Sold in quantities of 8 only price shown is for one. For Models: 2N, 8N, 9N. (Part No: EAM6518A)$1.8 [Show Picture]
Valve Rotor Assembly - Valve rotator kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves (Part No: 8N6534B)$18.16 [Show Picture]
Valve Seat, Exhaust - For Models: 9N, 2N, 8N. (Part No: 218-7405)$11.00 [Show Picture]
Valve Seat, Intake - For Models: 2N, 8N, 9N. (Part No: 218-7535)$6.00 [Show Picture]
Valve Service Kit - Contains: 8 Valve Springs, 8 Valve Guides-Solid Type & 16 Valve Locks For 2N, 8N, 9N. (Part No: VSKF928N)$51.02 [Show Picture]
Valve Spring - 120 CID 4 cylinder gas engine. Valve spring for use with split guide. For 2N, 8N, 9N. Sold in quantities of 8 only. price shown is for one. (Part No: 2NC6513)$4.05 [Show Picture]
Valve Spring Retainer, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 2N, 8N, 9N.``** Must order qty 8, priced each.** (Part No: 8BA6514)$2.12 [Show Picture]
Valve Spring Set - Sold in quantities of 8 priced individually. Fits 9N, 2N, 8N. (Part No: 8N6513)$2.66 [Show Picture]
Valve Stem Seal - ** Enter in Qtys of 8. **``Seal for valve guide in 120 CID 4 cylinder gas engine. For 2N, 8N, 9N. **Sold in sets of 8, priced each.** (Part No: 8BA6571)$0.62 [Show Picture]
Valve Tappet - ADJUSTABLE tappet. Priced EACH. Fits: 9N, 2N, 8N. Note: Qty 8 used in engine. (Part No: A0NN6500A)$15.99 [Show Picture]
Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. (Part No: 8WR1770)$18.26 [Show Picture]
Valve, Exhaust - Exhaust valve using solid guide. Uses 7HA6518 lock. For Models: 2N, 8N, 9N. (Part No: 8N6505A)$14.2 [Show Picture]
Valve, Exhaust, Free-rotating - Exhaust valve for free-rotating type. Uses solid guide & EAM6518A lock. For Models: 2N, 8N, 9N. (Part No: 8N6505C)$10.50 [Show Picture]
Valve, Intake - Intake valve using solid guide. Uses 7HA6518 lock. For 2N, 8N, 9N (Part No: 8BA6507A)$12.98 [Show Picture]
 
Engine Pistons and Sleeves
Cylinder Sleeve, .005 oversize .040 - Oversize replacement for .040 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.273 inches - .005 larger than original. Sleeve is .0425 thickness to retain original piston bore of 3 3 16 inches. For Models: 2N, 8N, 9N. (Part No: S1135A2)$39.24 [Show Picture]
Cylinder Sleeve, .005 oversize .090 - Oversize replacement for .090 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.373, .005 larger than original. Sleeve is .0925 thickness to retain original piston bore of 3 3 16 inches. For 2N, 8N, 9N. (Part No: S1137-2)$39.23 [Show Picture]
Cylinder Sleeve, .040 - For models: 9N, 2N, 8N. This Sleeve is.040" thin-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: C0NN6055B)$28.46 [Show Picture]
Cylinder Sleeve, .050 - Wall sleeve for use with.0825 oversize pistons. For Models: 2N, 8N, 9N. (Part No: S1138)$37.59 [Show Picture]
Cylinder Sleeve, .090 - For models 9N, 2N, 8N. This Sleeve is.090 Heavy-wall for 3 ring and 4 ring pistons. Priced as each. (Part No: 8N6055B)$25.79 [Show Picture]
Piston Pin Bushing - For models 9N, 2N, 8N. This piston pin bushing is.735 ID. Price shown is EACH, minimum order QTY is 4. (Part No: 21A6207A3)$4.08 [Show Picture]
Piston and Sleeve Kit, 3 Ring, .040 Sleeves - Kit contains C0NN6055B .040" sleeves, 8N6108B 3 ring pistons, chrome top & oil rail (8N6149G1) rings, pins & retainers. For Models: 2N, 8N, 9N. (Part No: APN6055E)$161.38 [Show Picture]
Piston and Sleeve Kit, 3 Ring, .090 Sleeves - Kit, (4) sleeves, pistons, chrome rings, piston pins and pin retainers. For 2N, 8N, 9N, (Part No: APN6055A)$156.36 [Show Picture]
Piston and Sleeve Set - Super Piston Set For 9N, 2N, 8N Increased horsepower up to 5% by use of.0825 wall sleeve, same outside diameter as heavy wall sleeve. Can be used in any application where.090 wall thickness sleeves are used..050 wall sleeves, .0825 oversize 4-ring pistons. ``Comes with Sleeves, Pistons, Rings and Retainers. (Part No: PK11)$238.52 [Show Picture]
Piston, 3 Ring - For models 9N, 2N, 8N. This is a single 3 ring piston with standard bore can be used with .040 thin wall sleeves or.090 thick wall sleeves, and a 3 16 oil ring. (Part No: 8N6108B)$23.06 [Show Picture]
Piston, 4 Ring, With 3/16 Oil Ring - For models 9N, 2N, 8N. This is a single piston with a standard bore, 3 16 oil ring. Piston comes with Pin and Lock. This Price is for STANDARD. OVERSIZE ARE AVAILABLE, Please Specify size of std, .020, .030, .040, or .0825 in 'comments' when ordering. (Part No: P1003)$33.99 [Show Picture]
Piston, 4 Ring, With 5/32 Oil Ring - For models 9N, 2N, 8N. This is a single piston with 5 32 oil ring, standard bore. (Part No: 2N61084RS)$36.39 [Show Picture]
Sleeve and Piston Set - 1 Hole - 3 Ring Piston - .040 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT3A)$43.11 [Show Picture]
Sleeve and Piston Set, 1 Hole - 3 Ring Piston - .090 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 9N, 2N, 8N. (Part No: SAT6A)$45.77 [Show Picture]
 
Engine Rings
3 Ring Piston Ring Set with Chrome Top Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard Bore, CHROME top ring, 2@3 32 comp, 1@3 16 oil. Complete set for one engine. (Part No: 8N6149G1)$32.76 [Show Picture]
3 Ring Piston Ring Set with Chrome Top Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard Bore, CHROME top ring, 2@3 32 comp, 1@3 16 oil. Complete set for one engine. (Part No: 8N6149G1)$32.76 [Show Picture]
Piston Ring Set , 4 Ring, - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard Bore, Cast Iron rings, 2@3\32 comp, 2@5 32 oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149-4RS)$40.10 [Show Picture]
Piston Ring Set, .0825 Oversize - Plain top ring, 3 16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-0)$41.52 [Show Picture]
Piston Ring Set, 3 Ring - For Models: 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard 3 Ring, CHROME top ring, 5 32 steel rail oil. Complete set for one engine. (Part No: 9N6149A)$43.52 [Show Picture]
Piston Ring Set, 3 Ring, Plain - For 9N, 2N, 8N. 1939-1952 4 cylinder gas Standard, Plain top ring, 3\16" steel rail oil. Complete set for one engine. (Part No: 8N6149A5)$23.51 [Show Picture]
Piston Ring Set, 3 ring - For models 9N, 2N, 8N. Ring set for 3 ring piston with standard bore. This is a SINGLE piston ring set with 3 16 oil ring. (Part No: RST6G1)$8.50 [Show Picture]
Piston Ring Set, 4 Ring - Chrome .030" O.S., 3 16" steel rail oil. For 2N, 8N, 9N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-030)$39.62 [Show Picture]
Piston Ring Set, 4 Ring, - For models 8N, 9N, 2N. 1939-1952 4 cylinder gas Standard Bore, Cast Iron rings, 2@3\32 comp, 2@5 32 oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149-4RS)$40.10 [Show Picture]
 
Exhaust System
Clamp - Bracket, rear muffler. EXACT of ORIGINAL. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 9N5260)$26 [Show Picture]
Exhaust Manifold Gasket - SINGLE gasket (TWO gaskets required) for exhaust manifold on 9N, 2N, 8N. (Part No: 9N9448)$1.99 [Show Picture]
Extension Pipe - Vertical two-piece exhaust pipe with clamp, less muffler. For use without muffler, straight through design for maximum exhaust flow-more power. Vertical height remains the same as assemblies with muffler. Inlet 1-1 2" I.D.Outlet 1-1 2" O.D. For 2N, 8N, 9N, (Part No: M104)$28.61 [Show Picture]
Manifold - High Quality Intake and Exhaust Manifold w Gaskets. For 9N, 2N, 8N. (Part No: 9N9425WG)$78.11 [Show Picture]
Manifold Nut & Washer Kit - Brass nut & washer kit (Kit contains 4 nuts & 4 Washers) for intake & exhaust manifold. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 33816-KIT)$11.26 [Show Picture]
Muffler - Heavy-duty horizontal muffler only. Inlet 1-1 2" I.D., outlet 1-1 2" O.D., body length 23". For 2N, 8N, 9N. Does not come with hardware. (Part No: M1002)$45.22 [Show Picture]
Muffler Clamp - Flanged Muffler Clamp. For Models: 8N, 2N, 9N. (Part No: FP185)$5.50 [Show Picture]
Muffler and Pipe Assembly - Horizontal muffler & pipe, one piece welded assembly for 9N, 2N, 8N with under-hood exhaust. (Part No: 8N5230)$26.99 [Show Picture]
Stainless Steel Exhaust Pipe - Horizontal, free flow exhaust, fits the same as original but there is NO Muffler. It simply has the appearance of a muffler. For Models: 2N, 8N, 9N. (Part No: R4883)$198.45 [Show Picture]
 
