Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    PTO Overide Clutch • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

Ford 9N, 2N and 8N [ Turn Off Pictures ]   Brakes Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $59.15 [Enlarge Picture] Brake Backing Plate Felt Seal - For models 8N, NAA, JUBILEE. (Part No: 8N2217) $3.56 [Enlarge Picture] Brake Drum - For 8N, NAA, Jubilee. Add an additional $7.00 for weight for shipping per Drum. (Part No: 8n1126) $73.90 [Enlarge Picture] Brake Drum Repair Kit - For 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8m2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit. (Part No: 8NAA2250) $22.54 [Enlarge Picture] Brake Parts - Brake Shoe Set of Four shoes with bonded lining. For 9N and 2N. (Part No: 9N2019) $60.56 [Enlarge Picture] Brake Shoes - Brake Shoes For 8N, NAA, Jubilee - Set of 4. (Part No: 8N2200B) $43.45 [Enlarge Picture] Bushing - Bushing, brake cross shaft. Press into transmission housing. For tractors: 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $6.82   Clutch Clutch Alignment Tool - 1-3 8" 10 spline, .670" pilot. For Models: 9N, 2N, 8N, NAA, (600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 w single clutch). (Part No: S.70930) $14.95 Clutch Disc with springs - 9" Clutch Disc, Hub-1 3 8", Splines-10 on 1 3 8 inch hub, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by having springs. (Part No: 91A7550WHD) $42.58 [Enlarge Picture] Clutch Disk without Springs - 9" For Models: 2N, 600, 700, 800, 8N, 900, 9N. Like original. (Part No: NAA7550A) $56.70 [Enlarge Picture] Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. 9" Clutch & Pressure Kit For single clutch models, 3 & 4 speed transmission. Contains NEW: clutch cover, disc, release bearing, pilot bearing and alignment tool. (Part No: 8N7563K) $139.00 [Enlarge Picture] Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1 2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $6.60 [Enlarge Picture] Clutch Pedal Bushing - For 2N, 9N 1939-1947. Clutch pedal bushing split 2 piece. Price per each, min order qty is 2. Order will be increased to next multiple of 2. (Part No: 9N7508) $7.40 [Enlarge Picture] Clutch Pedal Shaft Bushing - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $6.50 [Enlarge Picture] Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7611B. (Part No: S.66657) $48.60 [Enlarge Picture] Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $4.06 [Enlarge Picture] Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, 600, 700, 800, 900 w single clutch. (Part No: 8N7563) $74.04 [Enlarge Picture] Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. (Part No: 78-7580A) $18.66 [Enlarge Picture] Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $20.39 [Enlarge Picture]   Cooling System Fan Belt - For 2N, 9N, 8N EARLY with front mount distributor. Alternator belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL) $9.95 [Enlarge Picture] Fan Blade - 4 Blade - For 9N, 8N, NAA. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $34.45 [Enlarge Picture] Fan Blade - 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $57.90 [Enlarge Picture] Fan Shroud - For 9N, 2N, 8N. Fan Shroud, Metal. Will not fit new replacement radiators. Will fit original radiators only. (Part No: 2N8146) $50.70 [Enlarge Picture] Radiator - High Quality Radiator for 9N, 2N, 8N. Copper Core - weight 16 lbs. Draincock included. 1 year warranty. (less cap). (Part No: 8N8005-C) $139.34 [Enlarge Picture] Radiator Cap - Plain, conventional type 4 psi pressure cap, less ornament. For tractors 9N, 2N, 8N. (Part No: 2N8100A-LW) $7.20 [Enlarge Picture] Radiator Cap, Black - For 9N, 2N, 8N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A) $7.82 [Enlarge Picture] Radiator Cap, Chrome - For 9N, 2N, 8N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615) $14.95 [Enlarge Picture] Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A) $2.72 [Enlarge Picture] Radiator Hood Pad - For models 9N, 2N, 8N. (Part No: 2N8032) $1.90 [Enlarge Picture] Radiator Hose Set - 8N S N 263844 and above. Lower Radiator Hose #8N8286 and Upper Radiator Hose #2N8260. (Part No: 8NL-HOSESET) $10.00 Radiator Mounting Pads - Package of Two. For models 9N, 2N, 8N, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. (Part No: C5NN8125A) $5.90 [Enlarge Picture] Radiator, Restoration Quality - This radiator is made like the original with a curved top tank (less cap). Copper core. For 9N, 2N, 8N. Draincock included. Meets or exceeds original manufacturers specification for cooling. 