Farmall & IHC Tractors Discussion Board |
Re: Farmall C ..help with oil change and amounts.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on January 10, 2001 at 06:47:03 from (129.37.117.114):
In Reply to: Farmall C ..help with oil change and amounts. posted by Trueby on January 09, 2001 at 15:44:25:
Here is what the manual says: Cooling system 13 quarts Crankcase 5 quarts Transmission 5 gallons Touch control(hydraulics) 6 3/4 pints Fill the touch control to the bottom of the fill hole with the rockshaft arms in the rear position. You will need to operate them back and forth several times to get the air out of the system. Then recheck with the arms in the rear position and refill to the bottom of the hole. Use Hytran fluid in the touch control, 30 wt in the engine (Unless the weather is really cold, then use a lighter weight, but be sure to change on warmer weather) and 90W gear oil in the tranny.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|