Fuel System / Air Intake
Air Cleaner Assembly - Fits 9N, 8N. Restoration Quality Air cleaner Assembly, Painted Red. Includes Air cleaner, & cup (with mesh). Will not accurately replace the style with the top wire mesh without modification. This Assembly has a solid cap with hole which can be cut off and replaced with a similar screen and lid or left as is, depending on the needs of the user. (Part No: 8N9600B)$81.15 [Show Picture]
Air Cleaner Clamp - For Models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 840, 850, 851, 860, 861, 871, 881, 8N, 900, 901, 941, 950, 951, 960, 961, 971, 981, 9N, NAA, NAB. (Part No: 311508)$11.86 [Show Picture]
Air Cleaner Clip - Clips are for air cleaner 8N9600B. Not exactly like original, works the same. (Part No: 9N9678)$6.20
Air Cleaner Cup - Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B (Item 'D' in picture is available for an additional charge. (Part No: S.61648)$29.40 [Show Picture]
Air Cleaner Cup Gasket - For air cleaners with thumb screw clamp (15-1 4" long). Tractors: 9N, 2N, 8N, (1939-1952). (Part No: 9N9623A)$6.44 [Show Picture]
Air Cleaner Cup Set - Includes air cleaner cup, inner cup, clamp. VERIFY MEASUREMENTS. Cup ID is approx 4.5in., Cup Height is 3in. Replaces 311507. (Part No: 696300)$26.53 [Show Picture]
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2in x 3-1 4in. (Part No: S.43231)$9.90 [Show Picture]
Air Cleaner Hose Clamp - Clamp, air cleaner to carburetor pipe. Tractors: 9N, 2N, 8N, NAA (1939-1954). (Part No: 9N9653)$5.6 [Show Picture]
Air Cleaner Screen - Air cleaner screen. For tractors: 8N (1948-1952). (Part No: 8N9669)$27.74 [Show Picture]
Air Cleaner Tube - For Models: 2N, 8N, 9N. Air Cleaner Tube, Air Cleaner to Carburetor. (Part No: 9N18215C)$23.42 [Show Picture]
Air Funnel Assembly - Fits on model 8N. (Part No: 8N9684)$11.11 [Show Picture]
Air Hose to Carburetor - 1.5 Inches - For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3 8 inches long, 1 1 2 inch inside diameter. (Part No: 9N9652)$2.26 [Show Picture]
Carb Gasket Set - For Models: 9N, 2N, 8N. (Part No: 9N9502)$2.7 [Show Picture]
Carburetor Elbow & Strainer - For Models: 2N, 8N, 9N, NAA, NAB, Jubilee. (Part No: 9N9553)$6.44 [Show Picture]
Carburetor Float - For Carburetor Models: 10850, 13876, 13877, 12493, 13879. For Tractor Models: 8N, 900, NAA. (Part No: CTP28)$22.00
Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3 8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A)$11.8 [Show Picture]
Carburetor Kit, Basic - For Zenith 13876 carburetor on 2N, 9N, 8N. (Part No: BK44V)$29.76 [Show Picture]
Carburetor Kit, Comprehensive - For models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX33, Ford 9N9510A. Kit contains all parts necessary for major carburetor overhaul, including a Viton float valve. For 2N, 8N, 9N. Does NOT include float. (Part No: C545V)$31.46 [Show Picture]
Carburetor Throttle Shaft & Lever - For Marvel Schebler carburetor on 2N, 8N, 9N. (Part No: 9N9581A)$8.9 [Show Picture]
Carburetor Venturi - Venturi for original Marvel Carburetors. For Models: 2N, 8N, 9N. (Part No: C5NN9586B)$12.68 [Show Picture]
Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 9N, 2N, 8N, 1939-1952. New Zenith carb replaces TSX33, TSX241B, TSX241A, TSX241C and OEM# 8N9510C. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 13876)$198.12 [Show Picture]
Carburetor, Rebuilt - Fits 8N, 9N, 2N - replacement for OEM TSX33, TSX241B. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1302-CARB)$144.50
Choke Control Rod Assembly - Pre-bent Choke Control Rod is 29 1 2 inches long. Does NOT come with knob. For tractors: 9N, 2N, 8N (1939-1952). See part number 9N9815 for Throttle to Governor Rod. (Part No: 9N9700)$41.18 [Show Picture]
Choke Fly Assembly - Choke fly assy. 1-5\16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549)$15.60 [Show Picture]
Choke Knob - For tractors: 9N, 2N, 8N (Part No: 9N9703)$14.94 [Show Picture]
Choke Lever & Shaft - For Models: 2N, 8N, 9N. (Part No: 9N9546)$6.24 [Show Picture]
Cyclone Cup and Spring Assy - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053)$26.42 [Show Picture]
Cyclone Air Cleaner Glass Jar - For 8N, 2N, 9N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056)$27.33 [Show Picture]
Cyclone Air Cleaner Rubber Seal - Rubber Seal, For CYCLONE Air cleaner only. Exact of original. Minimum order Qty is 2. (Part No: 230055)$9.1 [Show Picture]
Cyclone Cup and Spring Assembly - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053)$26.42 [Show Picture]
Fuel Cap - For 2N, 8N, 9N, 600, 800, NAA Fuel Cap. This is a non-vented cap. (Part No: D5NN9030A)$9.98 [Show Picture]
Fuel Cap, Vented - 2-5 8" O.D, chrome Finish, 1-3 4" edge of tang to edge of tang, vented, includes gasket. For Models: 9N, 2N, 8N, Jubilee, Golden Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Part No: C5NN9030D)$9.90
Fuel Cap, Zinc - Original style cap fits 9N, 2N, 8N. Made of Zinc. (Part No: 9N9030Z)$7.50 [Show Picture]
Fuel Line - For models 9N, 2N, 8N, (1939-1952).This fuel line is from sediment bowl to carburetor. Consists of: 1 4 inch steel tubing with two 1 4 inch inverted flair fittings installed. (Part No: 9N9282A)$33.06 [Show Picture]
Fuel Line Anti-Rattler - For 9N, 2N, 8N 1939-1952. Fuel Line Anti-Rattler between fuel line and tank. Restoration Quality. Sold only in multiples of 2, price is for 1. (Part No: 9N9121A)$19.4 [Show Picture]
Fuel Sediment (SHORT) Bowl Assy - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B with short bowl. (Part No: 2NAA9155B)$15.25 [Show Picture]
Fuel Sediment Bowl Bail assembly - For tractors 9N, 2N, 8N, NAA, Jubilee. (Part No: 2N9166)$1.92 [Show Picture]
Fuel Sediment (SHORT) Bowl Assembly - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B with short bowl. (Part No: 2NAA9155B)$15.25 [Show Picture]
Fuel Sediment Bowl Bail assembly - For tractors 9N, 2N, 8N, NAA, Jubilee. (Part No: 2N9166)$1.92 [Show Picture]
Fuel Sediment Bowl GASKET - Gasket, sediment bowl. 2" O.D. Tractors: 9N, 2N, 8N (1939-1952), NAA, 600, 700, 800, 900 (1953-1957). (Part No: NAA9160A)$0.82 [Show Picture]
Fuel Sediment Glass Bowl With Gasket - 2 in. Glass Bowl W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 2N, 9N, 8N, NAA, Jubilee. (Part No: 9N9162)$2.84 [Show Picture]
Fuel Sediment Screen and Gasket - Gasket & Screen Set (for 2"OD Sediment Bowl), Ford 9N, 2N, 8N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 2NAA916061)$1.76 [Show Picture]
GASOLINE ADDITIVE 16 OZ - Star*Tron Gasoline Additive 16 oz. Treats 256 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG16)$22.95 [Show Picture]
GASOLINE ADDITIVE 8 0Z - Star*Tron Gasoline Additive 8 oz. Treats 128 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Part No: STG8)$19.78 [Show Picture]
Gasoline Fuel Tank, Steel - Gasoline Fuel Tank (Steel) For 9N, 2N, 8N. (Part No: 9N9002)$132.99 [Show Picture]
Harco 1/2 Pint Jar - 1 2 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP2131)$4.16 [Show Picture]
Harco Air Cleaner - For 8N (1948-1952) Harco style side mount air cleaner assy with jar and clamp, mounts over air door hole in hood (side mount). (Part No: AC2H18N)$151.77 [Show Picture]
Harco Pint Jar - 1 pint jar for Harco Air cleaner (side mount) on 8N. (Part No: ACP1237)$11.78 [Show Picture]
Harco Spring and Bail Assembly For 1/2 Pint Jar - Fits Harco 1 2 pint jar. Spring and bail assembly for Harco air cleaner (side mount)on 8N. (Jar NOT included). (Part No: ACP2133)$25.78 [Show Picture]
Harco Spring and Bail Assembly for 1 Pint Jar - 1 pint jar spring and bail assembly for Harco air cleaner (side mount) on 8N. (Jar NOT included). (Part No: ACP2134)$26.76 [Show Picture]
Harco Spring and Bail Assy For 1/2 Pint Jar - Fits Harco 1 2 pint jar. Spring and bail assembly for Harco air cleaner (side mount)on 8N. (Jar NOT included). (Part No: ACP2133)$25.78 [Show Picture]
Main Adjustable Needle - Main adjusting needle. For Models: 2N, 8N, 9N. (Part No: 9N9565C)$4 [Show Picture]
Needle Valve - Viton float valve needle, seat & gasket assembly. Tractors: 9N, 2N, 8N, (1939 to 1952). (Part No: C3NN9564A)$3.46 [Show Picture]
Nozzle - Main nozzle. For Models: 2N, 8N, 9N. For Marvel-Schebler TSX241A, TSX241B, & TSX241C, TSX33, Ford 8N9510C, Ford 9N9510A. (Part No: 9N9530)$13.74 [Show Picture]
Quad Throttle Plate - For 8N. Quad Throttle Plate. (Part No: 8N9889A)$13.00 [Show Picture]
Quadrant Stop Kit - For Models: 2000 4 cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Golden Jubilee, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 cylinder from 1939 - 1964. (Part No: 9N521)$9.99 [Show Picture]
Quadrant Throttle Plate - For Models: 2N, 9N 1939-1947. (Part No: 9N9820)$32.95 [Show Picture]
Race Assembly - Upper race assembly. For 8N, 9N, 2N (Part No: 9N18188B)$32.9
Screw Kit 4 Per PKG - Screw kit, air cleaner funnel to hood, set of 4 screws & speed nuts. For tractors: 8N {1948-1952}. (Part No: 32940-KIT)$10.82 [Show Picture]
Sediment Bowl Valve Stem - Sediment Bowl Valve Stem w\wheel complete. For Models: 2N, 8N, 9N, NAA. (Part No: APN9194)$6.48 [Show Picture]
Throttle Control Arm Assembly - For Models: 9N, 2N. (Part No: 9N9805)$38.7 [Show Picture]
Throttle Control Lever Assembly - For Model: 8N. (Part No: 8N9805)$33.72 [Show Picture]
Throttle Control Rod Spring - For Model: 8N 1948-1952. (Part No: 8N9806)$6.44 [Show Picture]
Throttle Rod - Rod, governor to carburetor control rod assembly, 7 inches long, ball recepticle on both ends. For tractors: 9N, 2N, 8N (1939-1952). (Part No: 9N9818A)$26.84 [Show Picture]
Throttle Rod Spring Retainer - For Models: 9N, 2N. (Part No: 9N9812)$4.56 [Show Picture]
 