1 year warranty. (Part No: 8N8005-R) $262.68 [Enlarge Picture] Thermostat - 160 degree lo-temp. For tractors 9N, 2N, 8N. Fits in upper radiator hose, 2.250" long. (Part No: B2NN8575A) $24.01 [Enlarge Picture] Water Pump - For Models: 9N, 2N, 8N. (Part No: CDPN8501A) $39.85 [Enlarge Picture] Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B) $26.54 [Enlarge Picture] Water Pump Pulley - For Models: 2N, 9N. (Part No: 9N8606) $22.65 [Enlarge Picture]   Decals and Emblems Data Plate - Patent data plate, with drive screws to install. Restoration Quality. For tractors: 9N, 2N, {1939-1947}. (Part No: 9N14001) $8.86 [Enlarge Picture] Decal Set - For 8N, 2N, 9N. Decal for Fenders (2). Each decal is approx 8-3 4in. wide by 3-1 4in. tall. (Part No: R2006_) $17.36 [Enlarge Picture] Decals, Hood Set - For Models: 8N, 2N, 9N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005_) $12.81 [Enlarge Picture] Ford Script Painting Mask - Includes 1 small 5-3 8" x 2-1 4", and 1 large 8-5 8" x 3" painting masks. For Model: 8N. Application directions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.61441) $18.90 [Enlarge Picture] Hood Emblem - 8N (bright metal with red enamel background) (Part No: 8N16600A) $35.22 [Enlarge Picture] Plate - Patent data plate, with drive screws to install. For tractors: 8N, {1948-1952}. (Part No: 8N14001) $8.86 [Enlarge Picture]   Drive Train Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** (Part No: 8N4235C) $105.53 [Enlarge Picture] Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. This includes rear axle bearing and cup. Replaces 9N4222, 2N4221. (Part No: S.18516) $42.95 [Enlarge Picture] Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1 4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $21.98 [Enlarge Picture] Axle Collar - Collar, Axle For 2N, 9N (Part No: 9N4132) $13.00 [Enlarge Picture] Axle Kit, Rear - Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For Model: 8N 1947-1952. (Part No: AXLEKIT-8N) $171.60 [Enlarge Picture] Axle Oil Seal - For models 8N to S N 486753. Rear axle oil seals. Comes in qty of 2. (Part No: A8NN4251A) $24.96 [Enlarge Picture] Axle Oil Seal, Rear Inner - For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Sold in quantities of 5. Price is for 1. (Part No: 8N4290) $.56 [Enlarge Picture] Axle Outer Retainer - For models 8N to S N number 486753. Rear Axle Outer Retainer. This retainer comes with seal and gasket. Set of 2. (Part No: A8NN4248A) $25.74 [Enlarge Picture] Axle Outer Retainer Gasket - Requires 2. For Models: 8N 1948-1950. (Part No: 8N4225) $1.42 [Enlarge Picture] Axle Ring, Rear - For 8N 1948-1953. Sold in packages of 2, price is for each. (Part No: 8N4187) $1.50 [Enlarge Picture] Axle Seal, Inner Pair - Seal, Oil For 8N, JUBILEE, NAA.Enter QTY 1 For PKG of 2. (Part No: 8N4233A) $6.99 [Enlarge Picture] Axle Seal, Outer Pair - For models 8N S N 486753 UP, NAA, Jubilee. Comes in pairs. (Part No: D5NN4115A) $13.78 [Enlarge Picture] Axle Shaft Bearing - Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221) $37.95 [Enlarge Picture] Axle Shaft Nut, Rear - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA 1953-1955), NAB. (Part No: 8N4179) $6.64 [Enlarge Picture] Bearing, Transmission - Main Pilot Shaft Bearing Cone for 3 & 4 Speed Transmissions. For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, NAB. (Part No: 9N7120) $29.54 [Enlarge Picture] Boot - Transmission gear shift lever boot. For tractors: 8N, NAA. Bottom hole in boot is 1-1 2in. (Part No: 8N7277) $8.18 Center Disc to Axle Bolt - For Models: 2N, 9N. (Part No: 9N1117) $6.15 [Enlarge Picture] Countershaft - Fits 8N ((0620R) (Part No: 8N7111) $117.93 [Enlarge Picture] Differential Gasket Kit - 6 Pieces - Fits 9N, 2N, 8N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928) $8.96 [Enlarge Picture] Differential Pinion Bearing Cone - For Models: 2000 1965>, 2N 1939-52, 3000 1965>, 4110 1965>, 600 W 4 SP. TRANS. SN<54165 - 1958, 5 SP. SN<196155 - 1959, 601 W 4 SP. TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 8N 1939-52, 9N 1939-52, DEXTA 1957-1964, NAA 1953-54. (Part No: BB4221B) $20.48 [Enlarge Picture] Differential Pinion Bearing Cup - Bearing cup, differential bearing For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, DEXTA, JUBILEE, NAA (Part No: BB4222) $11.00 [Enlarge Picture] Differential Pinion Bearing Cup, Front - For Models: 2N 1939-52, 8N 1939-52, 9N 1939-52, DEXTA 1957-4 1962, NAA, Jubilee 1953-54. (Part No: BB4616B) $16.61 [Enlarge Picture] Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4 1962, NAA 1953-1954. (Part No: BB4621B) $30.95 [Enlarge Picture] Differential Pinion Pilot Bearing - For Models: 2N (1939-1952), 4120 W 4 SP. TRANS. S N 54166> - 1959>, 5 SP. S N 106115> - 1959>, 800 W 4 SP. TRANS. S N <54166 - 1958, 5 SP. S N <106115 - 1960, 801 W 4 SP. TRANS. SN54166> - 1959>, 5 SP. S N 106115> - 1959>, 8N (1939-1952), 9N (1939-1952) (Part No: BB4625B) $41.32 Gasket, Differential Center Housing, Side Cover - For Models: 2N, 8N, 9N. Sold in packages of 10. (Part No: 9N4131) $5.40 [Enlarge Picture] Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, NAB. Sold in quantities of 5. Price is for 1. (Part No: 9N7086) $0.44 [Enlarge Picture] Gasket, Paper Shim, For Bearing Retainer - Fits Ford 9N, 2N, 8N, NAA & Jubilee, Replaces #9N4130 & #8N4229 ``Note: (Use for seal between bearing retainer and axle housing or backing plate. Use in multiples to replace shims #8N4229. (Part No: 9N4130) $0.99 Gasket, Rear Axle Shaft - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2in., OD = 2 1 4in., width = 1 2in. (Part No: 8N4284) $2.20 [Enlarge Picture] Gear Shift Lever, w/ Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 3 8in. UNF thread for the shift knob (knob included) (the older shift levers had 5 16in. UNF thread). Note: uses gear shift knob p n BB7213A. Fits: 8N, NAA, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $58.06 [Enlarge Picture] Gear, 1st, 4 Speed Transmission - 60 28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $199.15 [Enlarge Picture] Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64)l, 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $55.82 [Enlarge Picture] Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All w 4 speed transmissions. (Part No: 8N7102) $180.44 [Enlarge Picture] Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $227.75 [Enlarge Picture] Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $91.52 [Enlarge Picture] Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $154.54 [Enlarge Picture] Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $59.90 [Enlarge Picture] Main Shaft Connecting Coupling - For 2000, 3000, 8N, NAA, Jubilee, all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $45.58 [Enlarge Picture] Oil Seal - Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $4.18 [Enlarge Picture] Pin - Gear Shift - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w 3 & 4 Speed transmission). (Part No: 9N7221B) $2.50 [Enlarge Picture] Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $12.52 [Enlarge Picture] Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. For tractors~ 9N, 2N, (1939-1947). 2.437-I.D. 3.485-O.D. For 2N, 9N. Comes in qty of 2. (Part No: D6NN4251A) $16.80 [Enlarge Picture] Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-seal fits over top of sweat collar. (Part No: SS92) $11.22 [Enlarge Picture] Rear Axle Washer - For model 8N. (price shown is for EACH, minimum Qty is 2. (Enter '2' in QTY box. ) (Part No: 8N4293) $2.48 [Enlarge Picture] Shifter Boot - Bottom hole is 7 8in. dia. For 2N, 9N, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. (Part No: C5NN7277C) $4.95 [Enlarge Picture] Thrust Washer, Transmission - 2.16" O.D, 1.75" I.D. For Model: 8N. (Part No: 8N7148) $7.64 Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $13.30 [Enlarge Picture] Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $11.42 [Enlarge Picture] Transmission Case to Center Housing Gasket - For Models: 9N, 8N, 2N. Must be ordered in quantity of 4, price is for 1. (Part No: 9N4662) $2.10 [Enlarge Picture] Transmission Drain Plug - Has 2.5 in. outside diameter. For tractors: 9N, 2N, 8N, NAA, {1939-1954}. Also filler plug for tractor:NAA {1953-1954}. (Part No: 9N7010) $9.54 [Enlarge Picture] Transmission Rebuild Kit - For 9N, 2N and 8N with 3 & 4 speed transmissions (1939-52). This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK3952) $78.58 [Enlarge Picture]   Electrical System (Starters, Generators, Coils, Wiring, etc.) 12 Volt Conversion Kit, Front Mount Distributor - 9N, 2N, 8N - Updates older 6-volt tractors to 12-volt charging system. For early 9N, 2N, 8N 1948-1951 with front mount distributor (distributor is right behind radiator), to S N 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm & belt. (Part No: 8NE10300ALT-C) $142.70 [Enlarge Picture] 12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes Unicharge alternator w-pulley, electrical resistor, wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm. (Part No: 8NL10300ALT) $133.72 [Enlarge Picture] Alternator Adjustable Arm - Alternator adjusting arm. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10304) $26.36 [Enlarge Picture] Alternator Base Bracket - Alternator Base Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10303) $34.95 [Enlarge Picture] Alternator Bracket, Base - Base alternator bracket. For 8N using side mount distributors. (Part No: 8NL10303) $31.92 Alternator Top Bracket - Alternator Top Mounting Bracket. For 2N, 9N, 8N - EARLY with front mount distributor. (Part No: 8NE10302) $29.95 [Enlarge Picture]