Farmall & IHC Tractors Discussion Board |
Re: Re: Removing old decals
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Trace Stoddard on January 20, 2001 at 05:52:01 from (208.133.184.86):
In Reply to: Re: Removing old decals posted by gene b on January 20, 2001 at 02:45:22:
In removing the decals it is really quite easy.. I work in a body shop and we use a tool thats works great and DOES NOT leave any scratchs or affect the paint in any way.. I see that you will be repainting anyway but the less you damage the surface the less work you will need to do in the long run.. This tool will cost you about 6-8 dollars and all you have to do is find a parts store that sells 3M products.. The 3M part # is 05701 and you can put this in a drill that turns around 4000 rpm and it will take your decals right off for you.. If you have any questions just e-mail me and I will help you out..
Follow Ups:
Home
| Forums
Today's Featured Article -
Ford N-Series Transmission/Hydraulic Fluid - The Full Story - by Llamas. The transmission fluid in an “N”:-series tractor lubricates the transmission, differential, rear wheel bearings, PTO and hydraulic pump drive, and it also cats as the working fluid for the hydraulic lift. In 9N/2N models, it also lubricates the steering sector and shaft system. The owner’s manual for the 9N and 2N models specified the use of only two fluids. They were STRAIGHT MINERAL OIL SAE 90 (above freezing) and
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|