Gauges
Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A)$8.28 [Show Picture]
Gauge Kit, 8N - 8N Gauge Kit - (For 8N after s\n 263844) Consists of Proofmeter, 50 lb. Oil Gauge, and 30-30 Ammeter. (Part No: 8NGAUGEKIT)$53.90 [Show Picture]
Instrument Panel Light Assembly - 6 Volt Light Assembly. For Models: 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 8NN14662A)$27.03 [Show Picture]
Oil Pressure Gauge - For Models: 2N, 8N, 9N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. Replaces OEM#'s Ford:``FAD9273A and Massey Ferguson:506902M92. (Part No: S.61171)$16.96 [Show Picture]
Oil Pressure Gauge, 50lb - For Models: 2N, 8N, 9N. Oil Pressure Gauge, 50 lbs., 2" Body Diameter. (Part No: 9N9273A)$15.13 [Show Picture]
Oil Pressure Gauge, 50lb Black - For Models: 2N, 8N, 9N. Oil Pressure Gauge, 0-50 lbs., for 2 inch Diameter hole. (Part No: 9N9273A-BLACK)$15.13 [Show Picture]
Oil Pressure Gauge, 80LB, Black - For Models: 2N, 8N, 9N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 LB, dash or bracket mounted gauge with a bracket and studs 1 8" NPT thread. Repalces FAD9273A. (Part No: FAD9273A_Black)$16.95 [Show Picture]
Proofmeter - Proofmeter for 8N (1950 to 1952) Proofmeter assembly, MPH. (Part No: 8N17360A1)$33.02 [Show Picture]
Proofmeter Cable - Fits 8N with side mount distributor (1950-1952) 34 Inches Long. (Part No: 8N17365)$15.98 [Show Picture]
Proofmeter Cable - Steel - For 8N 1950 to 1952. Proofmeter Cable is Exactly Like Original, Metal Case, 33 inches long. (Part No: 8N17365B-STEEL)$30.00 [Show Picture]
SCREW KIT - SCREW KIT 3 PER PKG.Screw kit, throttle plate to instrument panel, set of 3. Tractors: 8N (1948-1952). (Part No: 28319-KIT)$2.26
Screw Kit - Screw kit, 3 per pkg. Screw kit, throttle plate to instrument panel, set of 3. Tractors: 8N (1948-1952). (Part No: 28319-KIT)$2.26
 
Hitch / Drawbar
Chain - CHAIN, Fixed drawbar safety chain assy, EXACT OF ORIGINAL. FOR tractors: 9N, 2N, 8N, Jubilee, NAA (1939-1954). (Part No: 9N5370)$83.34 [Show Picture]
Crank Arm, Leveling Box - For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E)$14.95 [Show Picture]
Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair- one right and one left). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, SUPER DEXTA, Jubilee. (Part No: 957E5967)$22.06 [Show Picture]
Eyelet Assembly, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1 1953 & newer), (4000 RowCrop 1 1953 & newer). (Part No: EC0N660A)$5.99 [Show Picture]
Eyelet Assy, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1 1953 & newer), (4000 RowCrop 1 1953 & newer). (Part No: EC0N660A)$5.99 [Show Picture]
HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)$19.76 [Show Picture]
HITCH BALL 10000LB 2-5/16 - 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)$22.94 [Show Picture]
HITCH BALL 10000LB 2-5\16 - 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)$22.94 [Show Picture]
HITCH BALL 15000LB 2-5/16 - 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)$23.40 [Show Picture]
HITCH BALL 15000LB 2-5\16 - 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)$23.40 [Show Picture]
HITCH BALL 2000LB - 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)$11.82 [Show Picture]
HITCH BALL 3500LB - Hitch ball. 2" ball size, 3\4" stud thread, 1-7\8" stud length, 3500 lb. max load capacity, one\two chrome hitch ball class. (Part No: CHB234)$12.14 [Show Picture]
HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)$13.88 [Show Picture]
HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)$19.76 [Show Picture]
Level Box Fork - Right - Fork, hydraulic lift leveling rod, Right Hand. Length 10-1 4". For 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N585A)$25.68 [Show Picture]
Level Box Handle - Lever handle. For 2000, 2N, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: 9N594)$14.95 [Show Picture]
Leveling Box - Economy - For models 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta. Working length of 19.5 to 27 inches. Pin holes are 3 4 inch. (Part No: ECON577AB)$24.95
Leveling Box Assembly - Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 9N, 2N, 8N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B)$45.09 [Show Picture]
Leveling Box Assembly - Right - Right Hand Leveling Box Assembly with fork. Adjusts 19 to 24 inches. For 2N, 8N, 9N, NAA, Jubilee. (Part No: 8N577A)$68.80 [Show Picture]
Leveling Box Assembly, Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 8N, 9N, 2N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B)$45.09 [Show Picture]
Leveling Box Assembly, Right - Right Hand Leveling Box Assembly with fork. Adjusts 21.5 inches. For 8N, 9N, 2N, NAA, Jubilee. (Part No: 8N577A)$68.80 [Show Picture]
Leveling Box Gear - Gear, leveling box pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA (Part No: B9NN568A)$13.4 [Show Picture]
Leveling Box Knuckle Pin - MUST ORDER IN QTY 2 PRICED EACH.``For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 9N, 2N, 8N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5 8 Pin Dia. 2 7 8 usable length. Takes our 3 16 Linch pin (P N DKP316). MUST ORDER IN QTY 2, PRICED EACH. (Part No: 9N595)$2.76 [Show Picture]
Leveling Box Knuckle, Right - Knuckle, Right Hand leveling assembly. Pin Holes are 5 8 of an inch. The shape of the one pictured may vary slightly from different manufacturer's. For Models: 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, JUBILEE, NAA. Uses 2 pins P N 9N595. (Part No: 957E566)$10.04 [Show Picture]
Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A)$34.89 [Show Picture]
Lift Arm - For 8N, 2N, 9N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement 32 inches. (Part No: 9N555B)$57.96 [Show Picture]
Lift Arm - 32 Inch - Cat 1 - Lift Arm - Red. Category 1. 32inch length, 7 8" holes in end sockets (swivel type). Replaces 180846M91 and 30543E91. (Part No: JSA1002R)$46.31 [Show Picture]
Lower 3-Point Pin Support Plate Gasket - Two used per tractor, sold individually. For Models: (9N s n 6019 and up), (2N mid 1939-1947). (Part No: 9N523B)$1.99 [Show Picture]
Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C)$21.76 [Show Picture]
Lower Link Support Shaft - For 2N, 9N Lower Link Support Shaft anchors lower lift arm to tractor. Does not come with nuts or pins. (Part No: 9N563)$27.34 [Show Picture]
Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B)$16.94 [Show Picture]
Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: NCA579B)$17.62 [Show Picture]
Stabilizer Arm Red - Arm only, red. Length 31-1\2 center to center. For Models: 2N, 600, 800, 8N, 9N, JUBILEE, NAA. (Part No: 230042R)$14.30 [Show Picture]
Stabilizer Kit Red - Complete kit, red. For 2N, 600, 800, 8N, 9N, Jubilee, NAA. ** $10 added to shipping due to weight **. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 231253)$46.85 [Show Picture]
Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 9N, 2N, 8N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets w pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 231253XHD)$59.6
Stay Strap, Lower Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375)$11.64 [Show Picture]
Stay Strap, Upper Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374)$11.3 [Show Picture]
Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. 600, 800, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. (Part No: C0NN805F)$43.35 [Show Picture]
Swinging Drawbar Clevis Assembly - Clevis assembly with pins for SDA6 or SDA8 kits. For Models: 8N, 8N, 2N, Jubilee, NAA, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2120, 2121, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4120, 4130, 4131, 4140. (Part No: NCA803B)$29.64 [Show Picture]
Swinging Drawbar Hanger - Drawbar hanger. For 600, 8N, NAA, (Part No: NCA809A)$42.51 [Show Picture]
Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. (Part No: 49A34R)$131.49 [Show Picture]
Thrust Bearing - Bearing assembly. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: 9N554)$11.99 [Show Picture]
Top Link - Top link, 19" body. 1-1 4" Category III ball joints. Forged end with 1-3 8" threads. Swedged steel center section. Adjusts 25-1 2" to 36-1 2" overall. Dichromate plated. (Part No: TL185)$69.39 [Show Picture]
Top Link Rocker - For 9N, 2N, 8N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A)$55.46 [Show Picture]
 
Hydraulic System
Bushing - Bushing for hydraulic pump base, for PTO shaft. For 2N, 9N, 8N. (Part No: 9N649A)$29.94 [Show Picture]
Bushing Insert - Hydraulic Pump Bushing Insert. (Part No: 192164)$5.38 [Show Picture]
Cam Block - For hydraulic pump, 9N, 2N and 8N (1939-52). (Part No: 9N617A)$55.70 [Show Picture]
Chamber Kit - Repair kit for one hydraulic pump chamber. Fits either Left or Right. For 2N, 9N, 8N (Part No: 9N621KIT)$25.80 [Show Picture]
Draft Control Plunger - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B)$34.95 [Show Picture]
Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B)$35.48 [Show Picture]
Draft Control Spring Plate - For Models: 9N, 2N (1939-1947). (Part No: 9N527)$20.56 [Show Picture]
Draft Control Spring Plate, with Pin - For Models: 8N, NAA (1948-1954). (Part No: 8N527_)$22.55 [Show Picture]
Draft Control Yoke - Fits 9N, 2N, 8N. (Part No: 9N546C)$31.11 [Show Picture]
Felt, Spring Seat - Hydraulic lift draft control spring seat. For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529)$4.52 [Show Picture]
Friction Disk - Hydraulic Control Lever. 3" dia. 1 2" hole. For Models: 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Price is for each. (Part No: C5NN518B)$2.00 [Show Picture]
Gasket, Hydraulic Cylinder to Center Housing - 1" OD, 7 16" ID. For Models: 2N, 8N, 9N. ``** Sold in quantities of 10, priced each. (Part No: 9N552)$.49 [Show Picture]
Gasket, Hydraulic Pump Drain - Fits 9N, 2N, 8N. Sold in lots of 5, Priced each. (Part No: 8N7011)$1.16 [Show Picture]
Hydraulic Lift Control Quadrant - For Models: 9N, 2N, 8N. Hydraulic lift control lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 800, 900, 700, all 1939-1964 4 cylinder. Replaces 2N516A, 2n516A2. (Part No: 9N515)$25.00 [Show Picture]
Hydraulic Lift Cover Repair Kit - For 9N, 2N, 8N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 Valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928)$9.72 [Show Picture]
Hydraulic Lift Cylinder - For 9N, 2N, 8N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Part No: 9N510D)$86.40 [Show Picture]
Hydraulic Lift Level Indicator (Dip Stick) - 9N, 2N, 8N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C)$6.08 [Show Picture]
Hydraulic Lift Lever - For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cyl.). (Part No: S.66598)$26.70 [Show Picture]
Hydraulic Lift Piston - Single groove piston 2-1 2" dia., groove is centered 1 1 4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For Models: NAA, NAB, 2N, 8N, 9N. (Part No: NAA530B)$26.20 [Show Picture]
Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314)$35.53 [Show Picture]
Hydraulic Lift Piston O-Ring - For 9N, 2N, 8N. O-Ring used on piston #NAA530B. Price is for each. Used with lift piston washer #NAA473A. NOTE: The leather washer goes on first, then the o-ring. (Part No: NAA533A)$1.04 [Show Picture]
Hydraulic Lift Piston Rings - Kit of 3, steel, fits piston 9N530B. For Models: 2N, 8N, 9N. (Part No: 9N675)$12.64 [Show Picture]
Hydraulic Lift Piston Washer - For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston #NAA530B. Price is for each. (Part No: NAA473A)$2.6 [Show Picture]
Hydraulic Lift Ram Arm - For 2N, 8N, 9N. This part will work for the 2N, 9N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and or shortening one end 1 4 inch and adjusting with shims. (Part No: 8N545B)$62.06 [Show Picture]
Hydraulic Lift Shaft Arm - For 2N, 8N, 9N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B)$60.68 [Show Picture]
Hydraulic Lift Shaft Bushing - 2 used. I.D. 2.000, O.D. 2-3\8, L. 3.00. For Models: 2N, 8N, 9N, NAA, 600, 800, 2000, 3000, 4114. (Part No: 9N531C)$23.7 [Show Picture]
Hydraulic Lift lever Assembly - For 9N, 2N, 8N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512)$41.94 [Show Picture]
Hydraulic Pump Drive Shaft - APPLICATION: 9N, 2N, 8N, ``SHAFT DIAMETER: 3 4 ", ``SHAFT OVERALL LENGTH: 13-1 16 ", ``END A TYPE: Key, ``END A SIZE: 3 4 ", ``END B TYPE: LH Thread, ``END B SIZE: 5 8 " . END A mates to coupler L601-14. END B mates to hub 191196. (Part No: 190760)$24 [Show Picture]
Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7\8 OD, 2 3\4 Center to center on holes. 6 spline center bore, 3\4 ID. (Part No: 54C2055)$41.39 [Show Picture]
Hydraulic Pump Overhaul Kit - For 9N, 2N, 8N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1)$199.00 [Show Picture]
Hydraulic Pump Rebuild Kit - Comprehensive - For Models: 9N, 2N, 8N (1939-52). Kit contains 2 cam blocks, 2 Pistons, 2 Chamber Repair Kits, PTO Shaft Bushing, Safety Valve, 2 Valve Chambers w Valves, Base Gasket, Sump Pump Gasket, 2 Side Gaskets, PTO Shaft Gasket, 2 Side Plate Gaskets. (Part No: S.61725)$385.56 [Show Picture]
Hydraulic Pump Rebuild Kit, Comprehensive - For models 8N, 9N, 2N (1939-52). Kit contains 2 cam blocks, 2 Pistons, 2 Chamber Repair Kits, PTO Shaft Bushing, Safety Valve, 2 Valve Chambers with Valves, Base Gasket, Sump Pump Gasket, 2 Side Gaskets, PTO Shaft Gasket, 2 Side Plate Gaskets. (Part No: S.61725)$385.56 [Show Picture]
Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For 9N, 2N, 8N. Polished Steel Finish. (Part No: 9N622)$131.75 [Show Picture]
Hydraulic Pump Valve Chamber Assembly, RH - Right hand valve Chamber with valves. For Models: 9N, 8N, 2N. (Part No: 9N621-ASSY)$106.92 [Show Picture]
Hydraulic Pump Valve Chamber Assembly, LH - Left hand valve chamber with valves. For Models: 2N, 8N, 9N. Cast Iron. (Part No: 9N622-ASSY)$106.92 [Show Picture]
Hydraulic Pump Valve Chamber Assembly, RH - Right hand valve Chamber with valves. For Models: 9N, 8N, 2N. (Part No: 9N621-ASSY)$106.92 [Show Picture]
Hydraulic Pump, New - For Models: 2N, 8N, 9N. (Part No: 8N605A)$590.63 [Show Picture]
Hydraulic Safety Valve Assembly - For Models: 9N, 2N, 8N. (Part No: 8N638)$27.86 [Show Picture]
Hydraulic Safety Valve Assy - For Models: 9N, 2N, 8N. (Part No: 8N638)$27.86 [Show Picture]
Hydraulic Spring Seat - For Models: 9N, 2N, 8N, NAA, 600, 900 (1948-1954). (Part No: 9N525B)$15.44 [Show Picture]
Hydraulic Valve Assembly - For (9N with 9N600 Pump Assembly), (2N with 9N600 Pump Assembly 1939-1947). Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640)$21.49 [Show Picture]
Hydraulic pump base to center housing Gasket - For Models: 9N, 2N, 8N. (Part No: 9N611)$1.65 [Show Picture]
Lift Cylinder Housing Gasket - For Models: 9N, 2N, 8N. (Part No: 9N553)$1.50 [Show Picture]
Lock Washer, Special - Hydraulic lift shaft to arm. For Models: 9N, 8N, NAA (1939-1954). (Part No: 9N550)$8.6 [Show Picture]
Pin, Hydraulic Lift Rocker - Lift rocker pin to rear end housing. 3 4" x 3.14". For Models: 9N, 2N, (1939-1947). (Part No: 352625S8)$7.3 [Show Picture]
Piston for Hydraulic Pump - For 9N, 2N, 8N (1939-52). (Part No: 9N615)$36.75 [Show Picture]
Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624)$11.28 [Show Picture]
Superior & Wagner Loader Hydraulic Pump Kit - Hydraulic pump kit for various loaders mounted on Ford tractors. Pump specifications: 14GPM @ 2000RPM, 3 4" round shaft with key, left hand rotation, Inlet port 1" NPT, Outlet port 3 4" NPT. Kit includes hyd. pump, foot flange bracket, 2 mounting bolts & washers, and 2 adapters. Replaces 3660. (Part No: L827-10X)$411.32 [Show Picture]
UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG400)$23.32 [Show Picture]
Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG400)$23.32 [Show Picture]
Valve chamber to base Gasket - For Models: 9N, 2N, 8N (1939-1942). (Part No: 9N613)$1.72 [Show Picture]
 
Implements
Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40)$6.20 [Show Picture]
CASTER ASSY, OLD STYLE - Tail wheel & hub assembly with grease fitting (4 x 8). Includes Wheel, Hub, Axle Bearing, and Bolt Assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)$116.36 [Show Picture]
Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting (4 x 8). Includes Wheel, Hub, Axle Bearing, and Bolt Assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)$116.36 [Show Picture]
HUB ASSY - Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)$34.53 [Show Picture]
Hub Assembly - Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)$34.53 [Show Picture]
TAIL WHEEL ASSY - 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)$43.95 [Show Picture]
TAIL WHEEL ASSY W/LAM TIRE - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)$125.98 [Show Picture]
Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)$125.98 [Show Picture]
 
Lights
Bracket - Bracket, headlight switch to dash. For tractors: 8N {1948-1950}. (Part No: 8N11671)$11.18 [Show Picture]
Clip - Clip, {rear lamp wire to brake actuating shaft} 2 required. For tractors: 8N, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N14565)$13.88 [Show Picture]
Clip Set - Set of 7 - Clip, headlight wiring to hood. Set of 7. For tractors: 9N, 2N, 8N {1939-1952}. Replaces OEM # 358297S32. 7 Required per tractor. (Part No: 358297S7)$10.52 [Show Picture]
HEADLIGHT SET - 12 VOLT - For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V)$181.45 [Show Picture]
HEADLIGHT SET - 6V - EXACTLY like original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. Spare sealed beam bulbs available as p n L4019. (Part No: 2N13005-6V)$179.74 [Show Picture]
HEADLIGHT, 12 VOLT - 12 Volt, 5-3 4" dia., sealed beam bulb. Fits 9N, 2N, 8N, Complete assembly is a copy of original headlight, IS NOT EXACTLY LIKE ORIGINAL. Single unit Replaces 13005C or 13006C assemblies (RH or LH). (Part No: S.66419)$47.22 [Show Picture]
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)$45.16 [Show Picture]
Headlight Bracket - ROUND right or left side. For Models: 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472)$15.22 [Show Picture]
Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Part No: FAA13102A)$4.36 [Show Picture]
Headlight, 12 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67893)$47.22 [Show Picture]
Headlight, 6 Volt CHROME RING - This headlight assembly is Complete with sealed beam bulb with steel socket, Chrome ring, Stamped TRACT-O-LITE in housing.Replaces 2N13006C, 2N13005C. (Part No: S.67892)$47.22 [Show Picture]
Headlight, 6 Volt, LH - Left Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13006C)$46.86 [Show Picture]
Headlight, 6 Volt, RH - Right Side for 9N, 2N, 8N, Complete assembly is A copy of original headlight. NOT EXACTLY LIKE ORIGINAL. (Part No: 2N13005C)$46.86 [Show Picture]
Knob, Light Switch - Aluminum. For Models: 9N, 2N, 8N, NAA, Jubilee. (Part No: 9N9703)$14.94 [Show Picture]
Light Rim - Head light door assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. (Part No: 2N13043)$23.25 [Show Picture]
Light Rim CHROME - For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. Replaces 2N13043. (Part No: S.67891)$17.01
Light Switch - For Models: 9N, 2N, 8N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B)$13.30 [Show Picture]
Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG)$38.73 [Show Picture]
Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)$65.65 [Show Picture]
Retainer 3 Per PGK - Clips, worklight bulb to rim retainer. Set of 3 {special clip to hold bulb assembly in rim}. For tractors: 8N, NAA {1949-1954}. (Part No: 8N15534)$12.38 [Show Picture]
Switch, Headlamp - Assembly with pigtail wire connectors. EXACT OF ORIGINAL. For Models: 9N, 2N, 8N (1939-1949). (Part No: 9N11652)$11.96 [Show Picture]
Switch, Light - Switch, Worklight. For Models: 8N, NAA (1949-1954). (Part No: 8N13740)$14.95 [Show Picture]
Tail Light Assembly - Exact as Original in Every Detail. Ford Duolamp (stamped in tailight housing) tractors: 9N, 2N, 8N (1939-1952) (Part No: 8N13404)$55.11 [Show Picture]
Tail Light Fender Bracket - FOR 9N, 2N, 8N (1939-1952). Left side. (Part No: 9N13471)$30.95 [Show Picture]
Tail Light Wire Clip - For 2N, 8N, 9N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668)$2.50 [Show Picture]
Tail Lite, License Light, Clear Glass Lens - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: 9N13445)$13.25 [Show Picture]
Tail Lite, License Light, Lens Gasket - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: FAA13447A)$4.90 [Show Picture]
Taillight Mounting Bracket - Exact of original. Mfg in USA. (Goes between tailight and fender bracket - mounting on top of 9N13470 or 9N13471.)For DUOLAMP tractors 9N, 2N, 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 1811, (2000, 4000 4-cyl), 1801 series. (1949-1954) (Part No: 8N13423)$20.66 [Show Picture]
Winged Headlight Bracket - Right Side. For Tractors: 9N, 2N, 8N, NAA. (Part No: 9N13472)$25.00 [Show Picture]
Work Light Assembly - 12 Volt - Worklight assembly, 12-volt seal beam with on off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-12V)$104.68 [Show Picture]
Work Light Assembly - 6 Volt - Worklight assembly, 6-volt seal beam with on off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-6V)$104.48 [Show Picture]
Work Light Assembly, OEM 6 Volt - Like original worklight assembly with on off switch. Includes fender bracket spacer. Does not include fender bracket. For tractors: 2N, 8N {1947-1951}. (Part No: 8N15500E)$138.27 [Show Picture]
Worklight Bulb, 6 Volt - Worklight bulb assembly, CLEAR lens. M.F.G. in U.S.A. For tractors: Early 8N {1949-1951}. (Part No: 8N15514E)$52.65 [Show Picture]
Worklight Kit, 6 Volt, Chrome - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For Models: 2N, 9N, 8N, NAA, 600, 800. (Part No: S.43377)$67.34 [Show Picture]
Worklight Mounting Socket - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Part No: 8N15532)$16.50 [Show Picture]
 
Miscellaneous
Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: 9N, 2N, 8N. (Part No: 1212406)$306.02 [Show Picture]
Historical Tractor Photographs - These beautiful black & White photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 16 photos (12in x18in.). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22994)$94.84 [Show Picture]
Tractor Cover - Fits 9N, 2N, 8N. VERY Heavy duty canvas type. Green colored. No Logos. (Part No: S.60175)$139.35
 
Oil System
Engine Oil Dipstick - For Models: 2N, 8N, 9N. (Part No: B2NN6750A)$8.7 [Show Picture]
Oil Dip Stick Tube - For 2N, 9N, 8N. Engine Oil level Dip Stick Tube. Replaces EBP6784A. (Part No: 8N6784)$11.5 [Show Picture]
Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A)$4.76 [Show Picture]
Oil Filler Cap - Oil filler breather cap. For tractors: 9N, 2N, 8N (1939-1950). Overall length is 3 5 8, 1 1 4 diameter tube and tube is 1 3 8 long. (Part No: 9N6766)$29.64 [Show Picture]
Oil Filler Cap with Element - For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, ``801, 811, 821, 841, 851, 861, 871, 881, ``900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5 8, 1 1 2 diameter tube and tube is 1 3 8 long. Also replaces OEM 8N6766B. (Part No: 310030)$12.46 [Show Picture]
Oil Filter - Filter element & gasket for tractors: 9N, 2N, 8N (1939-1952), 340. For Balers: 166, 271, 272, 273, 283, 286. (Part No: APN6731B)$11.54 [Show Picture]
Oil Filter-Tripac - Tri-pac of oil filter elements. 3 cartridge type ( APN6731B ) Filters. For 2N, 8N, 9N. (Part No: APN18649B)$25.85 [Show Picture]
Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG)$23.56 [Show Picture]
Oil Pick Up Tube - For Models: 2N, 8N, 9N. (Part No: 8N6615)$47.95 [Show Picture]
Oil Pump Body - For Models: 9N, 2N & 8N to S N 247571. For pumps with 9 16 inch gear width. Pump body assembly does not include gears. (Part No: 9N6603)$112.86 [Show Picture]
Oil Pump Bushing - Fits 9N, 2N, 8N. ``***Minimum order QTY is 5*** (Part No: 9N6612A)$6.36 [Show Picture]
Oil Pump Gasket - For 9N, 2N, 8N.``***Min order qty is 10*** (Part No: 9N6619)$0.99 [Show Picture]
Oil Pump Gear - Gear, oil pump driven, width 9\16. For Models: 2N, 8N, 9N. (Part No: 52-6610B)$24 [Show Picture]
Oil Pump Gear, Drive - Gear, oil pump drive, gear width 3\4. For Model: 8N. (Part No: 8N6614)$59.44 [Show Picture]
Oil Pump Gear, Driven - Gear, oil pump driven, gear width 3\4. For Model: 8N. (Part No: 8N6610)$40.67 [Show Picture]
Oil Pump Kit - Complete oil pump repair kit for Ford 9N, 2N, 8N prior to serial# 247570 (1939-1948). For pumps with 9 16" gear WIDTH. Early & late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600A)$41.77 [Show Picture]
Oil Pump Relief Plunger Spring - Oil Pump Relief Plunger Spring.``For Tractors: 9N, 2N, 8N (1939 to 1952). **must order in multiples of 4 units** Priced Each. (Part No: 9N6654)$2.62 [Show Picture]
Oil Pump Tool - A complete tool set with jig, punches and reamer. For Models: 2N, 8N, 9N. (Part No: OPT20)$110.55 [Show Picture]
Oil Relief Valve Inlet Gasket - Must be ordered in quantities of 5, price is for 1. For Models: 9N, 2N, 8N. (Part No: 1GA6669)$0.52 [Show Picture]
Oil Terminal Block - Oil Gauge to Block Elbow. 1 4 inch taper pipe thread. For 8N, 1948-1952. (Part No: 8N6722)$9.24 [Show Picture]
Plunger - Plunger, oil pump relief valve. For tractors: 9N, 2N, 8N, (1939 to 1952). The Spring is available seperately as 9N6654, pack of 4. (Part No: 01A6663)$19.42 [Show Picture]
 
PTO / Driveline
Bearing, PTO Shaft - Front PTO shaft bearing, 2 3 8 inches O.D. 1 3 16 I.D. 5 8 width. For 2N, 8N, 9N, NAA (1953-54), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. (Part No: 9N715BC)$4.18 [Show Picture]
PTO CAP - For Models: 9N, 8N, 2N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. NOT LIKE ORIGINAL. (Part No: 310088)$5.58 [Show Picture]
PTO Cap - Cap for all Ford Models 1939-64. Like original. 3 1 2 inches in length. Inside usable length is 2 7 8 inches. (Part No: 310088-OEM)$22.40
PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Part No: NAA70038C)$7.59
PTO Housing Gasket - PTO Housing Gasket. For 2N, 9N, 8N, NAA, all through 1954. (Part No: C5NN747A)$.99 [Show Picture]
PTO Shaft - PTO Shaft For 9N, 2N, 8N (converts 1 1 8" shaft to 1 3 8" spline. This is the shaft only. (Part No: 9N710-38)$42.42 [Show Picture]
PTO Shaft Conversion Assembly - Shaft assembly with cap converts 1-1 8 inch PTO system to 1-3 8 inch. Assembled and ready to install by removing 4 bolts from cover. Length 30-7 8 inches. (Part No: 9N700-38)$92.90 [Show Picture]
PTO Shaft Housing - For 8N, 9N, 2N, (NAA 1953-54), Jubilee, NAB. (Part No: 9N733B)$28.91 [Show Picture]
PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1 8" or 1-3 8" PTO shaft. 2.45 O.D., 1 5 8 I.D., 5 8 wide. Replaces OEM#s : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB)$3.64 [Show Picture]
PTO Shaft Sleeve Bushing, 1-1/8" - For 1-1 8in. PTO shafts (NOT 1-3 8in.)1.113" I.D, 1.620" O.D, 1" thick. For Models: 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 9N735B)$4.80 [Show Picture]
PTO Shaft Sleeve Bushing, 1-3/8 - For 1-3 8" PTO Shafts, 1.185" ID, 1.620" OD. For Models: 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 all with 1-3 8" PTO shaft. (Part No: 9N73538)$4.80 [Show Picture]
PTO, Snap Ring - For Models: 2N, 8N, 9N, NAA all 1943-54. 2.58 inches O.D., 2.26 inches I.D. Must be ordered in quantities of 2, Priced indvidually. (Part No: 9N754)$1.76 [Show Picture]
 
Paint
Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL)$42.16
Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT)$24.74
Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP)$42.52
Paint, Dark Gray, 1 Gallon - For tractors: 9n, 2n (1939 to 1947). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2888GAL)$42.16
Paint, Dark Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888QT)$24.74
Paint, Dark Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888SP)$42.52
Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For Models 1963 and up. (Part No: TP360GAL)$42.24
Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL)$76.56
Paint, Ford White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP)$51.68
Paint, Medium Gray, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL)$42.24
Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL)$42.24
Paint, Vermillion Red, 1 Gallon - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822GAL)$42.24
Paint, Vermillion Red, 1 Quart - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822QT)$24.74
Paint, Vermillion Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For models (1948-1957). Vermillion Red. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822SP)$43.56
Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL)$76.56
Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics (Part No: TP365QT)$28.64
Paint, Vibrant Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP)$51.68
 
Seats
Flip-Over Seat Spring, Hinge & Bolt Assembly - For flip-over seats on 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4-cylinder gas. Seat not included. Equivalent to NCA404B and NCA436A. (Part No: R0642R0643)$55.19 [Show Picture]
Pan Seat - 19 inch wide fixed seat For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 2000, 4000, all with 4 cylinder engine. This is not a flip-over seat. (Part No: 8N400)$43.04 [Show Picture]
Rubber Bumper - Drivers seat to spring. For Models: 8N, NAA, NAB. All 1948-1954. Bumper has a 1 Inch Diameter. (Part No: 8N434B)$7 [Show Picture]
SEAT INDUSTRIAL - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)$91.75
SEAT,UNIVERSAL - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)$93.40 [Show Picture]
Seat Assembly, Black & White - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA888-5)$125.45 [Show Picture]
Seat Assembly, Blue - For Models: 2N, 9N, 8N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. Complete seat. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA887-8)$125.45 [Show Picture]
Seat Clip - For Models: 8N, NAA (1948-1954).This clip is for drivers seat to spring. This clip will only work with original 3 inch wide spring. Many of the replacement springs are 2 3 8 inches wide. (Part No: 8N433)$13.66 [Show Picture]
Seat Cushion (Blue and White) - For all ford tractors with 21 inch wide steel pan seat. This seat cushion is blue and white with a FORD script logo. (Part No: R4120)$33.00 [Show Picture]
Seat Cushion (Red and White) - Seat Cushion - Deluxe with 2in. of foam padding. For all ford tractors with 21 inch wide steel pan seat. This seat cushion is Red and white with a FORD script logo. (Part No: R4118)$33.00 [Show Picture]
Seat Cushion (Red) - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is red with a FORD script logo. (Part No: 8N401R)$46.68 [Show Picture]
Seat Cushion, Blue - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is blue with a FORD script logo. (Part No: 9N401B)$46.59 [Show Picture]
Seat Hinge - Fits Models:2000, 4000, 600, 800, 8N, 900, NAA. Can replace OEM 86531095. This hinge is made for the 2 3 8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Part No: R0643)$18.88 [Show Picture]
Seat Hinge Pin - Exact of original. For Models: 8N, NAA, Jubilee all from 1948 to 1954. (Part No: 352664S)$7.64 [Show Picture]
Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 800, 900, 2000, 4000 with 4 Cylinder Engine. 2 3 8 inches wide. May require modification of bolt holes for an original hinge. (Part No: NCA404B)$41.49 [Show Picture]
Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)$91.75
Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)$93.40 [Show Picture]
 
Sheet Metal / Body Parts
Air Cleaner Door - Air cleaner door w fastener. COMES PRIMERED, NOT PAINTED. For air cleaner opening in hood, for tractor 8N (1948-1952). Also for 9N & 2N when replacing hood with 8N16612. (Part No: 8N9661)$12.50 [Show Picture]
Battery Box - Fits 8N only. (Part No: 8N10732)$58.24 [Show Picture]
Battery Box Kit - Fits 8N- Includes Box, Hold Down, Cables & Bolts (Part No: SRP8NFB)$78.92 [Show Picture]
Battery Cover, Restoration Quality with Decals - Battery cover with access door, also with flat cable opening. Exact of original. Powder coated Ford red, decals included. For 8N (1948 to 1952). (Part No: 8N5162)$57.7 [Show Picture]
Battery Door - For 9N, 2N, 8N. Battery Door.Includes handle, hinge and latch. (Part No: 9N16938C)$29.25 [Show Picture]
Battery Door Handle Kit - Contains battery door latch with Handle and stud. For Models: 9N, 8N, 2N. (Part No: 9N16625-56)$26.52 [Show Picture]
Battery Door Hinge Kit - For Models: 9N, 2N, 8N. Contains hinge half for battery door and hood plus pin. (Part No: 9N16651-89)$24.38 [Show Picture]
Battery Hold Down - Bolt with nut. For Models: 2000, 4000, 600, 700, 800, 900, 8N. (Part No: NCA10728WN)$8.24 [Show Picture]
Battery Hold Down Assembly - Production style battery hold down kit consists of battery hold down cross bar, 2 battery hold down straps, and rubber insulator. For Models: (9N, 2N 1939-1942). (Part No: 9N10724-KIT)$39.99 [Show Picture]
Battery Hold Down Bolt - Bolt with nut. For Models: 8N, NAA (1948-1954). (Part No: 8N10728WN)$8.4 [Show Picture]
Battery Hold Down Bolts - Battery Hold Down Bolts with nuts for 9N, 8N, 2N. One NCA10728WN and one 8N10728WN. (Part No: NCA10718A-BOLTS)$12.15 [Show Picture]
Battery Hold Down Kit - For Models: 9N, 2N, 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000-4000 series (1953-1964). Dimensions of hold down, Width 9-1 4", length 7-1 4", center-to-center mounting holes 10-1 8". The short bolt included with this kit is not used on the 9N, 2N, 8N, NAA. A simple bolt is used but not supplied with this kit. (Part No: NCA10718A-KIT)$29.99 [Show Picture]
Battery Hold Down Rod - For Model: 2N, (1943-1947). (Part No: 2N10728)$11.68 [Show Picture]
Battery Hold Down Strap - Fits 9N10724 (goes through the cast dash). For 9N, 2N early, (1939 to 1942). (Part No: 9N10728B)$21.36 [Show Picture]
Battery Hold Down, Left Side - For Model: 9N (1943 to 1947). Ford improved design, originally sold in the mid 1940's. (Part No: 9N10748)$23.6 [Show Picture]
Battery Hold Down, Right Side - For Model: 9N (1943 to 1947). Ford improved design, originally sold in the mid 1940's. (Part No: 9N10728C)$23.6 [Show Picture]
Battery Hold-Down Retainer - For 9N, 2N, (1939-1947). Ford improved design was originally sold in the mid 1940's. (Part No: 2N10721)$32.69 [Show Picture]
Battery Tray - Has air cleaner mount. Also replaces 2N10734 and 2n10735. Powder coat gray. (Part No: 2N10732)$64.95
Battery, Door Handle Kit, Chrome - Chrome Latch kit. For Models: 9N, 2N, 8N. (Part No: S.60601)$20.66 [Show Picture]
Bolt Kit 8 Per PKG - Bolts for running board to running board bracket. Kit includes 8 running board bracket bolts, nuts and washers. For tractors:: 8N, NAA (1948-1954). (Part No: 355471-KIT)$29.16 [Show Picture]
Bolt Kit, Instrument Panel to Hood - Bolt, nut & washer kit. Bolt heads are EXACT as original. For 8N (1948-1952) (Part No: 355494-KIT)$9.12 [Show Picture]
Bracket Set For Lights - Fits rounded fenders. For Models: 2N, 8N, 9N, NAA, Jubilee. (Part No: 1750673M1)$37.98 [Show Picture]
Bumper Bolt Kit 4 Pieces - Bumper Bolt kit, front axle bolt kit, contains 2-3.40 bolts, 2-4 bolts, 4-351505s8 washers & hex nuts. For tractors: 9N, 2N, 8N, NAA, 600, 800 {1939-1957}. For 600, 700, 800, 900, NAA (Part No: 350790-KIT)$20 [Show Picture]
Bumpers 4 Per PKG - Rubber bumpers for gas filler lid door {set of 4}. For tractors: 9N, 2N, 8N {1939-1952}. (Part No: 11A16758A)$11.12 [Show Picture]
Fender - For Models: 9N, 2N, 8N. Rear fender, dished type, with mounting bracket. Additional $20.00 per fender shipping charge will be added due to the size & weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N16312)$108.18 [Show Picture]
Fender Bolt Kit 4 Per PKG - Bolt kit, rear fender bracket to axle housing, bolts 6 1 4 x 5 8, nut & washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, some early 2000 and 4000. (Part No: 355310-KIT)$36.41 [Show Picture]
Fender With FORD Script - Fender panel, steel. Has raised 'FORD' script. Panel comes primed. To install, remove fasteners from old panel and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N, 700, 900, NAA, JUBILEE(1939 to 1954), fits right side or left side. (Part No: FF101S)$185.99 [Show Picture]
Front Bumper - Heavy Duty - For 2N, 9N, 8N, . Front Bumper - Heavy Duty. Add an additional $15 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Welded, not rivited. Slightly different than original. (Part No: 311541HD)$91.64 [Show Picture]
Front Bumper - OEM Quality - Front bumper assembly with four bars for extra protection. Fits 9N, 2N, 8N. Made to take rugged service. Welded and riveted construction. Exact copy of the original OEM bumper. Add additional $15.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 311541OE)$213.57 [Show Picture]
Front Bumper, OEM Quality - Front bumper assembly with four bars for extra protection. Fits 8N, 9N, 2N. Made to take rugged service. Welded and riveted construction. Exact copy of the original OEM bumper. Add additional $15.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 311541OE)$213.57 [Show Picture]
Grill - Radiator grill assembly, with TEAR DROP grill bars. For tractors: 9N, 2N. Manufactured to restoration standards. (Part No: 9N8206D)$337.54 [Show Picture]
Grill Assembly, Radiator - Grill Bars. For tractors: 8N {1948-1952}. NEAR the Ford original. (Part No: 8N8204OE)$78.75 [Show Picture]
Grill Screen, Ferguson System, Blue - Fits 9N, 2N. Replaces 9N-8210. Complete with fasteners. Exactly like the original. (Part No: 9N8210)$144.78 [Show Picture]
Grill Screen, Ford Farming, Red - Fits 8N, Replaces 8N-8210. Complete with fasteners. Exactly like the original. 15 7 8" wide, 18 1 4" tall. (Part No: 8N8210)$136.40 [Show Picture]
Grill, Aluminum - Cast aluminum grill with horizontal bars, used on steel hood early 9N. For Model: 9N up to s n 50000. (Part No: 9N8206A)$275.98 [Show Picture]
Grill, Exact Copy - Radiator Grill 'NEW'. Tear Drop Grill Bars. For tractors: 8N {1948-1952}. Made by Dennis Carpenter and is exactly like the Ford original. (Part No: 8N8204DC)$337.54 [Show Picture]
Grille - After market version of grille. For 8N (1948-1952). Will fit 2N and 9N with modification - remove brackets from old grille and apply to new grille. (Part No: 8N8204)$58.25 [Show Picture]
Grille Assembly, Radiator - Grille Bars. For tractors: 8N {1948-1952}. NEAR the Ford original. (Part No: 8N8204OE)$78.75 [Show Picture]
Grille Screen, Ferguson System, Blue - Fits 9N, 2N. Replaces 9N-8210. Complete with fasteners. Exactly like the original. (Part No: 9N8210)$144.78 [Show Picture]
Grille Screen, Ford Farming, Red - Fits 8N, Replaces 8N-8210. Complete with fasteners. Exactly like the original. 15 7 8" wide, 18 1 4" tall. (Part No: 8N8210)$136.40 [Show Picture]
Grille, Exact Copy - Radiator Grille 'NEW'. Tear Drop Grille Bars. For tractors: 8N {1948-1952}. Made by Dennis Carpenter and is exactly like the Ford original. (Part No: 8N8204DC)$337.54 [Show Picture]
Hood - Includes battery cover. For tractors 9N, 2N, 8N. When used on 9N & 2N also order air cleaner door 8N9661. (Part No: 8N16612)$330.48 [Show Picture]
Hood Panel - Left Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16619)$61.13 [Show Picture]
Hood Panel Right - Right Hand Hood Panel For 9N, 2N, 8N (Part No: 8N16618A)$61.13 [Show Picture]
Hood, Door Latch Kit, Black - Door latch and handle with stud. For Models: 9N, 2N, 8N. (Part No: 9N16625B)$25.2
Hood, Door Latch Kit, Chrome - Door latch and handle with stud. For Models: 9N, 2N, 8N. (Part No: 9N16625C)$29.45 [Show Picture]
Hood, with Scripted FORD Logo - Logo is raised laminate (Not Stamped). For Model: 8N. (Part No: 920037)$489.45
Insulator, Battery Hold Down Strap - Rubber insulator for 9N10724 battery hold down bar. Fits 9N, Early 2N (1939 to 1942). (Part No: 01A10726)$6.42 [Show Picture]
Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K)$129.06 [Show Picture]
ROP Frame Assemply - Roll Over Protections - Cross Bar Type. Fits 9N, 2N, 8N, Dexta, 2000, 2100, 3000, 600, 700, NAA, 501, 601, 701. Due to truck freight of this 100 lb item, additional shipping above the regular shipping cost has already been added to the price. (Part No: MF1)$833.00
Running Boad Bracket, Left Rear - For Models: 8N (above S\N 263843), NAA. (Part No: 8N16487)$38.46 [Show Picture]
Running Boad Bracket, Right Rear - Fits 8N (above S\N 263843), NAA. (Part No: 8N16486)$41.67 [Show Picture]
Running Board - LH - Fits 8N. 1948-1952. Left hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16473)$164.41 [Show Picture]
Running Board - RH - Fits 8N. 1948-1952. Right hand side (as you are sitting on the tractor). Stamped steel square tread design like the original. Durable red powder coated finish. Includes mounting bolts. Brackets are NOT included. (Part No: 8N16472)$164.41 [Show Picture]
Running Board Bracket - Front - For Models: 8N, NAA, 600, 700, 800, 900, 601, 801, 2000, 4000, all WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket Right OR Left side. Price is EACH bracket. EXACTLY LIKE ORIGINAL. (Part No: 8N16470)$29.92 [Show Picture]
Side Panel Bolt Kit - Bolts 2 Per PKG, hood side panel to axle support bolt, nut & washer kit with dog point EXACT OF ORIGINAL. For tractors: 9N, 2N, 8N, {1939-1952}. (Part No: 350782-KIT)$10.52 [Show Picture]
Step Plate - Left - For 2N, 9N. Left Hand Step Plate. Includes rear bracket. 24 inches in length. (Part No: 180717M91)$49.98 [Show Picture]
Step Plate - Right - For 2N, 9N. Step Plate - Right. Includes rear bracket. 24 inches in length. (Part No: 191929M92)$49.98 [Show Picture]
Step Plate Bracket - For 9N, 2N. Step Plate Bracket (right or left) used on Step Plates #180717M91 & #191929M92. (Part No: S.42997)$20.80
Tool Box - Original Style - Tool Box. Ford 8N 1948-1952. Measures approx 11" L x 4.5" H x 5" D (tapers down to 2" D at opposite end). (Part No: 8N17005)$40.79 [Show Picture]
Toolbox - For models 9N, 2N. Match original size and style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308)$35.00
 
Steering
Axle Hardware Kit 4 PCS. - Bolt kit, front axle bolt, nut & washer. Holds right and left axles to center axle. For tractors: 9N, 2N, 8N {1939-1952}. For 600, 700, 800, 900, NAA (Part No: 350789-KIT)$20 [Show Picture]
Axle Pin Support Bushing - Brass Bushing For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778" I.D., 1.913" O.D., 1.5" L (not for heavy, industrial, or grove axles). (Part No: 2N3039)$9.52 [Show Picture]
Bearing Retainer - Steering Shaft Gear Thrust - For Models: 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Sold in quantities of 2 price is for 1. (Part No: 8N33581)$2.08 [Show Picture]
DRAG LINK -TIE ROD BOOT ASSORTMENT - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16" x 5 8" x 5 8", 1 15 16" x 3 4", 3 4", and 1 3 8" x 1" x 1 2". (Part No: TIERODBOOTS)$15.30 [Show Picture]
Drag Link - Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16" x 5 8" x 5 8", 1 15 16" x 3 4", 3 4", and 1 3 8" x 1" x 1 2". (Part No: TIERODBOOTS)$15.30 [Show Picture]
Drag Link Dust Cover - Steering drag link rear ball joint cover. For tractors: 9N, 2N, 8N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5 8 inch hole, Large end is 1 7 16 inch inside diamter. (Part No: 9N3324)$10.96 [Show Picture]
Drag Link End, Rear - Length 4.250", Diam .687", 18 RH thread. For Models: 2N, 8N, 9N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A)$13.79 [Show Picture]
Drag Link End, Front, Greasable - A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1 62 to 12 64), 4000(1 62 to 12 64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer. (Part No: NAA3270A)$13.40 [Show Picture]
Drag Link End, Front, Non-Greasable - Sealed, A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1 62 to 12 64), 4000(1 62 to 12 64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer. (Part No: NAA3270A-N)$13.40 [Show Picture]
Drag Link End, Front, RH Thread, Greasable - End assembly, Front, .687-18 Right Hand thread, 3.187in. from center of post to end of large thread. For 2N, 9N. (Part No: 9N3270)$11.79 [Show Picture]
Drag Link End, Front, RH Thread, Non-Greasable - Sealed, end assembly, Front, .687-18 Right Hand thread, 3.187in. from center of post to end of large thread. For 2N, 9N. (Part No: 9N3270-N)$11.79
Drag Link End, Greasable - Fits 8N 48-52 Used on front of drag link. Left Hand Threads. 3.375" long from center of post to end of large thread. Large thread diameter is .687in (11 16in.). (Part No: 8N3270)$11.50 [Show Picture]
Drag Link End, Non-Greasable - Sealed, fits 8N 48-52 Used on front of drag link. Left Hand Threads. 3.375" long from center of post to end of large thread. Large thread diameter is .687in (11 16in.). (Part No: 8N3270-N)$11.50
Drag Link End, Rear - Length 4.250", Diam .687", 18 RH thread. For Models: 8N, 9N, 2N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A)$13.79 [Show Picture]
Drag Link Tube - 34.5" long. Uses one RH (NAA3271A)and one LH (NAA3270A) Tie Rod End. For Models: 9N, 2N, (Used on RH side on early 8N & LH side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length..p n 8N33314D drag link tube was also used on 9N, 2N and 8N tractors..it is 32-3 4in. long). (Part No: 8N33315)$33.52 [Show Picture]
Drag Link Tube, - 32-3 4in. long. O.D. 0.875. Includes clamps (on each end), For 9N, 2N, 8N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length..p n 8N33315 drag link tube was also used on these tractors..it is 34-1 2 inch long). (Part No: 8N3314D)$33.17 [Show Picture]
Front Axle Assembly with Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W Manual 7-57 PS 55), 4000(W Manual 7-57 PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA)$208.83 [Show Picture]
Front Axle Assy W/ Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W Manual 7-57 PS 55), 4000(W Manual 7-57 PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA)$208.83 [Show Picture]
Front Axle Pin - For Model: 2N up to s n 167489. (Part No: 2N3126E)$57.71 [Show Picture]
Front Spindle - Right Hand Spindle For 9N, 2N. Heigth of spindle shaft is 11 inches. Keyway on inside is 5 16 inches. Notch on outside of shaft. (Part No: 2N3105)$78.76 [Show Picture]
Gasket, Steering Gear Housing, Front - For Models: 2N, 9N 1939-1947. (Part No: 9N3594)$6.44 [Show Picture]
Gasket, Steering Gear Housing, Rear - For Models: 2N, 9N 1939-1947. (Part No: 9N3593B)$6.44 [Show Picture]
Pin, Front Axle - OD 1.743in, ID 1.310in, L 4in. For models: 9N, 2N (s n 164489 & up), 8N. (Part No: 2N3126D)$24.50 [Show Picture]
Pin, Radius Rod to Front Axle - For Model: 8N 1948-52. (Part No: 357623S8)$7.12 [Show Picture]
Pitman Arm (LH/RH) - Steering Gear Pitman Arm for models 8N (SN 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743)$96.53 [Show Picture]
SPRING SEAT - For steering column bearing (without power steering). Tractors: 8N & up (1948 to 1964). (Part No: 8N3518)$5.90 [Show Picture]
Seal, Steering Column - Felt Dust for top of steering column. Tractors: 8N, NAA (1948-1954). (Part No: 8N3570)$3.38 [Show Picture]
Seal, Steering Gear, Sector Shaft - This is a replacement for the original Packing 8N3581 and the packing retainer 8N3591 on the 8N and NAA. For Models: 8N s n above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B)$11.2 [Show Picture]
Sector Bushing - Steering gear sector bushing is 1 1\2 inches long. For tractors: 8N, 8NAN to s\n 216988 {1948-1949}. 4 required per tractor, sold individually. (Part No: 8N3576A)$11.92 [Show Picture]
Shaft and Pinion Assembly - Fits 9N and 2N tractors 1939-47. Contains shaft and pinion only. For complete set use Part # SGS3. (Part No: 9N3525)$72.75 [Show Picture]
Spindle / King Pin Repair Kit - For 8N, 2N, 9N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986)$35.56 [Show Picture]
Spindle Bushing - FORD Spindle Bushing - 1.250inch I.D., 1.370inch O.D., 1.500inch Long Fits Models 2N 39-47, 8N 48-52, 9N, NAA 53-54, Jubilee.`` Sold in MINIMUM QTY of 4, PRICED EACH. (Part No: 2N3109)$5.14 [Show Picture]
Spindle Nut - Fits on front spindles. Castle Nut 3 4in. x 16UNF. Fits: 9N, 2N, 8N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36)$1.60 [Show Picture]
Spindle Thrust Bearing - For Models: 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, Jubilee, SUPER DEXTA. (Part No: C0NN3123B)$7.55 [Show Picture]
Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B)$86.18 [Show Picture]
Spring, steering column bearing. - Spring, steering column bearing. Tractors: without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520)$6.44 [Show Picture]
Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799)$65.79 [Show Picture]
Steering Arm Dust Seal - For Models: 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528)$3.00 [Show Picture]
Steering Column Collar - For 9N, 2N. Collar, retains dust seal in top of column. Exactly Like Original. WITHOUT GREASE FITTING HOLE. (Part No: 9N3669A)$11.84 [Show Picture]
Steering Column Collar w/Grease Fitting Hole - For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B)$11.92 [Show Picture]
Steering Column Collar with Grease Fitting Hole - For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B)$11.92 [Show Picture]
Steering Column Dust Seal - For Models: 9N, 2N. 1939-1957. (Part No: 9N3660)$6.44 [Show Picture]
Steering Column Retainer and Spring - For 9N, 2N. Steering Column Dust Seal and Spring. Exactly Like Original Spring and Seal. (Part No: 9N3699-9N3661)$8.95 [Show Picture]
Steering Column Shim Kit - 2"x .005", 2"x .010", 2"x .020". For Models: 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623)$21.08 [Show Picture]
Steering Gear Assembly - Complete manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. (Part No: S.67077)$640.22 [Show Picture]
Steering Gear Set - Fits 9N and 2N tractors 1939-47. Set contains one each of 9N3525 Shaft and pinion assembly, 9N3526 steering sector, right hand, and 9N3527 steering sector, left hand. (Part No: SGS3)$407.05 [Show Picture]
Steering Gear, Ball Bearing - 3 8" ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903)$0.44 [Show Picture]
Steering Gear, Double Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67671)$63.78
Steering Gear, Inner Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67672)$9.98
Steering Gear, Outer Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67673)$20.50
Steering Gear, Pitman Shaft Bushing - For Models: 8N, NAA 1949-1954. (Part No: 8N3553)$8.58 [Show Picture]
Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67668)$127.18
Steering Gear, Single Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For Models: 8N, NAA, Jubilee. (Part No: S.67670)$63.78
Steering Sector Gear (LH) - For models 9N, 2N. (Part No: 9N3527)$138.50 [Show Picture]
Steering Sector Gear (RH) - For models 9N, 2N. (Part No: 9N3526)$138.50 [Show Picture]
Steering Sector Gear Bushing - For models 9N, 2N. Priced per pair. Two halves needed per side. 2 pairs needed per tractor. Order 2 for complete tractor. (Part No: 9N3517)$15.92 [Show Picture]
Steering Sector Kit - 2 Kits used per tractor. Kit conatains Adjuster bolt, nut, washer, o-Rings, shims, felt seal. (Adjuster bolt is allen head type, not slotted like original). For models (8N 50-52), jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109)$18.55 [Show Picture]
Steering Sector Shaft Packing - 4 required per tractor. Sold in quantities of 2 pieces, minimum order is 2 pieces. Price shown is for 1 piece. For Models: 9N, 2N 1939-1947. (Part No: 9N3670)$7.08 [Show Picture]
Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For Models: NAA, 8N 1948-1954. (Part No: 8N3586)$6.44 [Show Picture]
Steering Sector, Right Hand - Has single gear (gear has 3 teeth followed by a wider spacer - followed by another 4 teeth ). Fits 8N s n 216989 & up, NAA, Jubilee, 3600, 800, 601, 901, 2000, 4000, (1953 ->1964). If yours does not have 7 teeth, you can use this part but must replace both right and left sides. Shaft cover must be (late style), see picture. (Part No: 251294)$153.04 [Show Picture]
Steering Shaft & Nut Assembly - RH Spiral w Single Bolt Sector Adjustor. For Models: 8N (1950->1952) (Part No: 8N3575B)$126.83 [Show Picture]
Steering Shaft Bearing - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE)$10.49 [Show Picture]
Steering Shaft Bearing And Cup Assembly - Replacement for Bearing Type. For models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft top and bottom. (Part No: 8N3571-52)$16.06 [Show Picture]
Steering Shaft Bearing Assembly - For Steering column (without power steering). Tractors: 8N & up (1948 to 1964). (Part No: 8N3517)$22.90 [Show Picture]
Steering Shaft Bearing Cone - FOr Models: 2N, 9N. (Part No: 4CB-TIM)$29.18 [Show Picture]
Steering Shaft Bearing Cup - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552)$9.78 [Show Picture]
Steering Shaft Bearing Kit - Kit consists of 6-TIM quantity 2, 5BC-TIM quantity 2, and 4CB-TIM quantity 2. For models 9N, 2N. (Part No: STEERING KIT)$93.75 [Show Picture]
Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3 4" OD. For Models: 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505)$36.90 [Show Picture]
Steering Shaft Grommet - Steering column to instrumental panel grommet. For tractors: 8N {1948-1952}. (Part No: 8N3578)$11 [Show Picture]
Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT)$29.99 [Show Picture]
Steering Wheel - For 2N, 9N. 17 5 8" Diameter, 11 16" Keyed hub, replaces OEM# 2N3600. Looks just like original with bare spokes! For 9N and 2N. (Part No: R2090)$33.75 [Show Picture]
Steering Wheel Dome Nut Washer - With Beveled edge. For Models: 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4CYL), 2030, 2111, 2120, 2130. (Part No: 356515S)$3.95 [Show Picture]
Steering Wheel Nut - Plain Metal Nut, Steering wheel Acorn Style. 5 8-18 for 9N and 2N (1939-1947) (Part No: 351103S)$7.52
Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 11\16 -20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack)$7.06 [Show Picture]
Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11\16 -20. CHROME PLATED. For Models: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC)$22.70 [Show Picture]
Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11 16". Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S)$7.74 [Show Picture]
Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1 2" diameter, 11 16 inch 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE)$40.00 [Show Picture]
Tie Rod Assembly - Includes 8N3314D tube with both ends and clamps, 35 in. center to center when both ends adjusted in to stop, 9 16" by 18 pitch stud, includes Zerk fittings. For Models: 2N, 8N, 9N. (Part No: 8N3314COMPLT)$65.98 [Show Picture]
Tie Rod Assembly - L/H - Like Original. Adjustable from 38.5 to 39.2 inches. (Part No: 9N3305-OEM)$92.26
Tie Rod Assembly - R/H - Like Original. Adjustable from 38.5 to 39.2 inches. (Part No: 9N3304-OEM)$92.26
 
Tools
Chain Binder - 1\4" chain binder, 2600 pound load limit. (Part No: LL104)$33.83 [Show Picture]
GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)$24.38 [Show Picture]
GREASE GUN CLAMP - Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102)$12.44 [Show Picture]
GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)$109.95 [Show Picture]
GREASE GUN POWERLUBER 14.4V W/CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)$270.05 [Show Picture]
GREASE GUN POWERLUBER 14.4V W/CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)$376.87 [Show Picture]
GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)$270.05 [Show Picture]
GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)$376.87 [Show Picture]
GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115)$8.1 [Show Picture]
GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118)$10.42 [Show Picture]
MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)$24.9 [Show Picture]
WIRE STRIPPER 4-WAY - 4-way wire stripper\crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)$9.88 [Show Picture]
Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002)$182.83 [Show Picture]
Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001)$209.43 [Show Picture]
 
Wheels
Bearing Cone, Front Wheel, Inner - Cone. For 2N, 9N (Part No: B1201)$10.38 [Show Picture]
Bearing Cone, Front Wheel, Outer - Tapered Cone. For Models: 2N, 9N. (Part No: B1216)$13.56 [Show Picture]
Bearing Cup, Front Wheel, Inner - Cup. For 2N, 9N (Part No: B1202)$9.52 [Show Picture]
Bearing Cup, Front Wheel, Outer - For Models: 9N, 2N. (Part No: B1217)$6.34 [Show Picture]
Bearing Cup, Rear Axle - Bearing, Tapered Cup For 4120, 600, 800, 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N4222)$10.28 [Show Picture]
Center Disc to Rear Axle Bolt - 1.87" long, 5 8" x 18 UNF RH threads. For Models: 2N, 9N. (Part No: 9N1117)$6.91 [Show Picture]
FRONT Tire and Tube - Single rib 4.00 x 19". For 8N, 9N, 2N. (Part No: R2073)$128.90 [Show Picture]
Front Rim - Front Rim with weight holes. 4.5" x 16", 2500 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 5.50" x 6.00" x 16" tires. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1015D)$58.58 [Show Picture]
Front Rim (Blank) - Blank (no center) front rim, 3" x 19". Center must be removed from old rim and welded into new rim. For 2N, 8N, 9N. Add additional $10.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R0651)$48.95 [Show Picture]
Front Rim - Heavy Duty - Front Rim with weight holes. 5.5" x 16", 3300 lb. capacity. 6 bolt, 6" circle, 4.62" pilot for 7.5" x 16" tires. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1007A)$64.92 [Show Picture]
Front Rim 4 x 19 - Fits 9N & 2N. 5 Lug. Rim size: 4.00"x 19.00" 9.75" pilot (center) hole. (Part No: 9N1015A)$112.79 [Show Picture]
Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner Cone(86609936), Inner Cup(86609935), outer Cone(86576860), Outer Cup(86577043), seal(NCA1190A). (Part No: CBPN1200A)$27.95 [Show Picture]
Front Wheel Cap - For 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, all 1939 to 1957. Front Wheel Cap. (Part No: 2N1139B)$11.64 [Show Picture]
Front Wheel Hub - For 8N, NAA. Front Wheel Hub. Uses CBPN1200A Wheel Bearing Kit and stud bolt C5NN1107F. (Part No: 86511582)$52.65 [Show Picture]
Front Wheel Nut - Front Wheel Nut EXACT copy of ORIGINAL. Hex style 11 16" O.D. Tractors: 9N, 2N (1939 to 1944). **Must order in multiples of 2, priced each. (Part No: 9N1012)$4.56 [Show Picture]
Front Wheel Nut Set, Set of 10 - Sold in quantities of 10, enter 10 for complete set. 10 1 2" - 20 wheel nuts. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1012B)$.72 [Show Picture]
Front Wheel Stud Bolt - Set of 10 - Front wheel stud bolt measures 1 2" X 2".- WITHOUT nuts. Note: Nuts are available by ordering p n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. ** Enter QTY 1, Price is for package of 10. (Part No: C5NN1107F)$16.77 [Show Picture]
Front Wheel Stud Bolt - Set of 10 - Front wheel stud bolt measures 1 2" X 2".- WITHOUT nuts. Note: Nuts are available by ordering p n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. ** Enter QTY 1, Price is for package of 10. (Part No: C5NN1107F)$16.77 [Show Picture]
Lug Nut, Rear Wheel - **Must order in quantities of 8, price shown is for 1. 5 8 inch, uses a 1 1 16 inch wrench. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134)$1.62 [Show Picture]
Rear Rim - 9x28 inch wide base demountable rim with 6 loop clamps. Fits tire size 11.2 x 28. Add $25.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: NCA1020C)$105.75 [Show Picture]
Rear Rim Carriage Head Bolt and Nut - 2 1 2 inch FF Carriage Head Bolt with nuts. UNIVERSAL - verify length. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250)$3.25 [Show Picture]
Rear Wheel Center - For 28" & 32" Wheels, 8N, Dexta, NAA, Jubilee, 501, 600, 800, 700, 2000 EARLY, 4000 EARLY. Center has a 4.25 inch pilot hole and mounting bolts are 6 inches across center-to-center. Add additional $10.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1036D)$183.17 [Show Picture]
Rear Wheel Rim Bolt - Qty of 1 for a Package of 12. Rear rim center disc to rim bolt, 5 8"-18 x 2-3 4", CGH head. For Models: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 1801. Order in Qty 1 for a package of 12. (Part No: 370938S36)$36.48 [Show Picture]
Seal, Front Wheel Hub, OEM - Dust seal to original spec. 2.00" ID, 2-11 16" OD. For Models: 9N, 2N, 8N, NAA, Jubilee all from 1939-53. (Part No: 9N1190B)$8.16 [Show Picture]
Seal, Front Wheel Hub - Front Wheel Hub Dust Seal. 2 11 16 O.D., 2 inches I.D. Fits, 2000 55-64 USA BUILT, 2N 39-47, 4000 55-64 USA BUILT, 600 55-64 USA BUILT, 700 55-64 USA BUILT, 800 55-64 USA BUILT, 8N 48-52, 900 55-64 USA BUILT, 9N, NAA 53-54.Sold in qty of 2, PRICE IS FOR EACH. Must be ordered in quantities of 2. Can replace 9N1190B. (Part No: NCA1190A)$3.10 [Show Picture]
Seal, Front Wheel Hub, OEM - Dust seal to original spec. 2.00" ID, 2-11 16" OD. For Models: 9N, 2N, 8N, NAA, Jubilee all from 1939-53. (Part No: 9N1190B)$8.16 [Show Picture]
TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)$14.66 [Show Picture]
TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual see-thru vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)$16.28 [Show Picture]
Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060)$37.60
Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058)$56.55
Wheel Stud, Rear - 5 8 inch -18 thread .690" O.D. on serration, lengh (without head) is 1 15 16 inches. For Models: 8N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, (4000 1958-1964). Must be ordered in quantities of 8, priced individually. (Part No: 312696)$1.74 [Show Picture]

View Cart
Cart

PayPal

Phone Orders
(800) 853-2651

 Customer Service 
(360) 379-4808

Monday - Friday
10:00-6:30pm
EST

Order online
anytime!



Your Shopping
is Secure!

Better Business Bureau Member

Member of the
Better Business Bureau
  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2013 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.